碳酸二甲酯法合成1,5-萘二氨基甲酸甲酯的反应机理

 应用红外光谱技术研究了在乙酸锌催化作用下1,5-萘二胺与碳酸二甲酯甲氧基羰基化反应机理. 结果表明,二水合乙酸锌只有失去两个结晶水变成无水乙酸锌后才能产生催化活性. 无水乙酸锌与1,5-萘二胺形成一个新的配位络合物,该配位络合物是一个适宜的亲核试剂,能与碳酸二甲酯进行亲核反应,生成1,5-萘二胺的甲氧基羰基化产物. 在无水乙酸锌与1,5-萘二胺形成配位络合物的过程中,无水乙酸锌的结构从双齿型转变成单齿型.     

碳酸二甲酯法合成1，5-二氨基甲酸甲酯的反应机理

应用红外光谱技术研究了在乙酸锌催化作用下1，5-萘二胺与碳酸二甲酯甲氧基羰基化反应机理．结果表明，二水合乙酸锌只有失去两个结晶水变成无水乙酸锌后才能产生催化活性．无水乙酸锌与1，5-萘二胺形成一个新的配位络合物，该配位络合物是一个适宜的亲核试剂，能与碳酸二甲酯进行亲核反应，生成1，5-萘二胺的甲氧基羰基化产物．在无水乙酸锌与1，5-萘二胺形成配位络合物的过程中，无水乙酸锌的结构从双齿型转变成单齿型．     

乙酸盐上二氧化碳和二醇合成环状碳酸酯

在乙腈体系中,以不同的乙酸盐作催化剂,研究了CO2与二醇合成环状碳酸酯的反应.乙腈在反应过程中不仅是溶剂,而且还起到了脱水剂的作用,促进了反应的进行.以1,2-丙二醇为反应物对催化剂进行筛选,发现无水乙酸锌具有最高的催化活性.在无水乙酸锌上考察了二氧化碳和不同二醇的反应,结果表明,五元环碳酸酯的产率明显高于六元环碳酸酯,其中碳酸丙烯酯的产率最高.以1,2-丙二醇为反应基质,无水乙酸锌为催化剂,确定了最佳反应条件,1,2-丙二醇100 mmol,乙睛10 mL,催化剂2.5 mmol,反应压力10 MPa,温度170 ℃,反应12 h.在此条件下,碳酸丙烯酯的产率达到了24.2%,1,2-丙二醇的转化率为38.9%.     

Reactivities of carboxyalkyl-substituted 1,4,5,8-naphthalene diimides in aqueous solution

A series of water-soluble 1,4,5,8-naphthalene diimide derivatives has been prepared and their redox and photophysical properties characterized. From laser flash photolysis studies, the triplet excited state of N,N'-bis[2-(N-pyridinium)ethyl]-1,4,5,8-naphthalene diimide (NDI-pyr) was found to undergo oxidative quenching with the electron donors DABCO, tyrosine, and tryptophan as expected from thermodynamics. Interestingly, the reactivities of naphthalene diimides (NDI) possessing alpha- and beta-carboxylic acid substituents (R = -CH2COO-, -C(CH3)2COO-, and -CH2CH2COO-) were strikingly different. In these compounds, the transient produced upon 355 nm excitation did not react with the electron donors. Instead, this transient reacted rapidly (k > 10(8)-10(9) M-1 s-1) with known electron acceptors, benzyl viologen and ferricyanide. The transient spectrum of the carboxyalkyl-substituted naphthalimides observed immediately after the laser pulse was nearly identical to the one-electron-reduced form of 1,4,5,8-naphthalene diimide (produced independently using the bis-pyridinium-substituted naphthaldiimide). From our studies, we conclude that the transient produced upon nanosecond laser flash photolysis of NDI-(CH2)nCOO- is the species produced upon intramolecular electron transfer from the carboxylate moiety to the singlet excited state of NDI. In separate experiments, we verified that the singlet excited state of NDI-pyr does, indeed, react intermolecularly with acetate, alanine, and glycine. The process is further substantiated using thermodynamic driving force calculations. The results offer new prospects of the efficient photochemical production of reactive carbon-centered radicals.     

