Heterostructured Tin oxide-pillared tetratitanate with enhanced photocatalytic activity

Here we point out that the nanocrystals well ordered in compact hexagonal networks are highly stable compared to the same nanocrystals either isolated on a substrate or ordered in a less compact manner. The emergence of unexpected collective physical intrinsic properties results in the nanocrystals being ordered over a long distance in colloidal crystals called supracrystals. Some morphologies of nanocrystals ordered, at the micrometer scale, in 3D superlattices called supracrystals are similar to those obtained with atoms in nanocrystals. From a comparison between vibrational and magnetic properties of supracrystals and aggregates composed of the same nanocrystals, it is proposed that nanocrystals in a supracrystal could behave as atoms in a nanocrystal. From these data a possible analogy between nanocrystals in a supracrystal and atoms in nanocrystals is proposed.     

Solventless nanoparticles synthesis under low pressure

In the present study, metal nanocrystals were obtained by the very easy, economical, and nontoxic thermal decomposition method and stabilized by coating oleate without any solvent. These nanocrystals have a highly crystalline structure due to a high decomposition temperature (~563-573 K) at low pressure and very narrow distribution. The prepared Fe3O4 nanocrystals were controlled by the annealing time and vacuum pressure. A TEM image of monodispersed Fe3O4 nanocrystals showed the 2D assembly of nanocrystals, demonstrating their uniformity. The particle size is 10.6 +/- 1.2 nm. TEM images of silver nanocrystals a showed 2D assembly with 9.5 +/- 0.7 nm. An electron diffraction image and X-ray diffraction of the nanocrystals showed the highly crystalline nature of metal nanocrystals.     

纳晶的制备及其光谱的尺寸依赖性

用再沉淀法制备了纳米晶体,向体系中加入水溶性高分子聚乙烯醇（PVA）可有效地抑制纳晶的生长,从而制得了稳定的具有不同粒径的纳晶.光谱研究表明,随着纳晶粒径增加,由于纳晶中分子间相互作用的变化,其吸收峰和激发峰位置都发生了红移,同时纳晶中激基缔合物的荧光发射峰强度减弱,荧光寿命有所延长.     

单源前体合成水溶性的CdS和ZnS纳米晶

0引言量子点(QuantumDots)一般指半径小于或接近玻尔激子半径的半导体纳米晶颗粒。和有机染料分子相比,无机半导体纳米晶的带隙宽度可通过简单     

Passivation of GaAs nanocrystals by chemical functionalization

The effective use of nanocrystalline semiconductors requires control of the chemical and electrical properties of their surfaces. We describe herein a chemical functionalization procedure to passivate surface states on GaAs nanocrystals. Cl-terminated GaAs nanocrystals have been produced by anisotropic etching of oxide-covered GaAs nanocrystals with 6 M HCl(aq). The Cl-terminated GaAs nanocrystals were then functionalized by reaction with hydrazine or sodium hydrosulfide. X-ray photoelectron spectroscopic measurements revealed that the surfaces of the Cl-, hydrazine-, and sulfide-treated nanocrystals were As-rich, due to significant amounts of As0. However, no As0 was observed in the photoelectron spectra after the hydrazine-terminated nanocrystals were annealed at 350 degrees C under vacuum. After the anneal, the N 1s peak of hydrazine-exposed GaAs nanocrystals shifted to 3.2 eV lower binding energy. This shift was accompanied by the appearance of a Ga 3d peak shifted 1.4 eV from the bulk value, consistent with the hypothesis that a gallium oxynitride capping layer had been formed on the nanocrystals during the annealing process. The band gap photoluminescence (PL) was weak from the Cl- and hydrazine- or sulfide-terminated nanocrystals, but the annealed nanocrystals displayed strongly enhanced band-edge PL, indicating that the surface states of GaAs nanocrystals were effectively passivated by this two-step, wet chemical treatment.     

