Portable single-sided NMR measurements at variable temperatures: Implementation of a thermo-controlled device and application to the heating of bread dough

A temperature control unit was implemented to vary the temperature of samples studied on a commercial Mobile Universal Surface Explorer nuclear magnetic resonance (MOUSE-NMR) apparatus. The device was miniaturized to fit the maximum MOUSE sampling depth (25 mm). It was constituted by a sample holder sandwiched between two heat exchangers placed below and above the sample. Air was chosen as the fluid to control the temperature at the bottom of the sample, at the interface between the NMR probe and the sample holder, in order to gain space. The upper surface of the sample was regulated by the circulation of water inside a second heat exchanger placed above the sample holder. The feasibility of using such a device was demonstrated first on pure water and then on several samples of bread dough with different water contents. For this, T1 relaxation times were measured at various temperatures and depths and were then compared with those acquired with a conventional compact closed-magnet spectrometer. Discussion of results was based on biochemical transformations in bread dough (starch gelatinization and gluten heat denaturation). It was demonstrated that, within a certain water level range, and because of the low magnetic field strength of the MOUSE, a linear relationship could be established between T1 relaxation times and the local temperature in the dough sample.     

Enhancing signal-to-noise ratio and resolution in low-field NMR relaxation measurements using post-acquisition digital filters

The traditional way to enhance signal-to-noise ratio (SNR) of nuclear magnetic resonance (NMR) signals is to increase the number of scans. However, this procedure increases the measuring time that can be prohibitive for some applications. Therefore, we have tested the use of several post-acquisition digital filters to enhance SNR up to one order of magnitude in time domain NMR (TD-NMR) relaxation measurements. The procedures were studied using continuous wave free precession (CWFP-T₁) signals, acquired with very low flip angles that contain six times more noise than the Carr–Purcell–Meiboom–Gill (CPMG) signal of the same sample and experimental time. Linear (LI) and logarithmic (LO) data compression, low-pass infinity impulse response (LP), Savitzky–Golay (SG), and wavelet transform (WA) post-acquisition filters enhanced the SNR of the CWFP-T₁ signals by at least six times. The best filters were LO, SG, and WA that have high enhancement in SNR without significant distortions in the ILT relaxation distribution data. Therefore, it was demonstrated that these post-acquisition digital filters could be a useful way to denoise CWFP-T₁, as well as CPMG noisy signals, and consequently reducing the experimental time. It was also demonstrated that filtered CWFP-T₁ method has the potential to be a rapid and nondestructive method to measure fat content in beef and certainly in other meat samples.     

“(Diphosphine)Nickel”‐Catalyzed Negishi Cross‐Coupling: An Experimental and Theoretical Study

The use of a strongly donating “(bis‐dialkylphosphine)Ni” fragment promotes the catalytic coupling of a large range of ArCl and ArZnCl derivatives under mild conditions. Stoichiometric mechanistic investigations and DFT calculations prove that a Ni⁰/Ni^II cycle is operative in this system.     

Effect of matrices and additives on phosphorylated and ketodeoxyoctonic acid lipids A analysis by matrix‐assisted laser desorption ionization‐mass spectrometry

Lipid A is a major compound of the outer membrane of gram‐negative bacteria and is a key factor of bacterial virulence. As lipid A's structure differs among bacterial species and varies between strains of the same species, knowing its modifications is essential to understand its implications in the infectious process. To analyze these lipids, matrix‐assisted laser desorption ionization‐mass spectrometry (MALDI‐MS) is a well‐suited method that is fast and efficient. However, there are limitations with the matrix and additives used, such as the suppression of signal or prompt fragmentations that could give a false overview of lipid A composition in biological samples. For a comprehensive analysis of the entire lipid A species present in a sample, we tested 16 matrices and 11 additives on two commercial lipids A. The first commercial one contains single phosphorylation group, and the second contains two phosphorylation and two ketodeoxyoctonic acid (KDO) groups. The lipid A containing KDO groups was essentially detected by the 3‐hydroxypicolinic acid (3‐HPA) matrix, whereas the monophosphorylated lipid A could be detected by 13 matrices out of the 16. We also demonstrated that the signal of diphosphorylated lipid A can be enhanced with the use of additives in the matrix. Our study indicated that the best conditions to obtain a clear signal of both lipids A without prompt fragmentation was the use of 3‐HPA with 10mM trifluoroacetic acid (TFA).     

