ZnO-Bi2O3二元陶瓷粉体电化学行为研究

采用电化学阻抗谱和电位-电容测试及Mott-Schottky分析技术研究了ZnO-Bi2O3粉体电极在0.5 mol/L NaCl溶液中的电化学行为. 研究表明, ZnO-Bi2O3粉体表现为n型半导体; 随着Bi2O3含量的增加或混合时间的延长, 粉体的阻抗增大, 空间电荷层电容Csc减小, 载流子浓度ND减小; 经高温烧结成二元压敏陶瓷, 随着混合时间的延长, 电阻片综合电性能越好. 该方法可有效评价二元陶瓷粉体混合均匀性.     

碳钢/醇酸涂层在5%NaCl溶液中的极化及半导体行为

摘要 采用电位-电容测试和Mott-Schottky分析技术研究了碳钢/醇酸涂层在5%NaCl溶液侵蚀下腐蚀失效过程中的极化及半导体行为. 浸泡2h, 电极形成了MIS结构, 涂层半导体为n型导电, 半导体载流子密度为4.99×109cm-3, 腐蚀仅受水和离子在涂层中的扩散控制;浸泡1d和2d时, 涂层在电场下发生偶极极化, 偶极电场阻碍载流子的迁移, 偶极弛豫效应使微分电容随外加电位绝对值增大而减小, 并造成电位-电容行为的频率依赖性;浸泡7d~17d涂层发生空间电荷极化, 碳钢与涂层形成了金属/半导体接触, 随着浸泡时间延长, 涂层载流子密度逐渐增加, 平带电位正移, 功函数逐渐减小, 对电子束缚能力减弱, 随外加电位的增加, 金属/醇酸涂层界面势垒升高, 空间电荷层成为阻挡层, 电极载流子输运受涂层孔隙电阻, 空间电荷层, 金属基底反应动力学三重控制.     

微机化紫外可见区现场光谱电化学联用测量系统的研制

本文报道了由微机控制的紫外可见区现场(in situ)光谱电化学联用测量系统的硬件和软件设计。该系统可以测量电化学调制反射光谱,光电流谱和光电容谱,并可实现同一实验体系的同时联合测量,这些功能均由计算机软件完成。该系统已应用于金属、半导体、半导电氧化膜电极/溶液界面行为的研究,得到了一些新的实验结果。     

N80油套管钢钝化膜的光电化学性能

采用电容测试法研究了N80油套管钢在浓度为0.5 mol/L NaHCO3溶液中形成钝化膜的半导体性能,结合Mott-Schottky方程分析了测试频率,成膜电位和C l-浓度对钝化膜半导体性能的影响。电容测试结果表明,钝化膜呈n型半导体特性,Mott-Schottky曲线的斜率随着测试频率的增加、成膜电位的正移和溶液中氯离子浓度的增加而增加,相应地膜内的施主密度减小。光电化学实验结果表明,光电流强度随成膜电位的正移及成膜时间的延长而增加,这主要归功于高电位和长时间下所成的钝化膜具有比较均匀的组成,光激发所成的空位或电子在膜内的迁移率的增加。     

硅在HF溶液中阳极溶解的研究

Uhlir及Turner早在50年代就已发现^[1,2],硅在HF溶液中阳极极化时,阳极电流大于某一特定值硅表面会发生电抛光反应,而低于这个值硅表面则会形成一层不同颜色的多孔硅层.1990年Canham发现多孔硅层在室温下有光致发光现象^[3],受到科学界的高度重视,在世界范围内掀起了研究多孔硅的热潮^[4].众多的研究表明,多孔硅的发光性能与其微孔的多少、大小和分布密切相关.但多孔硅要发展成为可实用的光电子材料,首先必须制备出微孔分布均匀,孔径及孔深可控的多孔硅材料.这就有必要弄清多孔硅的形成机理^[5],了解硅在HF溶液中的溶解过程及机理.为此,本文对不同掺杂浓度不同导电类型的(111)晶面单晶硅在HF溶液中的电流-电压(I-V)、电容-电压(C-V)特性进行了研究,并对这些特性进行了分析.     

双极性半导体钝化膜空间电荷电容分析

钝化膜的空间电荷电容的测量(Mott-Schottky(M-S)曲线)是研究其半导体性质的重要手段, 双极性半导体钝化膜在耗尽态电位区M-S曲线斜率往往会发生改变, 首先建立了半导体富集态、耗尽态以及反型态空间电荷电容的统一计算公式, 进而将双极性半导体钝化膜空间电荷电容等效为钝化膜/溶液界面处电容和内层钝化膜/外层钝化膜界面处的np结电容的串联, 模拟计算结果能够很好地解释M-S曲线斜率发生改变这一实验现象. 同时, 计算结果表明, 对于双极性半导体的M-S曲线, 利用其直线部分的斜率、直线与电位坐标轴的截距来确定钝化膜的载流子浓度以及平带电位会产生一定的误差.     