Highly luminescent, stable, and water-soluble CdSe/CdS core-shell dendron nanocrystals with carboxylate anchoring groups

A dendron ligand with two carboxylate anchoring groups at its focal point and eight hydroxyl groups as its terminal groups was found to efficiently convert as-synthesized CdSe/CdS core-shell nanocrystals in toluene to water-soluble dendron-ligand stabilized nanocrystals (dendron nanocrystals). The resulting dendron nanocrystals retained 60% of the photoluminescence value of the original CdSe/CdS core-shell nanocrystals in toluene and were significantly brighter than the similar dendron nanocrystals with thiolate (deprotonated thiol group) as the anchoring group which retained just 10% of the photoluminescence value of the original CdSe/CdS core-shell nanocrystals in toluene. The carboxylate-based dendron nanocrystals survived UV irradiation in air for at least 13 days, about 9 times better than the thiolate-based dendron nanocrystals (35 h) and similar to that of the thiolate-based dendron-box stabilized CdSe/CdS core-shell nanocrystals (box nanocrystals). Upon UV irradiation, the dendron nanocrystals became even 2 times brighter than the original CdSe/CdS core-shell nanocrystals in toluene, and the UV-brightened PL can retain the brightness for at least several months. These stable and bright dendron nanocrystals were soluble in various aqueous media, including all common biological buffer solutions tested, for at least 1.5 years. In addition to their superior performance, the synthetic chemistry of carboxylate dendron ligands and the corresponding dendron nanocrystals is relatively simple and with high yield.     

Electron transfer between colloidal ZnO nanocrystals

Colloidal ZnO nanocrystals capped with dodecylamine and dissolved in toluene can be charged photochemically to give stable solutions in which electrons are present in the conduction bands of the nanocrystals. These conduction-band electrons are readily monitored by EPR spectroscopy, with g* values that correlate with the nanocrystal sizes. Mixing a solution of charged small nanocrystals (e(-)(CB):ZnO-S) with a solution of uncharged large nanocrystals (ZnO-L) caused changes in the EPR spectrum indicative of quantitative electron transfer from small to large nanocrystals. EPR spectra of the reverse reaction, e(-)(CB):ZnO-L + ZnO-S, showed that electrons do not transfer from large to small nanocrystals. Stopped-flow kinetics studies monitoring the change in the UV band-edge absorption showed that reactions of 50 μM nanocrystals were complete within the 5 ms mixing time of the instrument. Similar results were obtained for the reaction of charged nanocrystals with methyl viologen (MV(2+)). These and related results indicate that the electron-transfer reactions of these colloidal nanocrystals are quantitative and very rapid, despite the presence of ~1.5 nm long dodecylamine capping ligands. These soluble ZnO nanocrystals are thus well-defined redox reagents suitable for studies of electron transfer involving semiconductor nanostructures.     

Generalized and facile synthesis of semiconducting metal sulfide nanocrystals

We report on the synthesis of semiconductor nanocrystals of PbS, ZnS, CdS, and MnS through a facile and inexpensive synthetic process. Metal-oleylamine complexes, which were obtained from the reaction of metal chloride and oleylamine, were mixed with sulfur. The reaction mixture was heated under appropriate experimental conditions to produce metal sulfide nanocrystals. Uniform cube-shaped PbS nanocrystals with particle sizes of 6, 8, 9, and 13 nm were synthesized. The particle size was controlled by changing the relative amount of PbCl(2) and sulfur. Uniform 11 nm sized spherical ZnS nanocrystals were synthesized from the reaction of zinc chloride and sulfur, followed by one cycle of size-selective precipitation. CdS nanocrystals that consist of rods, bipods, and tripods were synthesized from a reaction mixture containing a 1:6 molar ratio of cadmium to sulfur. Spherical CdS nanocrystals (5.1 nm sized) were obtained from a reaction mixture with a cadmium to sulfur molar ratio of 2:1. MnS nanocrystals with various sizes and shapes were synthesized from the reaction of MnCl(2) and sulfur in oleylamine. Rod-shaped MnS nanocrystals with an average size of 20 nm (thickness) x 37 nm (length) were synthesized from a 1:1 molar ratio of MnCl(2) and sulfur at 240 degrees C. Novel bullet-shaped MnS nanocrystals with an average size of 17 nm (thickness) x 44 nm (length) were synthesized from the reaction of 4 mmol of MnCl(2) and 2 mmol of sulfur at 280 degrees C for 2 h. Shorter bullet-shaped MnS nanocrystals were synthesized from a 3:1 molar ratio of MnCl(2) and sulfur. Hexagon-shaped MnS nanocrystals were also obtained. All of the synthesized nanocrystals were highly crystalline.     