A one-pot pseudo nine-component isocyanide-based reaction: synthesis of a new class of zinc 1,5-disubstituted 1H-tetrazol-5-yl coordination complexes

A novel one-pot pseudo nine-component synthesis of zinc 1,5-disubstituted 1H-tetrazol-5-yl coordination complexes in good yields starting from simple and readily available substrates, including a 1,3-dicarbonyl compound, an isocyanide, N,N-dimethylformamide dimethyl acetal, sodium azide, and zinc chloride in methanol at ambient temperature, is described.     

Convenient extraction method for quantification of thin zinc patina layers

Synthetic zinc patina was grown on galvanized steel sheets in supercritical carbon dioxide atmosphere. Different patina compounds were dissolved and quantified using a stepwise immersion and dissolution procedure. The distinct patina components, namely anhydrous zinc carbonate (a dense layer adjacent to metallic zinc) and zinc hydroxy carbonate (nanowires on the surface), were dissolved in glycine solutions, followed by quantification of Zn²⁺ in the solutes by X‐ray fluorescence. The zinc hydroxy carbonate nanowires were readily glycine soluble, and the anhydrous zinc carbonate showed scarce glycine solubility, which enabled their selective quantification. The amount of the remaining (anhydrous) zinc carbonate after glycine extraction was determined from the glycine‐soluble zinc oxide after calcination (heat treatment for 10 minutes at 350°C). The results were verified by scanning electron microscopy imaging and Fourier transform infrared spectroscopy measurements.     

Linear polythioesters. III. Products of interfacial polycondensation of 1,4-, 1,5-di(mercaptomethyl)-naphthalene,and their mixture with adipoyl and sebacoyl chlorides

New polythioesters of naphthalene derivatives by polycondensation of 1,4-di(mercaptomethyl)-naphthalene, 1,5-di(mercaptomethyl)naphthalene, as well as their mixture with adipoyl and sebacoyl chlorides have been obtained. Low-temperature and high-temperature solution polycondensation as well as interfacial polycondensation have been used. Interfacial polycondensation proved to be the most useful. To define the optimal conditions of interfacial polycondensation, the following factors influencing the process have been studied: ratio of aqueous to organic phase, concentration of hydrochloride acceptor, temperature of reaction and rate of addition of acid chloride, contribution of emulsifier and catalyst. Yield for all reaction products and reduced viscosity have been found. The structure of polythioesters of high-value viscosity and good yield was determined from elementary analysis, infrared spectra, x-ray, and thermogravimetric analysis. Some mechanical and electrical properties of the polythioesters obtained from the mixture of 1,4- and 1,5-di(mercaptomethyl)naphthalene have been studied after pressing in increased temperature. The molecular weight was not determined because of very low solubility.     

Synthesis of thieno[2,3‐b][1,5]benzoxazepine derivatives

A new series of 4‐(4‐methylpiperazin‐1‐yl)thieno[2,3‐b][1,5]benzoxazepines 1a‐k has been synthesized from 4‐bromo‐2‐methylthiophene 6 or ethyl 2‐amino‐4,5‐dimethyl‐3‐thiophencarboxylate 10 . Preparation of the key intermediate thieno[2,3‐b][1,5]benzoxazepine‐4(5H)‐ones 4a‐i, 4k were carried out by treatment of 2‐bromo‐N‐(2‐hydroxyphenyl)‐3‐thiophencarboxamides 5a‐i, 5k with potassium carbonate in DMSO. Compounds 1 are thienoanalogues of loxapine, a potent antipsychotic drug. Of these compounds, the neu‐roleptic activity of 2‐methyl‐4‐(4‐methylpiperazin‐l‐yl)thieno[2,3‐b][1,5]benzoxazepine 1a (R¹, R³=H, R²=CH₃) demonstrated potent antipsychotic activity.     