溶液电导率的绝对测量方法

概括论述了三种溶液电导率绝对测量方法：基于精确测量电导池几何参数的测量方法、基于电容测量的溶液电导率测量方法和基于Van Der Pauw方法的溶液电导率测量方法。前一种方法用于许多国家的溶液电导率基准测量，后两种方法可发展为溶液电导率测量的基；住方法。     

多通道非接触电导检测装置用于自由流电泳分离在线检测

现有自由流电泳(FFE)装置因不具备在线检测功能,其实用性仍然存在明显不足.针对这一问题,该工作发展了一种多通道电容耦合式非接触电导检测(MC-C4 D)装置并开发了自动测量软件.MC-C4 D装置采用了并行分时的非接触电导检测技术,即由多个同样的非接触电导检测模块并行排列,而单个电导检测模块又由多个非接触电导检测池组...     

提高电容性电化学储能装置能量容量的一些尝试

本文从作者所在的课题组在超级电容器和超级电容电池方向的研究内容为基础,在电极材料和装置层面综述了电容性电化学储能装置的发展. 导电聚合物和过渡金属氧化物分别与碳纳米管复合后的复合物能显著提高前两者作为电容性法拉第储能电极的电容性能. 活性炭和碳黑等一类碳材料则可作为非法拉第储能的电极材料. 通过对超级电容器正负极电容做相应的匹配调整可以提高超级电容器的最大充电电压,从而提高超级电容器的能量容量. 此外,为了与实际设备相匹配,超级电容可以以双极板的方式串联堆积,满足高电压的需求. 超级电容电池作为新一代的电容性电化学储能装置,分别由具有电容性和法拉第电荷储存原理的电极组成,具有高比功率和高比能量的特点,也是近年来的研究热点.     

单壁碳纳米管用做超级电容器的电极材料

摘要本文研究了采用电弧放电法大规模合成的单壁碳纳米管（SWNT）用作超级电容器电极材料的电化学性能。N₂吸脱附测试表明SWNT既有发达的微孔，又有发达的中孔，其比表面为435 m².g^-1。由于既有双电层电容，又有表面官能团产生的准电容，采用浓硝酸处理后的单壁碳纳米管在水相电解液中的比电容达到105 F/g。基于SWNT的超级电容器也有着良好的充放电可逆性和循环稳定性。     

System for measuring separate impedance characteristics with a three- or four-electrode potentiostat

A system for measuring impedance components has been elaborated. Its operating principle consists, as in the case of bridges, of compensating current and comparing the impedance of the studied system with the impedance of a standard set of capacitors and resistors. Measuring system with a three- and four-electrode potentiostat are described. The system with a three-electrode potentiostat can be used in the studies of double layer capacitance and of metal-electrolyte solution electrode kinetics. The system with a four-electrode potentiostat is suitable for measuring the impedance of interfaces separating immiscible electrolyte solutions or of membranes. It is an advantage of the proposed systems that they cannot “see” the impedance of current electrodes.     

Impedance Spectroscopic Measurements of Pure Gas Adsorption Equilibria on Zeolites

Physisorption equilibria of gases on inert porous solids like activated carbon or molecular sieves can be characterized by measuring the (frequency dependent) capacitance of a capacitor filled with a sample adsorbent. This quantity strongly depends not only on the physico-chemical structure of the empty adsorbent in vacuum, but also on the permanent or induced dipole moments of the molecules adsorbed and of the fluid phase. Consequently, it should be possible to determine the excess mass being adsorbed on the internal surface of a highly porous solid by measurements of the dielectric constant. The aim of this work is to show for various pure gases and adsorbents that the change of the capacitance of an adsorption system depends on the adsorbed mass. Therefore, this effect can be used to characterize porous solids and their adsorbates and, for example, to check the state or the quality of industrial adsorbents during a process on site if calibration measurements have been taken (Staudt et al., 1994, 1998).     

交流示波极谱法中i~f-E曲线的研究 8:"电极/溶液"界面动态双电层微分电容的快速测量

"电极/溶液"界面动在记双电层微分电容是电极过程动力学中一个重要的物理量,但其测量方法,多数仍停留在对逐一测定的数据点进行作图分析上.本文以i~f-E曲线上电流峰的理论公式为基础,提出了一个快速测量"电极/溶液"界面动态双层微分电容的新方法.     

Destabilizing role of the double layer for a dissolution–depassivation mechanism

A new dissolution–depassivation mechanism showing a non-trivial complex S-shaped polarization curve due to the Frumkin isotherm hypothesis has been studied. A potential domain exists for sufficiently low values of the Frumkin interaction parameter where a negative differential resistance is observed. For this mechanism, the electrode potential acts as an essential system variable due to the double layer capacitance. Harmonic and relaxation oscillations can be observed for the dissolution–depassivation mechanism under galvanostatic control (GC). Hopf bifurcation gives rise to oscillations under GC only for sufficiently high values of the double layer capacitance. Bifurcation diagrams are plotted.     

