ICP–AES法测定稀土硅铁球化剂和孕育剂中钙、镁、铝、锰、镧、铈

建立了电感耦合等离子体原子发射光谱法(ICP–AES)测定稀土硅铁球化剂和孕育剂中Ca,Mg,Al,Mn,La,Ce等元素含量的方法。通过基体匹配消除了铁基体的干扰,Ca,Mg,Al,Mn,La,Ce的分析谱线分别为317.933,279.553,394.401,257.610,333.749,456.236 nm。各元素标准曲线的线性相关系数均在0.999以上,检出限在0.000 1%~0.000 4%之间。方法的加标回收率为99.4%~102.8%,测定结果的相对标准偏差均小于3%(n=11)。用该方法测定标准样品,测定结果与认证值相吻合。该法适用于稀土硅铁球化剂和孕育剂中钙、镁、铝、锰、镧、铈的测定。     

电感耦合等离子体光谱法(ICP-AES)测定银精矿中铜、铅、锌、砷、镉、钙、镁、锰含量

针对银精矿样品复杂,难消解的特点,研究了不同酸溶法和碱熔法对样品的消解情况,建立了硝酸,盐酸,氢氟酸,高氯酸消解银精矿的方法。根据元素灵敏度和抗干扰性,选定各元素的测定波长。通过酸溶样和碱熔样测定结果比对,验证了方法准确性。建立了四酸消解-电感耦合等离子体光谱法测定银精矿中铜、铅、锌、砷、镉、钙、镁、锰含量的方法,元素的线性相关系数均在0.9999以上。通过共存元素干扰实验,确定了银精矿中高含量元素(铜、铅、锌、铁、锑、铋等)对测定元素结果没有影响。方法检出限：Cu 0.0063 mg/L, Pb 0.0159 mg/L ,Zn 0.0090 mg/L,As 0.0192 mg/L, Cd 0.0093 mg/L ,Ca 0.0084 mg/L, Mg 0.0075 mg/L, Mn 0.0081 mg/L。测定下限：Cu 0.0105mg/L,Pb 0.0265 mg/L, Zn 0.0150 mg/L, As 0.0320 mg/L, Cd 0.0155 mg/L, Ca 0.0140 mg/L, Mg 0.0125 mg/L,Mn 0.0135 mg/L。3个样品的相对标准偏差在0.87%~3.56%之间,加标回收率在95.00%~103.56%之间。方法流程短,操作简单,快速,灵敏度和再现性高,结果准确可靠,可以满足银精矿中铜、铅、锌、砷、镉、钙、镁、锰含量的测定。     

EFFECT OF STRESS-INDUCED REACTIONS ON MORPHOLOGICAL STRUCTURE AND PROCESSABILITY OF PVC DURING PAN-MILLING

The effect of pan-milling on morphological structure, processability and properties of PVC was studied through SEM, FTIR, granulometer, GPC and mechanical properties test in the hope of gaining ease in operation, needless of plasticizers, a clean and efficient route for improving the processability of PVC through stress-induced reactions,fulfilling the idea of “plasticizing PVC by itself”. The experimental results show that during pan-milling at ambient temperature, within 2-3 min, the microcrystalline structure of PVC becomes indistinct, the grain size of PVC is reducedfrom 130-160 μm to 1-50 μm the molecular weight of PVC is slightly decreased, the variation of molecular weight distribution is indistinct, the plasticizing time and torque at balance drop a great deal from 71-132 s to 31-33 s and from 18.2-22.1 Nm to 14.7-18.4 Nm, respectively, the processability of PVC is markedly improved, and the mechanical properties get enhanced too.     

