Nickel(II) and zinc(II) complexes of N-substituted di(2-picolyl)amine derivatives: Synthetic and structural studies

The interaction of di(2-picolyl)amine (1) and its secondary N-substituted derivatives, N-(4-pyridylmethyl)-di(2-picolyl)amine (2), N-(4-carboxymethyl-benzyl)-di(2-picolyl)amine (3), N-(4-carboxybenzyl)-di(2-picolyl)amine (4), N-(1-naphthylmethyl)-di(2-picolyl)amine (5), N-(9-anthracenylmethyl)-di(2-picolyl)amine (6), 1,4-bis[di(2-picolyl)aminomethyl]benzene (7), 1,3-bis[di(2-picolyl)aminomethyl]benzene (8) and 2,4,6-tris[di(2-picolyl)amino]triazine (9) with Ni(II) and/or Zn(II) nitrate has resulted in the isolation of [Ni(1)(NO₃)₂], [Ni(2)(NO₃)₂], [Ni(3)(NO₃)₂], [Ni(4)(NO₃)₂]·CH₃CN, [Ni(5)(NO₃)₂], [Ni(6)(NO₃)₂], [Ni₂(7)(NO₃)₄], [Ni₂(8)(NO₃)₄], [Ni₃(9)(NO₃)₆]·3H₂O, [Zn(3)(NO₃)₂]·0.5CH₃OH, [Zn(5)(NO₃)₂], [Zn(6)(NO₃)₂], [Zn(8)(NO₃)₂] and [Zn₂(9)(NO₃)₄]·0.5H₂O. X-ray structures of [Ni(4)(NO₃)₂]·CH₃CN, [Ni(6)(NO₃)₂] and [Zn(5)(NO₃)₂] have been obtained. Both nickel complexes exhibit related distorted octahedral coordination geometries in which 4 and 6 are tridentate and bound meridionally via their respective N₃-donor sets, with the remaining coordination positions in each complex occupied by a monodentate and a bidentate nitrato ligand. For [Ni(4)(NO₃)₂]·CH₃CN, intramolecular hydrogen bond interactions are present between the carboxylic OH group on one complex and the oxygen of a monodentate nitrate on an adjacent complex such that the complexes are linked in chains which are in turn crosslinked by intermolecular offset π-π stacking between pyridyl rings in adjacent chains. In the case of [Ni(6)(NO₃)₂], two weak CH?O hydrogen bonds are present between the axial methylene hydrogen atoms on one complex and the oxygen of a monodentate nitrate ligand on a second unit such that four hydrogen bonds link pairs of complexes; in addition, an extensive series of π-π stacking interactions link individual complex units throughout the crystal lattice. The X-ray structure of [Zn(5)(NO₃)₂] shows that the metal centre once again has a distorted six-coordinated geometry, with the N₃-donor set of N-(1-naphthylmethyl)-di(2-picolyl)amine (5) coordinating in a meridional fashion and the remaining coordination positions occupied by a monodentate and a bidentate nitrato ligand. The crystal lattice is stabilized by weak intermolecular interactions between oxygens on the bound nitrato ligands and aromatic CH hydrogens on adjacent complexes; intermolecular π-π stacking between aromatic rings is also present.     

TRI (2-PYRIDYL) PHOSPHINE,TRI(2-PYRIDYL) PHOSPHINE OXIDE,AND TRI (2-PYRIDYL) ARSINE METAL (II) PERCHLORATE COMPLEXES

Abstract

Metal(II) perchlorate complexes with the ligands tri(2-pyridyl)phosphine, tri(2-pyridyl)phosphine oxide, and tri(2-pyridyl)arsine have the composition [M(TPX)₂] (ClO₄)₂. Coordination occurs only through the nitrogens of the pyridines. In the case of Cu(II) and tri(2-pyridyl)phosphine oxide, two isomers were obtained. One isomer contains symmetrical tridentate tri(2-pyridyl)phosphine oxide ligands while the second isomer contains an unsymmetrical ligand. The unsymmetrical tri(2-pyridyl)phosphine oxide may be a bidentate ligand or a bridging tridentate. Weak axial interaction between a pyridyl group and a second Cu(II) ion is postulated in solution and may be present in the solid state.     

