Ionic liquids as stationary phases in gas chromatography: Determination of chlorobenzenes in soils

The present research focuses on the evaluation of different ionic liquid (IL) stationary phases in gas chromatography. The different IL columns were evaluated in terms of peak resolution (R_s) and peak symmetry for the separation of the chlorobenzenes. The determination of chlorobenzenes in soil samples by means of the optimal IL stationary phase (SLB‐IL82) is proposed as an application. Soil pretreatment was based on a simplified quick, easy, cheap, effective, rugged, and safe extraction procedure and a large injection volume via a programed temperature vaporizer working in solvent vent mode. The retention time of the chlorobenzenes increased as the polarity of the IL column decreased. SLB‐IL82 is the stationary phase that provides the best values as regards R_s and asymmetry factor. Soil sample blanks were spiked with the analytes before subjecting the sample to the extraction process. The existence of a matrix effect was checked and the analytical characteristics of the method were determined in a fortified garden soil sample. The method provided good linearity, good repeatability and reproducibility values, and the LODs were in the 0.1–4.7 μg/kg range. Two fortified soil samples were applied to validate the proposed methodology.     

Evaluation of ionic liquid stationary phases for one dimensional gas chromatography-mass spectrometry and comprehensive two dimensional gas chromatographic analyses of fatty acids in marine biota

Ionic liquid stationary phases were tested for one dimensional gas chromatography-mass spectrometry (GC-MS) and comprehensive two dimensional gas chromatography (GC×GC) of fatty acid methyl esters from algae. In comparison with polyethylene glycol and cyanopropyl substituted polar stationary phases, ionic liquid stationary phases SLB-IL 82 and SLB-IL 100 showed comparable resolution, but lower column bleeding with MS detection, resulting in better sensitivity. The selectivity and polarity of the ionic liquid phases are similar to a highly polar biscyanopropyl-silicone phase (e.g. HP-88). In GC×GC, using an apolar polydimethyl siloxane×polar ionic liquid column combination, an excellent group-type separation of fatty acids with different carbon numbers and number of unsaturations was obtained, providing information that is complementary to GC-MS identification.     

Comprehensive two-dimensional gas chromatography using a high-temperature phosphonium ionic liquid column

A high-temperature ionic liquid, trihexyl(tetradecyl)phosphonium bis(trifluoromethane)sulfonamide, was used as the primary column stationary phase for comprehensive two-dimensional gas chromatography (GC × GC). The ionic liquid (IL) column was coupled to a 5% diphenyl/95% dimethyl polysiloxane (HP-5) secondary column. The retention characteristics of the IL column were compared to polyethylene glycol (DB-Wax) and 50% phenyl/50% methyl polysiloxane (HP-50+). A series of homologous compounds that included hydrocarbons, oxygenated organics, and halogenated alkanes were analyzed with each column combination. This comparison showed that the ionic liquid is less polar than DB-Wax but more polar than HP-50+. The most unique feature of the IL × HP-5 column combination is that alkanes, cyclic alkanes, and alkenes eluted in a narrow band in the GC × GC chromatogram; whereas, these compounds occupied a much larger portion of the DB-Wax × HP-5 and the HP-50+ × HP-5 chromatograms. Each column combination was used to analyze diesel fuel. The IL × HP-5 chromatogram displayed narrow bands for three major compound classes in diesel fuel: saturates, monoaromatics, and diaromatics. The IL column was used at temperatures as high as 290 °C for several months without any noticeable changes in column performance.     

The thermal degradation of polysiloxanes—Part 4: Poly(dimethyl/diphenyl siloxane)

Poly(dimethyl/diphenyl siloxanes) have been prepared with a range of phenyl group contents both from mixtures of dimethyl and diphenyl cyclic siloxanes and from cyclic siloxanes in which both dimethyl and diphenyl structures are present. Attempts to prepare poly(diphenyl siloxane) with a reasonably high molecular weight were unsuccessful.The products of degradation of the poly(dimethyl/diphenyl siloxanes) are benzene and complex mixtures of cyclic oligomers which have been separated, identified and analysed. The characteristics of the formation of these products are discussed in relation to the degradation reactions which occur in poly(dimethyl siloxane), poly(methyphenyl siloxane) and poly(dimethyl/methylphenyl siloxane) and which have been described previously.     