三唑类药物研究新进展

三唑类化合物作为药物广泛应用于临床,是目前药物研究开发的重点领域之一．越来越多的高活性、低毒性、不良反应少、多药耐药性小、生物利用率高、药代动力学性质好、药物靶向性强、给药方式多样化、广谱、高疗效的三唑类化合物作为候选药物或药物用于临床医治多种疾病,显示出了三唑类化合物在医药领域的巨大开发价值和潜在的宽广应用．本文结合自己的工作,参考国内外近五年文献系统地综述了三唑类化合物作为药物在整个医药领域的研究与开发近况,包括抗真菌、抗细菌、抗结核、抗癌、抗病毒、抗炎镇痛、抗惊厥等,并展望其发展趋势与前景．希望该评论有助于为高活性低毒性三唑类医药合理设计提供新思路．     

生物光化学

生物光化学研究光在动植物体内所引起的生化现象。例如:经过各种不同波长的光辐照后的生命现象,生长规律,某些生理和病理过程,疾病的产生和治疗机理,细胞的辐射损伤和自然防御,以及光合色素在生物进化中的作用等。本文就光引起的现象:视觉、生物钟(光周期性)、植物的光合作用、辐射损伤及其修复、牛皮癣的治疗、新生儿黄疸病的治疗机理,以及光合色素——藻胆蛋白等七种现象,做了综述性的介绍。     

半导体光催化研究进展与展望

评述了目前半导体光催化在国内外的研究概况,并对存在的问题和未来的发展动向进行简要分析.列举了近30年来关于光催化研究的部分成果,内容涉及光催化剂的制备(包括新催化剂的开发, TiO2、 ZnO、 CdS等光催化剂的各种改性或修饰)、光催化作用机理研究、光催化技术的工程化、光催化技术的各种应用研究和产品开发等等从基础到应用研究的各个方面.总体上来看,半导体光催化基本上是一个没有选择性的化学过程,所以再进行大量的不同反应物的光催化活性的评价研究意义已不是很显著,认为未来的半导体光催化研究应该集中在机理的深刻认识、光响应范围宽和量子效率高的催化剂制备、半导体光催化技术工程化及新型光催化产品开发方面.     

液体弹珠：制备策略、物理性质及应用探索

Liquid marbles (LMs) are liquid droplets coated with a layer of lyophobic particles at the air-liquid interface. Since the pioneering work by Aussillous et al. in 2001, LMs have attracted significant attention owing to their facile fabrication, flexibility in the choice of the constituent particles and liquids, intriguing properties such as non-wetting and non-adhesive nature, satisfactory elasticity and stability, as well as promising applications in microfluidics, sensors, controlled release, and microreactors. The classical strategy for the preparation of LMs involves rolling a small volume of a droplet on a lyophobic powder bed for complete encapsulation of the liquid by the particles. In addition, various innovative methods, including electrostatic and coalescent approaches, have been developed for preparing special LMs with a complicated structure or morphology. Diverse materials such as water, surfactant solutions, liquid metals, reagents, blood, and even viscous adhesives have been employed as the internal liquid for the fabrication of LMs. Theoretically, any particulates such as lycopodium, polytetrafluoroethylene, Fe₃O₄, SiO₂, and graphite grains can be employed as the outer coating, but they are usually required to be lyophobic with sizes of less than hundreds of microns. The unique structure of the particle-covered droplet and the dual solid-liquid characteristics endow LMs with some unique and interesting properties, especially the non-wetting and non-adhesive nature. As the lyophobic coating particles restrain the internal liquid from contacting the substrate, LMs can move easily across either solid or liquid surfaces, neither wetting the substrate nor contaminating the internal liquid. An equally fascinating property of LMs is their satisfactory stability, which is necessary for most of their applications. The high stability of LMs stems from the protection of the coating powders and is embodied in both good mechanical stability (remaining intact after being released from a certain height or under a certain compression) and long lifetime (greatly suppressing the evaporation of the internal liquid). These extraordinary properties make LMs promising candidates for use in multitudinous fields, especially droplet microfluidics and microreactors. The potential application of LMs in microfluidics is ascribed to their non-wetting, non-adhesive nature and other features such as an ability to float on a liquid surface, coalescence, split, a small force of rolling friction, and response to external forces. Notably, LMs hold great promise for applications in microreactions, because they can create a confined reaction microenvironment, minimize reagent usage, facilitate unhindered gas exchange between the internal liquid medium and the surrounding environment, and allow the entry/exit of the reactants/products. We herein review the recent advances in LMs, such as manufacturing techniques, formation mechanisms, physical properties, and emerging applications. In particular, much attention is paid to the factors affecting the stability of LMs and the potential strategies to increase their stability. Moreover, this review discusses the challenges in the future development of LMs, suggests several possible ways of addressing these challenges, and forecasts the future development directions. We believe that this review can help researchers gain a better understanding of LMs and promote their further advances.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