Synthesis and Crystal Structure of the Dicopper(II) Complex [Cu2{Ph2P(=O)(o‐C6H4)CO2}2(THF)2(H2O)2][BF4]2 by Oxidation of [Cu{Ph2P(o‐C6H4)C(=O)H}2(NCMe)][BF4] with Aqueous H2O2

Treatment of [Cu(pcho)₂(NCMe)][BF₄] 1 (pcho = 2‐(diphenylphosphino)benzaldehyde) with aqueous H₂O₂ in THF solvent affords [Cu₂(dpb)₂(THF)₂(H₂O)₂] [BF₄]₂ 2 (dpb = 2‐(diphenylphosphinoxide)‐benzoate) after crystallization from diethyl ether. This reaction involves oxidation of Cu(I) to Cu(II) ion, phosphine to phosphinoxide, and benzaldehyde to benzoate species. The crystal structure of 2 consists of two copper(II) atoms bridged by two carboxylate moieties of the dpb ligands. The coordination about each copper(II) atom is a distorted trigonal bipyramid.     

A Novel Synthesis of AlCl[(NPh)2P(O)H] and SiCl2[(NPh)2P(O)H]: Two New Phosph(V)azane Derivatives

Reactions of phosph(V)azane derivatives of bis(anilino)phosphine oxide (PhNH)₂P(O)H (1) with AlCl₃ and SiCl₄ produce two new phosph(V)azane complexes, AlCl[(NPh)₂P(O)H] (2) and SiCl₂[(NPh)₂P(O)H] (3). In these reactions, an HCl elimination occurs and M─N bonds (M = Si, Al) form directly between a bis(anilino)phosphine oxide ligand with aluminum and silicon halides. The reactions do not require any base to deprotonate the phosphazane ligand. The final products have been fully characterized by means of elemental analysis and IR, MS, and multinuclear NMR (¹H, ¹³C, ³¹P, ²⁷Al, and ²⁹Si) spectroscopy.     

Dinuclear oxomolybdenum(VI) acetylacetonates: Crystal and molecular structure of Mo2O5(acac)2L2 (L = D2O,DMF)

The behavior of MoO₂(acac)₂ (acac = acetylacetonate) towards representative amines, amides, sulfoxides and phosphine oxides in common solvents has been examined. Compounds of the composition Mo₂O₅(acac)₂L₂ [L = H₂O, D₂O, dimethylformamide (DMF), dimethylacetamide (DMA), dimethylbenzamide (DMBA), tetramethylurea (TMU), dimethylsulfoxide (DMSO), dibutylsulfoxide (Bu₂SO), p-tolylsulfoxide (p-Tol₂SO), tributylphosphine oxide (OPBu₃), triphenylphosphine oxide (OPPh₃), hexamethylphosphoramide (HMPA)], derived from partial hydrolysis of MoO₂(acac)₂ followed by condensation and coordination of L, can readily be isolated. The crystal and molecular structures of Mo₂O₅(acac)₂L₂ (L = D₂O, DMF) have been established by X-ray diffraction analysis.     

Some Tris[(triorganophosphine)gold(I)]-oxonium and -Organoimonium Tetrafluoroborates with Bulky Substituents