Studies on the Simultaneous Synthesis of Dimethyl Carbonate and Poly（ethylene terephthalate）： I. Catalytic Activity of Metal Acetate in Transesterification of Ethylene Carbonate with Dimethyl Terephthalate

Dimethyl carbonate (DMC) is a new building block of organic synthesis, as an environmentally benign compound and unique intermediate, it has been attracted much attention. Among the various methods for synthesizing DMC, transesterification of ethylene car…     

Micropatterning of ZnO nanoarrays by forced hydrolysis of anhydrous zinc acetate

Micropatterns of ZnO nanoarrays were simply and successfully fabricated in an aqueous solution without any high-temperature treatment and/or expensive catalyst. In situ forced hydrolysis of patterned anhydrous zinc acetate, derived by ultraviolet irradiation with a photomask, resulted in heterogeneous nucleation and growth to form ZnO nanoarrays. Micropatterns of ZnO nanoarrays were characterized by FE-SEM and XRD. ZnO nanoarrays were well site-selectively deposited on anhydrous zinc acetate coated regions at 88 degrees C. HR-TEM clarified the formation mechanism in which anhydrous zinc acetate showed a tendency of forced hydrolyzation to ZnO nanocrystals at the initial stage in the reaction solution.     

Corrosion product formation on zinc-coated steel in wet supercritical carbon dioxide

In a wet supercritical carbon dioxide atmosphere, carbon dioxide is dissolved into water and causes corrosion of zinc-coated steel. The first corrosion products appeared in singular nano-scale initiation sites, which gradually grew in number and size and ultimately covered the whole surface. Zinc hydroxy carbonate was detected as a rapidly forming needle-like corrosion product, which prevailed at short exposure times (from minutes to hours). A prolonged exposure caused conversion of zinc hydroxy carbonate to anhydrous zinc carbonate with high crystallinity and a stable, dense layer was formed on zinc. The chemical transition from zinc hydroxy carbonate to anhydrous carbonate was reported for the first time and is in the light of current literature unique for wet scCO₂ atmosphere.     

Green Synthetic Method for 1,5‐Disubstituted Carbohydrazones

A green synthetic method for 1,5‐disubstituted carbohydrazones is described. The reaction of dimethyl carbonate with hydrazine hydrate first gave carbohydrazide, which further reacted with various aromatic aldehydes or aliphatic ketones under solvent‐free conditions to efficiently afford 1,5‐disubstituted carbohydrazone. This protocol has the advantages of using nontoxic dimethyl carbonate as starting material, no use of organic solvents, short reaction time, high yield, and simple workup procedure.     

Helical (isotactic) and syndiotactic silver(I) metallo-supramolecular coordination polymers assembled from a readily prepared bis-pyridylimine ligand containing a 1,5-naphthalene spacer

A ligand in which two pyridylimine binding units are linked by a 1,5-naphthalene spacer is prepared and its silver(I) coordination chemistry investigated. In the solid state, a pair of C-H triplebond N interactions between pyridylimine units link the free ligands into chain structures, with further C-H triplebond N and some -stacking interactions linking these chains into a three-dimensional structure. The spacer constrains the ligand to dinucleate, and with silver(I) the metal coordinates to two pyridylimine units from two separate ligands and this leads to the formation of coordination polymers with a range of different anions. Different twisting motifs within the ligand control the tacticity of these coordination polymers and both isotactic, helical polymers and syndiotactic (achiral) polymers result. The core of the isotactic polymer strands contains two metallo-vectors and results in long-range ordering of the metal centres into a 2 x n grid arrangement. The solution behaviour indicates that exchange between the diastereomeric forms occurs. Since this must involve inversion at the metal centres, atactic species may also form a component of the solution library.     

1,5-萘二异氰酸酯与1,4-丁二醇基为基质的多嵌段聚氨酯弹性体的合成与性能

利用 1 ,5_萘二异氰酸酯 (NDI)和 1 ,4_丁二醇 (BDO)为均匀硬质分子单体 ,与不同软质分子单体 (聚醚、聚酯、聚硅氧烷 )缩合制备多嵌段聚氨酯弹性体 ,详细研究了硬嵌段相 (NDI)弹性体的结构与性能间的关系 ,发现随着硬嵌段相长度的增加 ,或者氨基甲酸酯中胺基与聚醚、聚酯、聚硅氧烷中软段氧原子间氢键的减弱 ,都导致微相分离程度的增加 ,造成聚合物熔点和熔化热的升高。硬嵌段相熔化的多峰行为是由于形成了NDI/BDO半微晶区 ,在退火时转变为更加有序的结晶微区 ,当温度高于 1 80℃时 ,由于氢键的断裂 ,NDI/BDO硬嵌段发生分解反应 ,该过程源于不很有序的硬嵌段半结晶微区。当温度高于 2 5 0℃时 ,发生快速的分解。在动态力学行为方面 ,NDI基聚醚弹性体比其它硅氧烷基的弹性体展示了更高的硬嵌段区的稳定性 ,同时 ,在使用温度范围内 ,也显示出最高的储能模量值 ,表明刚性对温度的依赖性 ,以及NDI/BDO硬嵌段中活性填料的显著影响     