Controllable synthesis of Cu2S nanocrystals and their assembly into a superlattice

Highly uniform Cu2S nanocrystals with controllable sizes and shapes (circular and elongated) have been synthesized through a novel water-oil interface confined reaction. They can self-assemble into highly ordered multilayer superlattices. By controlling the size and shape of building block nanocrystals, the packing symmetry of the superlattice can be engineered. For circular nanocrystals, both fcc and hcp multilayer superlattices are found in the sample. For elongated nanocrystals, they can also generate a close-packed layer and further stack into a multilayer superlattice. The dipole moment of the inner nanocrystals is useful for their stacking. This work provides a simple bottom-up approach to integrate nanocrystals, as well as to adjust the packing symmetry of the final superlattice, which may have potential applications for nanomaterials and nanodevices in the future.     

Template-assisted synthesis of shape-controlled Rh2P nanocrystals

When reacted with trioctylphosphine at approximately 360 degrees C, rhodium nanocrystals convert to rhodium phosphide Rh(2)P nanocrystals. Careful control over synthetic variables, such as temperature, stabilizing ligands, and cosolvents, can result in Rh(2)P nanocrystals with shapes that reflect the Rh nanocrystal templates. Accordingly, Rh nanocrystals with multipod, cube- and triangle-derived shapes convert to Rh(2)P nanocrystals that maintain the shape of their Rh precursors. Both dense and hollow Rh(2)P nanocrystals can be generated using a single unified chemical conversion strategy. These empirical guidelines for generating a morphologically diverse library of Rh(2)P nanocrystals provide important insights into shape conservation using nanocrystal templates and will likely be portable to other multielement systems for which rigorous shape-controlled synthesis remains challenging.     

Stabilization of inorganic nanocrystals by organic dendrons

A series of hydrophilic organic dendron ligands was designed and synthesized for stabilizing high-quality semiconductor and noble metal nanocrystals. The focal point of the dendron ligands is chosen to be a thiol group which is a universal coordinating site for compound semiconductor and noble metal nanocrystals. The methods for binding these dendron ligands onto the surface of the nanocrystals are simple and straightforward. The thin, about 1-2 nm, but closely packed and tangled ligand shell provides sufficient stability for the "dendron-protected nanocrystals" to withstand the rigors of the coupling chemistry and the standard separation/purification techniques. The chemistry presented can be immediately applied for the development of a new generation of biomedical labeling reagents based on high-quality semiconductor nanocrystals. It also provides an alternative path to apply noble metal nanocrystals for developing sensitive detection schemes for chemical and biochemical purposes. The concept may further provide an optimal solution for many other problems encountered in nanocrystal-related research and development, for which the stability of the nanocrystals is a critical issue. Furthermore, the experimental results confirmed that the photochemical stability of colloidal semiconductor and noble metal nanocrystals is the key for developing reliable and reproducible processing chemistry for these nanocrystals.     

Radial-position-controlled doping in CdS/ZnS core/shell nanocrystals

In this paper, we report a new doping approach using a three-step synthesis to make high-quality Mn-doped CdS/ZnS core/shell nanocrystals. This approach allows precise control of the Mn radial position and doping level in the core/shell nanocrystals. On the basis of this synthetic advance, we have demonstrated the first example in which optical properties of Mn-doped nanocrystals strongly depend on Mn radial positions inside the nanocrystals. In addition, we have synthesized nanocrystals with a room-temperature Mn-emission quantum yield of 56%, which is nearly twice as high as that of the best Mn-doped nanocrystals reported previously. Nanocrystals with such a high-emission quantum yield are very important to applications such as nanocrystal-based biomedical diagnosis.     