CoI-Catalyzed Barbier Reactions of Aromatic Halides with Aromatic Aldehydes and Imines

The reductive Barbier coupling of aromatic halides and electrophiles has been achieved using a CoBr₂/1,10-phenanthroline catalytic system and over stoichiometric amounts of zinc. The reaction displayed a broad scope of substrates, including (hetero)aryl chlorides as pro-nucleophiles and aldehydes or imines as electrophiles, leading to diarylmethanols and diarylmethylamines in moderate to excellent yields, respectively.     

Online large volume sample staking preconcentration and separation of enantiomeric GHRH analogs by capillary electrophoresis

A capillary electrophoresis method is proposed to analyze the four most well-known growth hormone–releasing hormone (GHRH) analogs that are misused by athletes. Dimethyl-β-cyclodextrin used as a chiral selector allowed, for the first time, the separation of those basic peptide analogs, including enantiopeptides (sermorelin and CJC-1293) that differ by the chirality of only one amino acid. To increase the method sensitivity, electrokinetic preconcentration methods have been investigated. The large volume sample stacking with polarity switching (PS-LVSS) method with an injected sample volume corresponding to 80% of the capillary one was found superior to the sweeping in terms of signal enhancement factor (SEF). Acid and organic solvent addition to the sample (0.1 mM phosphoric acid with 30% methanol) led to a twofold signal improvement, when compared to water as a matrix. We increased capillary dimensions to provide a signal enhancement through the injection of a larger sample volume. Finally, using a combination of the optimized PS-LVSS preconcentration with the chiral capillary zone electrophoresis (CZE), the GHRH analogs were separated and limits of detection between 75 and 200 ng/mL were reached. This method was successfully applied to urine after a desalting step. An optimized C18 SPE was used for that purpose in order to provide low sample conductivity (<130 µS/cm) and preserve the efficiency of LVSS preconcentration. SEF of 640 was obtained with desalted urine spiked with sermorelin by comparison to the CZE (without preconcentration) method.     

Identification and separation of saxitoxins using hydrophilic interaction liquid chromatography coupled to traveling wave ion mobility‐mass spectrometry

The aim of this work was to develop a reliable and efficient analytical method to characterise and differentiate saxitoxin analogues (STX), including sulphated (gonyautoxins, GTX) and non‐sulphated analogues. For this purpose, hydrophilic interaction liquid chromatography (HILIC) was used to separate sulphated analogues. We also resorted to ion mobility spectrometry to differentiate the STX analogues because this technique adds a new dimension of separation based on ion gas phase conformation. Positive and negative ionisation modes were used for gonyautoxins while positive ionisation mode was used for non‐sulphated analogues. Subsequently, the coupling of these three complementary techniques, HILIC‐IM‐MS, permitted the separation and identification of STX analogues; isomer differentiation was achieved in HILIC dimension while non‐sulphated analogues were separated in the IM‐MS dimension. Additional structural characteristics concerning the conformation of STXs could be obtained using IM‐MS measurements. Thus, the collision cross sections (CCS) of STXs are reported for the first time in the positive ionisation mode. These experimental CCSs correlated well with the calculated CCS values using the trajectory method. Copyright © 2015 John Wiley & Sons, Ltd.     

A Ca2+‐, Mg2+‐, and Zn2+‐Based Dendritic Contractile Nanodevice with Two pH‐Dependent Motional Functions

A contractile dendritic motional device is reported where metal ions with biological importance—Ca²⁺ (the main regulatory and signaling species of the natural muscles), Mg²⁺, and Zn²⁺—initiate two kinds of motional functions. The first motional function is the metal‐ion‐induced contraction of a linear strand into a Z‐shaped dinuclear complex, and the second one is the change of the height of Z‐shaped complexes via transmetalation. By means of the pH‐dependent counterligand tren, the two motional features of the machine can depend on alternate additions of acid and base. An optical response is associated with the conversion of the linear form (which is yellow) into the metalated Z‐shaped one (which is red).     

Metal-acetylide addition to tetracyanoethylene

Two push-pull chromophores that have shown utility in the field of molecular electronics and non-linear optics are DDMEBT (1, 2-(4-dimethylamino)phenyl)-3-((4-(dimethylamino)phenyl)ethynyl)buta-1,3-diene-1,1,4,4-tetracarbonitrile) and TDMEE (2, 4-(4-dimethylamino)phenyl)but-1-en-3-yne-1,1,2-tricarbonitrile). Unfortunately, the methods reported for their synthesis give variable yields, use toxic solvents, and only provide small amounts of material. We report improved synthetic protocols, providing access to larger quantities of material. By investigating multiple metal-acetylides of 4-ethynyl-N,N-dimethylaniline and their subsequent addition to TCNE, we obtained various products depending on the identity of the metal ion. This led to the simple synthesis of push-pull chromophoric compounds.