毛冬青总皂苷对AHNP诱导肝损伤大鼠骨中7种微量元素的影响

目的探讨了毛冬青总皂苷对AHNP诱导肝损伤大鼠骨中微量元素的影响。方法应用逆行胰胆管术注射牛磺胆酸钠（TAC）复制急性出血坏死性胰腺炎（AHNP）大鼠实验动物模型,进行了毛冬青总皂苷（高、低剂量）的治疗。观察了5组（假手术对照组、AHNP模型组、毛冬青总皂苷高剂量组、毛冬青总皂苷低剂量组、尼尔雌醇组、）大鼠股骨中Cu、Mn、Fe、Zn、Pb、Mg和ca等微量元素的变化。结果统计学结果显示与AHNP模型组比较,毛冬青总皂苷能提高AHNP大鼠骨质中cu、Fe、Mn、Mg、Ca等元素的含量,尼尔雌醇组中的zn含量提高,毛冬青总皂苷组中的zn含量反而下降;尼尔雌醇组与毛冬青总皂苷组中Pb含量下降明显。结论说明毛冬青总皂苷的治疗作用并不是单一的,可以认为中药毛冬青总皂苷是通过发挥对人体整体的调节作用来调节骨骼中微量元素的变化,改变骨质的代谢情况,促进骨密度的提高。     

毛冬青总皂苷对大鼠脑缺血再灌注损伤的保护作用及血液微量元素影响

目的研究毛冬青总皂苷对脑缺血再灌注损伤的保护作用,并初步探讨其血液微量元素的影响。方法动物随机分为假手术组、模型组、毛冬青总皂苷(高、中、低)剂量组及阳性药物对照组,运用大鼠大脑中动脉栓塞,制作脑缺血再灌注损伤模型,缺血10 min后,给药组及阳性药物组于舌下静脉给予高、中、低剂量的毛冬青总皂苷及假手术组、模型组给予等体积的溶剂。缺血60 min再灌注24 h后,每组取8只大鼠断头取脑,TTC染色,测定脑梗死体积;取血,测定血液中3种微量元素Ca、Zn、Cu的含量。结果毛冬青总皂苷组与模型组相比,毛冬青总皂苷治疗组脑梗死体积减小,病理变化较轻;模型组与假手术组比较血液中Ca、Cu含量增加明显有统计学意义,Zn含量明显降低与假手术组比较有统计学意义(P0.05),毛冬青高、中、低剂量组与模型组比较Ca、Cu含量明显降低,Zn含量明显升高,而且呈明显的量效关系,与模型组比较有统计学意义(P0.05)。结论毛冬青总皂苷对脑缺血再灌注损伤具有一定的保护作用,其保护机制与毛冬青总皂苷抗氧化作用及增强氧自由基的清除有关。     

毛冬青化学成分的研究II: 毛冬青皂苷甲的化学结构

从毛冬青的根皮中分得一种新的三萜皂苷,命名为毛冬青皂苷甲,经^1H NMR、^1^3C NMR、MS、IR、UV和化学转化产物的研究,推定它为3β,19α-二羟基-乌索-12-烯-24,28-二羧酸-28-β-D-葡萄吡喃糖基酯.     

毛冬青化学成分的研究 Ⅱ.毛冬青皂苷甲的化学结构

从毛冬青的根皮中分得一种新的三萜皂苷,命名为毛冬青皂苷甲,经~1HNMR、~(13)CNMR、MS、IR、UV和化学转化产物的研究,推定它为3β,19α-二羟基-乌索-12-烯-24,28-二羧酸-28-β-D-葡萄吡喃糖基酯(1)。     

毛冬青甙甲的结构研究(Ⅰ)

从毛冬青根分离出一种具有强心作用的新的三萜甙--毛冬青甙甲(I)。分析证明(Ⅰ)为毛冬青酸(Ⅱ)的β-木糖甙。(Ⅱ)是新的三萜酸,经化学反应和波谱分析推定其结构为18-去氢-20-表乌苏酸。X射线单晶衍射分析确证了毛冬青酸的结构及其立体化学。     

毛冬青酸结构的研究

化合物毛冬青酸是从植物毛冬青(llex publesccns Hook et Arn)的根部分离出的具有强心作用的毛冬青甙甲的甙元。它是一个结构未知的新的三萜酸,C_(10)H_(46)O_3,m.p.288～9℃,[a]_D 437(C0.80 DMF)。     