Tris{[tri(2-methylphenyl)phosphine]gold(I)}-, tris{[tri(2,4,6-trimethylphenyl)phosphine]gold(I)}- and tris{[tri(cyclohexyl)phosphine]gold(I)}-oxonium tetra-fluoroborate ( 1?3 ) have been prepared from the corresponding (phosphine)gold(I) chlorides, silver oxide, and sodium tetrafluoroborate in acetone. These oxonium salts are excellent aurating agents for primary amines. Thus in the reaction with 1, t -butylamine ^tBuNH₂ and aniline PhNH₂ are readily converted into the tri nuclear imino complexes {[(2-MeC₆H₄)₃P]Au}₃N^tBu⁺BF₄^? ( 4 ) and {[(2-MeC₆H₄)₃P]Au}₃NPh⁺BF ( 5 ) in high yields. With 3 , both aniline and 8-amino-quinoline also give the tri nuclear complexes, i.e. {[(c-C₆H₁₁)₃P]Au}₃ NPh⁺BF ( 6 ) and {[(c-C₆H₁₁)₃P]Au}₃N(C₉H₆N)⁺BF ( 7 ). Auration of aniline with the most sterically hindered reagent 2 yields only the bi nuclear complex {[2,4,6-Me₃C₆H₂)₃P] · Au}₂N(Ph)H⁺BF ( 8 ). The reagents 1?3 and the Products 4 – 8 have been characterized by analytical and NMR spectroscopic data, and the crystal structures of compounds 4 and 6 have been determined by single crystal x-ray diffraction. In the cations of 4 , a triangle of gold atoms with short Au — Au contacts [3.036(1), 3.107(1), and 3.214(1) Å] forms a steep pyramid with the nitrogen atom, in which the angles Au? N? Au are all much smaller than the tetrahedral standard of 109.7°: 94.8(4), 98.1(4), and 103.0(4)°. This triangular Au₃ unit is staggered relative to the three methyl groups of the ^tBu substituent at nitrogen. The results for 6 are similar [Au — Au: 3.037(1), 3.071(1), and 3.222(1) Å; Au? N? Au: 95.3(3), 96.5(3), and 103.6(3)°]. Variable temperature NMR studies of compounds 3 and 8 show hindered rotation of the mesityl groups about the P? C bonds of the ligands originating from the steric congestion within each tertiary phosphine.     

Photocatalytic properties of new cyclopentadienyl and indenyl rhodium(I) carbonyl complexes with water-soluble 1,3,5-triaza-7-phosphaadamantane (PTA) and tris(2-cyanoethyl)phosphine

Reactions of [(η⁵-R)Rh(CO)₂] (R = cp, ind) with water-soluble phosphines (L = 1,3,5-triaza-7-phosphaadamantane and tris(2-cyanoethyl)phosphine) give the new rhodium(I) complexes of the types [Rh(η⁵-cp)(CO)(PTA)] (1), [Rh(η⁵-cp)(CO)(P(CH₂CH₂CN)₃)] (2), [Rh(η⁵-ind)(CO)(PTA)] (3) and [Rh(η⁵-ind)(CO)(P(CH₂CH₂CN)₃)] (4) in isolated yields of 52-75%. All these compounds have been fully characterized by IR, ¹H, ³¹P{¹H} and ¹³C{¹H} NMR, FAB-MS spectroscopies and elemental analyses. Reactivity for the substitution of phosphine is greater for [(η⁵-ind)Rh(CO)(L)] comparing to [(η⁵-cp)Rh(CO)(L)] because of a flexibility of the indenyl ligand to undergo facile η⁵-η³ coordinative isomerizations. The obtained complexes are active catalyst precursors for the dehydrogenation of propan-2-ol, octane and cyclooctane under photoassisted conditions without any organic hydrogen transfer acceptors, giving TOFs of 26-56 using 3 as precatalyst.     

Synthesis and characterization of mononuclear copper(II) and cadmium(II) complexes with di-(2-picolyl)sulfur

The reaction of Cu(ClO₄)₂·6H₂O and Cd(ClO₄)₂ with di-(2-picolyl)sulfur (dps) leads to the formation of mononuclear complexes [Cu(dps)(H₂O)(ClO₄)](ClO₄) (1) and [Cd(dps)₂](ClO₄)₂ (2). The crystal structure of 1 exhibits a distorted square pyramidal geometry, coordinated by one sulfur and two nitrogen atoms from the dps ligand, one water molecule and one perchlorate oxygen atom. For 2, the environment around cadmium atom is in a distorted octahedron with four nitrogen and two sulfur atoms from the dps ligand. Cyclic voltammetric data show that complexes undergo two waves of a one-electron transfer corresponding to M(II)/M(III) and M(II)/M(I) processes. Spectral and electrochemical behaviors of the complexes are also discussed.     