Large-scale cubic InN nanocrystals by a combined solution- and vapor-phase method under silica confinement

Large-scale cubic InN nanocrystals were synthesized by a combined solution- and vapor-phase method under silica confinement. Nearly monodisperse cubic InN nanocrystals with uniform spherical shape were dispersed stably in various organic solvents after removal of the silica shells. The average size of InN nanocrystals is 5.7 ± 0.6 nm. Powder X-ray diffraction results indicate that the InN nanocrystals are of high crystallinity with a cubic phase. X-ray photoelectron spectroscopy and energy-dispersive spectroscopy confirm that the nanocrystals are composed of In and N elements. The InN nanocrystals exhibit infrared photoluminescence at room temperature, with a peak energy of ~0.62 eV, which is smaller than that of high-quality wurtzite InN (~0.65-0.7 eV) and is in agreement with theoretical calculations. The small emission peak energy of InN nanocrystals, as compared to other low-cost solution or vapor methods, reveals the superior crystalline quality of our samples, with low or negligible defect density. This work will significantly promote InN-based applications in IR optoelectronic device and biology.     

One-step facile surface engineering of hydrophobic nanocrystals with designer molecular recognition

High quality nanocrystals have demonstrated substantial potential for biomedical applications. However, being generally hydrophobic, their use has been greatly limited by complicated and inefficient surface engineering that often fails to yield biocompatible nanocrystals with minimal aggregation in biological fluids and active targeting toward specific biomolecules. Using chimeric DNA molecules, we developed a one-step facile surface engineering method for hydrophobic nanocrystals. The procedure is simple and versatile, generating individual nanocrystals with multiple ligands. In addition, the resulting nanocrystals can actively and specifically target various molecular addresses, varying from nucleic acids to cancer cells. Together, the strategy developed here holds great promise in generating critical technologies needed for biomedical applications of nanocrystals.     

Oleic acid assisted glycothermal synthesis of cuboidal Ba(0.6)Sr(0.4)TiO3 nanocrystals and their ordered architectures via self-assembly

The size-controllable and highly monodispersed cuboidal barium strontium titanate (BST) nanocrystals have been successfully synthesized through a glycothermal process with no mineralizers but oleic acid as growth-directing agent. The synthesized BST nanocrystals under different glycothermal conditions were structurally characterized by XRD, IR, FESEM, TEM and HRTEM and investigated with respect to the effects of key influencing factors including the amount of oleic acid, duration of glycothermal process and 1,4-butanediol/water volume ratio in the reaction media on the formation of BST nanocrystals and their size and morphological evolution. It has been found that the oleic acid incorporated into the glycothermal system plays a decisive role in promoting the formation of cuboidal nanocrystals. It allows the BST nanocrystals to form via a nucleation-growth mechanism instead of in situ reactions and the selective chemical adsorption of oleic acid molecules on the facets with lower plane indices of newly-built BST nuclei directs them to grow into uniform cuboidal BST nanocrystals. The duration of glycothermal reactions and the polarity of reaction media can remarkably affect the dynamic process of the formation of BST nanocrystals. These regularly-shaped and highly monodispersed nanocrystals show a spontaneity of self-assembling into 2D ordered architectures when they were dispersed in organic solvents like cyclohexane and droped onto a hydrophobic surface of substrates, which creates a chance for the ferroelectric oxide nanocrystals to self-assemble into nanoscale electronic devices.     

Tuning of the structure and emission spectra of upconversion nanocrystals by alkali ion doping

Recently, lanthanide based nanocrystals with upconversion fluorescence emission have attracted a lot of interest and the nanocrystals have been used for bioimaging, biodetection, and therapeutic applications. Use of the nanocrystals for multiplexed detection has also been explored; however, nanocrystals with multicolor emission are required. Some efforts have been made to tune the emission spectra of the nanocrystals based on manipulation of upconverting lanthanide ions doped in the crystals or creation of core/shell structures. In this work, alkali ions with an ionic radius slightly larger or smaller than Na such as Li and K were doped into NaYF(4):Yb,Er nanocrystals and their effect on the crystal structure and subsequently the upconversion emission spectra were studied. It was found that the phase transition occurs in the nanocrystals when a different amount of Li and K was doped. Furthermore, the intensity ratios between the blue, green, and red emission peaks changed accordingly, and make it possible to tune the upconversion fluorescence of the nanocrystals by Li and K doping.     