Transesterification of Ethylene Carbonate with Dimethyl Terephthalate over Various Metal Acetate Catalysts

IntroductionDimethyl carbonate(DMC) is known to be a novelbuilding block in organic synthesis. As an environmen-tally benign compound and a unique intermediate,DMC has attracted much attention[1,2]. Among the va-rious methods for synthesizing DMC, the tra…     

Structure–property relationships of novel fluorinated polycarbonate polyurethane films with high transparency and thermal stability

Research on Chemical Intermediates - Novel polycarbonate diol (PCDL) was synthesized using dimethyl carbonate, 1,5-pentanediol (1,5-PD), 1,6-hexanediol (1,6-HD) and 1,4-cyclohexanedimethanol...     

Synthsis and mild conversion of 1,5-benzodiazepine iminothioethers into hydrazides

4-Methylthio-2,3-dihydro-1H-1,5-benzodiazepine derivatives were prepared by alkylation of tetrahydro-1H-1,5-benzodiazepine-2-thiones with iodomethane or dimethyl sufate in the presence of base or using phase-transfer catalysis. The desired 4-acyl-hydrazino-2,3-dihydro-1H-1,5-benzodiazepines resulted from the reaction of iminothioethers with hydrazides.Institute of Biochemistry, Vilnius 2600, Lithuania. Published in Khimiya Geterotsiklicheskikh Soedinenii, No. 3, pp. 368–372, March, 1998.     

Conditions for the Selective Conversion of Quaternary 3-Anilino-1,5-dimethylpyrazolium Salts into 3-Anilino-1,5-dimethylpyrazole

The possibility has been studied of converting quaternary 3-anilino-1,5-dimethylpyrazolium salts into 3-anilino-1,5-dimethylpyrazole, the first representative of the 1-alkyl-3-arylaminopyrazoles. The dependence of the reaction direction on the nature of the substituent at position 2 has been clarified. The most effective result was obtained with a cyanoethyl substituent. On boiling the initial salt with aqueous ammonia the target product is isolated in quantitative yield. Syntheses of the initial salts are described. C-Sulfonation was detected on interacting 3-anilino-1-benzoyl-3-methylpyrazole and dimethyl sulfate, with the formation of p-(3-amino-1,2,5-trimethylpyrazolio)benzenesulfonate.     

Comparative characterisation of zinc oxide thin films prepared from zinc acetate with or without water of hydration via the sol–gel method

Zinc oxide thin films were prepared using either zinc acetate dihydrate or anhydrous zinc acetate via the sol–gel method. Comparative characterisation of the crystallographical, morphological, optical/spectroscopical and electrical properties of the so-obtained films was performed. The idea of one- (in the case of the anhydrous precursor), and two- (in the other case) stage hydrolysis/condensation was postulated, which was supported by the characterisation results. The film prepared using the anhydrous precursor had a more pronounced c-axis crystal orientation preference, with a larger average crystallite size and more porous morphology. The transparency of this film was significantly lower over the UV/visible region due to its more porous morphology, which also resulted in lower intensity of the ‘near band edge emission’, and higher electrical resistivity. The overall results also suggested that anhydrous zinc acetate could be employed as a precursor for the sol–gel synthesis of zinc oxide thin films, which might have potential advantages in microelectronic and optoelectronic applications.     

Cyclic tautomer of 1,5-diacetyl-4,8-dihydroxynaphthalene and its reaction with hydrazine

Demethylation of 1,5-diacetyl-4,8-dimethoxynaphthalene by the action of anhydrous aluminum chloride gave 6-acetyl-2,5-dihydroxy-2-methylnaphtho[1,8-bc]furan which reacted with hydrazine to produce 3,8-dimethyl-1,2,6,7-tetraazapyrene.