X-ray crystal structures of novel platinum(II) and palladium(II) complexes of dialkyl phosphonated phosphines

Two diethyl phosphonated phosphine ligands of formula Ph₂P(CH₂)₃PO₃Et₂ (ligand L) and Ph₂P(4-C₆H₄PO₃Et₂) (ligand L′) were used to prepare different complexes of platinum(II) (1, cis-PtCl₂L₂; 2, trans-PtCl₂L₂·H₂O; 3A and 3B, cis- and trans-PtCl₂L′₂) and palladium(II) (4, [PdCl₂L]₂; 5, trans-PdCl₂L₂·H₂O; 6, trans-PdCl₂L′₂·CH₂Cl₂). The single-crystal X-ray structure analyses of complexes 1, 2, 4-6 indicate that complexation involved only the phosphine end, whereas the strong polarization of the PO bond was highlighted by the formation of hydrogen bonds with a water molecule in 2 and 5, and with a dichloromethane molecule in 6, with an exceptionally short CH?O hydrogen bond length (C?O separation 3.094(3) Å).     

Synthesis and characterization of new semifluorinated linear and hyperbranched poly(arylene ether phosphine oxide)s through B2 + A2 and AB2 approaches

A new phosphorus containing trifluoromethyl-activated bisfluoro B₂ monomer has been synthesized successfully by coupling reaction of 4-methoxyphenylphosphonic dichloride and the Grignard salt of 5-bromo-2-fluorobenzotrifluoride. This monomer was converted to linear poly(arylene ether phosphine oxide)s by nucleophilic displacement of the fluorine atom on the benzene ring with several diphenols. The B₂ monomer was further demethylated to form an AB₂ monomer which on self condensation yielded hyperbranched poly(arylene ether phosphine oxide) with identical phosphorous containing moiety. The products obtained exhibit weight-average molecular weights as high as 600,000 g mol⁻¹ in SEC. These linear and hyperbranched poly(arylene ether phosphine oxide)s showed thermal stability as high as 516 °C for 10% weight loss in TGA in nitrogen and showed glass transition temperatures up to 253 °C in DSC. All the polymers were soluble in a wide range of organic solvents, e.g., CHCl₃, THF, NMP and DMF, however, the hb sample showed a significant lower solution viscosity compared to linear samples of similar molar mass. Transparent thin films of linear poly(arylene ether phosphine oxide)s casted from dichloromethane exhibited tensile strengths up to 50 MPa, a modulus of elasticity up to 0.95 GPa and elongation at break up to 36% depending on their exact repeating unit structures. No free standing films could be prepared from the hb analogue due to the missing entanglements, but stable thin polymer films on silicon wafers with high hydrophobicity were formed which showed water contact angles as high as 91°.     

Hydrogenation of α,β-unsaturated substrates by tris(2-phridyl)amine (tpN) or tris(2-pyridyl)phosphine (tpP)/[Ir(COE)2Cl]2 catalyst systems

This work describes the homogeneous hydrogenation of different α,β-unsaturated substrates by using as catalyst systems the complex [Ir(COE)₂Cl]₂ stabilized by tris(2-pyridyl)amine (tpN) or tris(2-pyridyl)phosphine (tpP) formed in situ under the following reaction conditions: pH₂ = 34 atm; T=373 K; substrate/catalyst ratio = 100, [ligand]/[metal]: 2,1; toluene (50 mL); R.P.M.: 430; t = 6 h. The activities varies from low to moderate range, where both ligands proved to be catalyst systems able to hydrogenate C=C and C=O bonds.     

(Phosphine)gold(I) Complexes of Benzenedithioles. Crystal structures of 1,2-benzenedithiolato-bis[triphenyl-phosphinegold(I)] and bis(triethylphosphine)gold(I) bis(1,2-benzenedithiolato)gold(III)