高效液相色谱-质谱法快速鉴定复方毛冬青冲剂中三萜皂苷活性成分

建立了高效液相色谱-质谱法(HPLC-MS)快速鉴定复方毛冬青冲剂中三萜皂苷活性成分的方法.以甲醇为萃取剂超声萃取复方毛冬青冲剂30 min.采用高效液相色谱-离子阱质谱(HPLC-IT-MS)和高效液相色谱-飞行时间质谱(HPLC-TOF-MS)对萃取液进行分析,选用Agilent Zorbax Eclipse XDB C18色谱柱(250 mm×4.6 mm, 5 μm),以水(含0.1 %甲酸)-乙腈为流动相进行梯度洗脱,柱后流出液采用电喷雾离子阱质谱(ESI-IT-MS)和电喷雾飞行时间质谱(ESI-TOF-MS)的正、负离子模式进行检测.检测结果经离子阱一级质谱(IT-MS1)、离子阱二级质谱(IT-MS2)和分析时间质谱(TOF-MS)信息分析,并与相关文献报道进行比较,鉴定出1种三萜酸和8种三萜皂苷成分,并推测了其它3种可能的三萜皂苷化学成分,通过对照品对比分析,三萜酸确证为Ilexgenin A,其中一种三萜皂苷确证为Ilexsaponin A1.本方法无需对照品即可快速有效地鉴定出复方毛冬青冲剂中的三萜皂苷活性成分,为建立冲剂的质量标准提供了依据.     

加速溶剂萃取/HPLC-MS对毛冬青药材中Ilexgenin A与Ilexsaponin A1含量的测定

建立了加速溶剂萃取/高效液相色谱-质谱法(ASE/HPLC-MS)测定毛冬青药材中活性成分ilexgenin A和ilexsaponin A1含量的方法.采用ASE萃取毛冬青药材中的活性成分ilexgenin A和ilexsaponin A1,萃取溶剂为甲醇,萃取温度100 ℃,压力1.0×107 Pa,静态萃取模式,循环3次,每次萃取10 min.采用HPLC-MS对萃取液中ilexgenin A和ilexsaponin A1进行定量分析,色谱柱选用Dikma Diamonsil C18(4.6 mm×250 mm,5 μm),以水和乙腈为流动相进行梯度洗脱,大气压化学电离源(APCI),定量离子m/z 485.ilexgenin A和ilexsaponin A1的线性范围为1.0 ～200.0 mg/L,对毛冬青试样的定量下限分别为19.5和35.0 μg/g,RSD分别为6.7%和7.8%,回收率分别为87% ～96%和93% ～102%.将建立的方法用于分析11个不同产地的毛冬青药材,ilexgenin A含量为0.42 ～6.3 mg/g,ilexsaponin A1含量为0.80 ～8.9 mg/g.     

皂苷、皂苷元分子聚集相行为的原子力显微镜研究

用原子力显微镜检测了不同浓度下皂苷和皂苷元的分子聚集相行为.实验表明,当浓度为1.0×10-5 mol/L时,皂苷形成分散较均匀的小片段结构,表现为皂苷分子的聚集体结构;而皂苷元由多个分子连接形成聚集体结构,与皂苷相比高度起伏较低,链的长度较长.浓度为1.0×10-4 mol/L时,皂苷出现了不规则片层与小片段共存结构;皂苷元却形成多孔的网状结构.当浓度增大到1.0×10-3 mol/L时,皂苷小分子紧密聚集、分布在云母表面;皂苷元则形成紧密聚集的大片层多孔结构.结构分析表明,分子官能团的属性对于皂苷和皂苷元分子形成的不同结构起到了关键作用,分子骨架中的糖链阻碍皂苷形成大片层结构,而皂苷元由于分子骨架中羟基间氢键相连接,易于形成大的片层结构.     

黄褐毛忍冬中主皂苷成分的结构解析

报道了黄褐毛忍冬中的两个皂苷主成分, 其中化合物1为新化合物, 并对另一个含量最高的皂苷结构进行了修正.     

计算机模拟取样确定标准物质的最小取样量

本文提出用计算机模拟取样对不同的取样量重复进行测试多次,统计其检测结果的标准偏差,做出标准偏差s对取样量m的拟合曲线,再计算最小取样量。设计的模式是一颗一颗地取样,这样不存在取样操作及测试过程带来的误差,操作是可行的,结果是可靠的。计算机运算速度快,参数转换方便,也可以取毫克甚至亚毫克样进行实验。只要有足够的岩矿鉴定的资料,可以模拟不同状态下的样品取样过程。     

Optimisation design of cylindrical containers for improving the detection efficiency of a high-purity germanium detector using the LabSOCS

The LabSOCS software was used to optimise the geometric dimensions of cylindrical containers and improve the detection efficiency of a high-purity germanium detector for the measurement of environmental radioactivity samples. The optimum ratio of diameter and height for different sample volumes were determined. In addition, the degrees of influence of the sample volume and density when the amount of sample was fixed were compared. Results show that the effect of sample volume on detection efficiency was significantly greater than that of sample density for a given sample amount.     

