硫酸交联壳聚糖膜质子传导行为的研究

制备了硫酸交联壳聚糖膜, 通过研究其质子传导性能、力学性能、化学成分及结构变化, 分析了硫酸与壳聚糖分子间的交联方式, 并对质子传导机理进行了解析. 结果表明, 硫酸交联可显著改善壳聚糖膜的质子传导能力与力学性能, 这种改善作用在交联6 h后趋于稳定, 交联6 h后的壳聚糖湿膜在室温下时质子传导率为0.0472 S• cm^－1, 比未交联的壳聚糖膜提高5倍左右. 硫酸交联壳聚糖膜中的质子传导率与温度的关系符合Arrhenius定律, 质子传导激活能为18 kJ/mol, 其传导机制应属于Grotthus机制. 硫酸对提高壳聚糖膜的质子传导能力主要有两方面的作用: (1) H₂SO₄可使壳聚糖分子中NH₂质子化形成NH₃^＋. (2) 处于两个氨基之间的SO₄^2－在质子传递过程中起离子桥梁作用, 参与以水分子为载体的质子传导过程, 从而减小质子传导的阻力, 提高了质子传导率.     

Poly(vinyl alcohol) (PVA)/sulfonated polyhedral oligosilsesquioxane (sPOSS) hybrid membranes for direct methanol fuel cell applications

Organic/inorganic hybrid membranes based on poly(vinyl alcohol) (PVA) and sulfonated polyhedral oligosilsesquioxane (sPOSS), crosslinked by ethylenediaminetetraacetic dianhydride (EDTAD), were prepared as candidate materials for proton exchange membranes in direct methanel fuel cell (DMFC) applications. Fourier transform infrared (FT‐IR) spectroscopy and ion exchange capacity measurements for the prepared networks clearly revealed sPOSS incorporation. We found that proton conductivity increased and methanol permeability decreased with increasing sPOSS content in the hybrid membrane. In particular, our hybrid membranes demonstrated proton conductivities as high as 0.042 S/cm, which is comparable to that of Nafion?, while exhibiting two orders of magnitude lower methanol permeability as compared to Nafion?. We postulate that the polar sulfonic acid groups of the incorporated sPOSS cages assemble to provide ion conduction paths while the hydrophobic portions of the same sPOSS cages combine to form a barrier to methanol permeation with improved thermal stability of the hybrid membrane. Copyright © 2007 John Wiley & Sons, Ltd.     

含羧基交联型质子交换膜的制备及其性能

合成了一种含酯基的磺化聚合物,利用后水解的方法得到了含有羧基侧基的聚合物;将磺化聚合物与聚乙烯醇通过溶液共混,热处理后得到交联型的共混膜材料。 研究结果表明,膜材料的玻璃化转变温度(Tg)有明显的上升,证明了交联反应的发生;同时,膜的吸水率和溶胀率有一定的下降,力学性能和热稳定性也有一定的提升。 通过共价交联的方法,制备了综合性能优异的磺化聚芳醚质子交换膜材料。 在100 ℃,交联膜的质子传导率为0.072~0.065 S/cm,吸水率为51%~89%,溶胀率为19%~30%。     

Performance assessment of hybrid multiblock copolymers included with ionic liquid for fuel cell applications

To improve the proton conductivity and thermal stability of proton exchange membrane, hybrid poly (arylene ether) multiblock copolymers were synthesized by using 6F-bisphenol A monomer. The hydrophobic oligomers poly (arylene ether sulfone) containing 6F-bisphenol A with varying molecular weight were copolymerised with hydrophilic oligomer disulfonated poly (arylene ether ketone) containing pendant carboxylic acid group to prepare multiblock copolymers. For further enhancing the proton conductivity, ionic liquid is embedded into the synthesized multiblock copolymers to fabricate the hybrid multiblock membranes. The ¹H NMR studies confirmed the synthesis of oligomers and multiblock copolymers whereas the FT-IR spectra revealed the interaction of ionic liquid with the multiblock copolymers. The proton conductivity of the membranes has also been examined at different temperatures and the activation energy required for the proton transport was calculated by using Arrhenius equation. At 30 °C, the maximum proton conductivity of 0.14 S/cm were shown by hybrid membrane (with 50% ionic liquid, 6FB1/I.L-50%), which is of 3.5 times greater than that of pristine 6FB1 membrane. Compared with pristine membranes, the hybrid membranes exhibit improved oxidative, thermal and mechanical stability. Moreover, the scanning electron microscopy (SEM) investigation depicts better phase separation in hybrid membranes than pristine membranes by forming ionic clusters. The membranes have been tested in H₂/O₂ fuel cell and their performance is compared with the state-of-art Nafion 117 membrane.     