The reaction of 1,2- and 1,3-benzenedithiol C₆H₄(SH)₂ with chloro(phosphine)gold(I) complexes R₃PAuCl (R = Et, Ph) in the presence of triethylamine in tetrahydrofuran gives stable gold(I) complexes 1,2-C₆H₄(SAuPR₃)₂ [R = Et ( 1 ) and Ph ( 2 )] or 1,3-C₆H₄(SAuPPh₃)₂ ( 3 ), respectively, in high yield. The compounds have been characterized by analytical and NMR spectroscopic data. From the reaction of 1,2-C₆H(SH)₂ with Et₃P? AuCl a by-product [(Et₃P)₂Au]⁺ [Au(1,2? C₆H₄S₂)₂]^? ( 4 ) has also been isolated in low yield. The crystal structures of compounds 2 and 4 have been determined by single crystal X-ray diffraction. The gold(I) atoms in complex 2 are two-coordinate with bond angles S? Au? P of 175.2(1) and 159.5(1)°, Au? S bond distances of 2.304(1) and 2.321(1) å, and a short Au…?Au contact of 3.145(1) Å. The gold(I) atom in the cation of complex 4 is also linearly two-coordinate with a P? Au? P angle of 170.1(1) Å and Au? P distances of 2.296(3) and 2.298(3) Å. The geometry of the anion in 4 shows a square-planar coordination of gold(III) by two chelating 1,2-benzenedithiolate ligands with Au? S distances between 2.299(3) and 2.312(3) Å (for two crystallographically independent, centrosymmetrical anions in the unit cell).     

Ambidentate coordination of the tripyridyl ligands 2,2′:6′,2″-terpyridyl,tris(2-pyridyl)-amine,tris(2-pyridyl)methane and tris(2-pyridyl)phosphine to carbonylrhenium centres: Structural and spectroscopic studies

The reactions of [Re(CO)₅Cl] with the ligands tpy (2,2′:6′,2″-terpyridine), py₃N {tris(2-pyridyl)-amine}, py₃CH {tris(2-pyridyl)methane}, and py₃P {tris(2-pyridyl)phosphine} in toluene solution realize compounds with the general formulation [Re(ligand)(CO)₃Cl] in which the tripyridyl ligands are bidentate. X-ray structural determinations of fac-[Re(typ)(CO)₃Cl].H₂O and fac-[Re(py₃N)(CO)₃Cl] confirm these assignments. [Re(tpy)(CO)₃Cl].H₂O (C₁₈H₁₃ClN₃O₄Re) is monoclinic, space group P2₁/n, with cell dimensions a = 7.432(2) Å, b = 17.016(4) Å, c = 14.466(2) Å, β = 93.51(2)°, and Z = 4; full-matrix least-squares refinement on 2435 reflections with I ? 2.5σ(I) converged to a final R = 0.028 and R_w = 0.029. [Re(py₃N)(CO)₃Cl] (C₁₈H₁₂ClN₄O₃Re) is triclinic, space group P1 with cell dimensions a = 13.761(2) Å, b = 14.636(6)Å, c = 11.110(2) Å, α = 110.70(2)°, β = 102.45(2)°, γ = 107.48(2)°, and Z = 4; full-matrix least-squares refinement on 3459 reflections with I ? 2.5σ(I) converged to a final R = 0.038 and R_w = 0.039. If the synthetic procedure is undertaken under irradiation by visible light, for the ligand py₃N a species [Re(py₃N)(CO)₂Cl] (characterized by infrared spectroscopy and conductance measurements) is also formed, in which the ligand py₃N is tridentate. No analogous tridentate species is formed with the ligands tpy or py₃P, although there is evidence that it also forms for py₃CH.     

Analytical Methods for Determining the Concentration Ratio in Mixtures of Trioctylphosphine Oxide and Di(2-Ethylhexyl)Phosphoric Acid

Abstract

Analytical methods are described for determining the concentration ratio of trioctylphosphine oxide (TOPO) and di(2-ethylhexyl)phosphoric acid (D₂ EHPA) in hydrocarbon solvents or in mixtures where the D₂ EHPA is the solvent. The Electron Spectroscopy for Chemical Analysis (ESCA) method was used to analyze the mixtures for the relative amounts of phosphine oxide-phosphorus to phosphoric acid-phosphorus as well as the variance with the mixture composition of the Ols/P2p signal intensity. The nmr signal strength of the protons of the oxymethylene group of the D₂ EHPA and the signal strength of the other protons of D₂ EHPA and TOPO were measured in solutions of varying concentrations of D₂ EHPA and TOPO. Mass spectral comparisons of the molecular ion strengths of TOPO and D₂ EHPA were also correlated with mixture composition.     