电容法研究卵磷脂/氨基酸/H2O胶束和囊泡体系

运用电容法研究卵磷脂/氨基酸/H2O胶束和囊泡体系结构与性质. 卵磷脂的临界胶束浓度和囊泡生成浓度可由体系电容-卵磷脂浓度关系曲线求得.随着卵磷脂浓度增加, 体系电容增加, 卵磷脂由胶束形成囊泡. 随着氨基酸浓度增加, 胶束、囊泡半径增大, 体系电容减小. 氨基酸能促进卵磷脂形成胶束和囊泡, 使得卵磷脂临界胶束浓度和囊泡生成浓度减小, 其影响的强弱顺序为组氨酸>色氨酸>>甘氨酸.     

Pulsed Galvanostatic Method for Studying Corrosion Processes: A Further Development

The pulsed galvanostatic method of studying corrosion processes is applied together with the pulsed galvanostatic method of measuring the electrode capacitance, which makes it possible to more rigorously determine the number of components of an equivalent circuit for the electrode. In order to recognize the processes characterized by small time constants, it is advisable to take one more measurement with a polarizing-current pulse whose magnitude is several times greater but the length is shorter. The time interval for calculating still next RC circuit must be selected so that the residual transient, obtained after subtracting the contribution made by this circuit, should have a horizontal portion in the time interval from RC to 3RC. Parameters of the assumed last RC circuit can be calculated in a roundabout way, from the electrode capacitance measured by a pulsed method. It is established that, with an anodic measuring pulse, an equivalent circuit for an Ni electrode in 1 N H₂SO₄ comprises two RC circuits; for a Cu electrode in 1 N NaCl, a Warburg circuit and two RC circuits; and for an Ni electrode in 1 N NaCl, a Warburg circuit and four RC circuits.     

比值导数波谱法用于极谱及伏安法多组分分析

叙述了比值导数波谱法在电化学波谱解析中应用的原理。首先以混合物的极谱波（或伏安波）除以干扰组分的标准波谱得到比值波谱，再以比值波谱对电位求导得到比值导数波谱，藉此可消除干扰组分的影响。采用该法可对二组分体系进行分析，如选择合适的零交点便可对三组分体系进行分析。利用本法对苋菜红－日落黄的伏安波及铜－镉－镍的极谱波进行了解析及定量分析，获较好的结果。     

电化学阴极沉积制备氧化镍/碳纳米管复合电极的准电容特性

A novel type of composite electrode based on multiwalled carbon nanotubes coated with nano nickel oxide particles has been used in supercapacitors. Nickel oxide cathodically deposited from Ni(NO3)2 solution with carbon nanotubes as the matrix exhibited large pseudocapacitance of 25F/g in 6 mol/L KOH. The morphology of composites was examined by scanning electron microscope (SEM). To characterize the CNTs/nickel oxide composite electrode, a charge discharge cycling test for measuring specific capacitance, cyclic voltammetry, and ac impedance test is executed. The nickel oxide composite exhibiting excellent pseudocapacitive behavior(i.e.high reversibility, high specific capacitance, and low self discharge rate) has been demonstrated to be a potential candidate for the application of electrochemical supercapacitors.     

Review: Dielectrophoresis in cell characterization

Many cellular functions are affected by and thus can be characterized by a cell's electrophysiology. This has also been found to correspond to other biophysical parameters such as cell morphology and mechanical properties. Dielectrophoresis (DEP) is an electrostatic technique which can be used to examine cellular biophysical parameters through the measuring of single or multiple cell response to electric field induced forces. This label-free method offers many advantages in characterizing a cell population over conventional electrophysiology methods such as patch clamping; however, it has yet to see mainstream pharmacological application. Challenges such as the transdisciplinary nature of the field bridging engineering and the biological sciences, throughput, specificity as well as standardization are being addressed in current literature. This review focuses on the developments of DEP-based cell electrophysiological characterization where determining cellular properties such as membrane conductance and capacitance, and cytoplasmic conductivity are the primary motivation. A brief theoretical review, techniques for obtaining these cell parameters, as well as the resulting cell parameters and their applications are included in this review. This review aims to further support the development of DEP-based cell characterization as an important part of the future of DEP and electrophysiology research.     

The adsorption structure of nonionic surfactant on the sessile mercury electrode in a thin liquid film

In relation to a colloid stability, the adsorption structure of the Stern layer on a sessile mercury electrode in a thin liquid film of nonionic surfactant was investigated by measuring the double layer capacitance. The Stern capacitance on the electrode in the film could be detected when the measuring frequency used was low, for the resistance of the film was not extremely high but of the order of several thousand ohm. It was found that the adsorption structure of nonionic surfactant in the thin liquid film shows a stratification different from that of bulk.