Assessment of ionic liquid stationary phases for the GC analysis of fatty acid methyl esters

The gas chromatographic separation of fatty acid methyl esters (FAMEs) on ionic liquid stationary phases was investigated. Seven commercially available ionic liquid columns were tested using a test mixture containing 37 fatty acid methyl esters. The influence of column temperature on the elution order was studied using five different temperature programs. Retention times were highly reproducible. Similar retention behavior was observed for the IL59, IL60, and IL61 columns. The peak pair C18:1 cis/trans was not baseline resolved on these columns, whose stationary phases are highly similar. C18:2 cis/trans, C18:3 n6/n3, and C20:3 n6/n3 were baseline separated on all columns. Baseline separation of the complete test mix was only obtained on the IL82 column using a heating rate of 5 K/min. In general, retention times decreased with increasing column polarity but unsaturated FAMEs were retained stronger compared to their saturated counterparts. Except for the IL59 column, retention crossover was observed when the temperature program was changed.     

Analysis of phytosterols and phytostanols in enriched dairy products by Fast gas chromatography with mass spectrometry

A Fast gas chromatography and mass spectrometry method for plant sterols/stanols analysis was developed, using a short capillary gas chromatography column (10 m × 0.1 mm internal diameter × 0.1 μm film thickness) coated with 5% diphenyl‐polysiloxane. A silylated mixture of the main plant sterols/stanols standards (β‐sitosterol, campesterol, stigmasterol, campestanol, sitostanol) was well separated in 1.5 min, with a good peak resolution (>1.4, determined on a critical chromatographic peak pair (β‐sitosterol and sitostanol)), repeatability (<13%), and sensitivity (<0.017 ng/mL). The suitability of this Fast chromatography method was tested on plant sterols/stanols‐enriched dairy products (yogurt and milk), which were subjected to lipid extraction, cold saponification, and silylation prior to injection. The analytical performance (sensitivity < 0.256 ng/mL and repeatability < 10.36%) and significant reduction of the analysis time and consumables demonstrate that Fast gas chromatography‐mass spectrometry method could be also employed for the plant sterols/stanols analysis in functional dairy products.     

Expanding the Applications of the Ionic Liquids as GC Stationary Phases: Plasticizers and Synthetic Musks Fragrances

The exceptional properties of the ILs make them ideal for gas chromatography stationary phases. New stationary phases exhibiting good separation selectivity, high efficiency, and high thermal stability are in high demand. Recently, several gas chromatographic capillary columns containing IL stationary phases of various polarities have been introduced on the market. The aim of this work is to extend the applications of the ILs as GC column coatings. The effectiveness of five different commercial IL columns (SLB™-IL59, SLB™-IL76, SLB™-IL82, SLB™-IL100 and SLB™-IL111) for the analysis of two different families of emerging contaminants of environmental concern (plasticizers and synthetic musk fragrances) has been explored. The results obtained for these two families of compounds are compared with the ones obtained when using a (5 %-phenyl)-methylpolysiloxane column. For three of these IL columns, applications have not yet been described. Good resolution for the most of the studied emerging pollutants belonging to five different analytical groups (adipates, phthalates, macrocyclic musks, nitromusks and polycyclic musks) was achieved in all the IL columns.