Complexes of lanthanide nitrates with 2-N-(6-picoIyl)-benzamide

New complexes of lanthanide nitrates with 2-N-(6-picolyl)-benzamide of the formulae Ln₂[6-pic-BA], [NO₃l₆ (Ln = Y and La-Yb) have been prepared and characterised by chemical analysis, infrared, molar conductance and electronic spectral data. Molar conductance data along with IR data point to the presence of co-ordinated nitrate groups. IR spectra prove the bidentate co-ordination of the ligand to the metal ion, through the oxygen of the secondary amide and the nitrogen of the heterocyclic ring. Electronic spectral studies in the visible region suggest an eight co-ordinate geometry around the metal ions.     

Tris(2-ethylhexyl)phosphine oxide as an effective solvent mediator for constructing a serotonin-selective membrane electrode

A series of solvent mediators containing a phosphoryl (PO) group, such as tris(2-ethylhexyl)phosphate, bis(2-ethylhexyl) 2-ethylhexylphosphonate, 2-ethylhexyl bis(2-ethylhexyl)phosphinate, and tris(2-ethylhexyl)phosphine oxide, were used to construct serotonin-selective membrane electrodes. We found that replacing the alkoxy groups attached to phosphorus atoms in PO groups with alkyl groups strengthened the response of the electrode to serotonin, suppressing remarkably interference from inorganic cations, such as Na⁺. Thus, an electrode combining tris(2-ethylhexyl)phosphine oxide with an ion-exchanger, sodium tetrakis[3,5-bis(2-methoxyhexafluoro-2-propyl)phenyl]borate, gave a detection limit of 9 × 10⁻⁶ M with a slope of 55.2 mV per concentration decade in physiological saline containing 150 mM NaCl and 10 mM NaH₂PO₄/Na₂HPO₄ (pH 7.4). This is the best detection limit of any serotonin-selective electrode developed to date. The selectivity of this electrode for serotonin was over 10³ times that for inorganic cations, such as Na⁺ and K⁺, and lipophilic quaternary ammonium ions, such as acetylcholine and (C₂H₅)₄N⁺. Using the electrode, we measured the amount of serotonin released from platelets and found that the results agreed well with those obtained by a conventional fluorimetric assay of serotonin.     

Synthesis,structure, spectroscopic,and DNA binding properties of Co(III) and Ni(II) complexes with ((E)-2-(amino((pyridin-2-ylmethylene)amino)methylene)maleonitrile)

Two new complexes, [Co(L)₂]Cl·(MeOH)₂ (1) and [Ni(L)₂]₄·EtOH (2) (L?=?(E)-2-(amino((pyridin-2-ylmethylene)amino)methylene)maleonitrile), were synthesized and characterized by X-ray crystallography, IR, UV, and fluorescence spectroscopy. According to X-ray crystallographic studies, each metal was six-coordinate with six nitrogens from two ligands. Both complexes form two-dimensional supramolecular networks via hydrogen bonding and π–π interactions. Ultraviolet and visible spectra showed that absorptions arise from π–π ^?, MLCT, and d–d electron transitions. Fluorescence spectroscopy revealed moderate intercalative binding of these two complexes with EB–DNA, with apparent binding constant (K _app) values of 9.14?×?10⁵ and 3.20?×?10^5?M^?1 for Co(III) and Ni(II) complexes, respectively. UV–visible absorption spectra showed that the absorption of DNA at 260?nm was quenched for 2 but quenched then improved for 1 with addition of complexes, tentatively attributed to the effect of the combined intercalative binding and electrostatic interaction for 1.     

Zur Kenntnis der Struktur von Sr3(BN2)2

On the Structure of Sr₃(BN₂)₂ The structure of Sr₃(BN₂)₂ was determined on single-crystal X-ray data collected with a four-circle diffractometer. Sr₃(BN₂)₂ crystallizes in the cubic space group Im3 m (no. 229) with a = 764.56(3) pm and Z = 3. The structure contains linear BN^3?₂ ions with a B? N bond length of 135.8(6) pm. The straight forward synthesis employing metal nitrides plus boron nitride yielded crystalline powders of M₃(BN₂)₂ (M = Ca, Sr) at 1100°C (5 days). Cubic indexing of guinier patterns gave a = 765.8(1) pm for M = Sr and a = 734.7(2) pm for M = Ca. The structure refinement on a single crystal of Sr₃(BN₂)₂ revealed that one strontium site (2a; 0, 0, 0) is occupied by only about 50%. It has been tried to fully occupy this site with an alkali metal (A) to obtain ASr₄(BN₂)₃ (Z = 2). Reactions with A = Na yielded crystalline powders. Cubic indexing of the guinier pattern analogous to that of Sr₃(BN₂)₂ gave a = 754.2(1) pm.     