AC electric field‐assisted assembly and alignment of cellulose nanocrystals

In this article, we describe an efficient physical electric‐field‐assisted method to study self‐assembly and orientation of cellulose nanocrystals. When applying an alternating voltage to a cellulose nanocrystals suspension deposited onto a thin gap of coplanar lithographically patterned metallic electrodes, a highly homogeneous orientation of cellulose nanocrystals is obtained. Parameters such as strength and frequency of the applied electric field and cellulose nanocrystals aspect ratios were studied to determine how they affect cellulose nanocrystals assembly and orientation. The prepared films were analyzed by atomic force microscopy, and the results suggest that the alignment of cellulose nanocrystals generated films is greatly influenced by the frequency and the strength of the applied electric field. The orientation of cellulose nanocrystals becomes more homogeneous with increasing electric field higher than 2000 V/cm with a frequency ranging between 10⁴ and 10⁶ Hz. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1430–1436, 2008     

Facile synthesis of size-tunable ZIF-8 nanocrystals using reverse micelles as nanoreactors

This paper describes a robust method for the synthesis of high-quality ZIF-8 nanocrystals using reverse micelles as discrete nanoscale reactors.The precise size control of ZIF-8 nanocrystals is conveniently achieved by tuning the concentration of precursors,reaction temperatures,the amount of water,and the structure of surfactants.The as-synthesized ZIF-8 nanocrystals are of narrow distribution and tunable size.A size-dependent catalytic activity for Knoevenagel condensation reaction is further demonstrated by using ZIF-8 nanocrystals with different sizes as the catalysts.This facile method opens up a new opportunity in the synthesis of various ZIFs nanocrystals.     

Shape control and associated magnetic properties of spinel cobalt ferrite nanocrystals

By combining nonhydrolytic reaction with seed-mediated growth, high-quality and monodisperse spinel cobalt ferrite, CoFe(2)O(4), nanocrystals can be synthesized with a highly controllable shape of nearly spherical or almost perfectly cubic. The shape of the nanocrystals can also be reversibly interchanged between spherical and cubic morphology through controlling nanocrystal growth rate. Furthermore, the magnetic studies show that the blocking temperature, saturation, and remanent magnetization of nanocrystals are solely determined by the size regardless the spherical or cubic shape. However, the shape of the nanocrystals is a dominating factor for the coercivity of nanocrystals due to the effect of surface anisotropy. Such magnetic nanocrystals with distinct shapes possess tremendous potentials in fundamental understanding of magnetism and in technological applications of magnetic nanocrystals for high-density information storage.     

溶剂热法合成锐钛矿型二氧化钛纳米晶的形状演化规律

以钛酸四丁酯为前驱体,乙醇为溶剂,月桂酸和十二胺为共同稳定剂,采用溶剂热法制备了不同形状的锐钛矿型二氧化钛纳米晶。利用透射电子显微镜(TEM)、选区电子衍射(SAED)、X射线衍射(XRD)、傅里叶变换红外(FTIR)光谱和热失重-差热分析(TG-DTA)等技术对纳米晶的结构、尺寸、形貌及形状进行了系统的表征,并探讨了月桂酸与十二胺不同配比时纳米晶的形状演化规律。结果表明:用溶剂热法在不同配比情况下获得的二氧化钛均为锐钛矿相;在月桂酸与十二胺总摩尔量不变的情况下,随着十二胺含量的增加,二氧化钛纳米晶的形状由球形逐渐演化为棒状,且结晶化程度在两者摩尔比为1:1时最好;月桂酸与十二胺稳定剂与纳米晶内核之间以桥接配位体的形式结合,且稳定剂在样品中的含量约为5%。