Branched/Crosslinked Sulfonated Polyimide Membranes for Polymer Electrolyte Fuel Cells

Summary: Branched/crosslinked sulfonated polyimide membranes incorporating superior mechanical properties, high proton conductivity, and excellent fuel cell performance were successfully developed. The resulting polymer electrolytes displayed conductivity values of about 0.2 S · cm⁻¹ at 120 °C and 100% relative humidity. In a single H₂/O₂ fuel cell system at 90 °C, they exhibited reasonably high fuel cell performances comparable to that of Nafion 112.

The structure of the branched/crosslinked sulfonated polyimide membranes studied here.     

Preparation and Conducting Behavior of Amphibious Organic/Inorganic Hybrid Proton Exchange Membranes Based on Benzyltetrazole

A series of novel amphibious organic/inorganic hybrid proton exchange membranes with H3PO4 doped which could be used under both wet and dry conditions was prepared through a sol-gel process based on ac...     

Chemically stable hybrid polymer electrolyte membranes prepared by radiation grafting,sulfonation, and silane‐crosslinking techniques

To prepare a crosslinked hybrid polymer electrolyte membrane (PEM) with high chemical stability, a silane monomer, namely p‐styryltrimethoxysilane (StSi), was first grafted to poly(ethylene‐co‐tetrafluoroethylene) (ETFE) film by γ‐ray preirradiation. Hydrolysis‐condensation and sulfonation were then performed on the StSi‐grafted ETFE (StSi‐g‐ETFE) films to give them crosslinks and proton conductibility, respectively. Thus, a crosslinked proton‐conducting hybrid PEM was obtained. The crosslinks introduced by the silane‐condensation have an inorganic ? Si? O? Si? structure, which enhance the chemical and thermal stabilities of the PEM. The effect of the timing of the hydrolysis‐condensation (before or after sulfonation) and the sulfonation method (by chlorosulfonic acid or H₂SO₄) on the properties of the resulting hybrid PEMs such as ion‐exchange capacity, proton conductivity, water uptake, chemical stability, and methanol permeability were investigated to confirm their applicability in fuel cells. We conclude that the properties of the new crosslinked hybrid StSi‐grafted PEMs are superior to divinylbenzene (DVB)‐crosslinked styrene‐grafted membranes. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5559–5567, 2008     

New proton conducting hybrid membranes for HT-PEMFC systems based on polysiloxanes and SO3H-functionalized mesoporous Si-MCM-41 particles

For increased efficiency of high-temperature polymer electrolyte membrane fuel cells (HT-PEMFC), new types of membranes have to be developed. This approach has been realized by preparing hybrid membranes containing SO₃H-functionalized mesoporous Si-MCM-41 as hydrophilic inorganic modifier in a polysiloxane matrix exhibiting sulfonic acid groups and basic heterocyclic groups like benzimidazole. The proton conductivity of sulfonated particles was modelled on the atomic scale in order to understand the influence of the density of sulfonic acid groups and of the presence of water molecules. The different hybrid membranes are characterized concerning their thermal stability, water uptake, and proton conductivity. Whereas the proton conductivity of well-established, but expensive and at >120 °C not long-time stable Nafion membranes continuously decreases with increasing temperature, the polysiloxane membranes, which suffer from a low-proton conductivity at around 100 °C, recover at about 120 °C due to intrinsic proton transport. At 180 °C the pure polysiloxane shows a proton conductivity which is only one order of magnitude lower than that of Nafion. Moreover, if the polysiloxane membrane contains additionally 10 wt.% of an SO₃H-modified Si-MCM-41, the proton conductivity of such hybrid membrane at temperatures >180 °C and low relative humidity <10% is higher than that of Nafion membranes by a factor of 10.     