Polysulfonylamine. LXIX. Neuartige Pniktogendisulfonylamide: Synthese von Bismutdimesylamiden und Kristallstrukturen des zwölfgliedrigen Cyclodimers [Ph2BiN(SO2Me)2]2 und des ionischen Komplexes [H(OAsPh3)2]⊕(MeSO2)2N⊖

Polysulfonyl Amines. LXIX. Novel Pnictogen Disulfonylamides: Synthesis of Bismuth Dimesylamides and Crystal Structures of the Twelve-Membered Cyclodimer [Ph₂BiN(SO₂Me)₂]₂ and of the Ionic Complex [H(OAsPh₃)₂]^⊕(MeSO₂)₂N^? The novel bismuth(III or V) disulfonylamides Ph₂BiN(SO₂Me)₂ ( 1 ), PhBi[N(SO₂Me)₂]₂ ( 2 ), PhBi[N(SO₂Me)₂]Br ( 3 ), Bi[N(SO₂Me)₂]₂Cl ( 4 ), Bi[N(SO₂Me)₂]Cl₂ · 12-crown-4 ( 5 ) and Ph₃Bi[N(SO₂Me)₂]Cl ( 6 ) were obtained by acidolysis of Ph₃Bi with HN(SO₂Me)₂ (→ 1 ), by metathesis of AgN(SO₂Me)₂ with Ph₂BiCl (→ 1 ) or PhBiBr₂ (→ 2, 3 ), by condensation of BiCl₃ with Me₃SiN(SO₂Me)₂ (→ 4 ; in presence of 12-crown-4: → 5 ), or by oxidative addition of ClN(SO₂Me)₂ to Ph₃Bi (→ 6 ). Independently of the molar ratio employed, triphenylarsane oxide and dimesylamine form the crystalline 2/1 complex [H(OAsPh₃)₂]^⊕(MeSO₂)₂N^? ( 7 ). The crystal packing of 7 (monoclinic, space group C2/c) consists of discrete cations displaying crystallographic C_i symmetry and a strong O …? H …? O hydrogen bond (H atom located on a centre of symmetry, O …? O′ 241.2 pm, As? O …? O′ 120°, As? O 168.3 pm), and chiral anions with crystallographic C₂ symmetry (N? S 157.3 pm, S? N? S 122,9°). In the solid state, the bismuth(III) compound 1 (triclinic, space group P1 ) is a cyclodimer with crystallographic C_i symmetry, in which two Ph₂Bi^⊕ cations are connected through two (α-O, ω-O)-donating dimesylamide ligands to form a roughly twelve-membered [BiOSNSO]₂ ring (Bi? O 239.7 and 246.6, O? S 148.0 and 145.4, S? N 157.7 and 159.2 pm, Bi? O? S 126.6 and 127.5°). The bismuth atom adopts a pseudo-trigonal-bipyramidal geometry (O? Bi? O 165.4, C? Bi? C 93.0, O? Bi? C 83.8 to 86.5°). The essentially similar conformations of the discrete anion in 7 and of the bidentate bridging ligand in 1 are discussed in detail.     

α-Funktionelle 2-Methylphenylphosphane, 2-(HE?CH2)?C6H4?PH2 (E = O,NR, PH). II. Komplexbildungsverhalten mit den Metallcarbonylen des Cr,Mo, W

α-Functionalized 2-Methyl Phenylphosphines, 2-(HE? CH₂)? C₆H₄? PH₂ (E = O, NR, PH) II. Coordination Behaviour with Metal Carbonyles of Cr, Mo, W The preparation of different carbonyl substituted coordination compounds (M: Cr, Mo, W) of the phosphines 2-(HE? CH₂)C₆H₄? PH₂ (E = O, NPh, PH) is described. In one case, after deprotonation of a PH₂ group a phosphine/phosphide migration of a W(CO)₅ fragment is detected.