有机-无机杂化膜的研究进展

有机-无机杂化膜由于具备了无机膜和有机膜各自的特点,具有良好的分离特性和物化稳定性,因而成为当前膜技术领域新型膜材料研究的热点.本文主要介绍了近年来国内外有机-无机杂化膜的研究现状、杂化膜的制备方法、结构和应用.     

有机-无机杂化膜的研究进展

有机-无机杂化膜结合了传统有机膜与无机膜的优良性能,已成为膜领域的研究热点之一。本文综述了有机-无机杂化膜的研究现状,归纳了有机-无机杂化膜的分类、制备技术、应用及其优越性,并针对现存的问题及今后的研究发展提出了一些建议。     

有机-无机杂化分离膜研究进展

有机-无机杂化膜材料结合了有机膜材料和无机膜材料的优良性能,已成为分离膜材料研究的一个热点。本文以有机、无机组分间相互作用类型对其进行分类,着重介绍组分间以化学键相结合的有机-无机杂化膜的优良特性,总结了影响此类杂化膜结构和性能的主要因素,概括了它在膜分离中的应用,提出了目前研究工作中存在的不足,并做出了简要的述评。     

硫醇-烯/炔点击化学制备有机/无机杂化材料

有机/无机杂化材料因其独特、优异的结构和性能已经成为目前材料领域的研究热点,硫醇-烯/炔点击化学是近年发展起来的一类新型点击化学,以其反应条件温和、速率快、产率高、产物容易分离以及高度选择性等优点受到国内外研究者的广泛关注。本文综述了近年来硫醇-烯/炔点击化学制备有机/无机杂化材料的研究进展,重点介绍了利用硫醇-烯/炔点击化学制备硅类、碳类、金属及金属氧化物类有机/无机杂化材料,并归纳了这些有机/无机杂化材料在生物医用、环境保护、光电材料等方面的应用,最后展望了硫醇-烯/炔点击化学制备有机/无机杂化材料未来的发展方向。     

溶胶-凝胶法制备有机/无机杂化材料工艺及其应用

介绍了溶胶–凝胶法制备有机/无机杂化材料的原理和基本过程,杂化材料的制备方法及对材料性能的影响,概述了杂化材料在结构材料、光学材料及其它材料中的应用研究。     

溶胶-凝胶法制备光固化聚氨酯丙烯酸酯杂化材料的研究

以溶胶-凝肢法制备的硅溶胶为无机相,聚氨酯丙烯酸酯为有机相,以γ-甲基丙烽酰氧丙基三甲氧基硅烷(TMSPM)为两相间的偶联剂,制得了光固化杂化材料。研究了未固化的杂化体系的稳定性问题,并对其进行了结构表征和性能研究。无机相与有机相通过共价键相连。使得杂化体系光固化膜高硬度的获得并没有以柔韧性的损失为代价。在无机物含量较低时,聚氨酯丙烯酸酯／二氧化硅杂化体系先固化膜的耐磨性略有提高。     

有机-无机杂化材料在质子交换膜中的应用

质子交换膜是燃料电池中的核心组件,起着分隔阴极阳极、传导载流子等作用。然而,目前的膜材料在质子传导率、尺寸稳定性等方面仍有较大不足。有机-无机杂化材料兼备了有机、无机材料各自的优点,作为质子交换膜具有良好的应用前景。本文综述了近年来有机-无机杂化材料在燃料电池质子交换膜方面的研究进展,介绍了金属盐、金属纳米粒子掺杂、二氧化硅及硅氧烷掺杂,以及氧化石墨烯或粘土掺杂等三种方法制备的质子交换膜,并从制备方法、性能等方面分析了每种质子交换膜的优缺点。     

可聚合纳米无机氧化物杂化材料的制备及其在紫外光固化涂料中的应用

可聚合纳米无机氧化物杂化材料在紫外光固化涂料中具有较好的分散性能.与涂料中的单体和预聚物进行光聚合形成有机/无机杂化网络结构的聚合物,从而提高涂料固化膜的热稳定性能、硬度和耐磨性能等,在紫外光固化涂料的制备方面有着广阔的应用前景.目前,该类杂化材料主要采用硅烷偶联剂改性、化学接枝改性和溶胶一凝胶方法制备.本文就可聚合纳...     

聚甲基丙烯酸丁酯/(SiO2-TiO2)杂化材料的研究

以γ-甲基丙烯酰氧丙基三甲氧基硅烷(TMSPM)为偶联剂，用溶胶一凝胶法制备了聚甲基丙烯酸丁酯／(SiO2-TiO2)杂化材料，进行了结构表征和性能研究。经电镜观察，杂化体系固化膜两相间结合紧密，无机相是一种粒径介于10～20nm之间的球形颗粒。实验结果表明：杂化体系固化膜均匀性好和热氧化稳定性得到很大提高。由于无机相与有机相通过共价键相连，聚甲基丙烯酸丁酯／(SiO2-TiO2)杂化材料在无机物含量较高时，仍能保持良好的柔韧性。     