无机质子导体SnP2O7及其复合膜

合成了无机质子导体SnP₂O₇,测定了其从室温到250 ℃不加湿条件下的电导率,170 ℃时,SnP₂O₇的电导率最高为0.053 S/cm。通过溶液浇铸法,分别制备了SnP₂O₇与聚偏氟乙烯 (PVDF) 及磺化聚醚醚酮 (SPEEK) 的复合膜。210 ℃时,SnP₂O₇质量分数为60%的SnP₂O₇/PVDF和SnP₂O₇/SPEEK复合膜的电导率分别为9.2×10^-5 S/cm及9.3×10^-5 S/cm。对SnP₂O₇及其复合膜的质子传导机理,进行了初步探讨。测定了复合膜的机械强度,130 ℃时SnP₂O₇/PVDF的断裂拉伸强度明显优于SnP₂O₇/SPEEK复合膜。     

Preparation and characterization of crosslinked PVA/SiO2 hybrid membranes containing sulfonic acid groups for direct methanol fuel cell applications

Organic–inorganic hybrids based on poly(vinyl alcohol) (PVA)/SiO₂ hybrid membranes containing sulfonic acid groups were prepared using the sol–gel process under acidic conditions. The PVA/sulfosuccinic acid (SSA)/silica hybrid membranes were fabricated from different SSA contents. The proton conductivity and methanol permeability of the hybrid membranes were studied with changing SSA content from 5 to 25 wt.%. It was found that the proton conductivity and the methanol permeability were dependent on the SSA content both as a crosslinking agent, and as a donor of the hydrophilic SO₃H group. Up to an SSA content of about 20 wt.%, both of these properties decrease, and above this SSA content, they begin to increase with increasing SSA content. The proton conductivities of the PVA/SSA/silica membranes were in the range of 10⁻³ to 10⁻² S/cm, and the methanol permeabilities ranged between 10⁻⁸ and 10⁻⁷ cm²/s. The presence of silica particles in the organic polymer matrix, which reduce the free water ratio of the membranes, results in hybrids with markedly reduced methanol permeabilities. These characteristics of the PVA/SSA/silica hybrid membranes are desirable for future applications related to direct methanol fuel cells.     

Synthesis,characterization, and proton‐conducting properties of organic–inorganic hybrid membranes based on polysiloxane zwitterionomer

The synthesis and characterization of a series of zwitterionic hybrid membranes based on a zwitterionic siloxane precursor (ZS) are described. Flexible, transparent, optically homogeneous films were prepared. With the further incorporation of poly(ethylene glycol) (PEG), the hybrid films became more flexible but translucent. The structure of the inorganic sides was probed with solid‐state ²⁹Si NMR spectroscopy, and the organic sides and the chemical process involved were characterized with solid‐state ¹³C cross‐polarization/magic‐angle spinning NMR. A higher content of ZS led to higher proton conductivity of the hybrid electrolytes. Moreover, the proton conductivity was enhanced by the addition of the plasticizing component of PEG to the hybrid matrix; this was ascribed to the increased water uptake and free volume of the hybrid matrix and the dissociation of sulfonic acid groups. The proton conductivity of these hybrid membranes could be increased up to 3.5 × 10^?2 S/cm by the temperature and relative humidity being increased to 85 °C and 95%, respectively. The proton‐conduction behavior of these hybrid membranes is also briefly discussed. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3444–3453, 2006     

Synthesis and Characterization of Novel Sulfonated Hybrid Congo Red Membranes from Chlorofunctionalized Silsesquioxanes for Fuel Cell Application

A new sulfonated copolymers containing congo red groups were synthesized as a potential electrolyte for high temperature PEFCs. The resulting cross-linked sulfonated hybrid congo red membranes showed greatly improved water stability in comparison with the uncrosslinked ones while high proton conductivity was maintained. sulfonated membranes have been tested with respect to fuel cell performance. Short term fuel cell test for 100 hr gave a stable performance. These membranes are less expensive compared to Nafion. New sulfonated proton exchange composites membranes were used biological fuel cells. Molasses which is the waste of sugar factory, was used in anode as fuel and different bacteria species was sowing. Potential change was reported in biological fuel cells.     

Optimal method for preparing sulfonated polyaryletherketones with high ion exchange capacity by acid-catalyzed crosslinking for proton exchange membrane fuel cells

Sulfonated polyaryletherketones (SPAEK) bearing four sulfonic acid groups on the phenyl side groups were synthesized. The benzophenone moiety of polymer backbone was further reduced to benzydrol group with sodium borohydride. The membranes were crosslinked by acid-catalyzed Friedel-Crafts reaction without sacrifice of sulfonic acid groups and ion exchange capacity (IEC) values. Crosslinked membranes with the same IEC value but different water uptake could be prepared. The optimal crosslinking condition was investigated to achieve lower water uptake, better chemical stability (Fenton's test), and higher proton conductivity. In addition, the hydrophilic ionic channels from originally course and disordered could be modified to be narrow and continuous by this crosslinking method. The crosslinked membranes, CS4PH-40-PEKOH (IEC = 2.4 meq./g), reduced water uptake from 200 to 88% and the weight loss was reduced from 11 to 5% during the Fenton test compared to uncrosslinked one (S4PH-40-PEK). The membrane showed comparable proton conductivity (0.01–0.19 S/cm) to Nafion 212 at 80°C from low to high relative humidity (RH). Single H₂/O₂ fuel cell based on the crosslinked SPAEK with catalyst loading of 0.25 mg/cm² (Pd/C) exhibited a peak power density of 220.3 mW/cm², which was close to that of Nafion 212 (214.0 mW/cm²) at 80°C under 53% RH. These membranes provide a good option as proton exchange membrane with high ion exchange capacity for fuel cells.     

