橡胶／纳米无机粒子增韧增强环氧树脂的研究

综述了当前环氧树脂增韧增强改性的研究现状,详细介绍了弹性体增韧环氧树脂、无机纳米粒子改性环氧树脂、粘土改性环氧树脂、纳米SiO2改性环氧树脂以及弹性体／无机纳米粒子协同增韧增强环氧树脂的机理和实验方法。并对其实验结果进行了分析比较。     

聚氨酯改性环氧树脂的研究进展

环氧树脂具有优异的粘接性能和力学性能因而被广泛应用,但其耐热性差、脆性大等缺陷限制了其在高性能领域中的应用。聚氨酯具有高弹性、耐磨、抗撕裂等特点,且与环氧树脂相容性好。因此,利用聚氨酯改性环氧树脂能显著提高其力学性能,实现环氧树脂在众多领域的应用。本文综述了不同类型的聚氨酯改性环氧树脂的进展,指出了不同类型的聚氨酯改性环氧树脂的机理、改性效果及影响因素,并对其发展前景进行展望。     

有机氟改性环氧树脂的研究进展

利用有机氟改性环氧树脂是提高环氧树脂综合性能的有效途径。目前含氟环氧树脂已经成为学者研究的重点。文章扼要综述了有机氟对改善环氧树脂的表面性能、耐热性能、介电性能、耐摩擦性能及阻燃性能的最新研究进展。展望了有机氟改性环氧树脂的发展趋势。     

有机硅改性环氧树脂的合成与性能研究

用氨基硅油和双酚A型环氧树脂为原料合成一种新型的环氧树脂。研究了不同反应时间、不同反应温度以及不同氨基硅油含量对改性环氧树脂性能的影响,用热重法对改性树脂的耐热性进行了表征。结果表明,用工业产的氨基硅油合成的改性环氧树脂同样具有良好的韧性和耐热性。     

咪唑固化不同类型环氧树脂的固化特征、固化动力学及其反应活性

以咪唑为固化剂,对缩水甘油醚型、缩水甘油酯型环氧树脂(简称链型环氧树脂)及脂环环氧树脂的固化特征、固化动力学及反应活性进行了研究.DSC实验结果表明,固化过程均分两阶段进行,链型环氧树脂固化反应表观活化能低于脂环环氧树脂.各树脂第一阶段的表观反应活化能均低于第二阶段活化能.当脂环环氧树脂中混入不同比例的链型环氧树脂后,固化反应速率均较脂环环氧树脂单独固化时快,当链型环氧树脂量大于50％时,更为明显.     

噁唑烷酮环氧树脂的研究进展

含噁唑烷酮结构的树脂具有优良的耐热性、电性能及物理机械性能等。将噁唑烷酮环引入环氧树脂,可提高固化物的玻璃化转变温度、粘结性、介电性和阻燃性等。本文综述了噁唑烷酮环氧树脂的一般合成方法,探讨了原料配比、反应温度、催化剂种类及用量对噁唑烷酮环氧树脂合成过程的影响,分析了固化剂与噁唑烷酮环氧树脂固化产物性能之间的联系,对噁唑烷酮环氧树脂在绝缘材料、涂料、粘合剂、印刷电路板以及高性能树脂基体等领域的应用情况进行了详细介绍,并对其发展前景予以展望。     

有机硅改性环氧树脂的新进展

热固性环氧树脂材料具有良好的物理、化学等诸多优异性能,对于金属和非金属材料的表面都具有优异的粘接强度,可用于浇注、浸渍、层压、粘接剂、涂料等,用途十分广泛。由于环氧树脂材料存在脆性大,抗冲击性差、耐热性差等缺点,科研工作者对环氧树脂进行了大量的改性研究并取得了丰硕的成果。有机硅化合物改性环氧树脂在提高其热氧稳定性、韧性以及耐烧蚀性能等方面具有独特的优势,近年来,研究人员利用功能性有机硅化合物或聚合物在环氧树脂进行改性方面,开展了反应共聚改性、作为交联剂固化改性、与环氧树脂共混/交联改性、增容改性、互穿聚合物网络(IPN)、引入阻燃剂结构改性以及微纳米复合改性等方面的研究,取得了很多新的成果。本文旨在总结上述各种有机硅改性环氧树脂研究的新进展,并预测了有机硅改性环氧树脂材料的潜在应用和发展方向。     

端噁唑啉聚醚对环氧树脂的固化与增韧作用的研究

用IR、DSC等分析方法研究了端2-噁唑啉聚环氧丙烷(活性聚醚)与环氧树脂的固化反应,对固化机理作了讨论。并考察了不同分子量活性聚醚对环氧树脂的增韧作用。结果表明,此活性聚醚对环氧树脂增韧效果明显,固化树脂综合性能较好。     