含钒无机有机杂化材料的合成、结构与性质

含钒无机有机杂化材料的结构复杂多样,在吸附、氧化还原、电化学、催化、光学、磁学以及多孔、手性材料研究等方面应用前景广阔,引起人们广泛关注。本文综述了含钒无机有机杂化材料研究的最新进展,介绍了合成含钒无机有机杂化材料的主要方法,按照有机组分与无机骨架作用的方式分类总结了含钒无机有机杂化材料的结构,介绍了其在离子交换、电化学、磁学、光学、催化等方面的应用,并展望了该类材料的研究前景和意义。     

Inorganic membranes and solid state sciences

The latest developments in inorganic membranes are closely related to recent advances in solid state science. Sol–gel processing, plasma-enhanced chemical vapor deposition and hydrothermal synthesis are methods that can be used for inorganic membrane preparation. Innovative concepts from material science (templating effect, nanophase materials, growing of continuous zeolite layers, hybrid organic–inorganic materials) have been applied by our group to the preparation of inorganic membrane materials. Sol–gel-derived nanophase ceramic membranes are presented with current applications in nanofiltration and catalytic membrane reactors. Silica membranes with an ordered porosity, due to liquid crystal phase templating effect, are described with potential application in pervaporation. Defect-free and thermally stable zeolite membranes can be obtained through an original synthesis method, in which zeolite crystals are grown inside the pores of a support. Hybrid organic–inorganic materials with permselective properties for gas separation and facilitated transport of solutes in liquid media, have been successfully adapted to membrane applications. Potential membrane developments offered by CVD deposition techniques are also illustrated through several examples related to the preparation of purely inorganic and hybrid organic–inorganic membrane materials.     

Preparation and Properties of Hybrid Silane-crosslinked Sulfonated Poly(aryl ether ketone)s as Proton Exchange Membranes

A series of novel organic-inorganic hybrid proton-conducting electrolyte membranes with silane-crosslinked sulfonated poly(aryl ether ketone)(SC-SPAEK) networks was prepared via a simple procedure that includes solution casting and acid treatment. The organosilicon pendants of the silane-grafted SPAEK, which were expected to serve as coupling and crosslinking agents, were found to play a key role in the homogenous dispersion of inorganic particles and improved the performance of hybrid membranes. The hybrid membranes exhibited enhanced proton conductivity, and SC-SPAEK/TiO2-4 showed an extremely high proton conductivity of 0.1472 S/cm at 100℃. The crosslinked hybrid membranes also demonstrated good chemical resistance, oxidative stability, and mechanical properties. The crosslinked hybrid membranes with excellent comprehensive performance may be a promising material for proton exchange membrane fuel cells.     

Pervaporation performance of novel chitosan‐POSS hybrid membranes: Effects of POSS and operating conditions

Four types of polyhedral oligosilsesquioxane (POSS)–octaanion, octaammonium, octanitrophenyl, and octaaminophenyl–were incorporated into chitosan (CS) to fabricate inorganic–organic hybrid membranes. The hybrid membranes were employed for the pervaporation dehydration of ethanol aqueous solutions. The performance of the hybrid membranes was found to be influenced by the type and loading amount of POSS. In comparison with the neat CS membranes which showed a separation factor of 65.2 for 10 wt % water in the feed at 303 K, the hybrid membranes containing 5 wt % of octaanion and octaaminophenyl POSS showed high separation factors of 305.6 and 373.3, respectively. The effects of the operating conditions such as the feed composition and temperature on the pervaporation performance of the membranes were investigated. Activation energies for permeation in the membranes were estimated from Arrhenius relationship. The activation energies for ethanol permeation in the hybrid membranes were much higher than that in the CS membrane, which may account for the large enhancements in the selectivity of the hybrid membranes. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

Poly(vinyl alcohol) (PVA)/sulfonated polyhedral oligosilsesquioxane (sPOSS) hybrid membranes for direct methanol fuel cell applications

Organic/inorganic hybrid membranes based on poly(vinyl alcohol) (PVA) and sulfonated polyhedral oligosilsesquioxane (sPOSS), crosslinked by ethylenediaminetetraacetic dianhydride (EDTAD), were prepared as candidate materials for proton exchange membranes in direct methanel fuel cell (DMFC) applications. Fourier transform infrared (FT‐IR) spectroscopy and ion exchange capacity measurements for the prepared networks clearly revealed sPOSS incorporation. We found that proton conductivity increased and methanol permeability decreased with increasing sPOSS content in the hybrid membrane. In particular, our hybrid membranes demonstrated proton conductivities as high as 0.042 S/cm, which is comparable to that of Nafion?, while exhibiting two orders of magnitude lower methanol permeability as compared to Nafion?. We postulate that the polar sulfonic acid groups of the incorporated sPOSS cages assemble to provide ion conduction paths while the hydrophobic portions of the same sPOSS cages combine to form a barrier to methanol permeation with improved thermal stability of the hybrid membrane. Copyright © 2007 John Wiley & Sons, Ltd.     