离子型交联磺化聚酰亚胺质子交换膜的制备及高温燃料电池性能

以2,2′-双(4-磺基苯氧基)联苯二胺、 2-(4-氨基苯基)-5-氨基苯并咪唑和1,4,5,8-萘四甲酸二酐为单体, 通过逐步聚合和溶液成膜法制备了离子型交联磺化聚酰亚胺质子交换膜(SPI PEMs). SPI PEMs具有优异的机械性能和耐水解稳定性, 在高离子交换容量和高湿度下具有和NR212相当的质子传导性能. 电池工作温度为90 ℃时, 高加湿条件下, n(BSPOB)/n(DABI)为5/2的离子型交联SPI PEM(M1)的最大输出功率密度(W_max)为 0.93 W/cm², 高于NR212的0.86 W/cm². 当电池温度提高到110 ℃时, 所有PEMs的电池性能显著下降, M1的W_max为0.54 W/cm², 明显高于共价型交联的SPI PEM. 离子型交联的SPI PEM在110 ℃下300 h的开路电压(OCV)耐久性降低了约10%, 远高于NR212.     

钛酸钡掺杂磺化聚醚酮质子膜的制备与性能

将纳米钛酸钡(BT)在环己烷中超声分散制得均匀的悬浊液后,与磺化聚醚酮的二甲亚砜溶液均匀混合,然后采用流延法制备了掺杂质子交换膜。 通过环镜扫描电子显微镜表征发现BT在膜中分散均匀,通过吸水率、溶剂吸收率、尺寸变化、电导率、甲醇透过率、力学性能及稳定性等测试发现掺杂膜虽然电导率有所下降,但是其抗溶胀性、稳定性和力学性能显著提高。     

Promotion of PEM self-humidifying effect by nanometer-sized sulfated zirconia-supported Pt catalyst hybrid with sulfonated poly(ether ether ketone)

A self-humidifying membrane based on low-cost sulfonated poly (ether ether ketone) (SPEEK) hybrid with sulfated zirconia (SO4(2-)/ZrO2, SZ)-supported platinum catalyst (Pt-SZ catalyst) was investigated for fuel cell applications. The SZ particle, a solid-state superacid with hygroscopic and high proton conductivity properties, was employed as the catalyst support. The SPEEK/Pt-SZ self-humidifying membrane was characterized by TEM and SEM coupled with EDX. FT-IR was conducted to verify the effect of SPEEK/Pt-SZ membrane on catalytic combination of crossover hydrogen and oxygen. To display the advantages of Pt-SZ catalyst as the additive, the IEC, water uptake, proton conductivity, single-cell performance, and areal resistance measurements were compared between the plain SPEEK membrane, SPEEK/Pt-SiO2 membrane, and the SPEEK/Pt-SZ membrane. The SPEEK/Pt-SZ membrane exhibited the highest IEC value, proton conductivity, single-cell performance, and the lowest areal resistance relative to the plain SPEEK and SPEEK/Pt-SiO2 membranes. The SPEEK/Pt-SZ self-humidifying membrane exhibited peak power density of 1.0 W/cm2 under dry operation condition compared with 0.89 W/cm2 and 0.58 W/cm2 of SPEEK/Pt-SiO2 and plain SPEEK membranes, respectively. The incorporation of the catalytic, hygroscopic and proton conductive Pt-SZ catalyst in the SPEEK/Pt-SZ self-humidifying membrane facilitated water balance and proton conduction, and accordingly improved its single cell performance under dry operation. In addition, the enhanced OCV and the decreased areal ohmic resistance confirmed the promotion effect of Pt-SZ catalyst in the self-humidifying membrane on suppressing reactant crossover and the membrane self-humidification.     