THE DISTRIBUTION FUNCTION OF RESIDUE-RESIDUE CONTACTS IN PROTEIN MOLECULES

In protein molecules each residue has a different ability to form contacts.In this paper,we calculated the number of contacts per residue and investigated the distribution of residue-residue contacts from 495 globular protein molecules using Contacts of Structural Units(CSU)software.It was found that the probability P(n)of amino acid residues having n pairs of contacts in all contacts fits Gaussian distribution very well.The distribution function of residue-residue contacts can be expressed as:P(n)=P_0+aexp[-b(n-n_c)~2].In our calculation,P_0=-0.06,α=11.4,b=-0.04 and n_c=9.0.According to distribution function,we found that those hydrophobic(H)residues including Leu,Val,Ile,Met,Phe,Tyr,Cys,and Trp residues have large values of the most probable number of contact n_c,and hydrophilic(P)residues including Ala,Gly,Thr, His,Glu,Gln,Asp,Asn,Lys,Ser,Arg,and Pro residues have the small ones.We also compare with Fauchere-Pliska hydrophobicity scale(FPH)and the most probable number of contact n_c for 20 amino acid residues,and find that there exists a linear relationship between Fauchere-Pliska hydrophobicity scale(FPH)and the most probable number of contact n_c, and it is expressed as:n_c=a+b×FPH,here α=8.87,and b=1.15.It is important to further explain protein folding and its stability from residue-residue contacts.     

石墨烯纤维：制备、性能与应用

石墨烯纤维是一种由石墨烯片层紧密有序排列而成的一维宏观组装材料。通过合理的结构设计和可控制备,石墨烯纤维能够将石墨烯在微观尺度的优异性能有效传递至宏观尺度,展现出优异的力学、电学、热学等性能,从而应用于功能织物、传感、能源等领域。目前,石墨烯纤维主要通过湿法纺丝、限域水热组装等方法制备得到,其性能可以通过对材料体系和制备工艺的优化而进一步提升。本文首先介绍了石墨烯纤维的制备方法,然后详细阐述了石墨烯纤维的性能,讨论了其性能提升策略,并总结了石墨烯纤维的应用,最后对石墨烯纤维的未来发展、挑战和前景进行了展望。     

Effect of solvents on electro-spinnability of polystyrene solutions and morphological appearance of resulting electrospun polystyrene fibers

The effects of solvents and their properties on electro-spinnability of the as-prepared polystyrene (PS) solutions and the morphological appearance of the as-spun PS fibers were investigated qualitatively by means of a scanning electron microscope (SEM). The eighteen solvents used were benzene, t-butylacetate, carbontetrachloride, chlorobenzene, chloroform, cyclohexane, decahydronaphthalene (decalin), 1,2-dichloroethane, dimethylformamide (DMF), 1,4-dioxane, ethylacetate, ethylbenzene, hexane, methylethylketone (MEK), nitrobenzene, tetrahydrofuran (THF), 1,2,3,4-tetrahydronaphthalene (tetralin), and toluene. The PS solutions in 1,2-dichloroethane, DMF, ethylacetate, MEK, and THF could produce fibers with high enough productivity, while the PS solutions in benzene, cyclohexane, decalin, ethylbenzene, nitrobenzene, and tetralin were not spinnable. Qualitative observation of the results obtained suggested that the important factors determining the electro-spinnability of the as-prepared PS solutions are high enough values of both the dipole moment of the solvent and the conductivity of both the solvent and the resulting solutions, high enough boiling point of the solvent, not-so-high values of both the viscosity and the surface tension of the resulting solutions.     