Sol-gel法在燃料电池用质子交换膜制备中的应用

主要综述了溶胶-凝胶(sol-gel)法在制备质子交换膜中的应用。将Sol-gel法应用到质子交换膜的制备中,提供了一种制膜和优化膜的行之有效的途径。本文着重从利用sol-gel法制备有机/无机杂化型、磷酸/二氧化硅型以及全氟磺酸膜的改进型质子交换膜等方面加以介绍。     

Highly‐Ordered Hybrid Organic‐Inorganic Isoporous Membranes from Polymer Modified Nanoparticles

Summary: Organic‐inorganic hybrid materials consisting of nanosized silica particles with surface grafted PS or PS‐b‐PMMA were synthesized using ATRP. These hybrid materials were used in the fabrication of highly‐ordered isoporous membranes. Optical characterization revealed that the membranes consisted of hexagonally ordered pores of uniform size. The combination of an open pore structure and high surface area makes isoporous membranes into materials of high interest in fields as biotechnology and photonics.

Image from optical microscope of hybrid nanoparticle membrane of SiO₂‐g‐PS with hexagonally‐ordered pores.     

Gas permeation of porous organic/inorganic hybrid membranes

Selective gas permeation of porous organic/inorganic hybrid membranes via sol-gel route and its thermal stability are described. Separation performance of the hybrid membrane was improved compared with porous membranes governed by the Knudsen flow, and gas permeability was still much higher than that through nonporous membranes. Additionally, it was shown that these membranes were applicable at higher temperatures than organic membranes.SEM observation demonstrated that the thin membrane was crack-free. Nitrogen physisorption isotherms showed the pore size was in the range of nanometers. Gas permeability through this membrane including phenyl group was in the range of 10^–8 [cc(STP) cm/(cm² s cmHg)] at 25°C. The ratios of O₂/N₂ and CO₂/N₂ were 1.5 and 6.0, respectively, showing the permeation was not governed by the Knudsen flow. The permeability decreased as the temperature increased. Furthermore, the specific affinity between gas molecules and surface was observed not only in the permeation data of the hybrid membranes but in the physisorption data. These results suggested that the gas permeation through the hybrid membrane was governed by the surface flow mechanism.Thermal analysis indicated that these functional groups were still stable at higher temperatures. The phenyl group especially remained undamaged even at 400°C.     

Novel nylon-supported organic-inorganic hybrid membrane with hierarchical pores as a potential immobilized metal affinity adsorbent

Chitosan-based porous organic-inorganic hybrid membranes supported by microfiltration nylon membranes were prepared, in which gamma-glycidoxypropyltrimethoxysilane (GPTMS) was used as an inorganic source as well as crosslinking reagent. Polyethylene glycol (PEG) with different molecular weight and content was used as imprinting molecule for morphology control. In situ crosslinking of chitosan and simultaneous polymerization of GPTMS in PEG template environment endowed the hybrid membrane with specific characteristics. Distinct hybrid effect between chitosan (CS) and GPTMS was revealed by shifting in X-ray diffraction (XRD) pattern, decomposition in simultaneous thermogravimetry and differential scanning calorimetry (TG/DSC) testing. As manifested by scanning electron microscopy (SEM), the molecular weight and content of PEG had remarkable effect on the resulting surface morphology of the hybrid membrane and a given surface morphology could be obtained by extracting of the imprinted PEG molecular. Among three types of porogen used: PEG 400, PEG 4000 and PEG 20000, only PEG 20000 could result in a porous surface. Moreover, a special porous surface with three-dimensional (3D) hierarchical structure-in-structure pore fashion was obtained when content of PEG 20000 was controlled at 15%. Experimental results also showed that the hybrid membrane had low swelling ratio and high stability in acidic solution. After conveniently coordinated with copper ions, the porous metal chelating hybrid membrane could effectively adsorb the model protein, bovine serum albumin (BSA). As expected, the hybrid membrane imprinted with 15% PEG 20000 had remarkably high copper ion binding and BSA adsorption capacity, which might result from the large surface area, high ligand density and suitable interconnected 3D hierarchical porous surface.     

Evaluation of hybrid silica sols for stable microporous membranes using high-throughput screening

Microporous membranes are a promising option for energy-efficient molecular separations. Long-term hydrothermal stability of the membrane material is of prime importance for several industrial processes. Here, a short overview of silica-based membrane materials and their hydrothermal stability is presented. Following this, the development of a series of organic–inorganic hybrid silica sols is described, based on α,ω-bis(triethoxysilyl)-precursors with bridging methane, ethane, propane, and benzene groups. High-throughput screening was used to scan a range of sol parameters, followed by membrane preparation from the most promising sols. These organic–inorganic hybrid silica (HybSi^®) membranes were used in dewatering of lower alcohols by pervaporation. Separation factors up to 200 were found for ethanol/water mixtures, and up to 23 for methanol/water mixtures. Modest permselectivity values for hydrogen over nitrogen were found, ranging up to 20.7 for the shortest bridging group. It was concluded that the length of the organic bridge has a clear effect on the pore size distribution and the selectivity of the membrane.