Portable single-sided NMR measurements at variable temperatures: Implementation of a thermo-controlled device and application to the heating of bread dough

A temperature control unit was implemented to vary the temperature of samples studied on a commercial Mobile Universal Surface Explorer nuclear magnetic resonance (MOUSE-NMR) apparatus. The device was miniaturized to fit the maximum MOUSE sampling depth (25 mm). It was constituted by a sample holder sandwiched between two heat exchangers placed below and above the sample. Air was chosen as the fluid to control the temperature at the bottom of the sample, at the interface between the NMR probe and the sample holder, in order to gain space. The upper surface of the sample was regulated by the circulation of water inside a second heat exchanger placed above the sample holder. The feasibility of using such a device was demonstrated first on pure water and then on several samples of bread dough with different water contents. For this, T1 relaxation times were measured at various temperatures and depths and were then compared with those acquired with a conventional compact closed-magnet spectrometer. Discussion of results was based on biochemical transformations in bread dough (starch gelatinization and gluten heat denaturation). It was demonstrated that, within a certain water level range, and because of the low magnetic field strength of the MOUSE, a linear relationship could be established between T1 relaxation times and the local temperature in the dough sample.     

Application of Hadamard transformation to MEKC

The Hadamard transform (HT) technique, which permits the S/N in CE to be improved, was applied to MEKC. Multiple sample injection of fluorescent analytes according to a Hadamard code sequence was performed using an optically gated sample injection technique, in which a sample plug was produced based on photodegradation by irradiation with an intense laser beam. The capillary and reservoirs were filled with a sample solution containing buffer components and SDS as a pseudostationary phase. A preliminary study confirmed that fluorescein ion could be photobleached in the presence of SDS. The optically gated sample injection technique was then applied to multiple sample injection, based on a Hadamard matrix. The S/N in the electropherogram obtained by HT-MEKC was improved substantially compared to that obtained by a single injection method. When the technique was applied to the separation of several amino acids labeled with FITC, the S/N ratio for each amino acid was enhanced, without any evidence of degradation in separation resolution. Moreover, HT-MEKC was applied to the analysis of amino acids contained in a Japanese beverage, resulting in improved S/Ns for the amino acids.     

Investigation of the mechanism of pH-mediated stacking of anions for the analysis of physiological samples by capillary electrophoresis

Capillary electrophoresis has been widely used for the analysis of physiological samples such as plasma and microdialysate. However, sample destacking can occur during the analysis of these high-ionic strength samples, resulting in poor separation efficiency and reduced sensitivity. A technique termed pH-mediated stacking of anions (base stacking) has previously been developed to analyze microdialysate samples and achieve on-line preconcentration of analytes by following sample injection with an injection of sodium hydroxide. In this work, the mechanism of base stacking was investigated. Peak efficiency was shown to be a function of background electrolyte and sample ionic strength. Analytes representing several classes of compounds with a wide range of mobilities were used to study the effects of multiple parameters on sample stacking. The length of hydroxide injection required for stacking was shown to be dependent on analyte mobility and the type of amine background electrolyte used. Combinations of electrokinetic and hydrodynamic injections of sample and hydroxide were examined and it was concluded that although stacking could be achieved with several injection modes, electrokinetic injection of both sample and hydroxide was most effective for sample stacking. The mechanism of pH-mediated stacking for each of these modes is presented.     

Gamma-ray yield dependence on bulk density and moisture content of a sample of a PGNAA setup: A Monte Carlo study

Monte Carlo calculations were carried out to study the dependence of γ-ray yield on the bulk density and moisture content of a sample in a thermal-neutron capture-based prompt gamma neutron activation analysis (PGNAA) setup. The results of the study showed a strong dependence of the γ-ray yield upon the sample bulk density. An order of magnitude increase in yield of 1.94 and 6.42 MeV prompt γ-rays from calcium in a Portland cement sample was observed for a corresponding order of magnitude increase in the sample bulk density. On the contrary the γ-ray yield has a weak dependence on sample moisture content and an increase of only 20% in yield of 1.94 and 6.42 MeV prompt γ-rays from calcium in the Portland cement sample was observed for an order of magnitude increase in the moisture content of the Portland cement sample. A similar effect of moisture content has been observed on the yield of 1.167 MeV prompt γ-rays from chlorine contaminants in Portland cement samples. For an order of magnitude increase in the moisture content of the sample, a 7 to 12% increase in the yield of the 1.167 MeV chlorine γ-ray was observed for the Portland cement samples containing 1 to 5 wt.% chlorine contaminants. This study has shown that effects of sample moisture content on prompt γ-ray yield from constituents of a Portland cement sample are insignificant in a thermal-neutrons capture-based PGNAA setup.     