     

Application of Comprehensive Two‐Dimensional Gas Chromatography (GC×GC) to the Qualitative Analysis of Essential Oils

This paper investigates the separation of moderately complex samples by comprehensive two‐dimensional gas chromatography (GC×GC). The analysis of peppermint (Mentha piperita) and spearmint (Mentha spicata) essential oil components, including acetates, alcohols, furans, ketones, sesquiterpenes, and terpenes, was achieved by one‐dimensional gas chromatography with quadrupole mass spectrometry detection (GC/MSD) and GC×GC with flame ionization detection. Peppermint essential oil was found to contain 89 identifiable peaks by GC×GC compared to 30 peaks in the GC/MSD chromatogram. Likewise, 68 peaks were found in the GC×GC chromatogram of spearmint (compared to 28 in GC/MSD). Plots of the first dimension versus second dimension retention times provided a fingerprint of the two essential oils, which revealed 52 similar compounds between the two essential oils as opposed to 18 matches by 1D GC.     

南方马尾松松针挥发油成分的气相色谱/质谱分析

采用水蒸了蒸馏方法从中国南方新鲜马尾松松针中提取出挥发油,利用气相色谱／质谱（ＧＣ／ＭＳ）联用技术对其化学成分进行了分析,共分离出９１个峰,各组分经数据库标准图谱核对,得到分子结构。其中３６种化合物的含量较高,占总离子流的８３．０５％,主要是单萜和倍半萜,以及少量萜烯的醇、酯类化合物。     

Facile Fabrication of Polymeric Ionic Liquid Grafted Porous Polymer Monolith for Mixed‐Mode High Performance Liquid Chromatography

A novel polymeric ionic liquid grafted porous polymer monolith has been facilely fabricated for mixed‐mode chromatography. The column is prepared from poly (glycidyl methacrylate‐co‐ethylene dimethacrylate) monolith through hydrolyzation of the epoxy moieties into hydroxyl groups, followed by "grafting from" polymerization of ionic liquid of 1‐vinyl‐3‐butylimidazolium chloride. Successful modification is characterized by scanning electron microscope, infrared spectroscopy, elemental analysis and mercury intrusion porosimetry. The HPLC performance of developed column is evaluated by separating acidic vitamin B analytes, neutral steroids and basic aromatic amines in mixed‐mode chromatography on a single column, respectively. The ionic liquid affords the monolith with both enhanced separation ability and improved column efficiency.     

A rapid method for the determination of brominated flame retardant concentrations in plastics and textiles entering the waste stream

Due to new European legislation, products going to waste are subject to ‘low persistent organic pollutant concentration limits’. Concentrations of restricted brominated flame retardants in waste products must be determined. A rapid extraction and clean‐up method was developed for determination of brominated flame retardants in various plastics and textiles. The optimised method used vortexing and ultrasonication in dichloromethane followed by sulfuric acid clean‐up to determine target compounds. Poly‐brominated diphenyl ethers were determined by gas chromatography with mass spectrometry and hexabromocyclododecane by liquid chromatography with tandem mass spectrometry. Good recoveries of target analytes were obtained after three extraction cycles. The method was validated using poly‐propylene and poly‐ethylene certified reference materials as well as previously characterised textiles, expanded and extruded poly‐styrene samples. Measured concentrations of target compounds showed good agreement with the certified values indicating good accuracy and precision. Clean extracts provided low noise levels resulting in low limits of quantification (0.8–1.5 ng/g for poly‐brominated diphenyl ethers and 0.3 ng/g for α‐, β‐ and γ‐hexabromocyclododecane). The developed method was applied successfully to real consumer products entering the waste stream and it provided various advantages over traditional methods, including reduced analysis time, solvent consumption, minimal sample contamination and high sample throughput, which is crucial to comply with the implemented legislation.     

Comprehensive two-dimensional gas chromatography in the analysis of volatile samples of natural origin: a multidisciplinary approach to evaluate the influence of second dimension column coated with mixed stationary phases on system orthogonality

