It still remains a big challenge to fabricate binary colloidal crystals (binary CCs) from hard colloidal spheres, although a lot of efforts have been made. Here, for the first time, binary CCs are assembled from soft hydrogel spheres, PNIPAM microgels, instead of hard spheres. Different from hard spheres, microgel binary CCs can be facilely fabricated by simply heating binary microgel dispersions to 37 °C and then allowing them to cool back to room temperature. The formation of highly ordered structure is indicated by the appearance of an iridescent color and a sharp Bragg diffraction peak. Compared with hard sphere binary CCs, the assembly of PNIPAM microgel binary CCs is much simpler, faster and with a higher “atom” economy. The easy formation of PNIPAM microgel binary CC is attributed to the thermosensitivity and soft nature of the PNIPAM microgel spheres. In addition, PNIPAM microgel binary CCs can respond to temperature change, and their stop band can be tuned by changing the concentration of the dispersion.
A strategy was developed for the synthesis of highly ordered 2D arrays of Ag-PNIPAM hybrid microgel.The highly ordered 2D arrays of PNIPAM microgel were prepared by dispersing PNIPAM microgel on a charge-reversible substrate.The microgel spheres self-assembled into a 3D colloidal crystal,and the first 111 plane was fixed in situ onto the substrate as a result of spontaneous charge reversal of the substrate,leaving a high-quality 2D array of PNIPAM microgel.Ag nanoparticles were then synthesized in situ inside the microgel spheres by introduction of Ag+ ions into the microgel spheres and reduction with sodium borohydride.The resulting 2D arrays are highly ordered.The inter-particle distance in the array can be tuned.In addition,the method allows the synthesis of large size arrays and the use of nonplanar substrate. 相似文献
This paper reports a simple spin-coating technique for rapidly fabricating three types of technologically important materials--colloidal crystal, macroporous polymer, and polymeric nanocomposite, each with high crystalline qualities and wafer-scale sizes. Dispersion of monodisperse silica colloids in triacrylate monomers is spin-coated onto a variety of substrates. Shear-induced ordering and subsequent polymerization lead to the formation of three-dimensionally (3D) ordered colloidal crystals trapped inside a polymer matrix. The thickness of as-synthesized colloidal crystal-polymer nanocomposite is highly uniform and can be controlled simply by changing the spin speed and time. Selective removal of the polymer matrix and silica spheres lead to the formation of large-area colloidal crystals and macroporous polymers, respectively. The wafer-scale process is compatible with standard semiconductor microfabrication, as multiple micrometer-sized patterns can be created simultaneously for potential device applications. Normal-incidence transmission spectra in the visible and near-infrared regions show distinct peaks due to Bragg diffraction from 3D ordered structures. The spin-coating process opens a new route to the fundamental studies of shear-induced crystallization, melting and relaxation. 相似文献
We demonstrate an approach using temperature-dependent hydrogel depletants to thermoreversibly tune colloidal attraction and interfacial colloidal crystallization. Total internal reflection and video microscopy are used to measure temperature-dependent depletion potentials between approximately 2 microm silica colloids and surfaces as mediated by approximately 0.2 microm poly-N-isopropylacrylamide (PNIPAM) hydrogel particles. Measured depletion potentials are modeled using the Asakura-Oosawa theory while treating PNIPAM depletants as swellable hard spheres. Monte Carlo simulations using the measured potentials predict reversible, quasi-2D crystallization and melting at approximately 27 degrees C in quantitative agreement with video microscopy images of measured microstructures (i.e., radial distribution functions) over the temperature range of interest (20-29 degrees C). Additional measurements of short-time self-diffusivities display excellent agreement with predicted diffusivities by considering multibody hydrodynamic interactions and using a swellable hard sphere model for the PNIPAM solution viscosity. Our findings demonstrate the ability to quantitatively measure, model, and manipulate kT-scale depletion attraction and phase behavior as a means of formally engineering interfacial colloidal crystallization. 相似文献
A new kind of hollow hydrogel microfiber with discontinuous hollow structure was prepared by an ice-segregation-induced self-assembly process. Monodisperse thermo-responsive hollow poly（N-isopropylacrylamide）（PNIPAM） microgels were first synthesized by seed precipitation polymerization using colloidal Si O2 nanoparticles as seeds, followed by removing the silica cores of the formed Si O2/PNIPAM core/shell composite microgels with hydrofluoric acid. Then, the discontinuously hollow hydrogel microfibers were produced by unidirectional freezing of 1 wt% hollow PNIPAM microgel aqueous dispersion in liquid nitrogen bath, followed by freeze-drying to remove the formed ice crystals. Many orderly arrayed dents were observed on the surfaces of the hydrogel microfibers by field-emission scanning electron microscopy, indicating that they are constructed by closely packed monodisperse hollow PNIPAM microgels. The effect of freezing method and the hollow microgel concentration in the aqueous dispersion on the morphological structure of the hollow hydrogel microfibers was investigated. 相似文献