Pharmacological Extracts and Molecules from Virola Species: Traditional Uses,Phytochemistry, and Biological Activity

Virola is the largest genus of Myristicaceae in America, comprising about 60 species of medium-sized trees geographically spread from Mexico to southern Brazil. The plant species of this genus have been widely used in folk medicine for the treatment of several ailments, such as rheumatic pain, bronchial asthma, tumors in the joints, intestinal worms, halitosis, ulcers, and multiple infections, due to their pharmacological activity. This review presents an updated and comprehensive summary of Virola species, particularly their ethnomedicinal uses, phytochemistry, and biological activity, to support the safe medicinal use of plant extracts and provide guidance for future research. The Virola spp.’s ethnopharmacology, including in the treatment of stomach pain and gastric ulcers, as well as antimicrobial and tryponosomicidal activities, is attributable to the presence of a myriad of phytoconstituents, such as flavonoids, tannins, phenolic acids, lignans, arylalkanones, and sitosterol. Hence, such species yield potential leads or molecular scaffolds for the development of new pharmaceutical formulations, encouraging the elucidation of not-yet-understood action mechanisms and ascertaining their safety for humans.     

超分子相互作用主导的纳米药物成核

纳米沉淀法是目前制备纳米药物的主要途径, 是指通过向药物的良溶剂中引入不良溶剂产生过饱和体系, 进而形成纳米尺度药物颗粒的方法. 该方法操控灵活, 能够大范围地选择药物分子、 溶剂、 载体、 表面活性剂及其它赋形剂, 实现对纳米药物成核及生长过程的调控. π-π堆积和疏水相互作用等分子间弱相互作用能够主导纳米药物成核, 从而用于制备高生物安全性的无载体纳米药物(CFNs). 目前超分子自组装在成核过程中的具体作用、 协同效应及调控方法尚缺少归纳总结. 根据纳米沉淀法的成核理论, 本文对超分子相互作用在成核过程中的重要贡献进行了诠释; 基于目前单药自组装CFNs的进展, 对多药共组装CFNs的优势进行了强调; 并将超分子相互作用主导成核的概念拓展到通过金属离子螯合形成的CFNs. 从理论上阐明了超分子相互作用在纳米药物成核过程中的主导作用, 将极大促进以高生物安全、 多功能及以联合治疗为标志的下一代CFNs的发展.     

Simultaneous determination of sulfoxaflor in 14 daily foods using LC-MS/MS

Sulfoxa?or residues in 14 daily foods, including rice, sorghum, chilli, cucumber, white pear, apple, egg, beef brisket, chicken breast, fish, pork liver, milk, pine nut and honey, were simultaneously determined using a modified QuEChERS and LC–MS/MS method. These foods were classified into three categories to be purified. A combination of 25 mg of octadecylsilane (C18) + 25 mg of primary and secondary amine (PSA) + 50 mg of graphitised carbon black (GCB) + 150 mg of MgSO₄ was used to purify the rice, sorghum, honey, apple and white pear. A combination of 25 mg of C18 + 50 mg of PSA + 50 mg of GCB + 150 mg of MgSO₄ was used to purify the chilli and cucumber. A combination of 50 mg of C18 + 25 mg of PSA + 50 mg of GCB + 150 mg of MgSO₄ was used to purify the pine nuts, egg, beef brisket, chicken breast, fish, pork liver and milk. The linearity coefficient values were greater than 0.9975. The limit of detection and limit of quantification were in the ranges of 0.7?1.8 and 2.0?5.0 μg kg^?1, respectively. Average recoveries of the sulfoxa?or at the 14 food matrices at spiking levels of 5.0, 10 and 50 μg kg^?1 ranged from 74.0% to 100.8%, and the relative standard deviation ranged from 2.2% to 11.2%. This is a simple and rapid method for the determination of sulfoxa?or residues in various kinds of daily foods.     

Solubilities of 1,2,3-trimethylbenzene and 1,2,4-trimethylbenzene and 1,3,5-trimethylbenzene in t-butyl alcohol+water mixtures and hydrophobic interaction

The solubilities of 1,2,3- trimethylbenzene, 1,2,4-trimethylbenzene and 1,3,5-trimethylbenzene in mixed solvents of t-butyl alcohol (TBA) and water at 283.15, 288.15, 293.15 and 298.15 K have been determined by spectrophotometry. The mole fractions of TBA [x(TBA)] in the mixed solvent are 0.000, 0.010, 0.020, 0.030, 0.040, 0.045, 0.050, 0.060, 0.080 and 0. 1000. The Gibbs energies of hydrophobie interaction (HI) for the aggregating process of three methane molecules with one benene molecule in the mixed solvent are studied, and the effect of solvent structure and solute aggregating state on the strength of HI is discussed.     