环氧树脂专用乳化剂的合成

环氧树脂固化物具有优异的物理化学性能,尤其以优良的耐水性、耐化学品性、极佳的粘附性能而广泛应用于涂料领域。环氧树脂不溶于水,现有的环氧树脂涂料大多采用有机溶剂体系,有悖于社会对环境友好的要求和无污染或少污染涂料的发展方向,水性涂料因此得到了迅速发展。环氧树脂有     

钛酸钾晶须填充环氧树脂复合材料的摩擦磨损特性

以提高环氧树脂的摩擦磨损性能为目的,研究了钛酸钾晶须(PTW)填充环氧树脂复合材料的滑动干摩擦磨损特性,着重探讨PTW含量、摩擦条件等对复合材料摩擦性能的影响.通过对复合材料磨损表面的形貌分析以及复合材料表面硬度的测定,探讨了复合材料的磨损机理.结果表明:PTW能明显提高环氧树脂耐磨性并降低其摩擦系数,w(PTW)=0.08的环氧树脂复合材料的耐磨性比纯环氧树脂提高近10倍,摩擦系数降低35%.     

FTIR法研究环氧树脂固化反应动力学

用傅里叶红外光谱（ＦＴＩＲ）法研究了双酚Ｓ环氧树脂和甲溴双酚Ａ环氧树脂分别与二胺基二苯砜在恒温条件下的固化反应动力学,得出了各反应的表观活化能。     

Fire Retardancy of Aluminum Hydroxide Reinforced Flame Retardant Modified Epoxy Resin Composite

A novel phosphorous containing flame retardant epoxy resin is synthesized by modifying the epoxy resin initially with phosphoric acid and further with aluminum hydroxide (ATH) to enhance the fire retardancy of the modified epoxy resin. The several phosphorous modified epoxy resin to ATH mass ratios were used to study the effect of ATH addition on epoxy. Thermal and mechanical properties. The structure of the modified flame retardant epoxy resin was characterized using Fourier-transform infrared spectroscopy (FTIR) while thermal degradation behavior and flame retardant properties were examined using thermo-gravimetric analysis (TGA) and UL-94 testing. Furthermore, ultimate tensile strength and young modulus were analyzed to study the effect of ATH addition on mechanical properties. The findings indicated that fire retardancy of ATH reinforced modified ep oxy resin is higher than virgin and phosphorous modified epoxy resin and depicted eminent flame retardant properties with suitable mechanical properties.

     

含磷有机硅杂化环氧树脂固化体系性能研究

通过磷酸与γ-环氧丙氧基三甲氧基硅烷反应得到含磷有机硅氧烷,并加入到环氧树脂/4,4'-二氨基二苯基甲烷体系中混合,通过溶胶-凝胶的方法制备了含磷有机硅杂化环氧树脂固化物.对固化体系进行了玻璃化转变温度、热失重、阻燃、拉伸强度、冲击强度测试分析.结果表明,该固化体系的阻燃性得到提高,极限氧指数在25.8～29.3,玻璃化转变温度得到提高,在161～179℃;虽然初始分解温度比纯环氧树脂固化物低,但800℃残炭率可以达到26.5%,提高了36%;拉伸强度得到提高,在71～94 MPa,冲击强度可以达到14.36 kJ/m2,提高了14%.该固化体系具有较好的阻燃性能和热性能,同时具有较好的力学性能.     

聚氨酯/环氧树脂互穿网络硬质泡沫塑料反应过程和微观结构

聚氨酯／环氧树脂互穿网络(PU／EPIPN)硬泡中异氰酸根的消耗速度较纯PU硬泡高，是由于环氧树脂的固化荆同时也是异氰酸根反应的催化荆。而PU／EP IPN硬泡中环氧基的反应速度和反应程度均较纯EP网络低，归因于互穿网络对基团扩散的阻碍。在互穿网络硬泡形成过程中，存在环氧开环中所新产生的羟基与异氰酸根的反应、大分子多元醇中羟基与环氧基的反应以及异氰酸根与环氧基形成嗯唑烷酮的反应三种形成网络间的化学键的途径。同时由于PU／EPIPN硬泡高度的交联，使得IPN硬泡中两个网络具有良好的相容性。动态力学性能表明所有IPN样品都只有一个玻璃化温度。透射电镜表明IPN样品无明显的相界面。     

Chemical recycling of carbon fibre reinforced epoxy resin composites in subcritical water: Synergistic effect of phenol and KOH on the decomposition efficiency

The combination of phenol and potassium hydroxide (KOH) was used to chemically recycle carbon fibre reinforced epoxy resin cured with 4,4′-diaminodiphenylmethane in subcritical water. This combination had a synergistic effect on decomposing this kind of epoxy resin. The main decomposition products from the epoxy resin were identified by means of GC-MS, and a possible free-radical reaction mechanism for the decomposition of epoxy resin is proposed. The recovered carbon fibres were characterized using single fibre tensile tests, scanning electron microscopy and X-ray photoelectron spectroscopy. Compared to virgin carbon fibres after sizing removal, the surface compositions of the recovered carbon fibres had little change and the tensile strength of the recovered carbon fibres was well retained.     

