具有AIE效应的Eu(Ⅲ)-聚(N-乙烯基吡咯烷酮)配位聚合物Pdots的制备及双色肿瘤细胞成像

本研究通过原位引发聚合方法,以合成的4,4'-偶氮（4-氰基戊酸酯基）四苯乙烯（TPE-tetraAZO）为引发剂,引发乙烯基吡咯烷酮单体聚合,并通过侧链含孤对电子的N、O元素与稀土Eu（III）配位,成功制备四臂星型聚合物TPE-tetraPVP-Eu（III）,该双亲性聚合物可自组装成尺寸约为20 nm的非半导体型聚合物量子点（Pdots）.光学性能研究表明：该Pdots在360 nm和395 nm激发下分别发射蓝色（435 nm）和红色（615 nm）荧光,其中,Pdots的蓝色荧光具有典型的AIE特性,并对环境温度和pH具有明显双重响应特性,最低临界温度为37℃,接近人体温度.此外,Pdots表现出低细胞毒性,可通过调节激发波长,实现对HeLa、HepG2及A549三种肿瘤细胞的可逆双色荧光成像,展现出优异的成像效果,有望作为一种活细胞多色荧光示踪探针材料.     

二氧化碳刺激响应的荧光传感器*

CO₂刺激响应聚合物作为一种智能刺激响应材料,因其在可逆的调控过程中通常只涉及CO₂气体的通入和排出而具有广泛的应用前景。CO₂荧光传感器是将CO₂的浓度变化转化为可检测到的荧光信号,可实现对CO₂浓度的实时监测和可逆调控,也有助于我国如期实现2030年前碳达峰和2060年前碳中和的生态文明建设目标。本文简要介绍CO₂刺激响应物质的基本原理和常见分类方式,阐述该类物质在构筑荧光传感器方面的妙用,围绕响应灵敏性、响应速率、循环使用性和抗干扰性等传感性能指标的研究成果进行讨论。最后对CO₂刺激响应荧光传感器的改进方向和应用前景进行了展望。     

具有AIE效应的Eu(Ⅲ)-聚(N-乙烯基吡咯烷酮)配位聚合物Pdots的制备及双色肿瘤细胞成像

本研究通过原位引发聚合方法,以合成的4,4'-偶氮(4-氰基戊酸酯基)四苯乙烯(TPE-tetraAZO)为引发剂,引发乙烯基吡咯烷酮单体聚合,并通过侧链含孤对电子的N、O元素与稀土Eu(Ⅲ)配位,成功制备四臂星型聚合物TPE-tetraPVP-Eu(Ⅲ),该双亲性聚合物可自组装成尺寸约为20nm的非半导体型聚合物量子点(Pdots).光学性能研究表明:该Pdots在360 nm和395 nm激发下分别发射蓝色(435 nm)和红色(615 nm)荧光,其中, Pdots的蓝色荧光具有典型的AIE特性,并对环境温度和pH具有明显双重响应特性,最低临界温度为37℃,接近人体温度.此外,Pdots表现出低细胞毒性,可通过调节激发波长,实现对HeLa、HepG2及A549三种肿瘤细胞的可逆双色荧光成像,展现出优异的成像效果,有望作为一种活细胞多色荧光示踪探针材料.     

智能聚合物包覆的金纳米粒子*

本文综述了智能聚合物包覆的金纳米粒子的研究进展,重点介绍了智能聚合物包覆金纳米粒子的制备方法,包括原位合成法、配体置换法、表面引发聚合法和表面接枝聚合法等,以及智能聚合物包覆的金纳米粒子的智能响应类型,如温度敏感型、pH敏感型、pH/电解质双重敏感型、pH/温度双重敏感型、溶剂敏感型等。     

聚集诱导发光材料在聚合物制备及性能检测中的应用进展

聚集诱导发光(AIE)材料因其独特的发光性能,已在荧光检测、生物成像及有机发光器件等领域展现出较为广阔的应用前景。本文综述了AIE材料在监测聚合物制备过程(本体聚合、溶液聚合、乳液聚合及悬浮聚合过程等)中的应用,介绍了利用AIE分子的荧光信号响应检测聚合物玻璃化转变温度、粘度、相分离程度、分子量等物理性能的研究,为AIE材料在聚合过程可视化监测及聚合物荧光功能化领域的应用提供了参考。最后对AIE材料在高分子科学研究中的应用前景进行了展望。     