The study evaluates the influence of selectivity tuning of the stationary phase of the second dimension on the orthogonality of a comprehensive two-dimensional gas chromatography (GC x GC) system. Two different sets of columns, providing independent and semi-independent separation mechanisms were used. The first consisted of a first dimension separating analytes on a volatility basis (i.e. a non-polar polydimethylsiloxane (OV1) column) combined with a second dimension separating by polarity, using columns coated with 100% polyethylene glycol (CW20M), CW20M/OV1 mixtures in ratios of 25-75%, and polydimethylsiloxane, 7% phenyl, 7% cyanopropyl (OV1701). The second set consisted of a first dimension separating analytes on a polarity basis (100% CW20M column) combined with a second dimension separating by volatility, consisting of columns coated with 100% OV1, OV1/CW20M mixtures in ratios of 25-75%, and 100% OV1701. Medium-complexity mixtures of natural origin (i.e. peppermint essential oil and a standard mixture of suspected allergens) consisting of components in a relatively limited range of molecular weights (MW) and volatilities, but belonging to different classes of compounds in a wide range of polarity (mono- and sesquiterpenoids, hydrocarbons and oxygenated compounds) were analysed with the above sets of columns. Different approaches were used to evaluate peak spreading on the GC x GC separation plane and degree of orthogonality of the column sets, namely: (1) a Factor Analysis (FA) approach, estimating the correlation coefficients and spreading angles of the sample components in the two-dimensional chromatographic plane; (2) an Informational Theory (IT) approach, based on determining a group of parameters including: informational entropy, % synentropy and similarity (H); and (3) an approach based on estimating the amount of separation space used, i.e. a practical parameter that directly refers to the experimental separation plane of the GC x GC chromatogram. Results showed that peak spreading in the chromatographic plane, when CW20M and OV1 are combined in different ratios, can be predicted from retention mechanisms, and that the degree of orthogonality measured with different approaches, is consistent with the divergent nature, in terms of polarity of the stationary phases combined in the GC x GC system.     

Analysis of Trace-Level Volatile Compounds in Fresh Turf Crop （Lolium perenne L.） by Gas Chromatography Quadrupole Time-of-Flight Mass Spectrometry

In the traditional research of volatile compounds, some trace-level compounds could not be identified by gas chromatography-mass spectrometry. Target and post-targeted methods were applied in the investigation of trace-level volatile compounds in fresh turf crop （Lolium perenne L.） based on gas chromatography in combination with hybrid quadrupole time-of-flight mass spectrometry. According to literatures published, a target analysis was performed by using retention index, accurate masses of characteristic ions and second-stage mass spectra （MS2 spectra）. And a series of experiments showed that low electron impact energy was beneficial to the improvement of the abundances of low abundance molecular ion peak. peak was beneficial to qualitative analysis. Totally, 60 Enhancing the abundances of low abundance molecular ion volatile compounds were identified, the great majority cornpounds of which were benzeneacetaldehyde （14.8%）, 2,5-dimethyl-pyrazine （9.6%）, and hexanal （9.3%）. Identification was complied by mass spectral search, retention index and accurate masses of characteristic ions.     

Nanoliter capillary electrochromatography columns based on collocated monolithic support structures molded in poly(dimethyl siloxane).

Following current trends in miniaturization of analytical chemistry, an inexpensive disposable analytical tool in the form of a liquid chromatography column fabricated on a poly(dimethyl siloxane) (PDMS) chip was created. Ease of fabricating the chromatography column was demonstrated by molding collocated monolithic support structures (COMOSS) directly in the column. Positive photo-resist, SPR 220, was used to create column structures on a negative relief master providing final channel dimensions of 2.7-5.2 microm wide by 10.0 microm deep, while monolithic dimensions were 9.8 x 9.8 x 10.0 microm - 12.3 x 12.3 x 10.0 microm. The ability to separate biological samples such as peptides from a tryptic digest of fluorescein isothiocyanate labeled bovine serum albumin (FITC-BSA) was shown. Separations in capillary electrochromatographic (CEC) mode were performed yielding column efficiencies of 4.0 x 10(5) plates/m.     

Two new oxygen‐containing biomarkers isolated from the Chinese Maoming oil shale by silica gel column chromatography and preparative gas chromatography

Two biomarkers, 5,9‐dimethyl‐6‐isopropyl‐2‐decanone ( 1 ) and 4,9,11‐trimethyl‐6‐isopropyl‐2‐dodecanone ( 2 ), were isolated from Chinese Maoming oil shale by silica gel column chromatography and preparative gas chromatography. Their structures were elucidated by using spectroscopic techniques.     