New aspects of ta application for studies of Ca-Mg carbonate minerals exemplified by upper permian rocks

The paper discusses the influence of variable experimental conditions on the thermal decomposition of carbonate minerals. This study was based on Ca-Mg carbonate minerals from Upper Permian dolomite and zuber rocks as well as on calcite and magnesite samples from geological formations of various ages. X-ray diffraction was applied for comparative purposes. Experimental conditions were chosen based on the authors' experience related to studies of both fossil and contemporary organic matters as well as various materials of geological provenience. Since the main factor in thermal analysis of carbonates is the appropriate choice of experimental conditions for outflow of gaseous reaction products, the thermal analyses were carried out with various sample holders, various sample masses and varied thickness of sample layers in holders, using also a dynamic atmosphere. The results obtained indicated that different experimental conditions produced extremely different TA data, e.g. the traditional analysis in crucible sample holders with a thick sample layer (great sample mass) showed well expressed double thermal effects of dolomite. For thin sample layer both peaks of thermal decomposition of carbonate components occurred in very close or almost identical temperatures. The presented results enabled to devise a detailed procedure referring to the choice of experimental conditions and interpretation possibilities as well as to recommend specific TA instruments design and sample holders types. This revised version was published online in July 2006 with corrections to the Cover Date.     

Effect of NaOH on large-volume sample stacking of haloacetic acids in capillary zone electrophoresis with a low-pH buffer

Large-volume sample stacking (LVSS) is an effective on-capillary sample concentration method in capillary zone electrophoresis, which can be applied to the sample in a low-conductivity matrix. NaOH solution is commonly used to back-extract acidic compounds from organic solvent in sample pretreatment. The effect of NaOH as sample matrix on LVSS of haloacetic acids was investigated in this study. It was found that the presence of NaOH in sample did not compromise, but rather help the sample stacking performance if a low pH background electrolyte (BGE) was used. The sensitivity enhancement factor was higher than the case when sample was dissolved in pure water or diluted BGE. Compared with conventional injection (0.4% capillary volume), 97-120-fold sensitivity enhancement in terms of peak height was obtained without deterioration of separation with an injection amount equal to 20% of the capillary volume. This method was applied to determine haloacetic acids in tap water by combination with liquid-liquid extraction and back-extraction into NaOH solution. Limits of detection at sub-ppb levels were obtained for real samples with direct UV detection.     

钝化与过钝化状态下304不锈钢的点蚀行为研究

为了进一步了解不锈钢钝化膜与过钝化膜的性质,本文对比研究了在不同电位下极化处理后304不锈钢样品的点蚀及表面膜性质,发现空白对照组样品的点蚀电位和1.1 V过钝化处理后样品的点蚀电位相近,而0.5 V钝化处理后样品的点蚀电位较高. 扫描Kelvin探针（SKP）实验结果也验证了这一现象. 扫描电子显微镜（SEM）结果显示,空白对照组样品表面只呈现一般样品抛光后形貌;0.5 V钝化处理后的样品表面被颗粒状钝化膜所覆盖,该膜层决定了样品具有较好的耐蚀性;而1.1 V过钝化处理后的样品表面出现裂缝,导致不锈钢基体继续发生严重的局部腐蚀,可能成为过钝化膜保护性变差的主要原因.     

The effect of sample weight in thermogravimetric analysis of low viscosity polypropylene in air atmosphere

Low viscosity polypropylene is a new group of homopolymers for the manufacture of melt-blown nonwovens. The thermooxidative degradation of isotactic polypropylene was studied. Experiments using varied sample size and flow rates were undertaken to determine possible effects of these experimental parameters on the low viscosity thermo-oxidation process. It was found that the results of thermogravimetric analysis (temperature of 50%) of low viscosity polypropylene samples very strongly depend on the weight of the sample. The influence of gas flow conditions, sample pan geometry and sample melt flow rates parameters on the results of thermogravimetric analysis has not been observed.