Study on liquid oxygen compatibility of bromine‐containing epoxy resins for the application in liquid oxygen tank

The liquid oxygen compatible epoxy resin was obtained by the polycondensation between tetrabromobisphenol A and neat epoxy resins. The results of liquid oxygen impact test indicated that the synthetic epoxy resins were compatible with liquid oxygen. The relationship between impact reaction sensitivity (IRS) and flame retardancy were studied by liquid oxygen impact test and limiting oxygen index test. The results showed that the flame‐retardant modification of epoxy resin was valuable to reduce the IRS. The thermal gravimetric analysis results indicated that the Br · radical was quickly released in relatively low temperature (approximately 370°C) for compatible epoxy resin. The Br · radical was a key factor to promote the epoxy resin compatible with the liquid oxygen. The X‐ray photoelectron spectroscopy was used to survey the distribution of functional groups on the surface of samples before and after impact. The results showed that the oxidation reaction and carbonization process may occur on the surface of samples after impact. The liquid oxygen compatibility mechanism is proposed in this paper. The bromine‐containing epoxy resin has the potential to be the material used in liquid oxygen tank. Copyright © 2015 John Wiley & Sons, Ltd.     

Crystallization behavior of dynamically cured polypropylene/epoxy blends

Dynamically cured polypropylene (PP)/epoxy blends compatibilized with maleic anhydride grafted PP were prepared by the curing of an epoxy resin during melt mixing with molten PP. The morphology and crystallization behavior of dynamically cured PP/epoxy blends were studied with scanning electron microscopy, differential scanning calorimetry, and polarized optical microscopy. Dynamically cured PP/epoxy blends, with the structure of epoxy particles finely dispersed in the PP matrix, were obtained, and the average diameter of the particles slightly increased with increasing epoxy resin content. In a study of the nonisothermal crystallization of PP and PP/epoxy blends, crystallization parameter analysis showed that epoxy particles could act as effective nucleating agents, accelerating the crystallization of the PP component in the PP/epoxy blends. The isothermal crystallization kinetics of PP and dynamically cured PP/epoxy blends were described by the Avrami equation. The results showed that the Avrami exponent of PP in the blends was higher than that of PP, and the crystallization rate was faster than that of PP. However, the crystallization rate decreased when the epoxy resin content was greater than 20 wt %. The crystallization thermodynamics of PP and dynamically cured PP/epoxy blends were studied according to the Hoffman theory. The chain folding energy for PP crystallization in dynamically cured PP/epoxy blends decreased with increasing epoxy resin content, and the minimum of the chain folding energy was observed at a 20 wt % epoxy resin content. The size of the PP spherulites in the blends was obviously smaller than that of PP. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1181–1191, 2004     

Improved flame retardant properties of epoxy resin by fluorinated MMT/MWCNT additives

Flame retardant additives of montmorillonite (MMT) and multi-walled carbon nanotube (MWCNT) were embedded in epoxy resin to improve the resin's flame retardant properties. MMT was fluorinated to exfoliate its layers and enhance its dispersion into the epoxy resin. The MWCNT was also fluorinated to create hydrophobic functional groups for improved dispersion into the epoxy resin. The MWCNT reduced the degradation rate of the epoxy resin and increased the char yield. Limiting oxygen index also increased showing first order against char yield. The exfoliated MMT acted as an energy storage medium to hinder thermal transfer within the epoxy resin. The activation energy increased almost two times by fluorinated MMT/MWCNT additives. The fluorination of the additives, MMT and MWCNT significantly improved the flame retardant properties of the epoxy resin.     

Effect of Epoxy Resin on the Thermal,Mechanical and Rheological Properties of Polybutylene Terephthalate/Glycidyl Methacrylate Functionalized Methyl Methacrylate-butadiene Blend

Epoxy resin was used to modify polybutylene terephthalate(PBT) and glycidyl methacrylate functionalized methyl methacrylate-butadiene(MB-g-GMA) blend. Results show that MB-g-GMA dispersed in PBT matrix uniformly and PBT/MB-g-GMA/epoxy blends reveal good compatibility. However, the added epoxy resin restricted the mobility of PBT macromolecular chains during the growth process of the crystal, which reduced the final crystallinity of PBT. The PBT/MB-g-GMA blend containing 1%(mass fraction) epoxy resin exhibited good mechanical properties. For example, the notched impact strength of the PBT/MB-g-GMA blend with 1%(mass fraction) epoxy resin was about 2 times that of PBT/MB-g-GMA blend. Sanning electron microscope(SEM) results show that the shear yielding of the PBT matrix and the cavitations of rubber particles were the major toughening mechanisms. The chemical reaction between PBT and epoxy resin induced the high complex viscosity and storage modulus of PBT/MB-g-GMA blend.