We present a novel and simple method to fabricate two-dimensional (2D) poly(styrene sulfate) (PSS, negatively charged) colloidal crystals on a positively charged substrate. Our strategy contains two separate steps: one is the three-dimensional (3D) assembly of PSS particles in ethanol, and the other is electrostatic adsorption in water. First, 3D assembly in ethanol phase eliminates electrostatic attractions between colloids and the substrate. As a result, high-quality colloidal crystals are easily generated, for electrostatic attractions are unfavorable for the movement of colloidal particles during convective self-assembly. Subsequently, top layers of colloidal spheres are washed away in the water phase, whereas well-packed PSS colloids that are in contact with the substrate are tightly linked due to electrostatic interactions, resulting in the formation of ordered arrays of 2D colloidal spheres. Cycling these processes leads to the layer-by-layer assembly of 3D colloidal crystals with controllable layers. In addition, this strategy can be extended to the fabrication of patterned 2D colloidal crystals on patterned polyelectrolyte surfaces, not only on planar substrates but also on nonplanar substrates. This straightforward method may open up new possibilities for practical use of colloidal crystals of excellent quality, various patterns, and controllable fashions. 相似文献
The crystal growth of dense and almost monodisperse colloids has been investigated during recent years, but less is known about the melting behavior. The current study thus focuses on this topic. Monodisperse hard spheres were found to crystallize for certain concentrations (49-58 vol %), after sufficiently long times. The characteristics of the crystal growth change when the colloidal particles are polydisperse. Finally, when the size distribution function of the particles is broad enough, the crystallization no longer took place. Dense oil-in-water emulsions with polydispersities of around 10% were successfully produced, and in a first approximation, these emulsions behaved like hard spheres. The polydispersity of the emulsions was sufficiently high to avoid crystallization in equilibrium but low enough to induce a disorder-to-order transition under shear. The formed crystals started to melt once the shear was discontinued. The melting behavior of these "oil droplet crystals" was investigated by means of time-resolved static light scattering experiments, and it was found that crystallization could be induced in a concentration regime between 46 and approximately 74 vol %. The melting behavior of these crystals depended strongly on the concentration. The typical melting times ranged from a few seconds to several hours or days when the concentration was increased. It was speculated that this phenomenon could be explained by the strong dependence of the mobility of the oil droplets on the volume fraction, as verified by dynamic light scattering experiments on oil-in-water emulsions in a similar concentration regime. 相似文献
This work shows that mesoporous polymeric films with spherical and elliptical pores can be obtained by in situ structure inversion of the azo polymer colloid arrays through selective interaction with solvent. The epoxy-based azo polymer contained both the pseudo-stilbene-type azo chromophores and the hydrophilic carboxyl groups. The colloidal spheres of the azo polymer were prepared by gradual hydrophobic aggregation of the polymeric chains in THF-H2O media, induced by a steady increase in the water content. Ordered 2D arrays of the hexagonally close-packed colloidal spheres were obtained by the vertical deposition method. After the solvent (THF) annealing, the ordered 2D arrays were directly transformed to mesoporous films through the sphere-pore inversion. Under the same condition, the 2D arrays composed of the ellipsoidal colloids, which were obtained by the irradiation of a polarized Ar+ laser beam on the colloidal sphere arrays, could be transformed to films with ordered elliptical pores. To our knowledge, this is the first example to demonstrate that mesoporous structures can be directly formed from the colloidal arrays of a homopolymer through structure inversion. This observation can shed new light on the nature of self-assembly processes and provide a feasible approach to fabricate mesoporous structures without the infiltration-removal step. By exploring the photoresponsive properties of the materials, mesoporous film with special pore structure and properties can be expected. 相似文献
The controlled introduction of artificial extrinsic defects is critical to achieve the functions of photonic crystals. Smart defects capable of responding to external stimuli lead to more advanced applications. Here we report a microgel colloidal crystal with a defect state which could be induced and erased reversibly by external stimuli. The crystal was assembled from PNIPAM microgel and P(NIPAM‐AAc) microgel of the same size. The resulting doped crystal does not exhibit a defect state in its stop band because of the similar optical properties of the dopant and the host. By increasing the pH value, however, the dopant P(NIPAM‐AAc) spheres swell to a larger size and turn into real defects in the crystal, resulting in the appearance of defect state. Adjusting the pH value back restores the size of the dopant spheres, and thus erases the defect state. Temperature, a second external stimulus, could also be used to induce and erase defect states of the crystal. 相似文献
We have developed a series of emulsion polymerization recipes for the synthesis of highly charged, monodisperse polystyrene colloids of diameters between 100-400 nm. These spherical colloidal particles were crosslinked with divinyl benzene and functionalized with 1-allyloxy-2-hydroxypropane sulfonate. These highly charged, monodisperse colloidal particles readily self-assemble into robust three-dimensionally ordered crystalline colloidal arrays (CCAs). These CCAs operate as photonic crystals that Bragg diffract light in the ultraviolet, visible, and infrared regions of the spectrum. Copyright 2000 Academic Press. 相似文献
下载免费PDF全文