硅氧烷交联的咪唑基团功能化聚苯醚/聚四氟乙烯耐高温质子交换膜

以聚苯醚(PPO)为基体材料, 通过溴甲基化及咪唑基团功能化, 与聚四氟乙烯(PTFE)复合、 硅氧烷基团水解交联及磷酸掺杂, 制备了兼具高磷酸掺杂含量、 高质子电导率和良好机械性能的高温质子交换膜材料. 以甲基咪唑(MeIm)和咪唑基硅氧烷化合物(SiIm)为功能化试剂(其中咪唑基团提供了磷酸作用位点, 同时SiIm中的硅氧烷基团水解后得到Si—O—Si交联网络结构), 提高了膜材料的机械稳定性. 与PTFE的复合进一步增强了膜材料的机械强度. 结果表明, 复合膜具有较高的电导率和一定的机械强度. 当磷酸掺杂质量分数为242.5%时, PPO-50%SiIm-50%MeIm/PTFE复合膜在160 ℃不加湿条件下的电导率为0.09 S/cm, 室温下的断裂拉伸强度为3.6 MPa.     

Phosphoric acid‐doped imidazolium ionomers with enhanced stability for anhydrous proton‐exchange membrane applications

Phosphoric acid‐doped crosslinked proton‐conducting membranes with high anhydrous proton conductivity, and good chemical stability in phosphoric acid were synthesized and characterized. The synthetic procedure of the acid‐doped composite membranes mainly involves the in situ crosslinking of polymerizable monomer oils (styrene and acrylonitrile) and vinylimidazole, and followed by the sulfonation of pendant imidazole groups with butanesultone, and further doped with phosphoric acid. The resultant phosphoric acid‐doped composite electrolyte membranes are flexible and show high thermal stability and high‐proton conductivity up to the order of 10^?2 S cm^?1 at 160 °C under anhydrous conditions. The phosphoric acid uptake, swelling degree, and proton conductivity of the composite membranes increase with the vinylimidazole content. The resultant composite membranes also show good oxidative stability in Fenton's reagent (at 70 °C), and quite good chemical stability in phosphoric acid (at 160 °C). The properties of the prepared electrolyte membranes indicate their promising prospects in anhydrous proton‐exchange membrane applications. © 2013 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013 , 51, 1311–1317     

Proton conducting membranes based on poly(vinyl chloride) graft copolymer electrolytes

The direct preparation of proton conducting poly(vinyl chloride) (PVC) graft copolymer electrolyte membranes using atom transfer radical polymerization (ATRP) is demonstrated. Here, direct initiation of the secondary chlorines of PVC facilitates grafting of a sulfonated monomer. A series of proton conducting graft copolymer electrolyte membranes, i.e. poly(vinyl chloride)‐g‐poly(styrene sulfonic acid) (PVC‐g‐PSSA) were prepared by ATRP using direct initiation of the secondary chlorines of PVC. The successful syntheses of graft copolymers were confirmed by ¹H‐NMR and FT‐IR spectroscopy. The images of transmission electron microscopy (TEM) presented the well‐defined microphase‐separated structure of the graft copolymer electrolyte membranes. All the properties of ion exchange capacity (IEC), water uptake, and proton conductivity for the membranes continuously increased with increasing PSSA contents. The characterization of the membranes by thermal gravimetric analysis (TGA) also demonstrated their high thermal stability up to 200°C. The membranes were further crosslinked using UV irradiation after converting chlorine atoms to azide groups, as revealed by FT‐IR spectroscopy. After crosslinking, water uptake significantly decreased from 207% to 84% and the tensile strength increased from 45.2 to 71.5 MPa with a marginal change of proton conductivity from 0.093 to 0.083 S cm^?1, which indicates that the crosslinked PVC‐g‐PSSA membranes are promising candidates for proton conducting materials for fuel cell applications. Copyright © 2008 John Wiley & Sons, Ltd.     

Hybrid Organic/Inorganic Sol-Gel Materials for Proton Conducting Membranes

One important application of hybrid organic-inorganic materials with nano-sized interfaces is the preparation of membranes for Proton Exchange Membrane Fuel Cells (PEMFC) operating at high temperature. Poly (styrene-co-methacrylate)--silica covalent hybrid membranes have been synthesised by copolymerization of monomers (styrene and 2-hydroxyethyl methacrylate), with formation of covalent bonds between hydroxyl group of HEMA and pre-hydrolysed tetraethoxysilane (TEOS). Sulfonation of benzyl groups was applied to endow the membranes of proton conductivity. The incorporation of an inorganic component to a polymeric one modifies properties like thermal, chemical and mechanical stability, and proton conductivity. A compromise between these properties has to be achieved to produce adequate proton conducting membranes with application in PEMFC. The hybrid membrane with 25% SiO₂ combines these properties being a promising candidate for application in PEMFC.