Synthesis and conversions of metallocycles. XII.13C NMR spectra of tri- and tetracyclic organoaluminum compounds with a bridge structure

The¹³C NMR spectra of a new class of tri- and tetracyclic organoaluminum and organosulfur bridge-type compounds, containing five-membered heterocycles with anexo-orientation, are discussed. The assignment of the signals and determination of the isomerism of the compounds studied were performed using the spectra of their hydrocarbon analogs, additive calculations, and an analysis of the spectra of products of deuteration and hydrolysis of organoaluminum compounds.For previous communication, see [1].Institute of Organic Chemistry, Urals Branch, Russian Academy of Sciences, 450054 Ufa, Bashkortostan, Russia. Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 12, pp. 2742–2750, December, 1992.     

甘油催化氢解制备精细化学品的研究进展

随着生物柴油产业的快速发展,作为副产物的甘油大量过剩,因而有效利用甘油既能促进生物柴油产业的良性发展,又能节约大量石油资源。通过甘油催化氢解的方式来制备高附加值化学品丙二醇、乙二醇和丙醇等是甘油转化研究中最有潜在应用价值的路径之一,甘油氢解反应易于实现连续化生产,且目标产物附加值高、选择性高,因而具有良好的经济效益。本文首先简要介绍了甘油化学,深入探讨了甘油的氢解机理,然后重点综述了甘油氢解制备1, 2-丙二醇、1, 3-丙二醇、乙二醇和丙醇高效催化剂的研究进展,并对甘油氢解未来的研究方向和发展趋势作了进一步展望。     

Column solid-phase extraction with Chromosorb-102 resin and determination of trace elements in water and sediment samples by flame atomic absorption spectrometry

A column, solid-phase extraction (SPE), preconcentration method was developed for determination of Bi, Cd, Co, Cu, Fe, Ni and Pb ions in drinking water, sea water and sediment samples by flame atomic absorption spectrometry. The procedure is based on retention of analytes in the form of pyrrolidine dithiocarbamate complexes on a short column of Chromosorb-102 resin from buffered sample solution and then their elution from the resin column with acetone. Several parameters, such as pH of the sample solution, amount of Chromosorb-102 resin, amount of ligand, volume of sample and eluent, type of eluent, flow rates of sample and eluent, governing the efficiency and throughput of the method were evaluated. The effects of divers ions on the preconcentration were also investigated. The recoveries were >95%. The developed method was applied to the determination of trace metal ions in drinking water, sea water and sediment samples, with satisfactory results. The 3σ detection limits for Cd, Cu, Fe, Ni and Pb and were found to be as 0.10, 0.44, 11, 3.6, and 10 μg l⁻¹, respectively. The relative standard deviation of the determination was <10%. The procedure was validated by the analysis of a standard reference material sediment (GBW 07309) and by use of a method based on coprecipitation.     

两种四乙酸四氮杂环烷化合物的合成

在氢氧化钾存在下，1，4，7，10-四氮杂环十二烷与溴乙酸进行N-羧甲基化反应，得到N，N′N″N-四乙酸1，4，7，10-四氛杂环十二烷（DOTA，I），经重结晶纯化，产率88．1％．在碳酸钾存在下，1，4，8，11-四氮杂环十四烷与溴乙酸卡酯进行反应，生成N－乙酸苄酯中间体．该中间体在室温和4．04×105Pa氢气压力下，用Pd／C地催化氢解脱苄基得到N，N′N″N-四乙酸1，4，8，11－四氮杂环十四烷（TETA，Ⅲ），产率56．0％。     

维生素E的催化合成路线分析

维生素E具有多种特异的生理活性,同时也是一种优良的抗氧化剂,已经逐渐成为维生素领域中的焦点,市场需求不断增加。目前合成维生素E占据市场的80%以上,提升维生素E的产量和生产效率势在必行。天然维生素E包括四种生育酚类物质和四种生育三烯酚类物质,其中α-生育酚含量最大,生理活性也最高。本综述简要介绍α-生育酚的合成路线,其中包括2, 3, 5-三甲基氢醌和异植物醇的合成以及它们二者缩合的反应。本文着重阐述路线的设计和催化剂的选择,并对存在的问题及潜在的解决办法进行评述和展望。