气相色谱-质谱联用分析花椒挥发油的成分

 采用气相色谱 质谱联用技术对陕西富平产花椒挥发油的成分进行了分析 ,分离出了 17个峰 ,鉴定出了相对峰面积大于 1 0 %的组分共 16个 ,用峰面积归一化法定量测定了已确定组分的相对含量 ,其占挥发油总质量的95 %以上。     

Synthesis and Characterization of Triphenylphosphine Oxide-Containing Poly(Aryl Imide)-Poly(Dimethyl Siloxane) Randomly Segmented Copolymers

Abstract

Poly(aryl imide)-poly(dimethyl siloxane) randomly segmented copolymers were synthesized by essentially a one-step solution imidization process in a solvent system consisting of predominately o-dichlorobenzene with a small amount of n-methylpyrolidone. This solvent combination was selected because of its ability to afford homogeneous solutions throughout the polymerization process. This enabled copolymers of any desired poly(dimethyl siloxane) composition to be prepared. A hydrolytically stable triphenylphosphine oxide containing diamine, bis(3-amino-phenoxy-4′-phenyl)phenylphosphine oxide, was utilized as a chain extender and together with oxydiphthalic anhydride formed the hard segment in these copolymers. The soft segment was formed from α,ω-aminopropyl poly(dimethyl siloxane) oligomers of controlled molecular weight. The presence of phosphorus and silicon contributes several unique properties to the system, including enhanced solubility, thermal stability, and flame resistance. High molecular weight copolymers containing up to 60% (w/w) of the poly(dimethyl siloxane) segments were successfully prepared using this method. Gel permeation chromatography analysis, based on a universal calibration curve in CHCl₃, was performed to determine the molecular weights and distribution. These copolymers with 40-60% (w/w) poly(dimethyl siloxane) exhibited upper T_g values ranging from 130 to 180°C and showed substantial char yields at 750°C in air, which increased with siloxane content. Dynamic mechanical analysis confirmed the anticipated microphase behavior by the presence of two separate glass-transition regions. Both small angle x-ray scattering and transmission electron microscopy measurements determined on well-characterized transparent cast films were used to better demonstrate the multiphase nature of these copolymers.     

A cleanup method of serum extracts with molecular sieves as SPE sorbents for the analysis of polybrominated diphenyl ethers

Based on the size- and shape-selective sorption, 13X molecular sieves were developed as solid-phase extraction adsorbents to cleanup serum extract for the determination of polybrominated diphenyl ethers. The important parameters affecting the cleanup efficiency were investigated including the amount of sorbents, the type, and volume of solvents. Under the optimized conditions, the capacity for removing impurities was evaluated via gel permeation chromatography and gas chromatography with mass spectrometry. The results demonstrated that up to 99% of lipids in corn oil (13 mg) can be removed after cleanup, and endogenous compounds in serum can also be effectively eliminated. The cleanup efficiency is not only superior to hydrophile-lipophile balance column, but also close to acid silica gel and multifunction impurity sorbents. Generally, the developed cleanup method exhibited higher recovery for polybrominated diphenyl ethers with more than four bromines, especially for nona- and deca-brominated diphenyl ethers (99.1˗117.8%). The cleanup method can be coupled with gas chromatography and tandem mass spectrometry for polybrominated diphenyl ethers analysis in human serum. The method detection limits were 0.01˗0.27 ng/mL and average recovery was 50.9˗113.3%, except 2,3',4',6-tetrabrominated, 2,3',4,4',6-pentabrominated, and 2,3,3',4,4',5',6-heptabrominated diphenyl ethers. 2,2',4,5'-Tetrabrominated diphenyl ethers had the highest detection frequency (95%) in human serum, whereas decabrominated diphenyl ethers had the maximum mean concentration (0.50 ng/mL).