高效近红外聚集诱导发光纳米粒子用于生物成像的研究

基于荧光共振能量转移机理（FRET）,利用两亲性聚合物Pluronic F-127共包覆两种聚集诱导发光（Aggregation-induced Emission,AIE）材料TPABDFN和TPE-Me,制备了高效近红外发射TPABDFN/TPE-Me@F127纳米粒子.实验表明,这种聚合物纳米粒子具有很大的斯托克斯位移和较高的荧光量子效率,很好的单分散性、稳定性,以及较好的生物相容性和低的细胞毒性,对HepG2细胞进行荧光生物成像,得到很好的细胞成像效果.     

pH值响应的共轭聚合物纳米粒子的制备、表征与细胞成像研究

共轭聚合物纳米粒子（CPNs）因其高荧光亮度、低毒性、表面易修饰的特性,近年来在生物材料和生物医药领域备受关注。本论文中我们设计、合成了一种新的pH 值响应共轭聚合物（PFPA）,并通过纳米沉淀方法制备了其纳米粒子。动态光散射实验表明PFPA纳米粒子在水中分散性较好,其粒径约为8 nm。 PFPA纳米粒子的最大吸收峰为379 nm,其摩尔吸光系数为2.1×10⁶ L·mol -1·cm -1;另外该纳米粒子的荧光最大发射峰为422 nm,其荧光量子产率为35%。PFPA纳米粒子在汞灯（100瓦）照射下表现出较好的光稳定性,另外MTT实验表明其具有较低的细胞毒性。该纳米粒子具有pH响应的光学特性,并可以用于活细胞成像。PFPA纳米粒子在癌症诊断、药物与基因传递等方面具有潜在的应用价值。     

末端四苯乙烯荧光团标记法研究双亲性嵌段聚合物的自组装行为

以四苯乙烯类分子2-溴-2-甲基-丙酸-3-(4-三苯乙烯基-苯氧基)-丙醇酯(E)作为引发剂,N-异丙基丙烯酰胺和苯乙烯为原料,通过活性自由基聚合,合成了末端具有聚集诱导发光(AIE)活性发光体的双亲性嵌段聚合物G。 详细研究了AIE活性引发剂E和嵌段聚合物G在不同状态下的光物理行为差异。结果表明,在相同浓度条件下,随着温度的升高,引发剂E分散液的荧光强度不断下降。 而嵌段聚合物的荧光强度先上升,当温度超过37 ℃后,嵌段聚合物的荧光强度不断下降。 同样地,通过改变引发剂E和嵌段聚合物G在四氢呋喃和水混合溶剂中的浓度发现,随着浓度的减小,引发剂E的荧光强度不断下降,而嵌段聚合物分散液在改变分散液浓度时荧光强度的变化规律和改变温度时荧光强度的变化趋势相似。 通过监控双亲性嵌段聚合物末端挂接的AIE活性发光分子发光性质的变化可以间接表征其聚集态结构的变化。     

刺激响应型生物医用聚合物纳米粒子研究进展

近十几年来, 纳米科学的发展极大地推动了纳米材料在生物医用领域的应用. 聚合物纳米粒子由于其独特的性能在药物传递、医学成像等医用领域备受关注. 其中, 刺激响应型聚合物纳米粒子是一类可以在外界信号刺激下(包括pH、温度、磁场、光等)发生结构、形状、性能改变的纳米粒子. 利用这种刺激响应性可调节纳米粒子的某种宏观行为, 故而刺激响应型聚合物纳米粒子也被称为智能纳米粒子. 因为其特有的“智能性”, 刺激响应型聚合物纳米粒子的研究已成为当前生物材料领域的研究热点. 本文综述了几类重要的生物医用刺激响应型聚合物纳米粒子, 侧重介绍双重及多重刺激响应型聚合物纳米粒子的制备及其生物医学应用.     

基于点击化学和活性自由基聚合方法制备双重响应金纳米粒子

采用点击化学和可逆加成断裂链转移活性自由基聚合方法制备了温度和pH双重响应的金纳米粒子. 通过红外光谱(FTIR)、X射线光电子能谱(XPS)、透射电子显微镜(TEM)及热重分析(TGA)等方法对双重响应性金纳米粒子进行了表征. 该金纳米杂化粒子具有良好的分散性, 其表面接枝聚合物的密度约为0.6 Chain/nm2. 通过改变温度和pH条件, 考察了金纳米杂化粒子的可逆响应行为. 实验结果表明, 点击化学和可逆加成断裂链转移活性自由基聚合方法实现了金纳米粒子修饰的简单化、可控化以及功能化.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.