Synthesis and photoelectric properties of an organic dye containing benzo[1,2-b：4,5-b’]dithiophene for dye-sensitized solar cells

A novel benzodithiophene-containing organic dye BDT was synthesized and characterized as a sensitizer for a nanocrystalline TiO₂-based dye-sensitized solar cell.The BDT dye shows two major electronic absorptions.The absorption of the BDT dye covers a broad visible range from 300 nm to 550 nm.The benzodithiophene unit was used as aπbridge with several advantages:（1） It facilitates the electron transfer from the donor to the acceptor;（2） A facile structural modification on the 4,8-positions in the benzodithiophene unit can be achieved;（3） Fusing benzene with two flanking thiophene units improves the thermal stability.Under simulated AM1.5G solar light（100 mW/cm²） illumination,the DSC based on BDT gives a power conversion efficiency of 1.78%.     

Novel quinoxaline-based organic sensitizers for dye-sensitized solar cells

Novel quinoxaline-based organic sensitizers using vertical (RC-21) and horizontal (RC-22) conjugation between an electron-donating triphenylamine unit and electron-accepting quinoxaline unit have been synthesized and used for dye-sensitized solar cells (DSSCs), leading to the relatively high power conversion efficiencies of 3.30 and 5.56% for RC-21 and RC-22, respectively. This result indicates that the quinoxaline electron-accepting unit is quite a promising candidate in organic sensitizers.     

Molecular engineering of organic sensitizers containing p-phenylene vinylene unit for dye-sensitized solar cells

Three organic sensitizers containing bis-dimethylfluorenyl amino donor and a cyanoacrylic acid acceptor bridged by p-phenylene vinylene unit were synthesized. The power conversion efficiency was quite sensitive to the length of bridged phenylene vinylene groups. A nanocrystalline TiO2 dye-sensitized solar cell was fabricated using three sensitizers. The maximum power conversion efficiency of JK-59 reached 7.02%.     

Electrodeposition of Au monolayer on Pt(111) mediated by self-assembled monolayers

In-situ scanning tunneling microscopy (STM), cyclic voltammetry (CV), and infrared reflection-adsorption spectroscopy (IRRAS) have been used to examine the electrodeposition of gold onto Pt(111) electrodes modified with benzenethiol (BT) and benzene-1,2-dithiol (BDT) in 0.1 M HClO4 containing 10 microM HAuCl4. Both BT and BDT were attached to Pt(111) via one sulfur headgroup. STM and IRRAS results indicated that the other SH group of BDT was pendant in the electrolyte. Both BT and BDT formed (2 x 2) structures at the coverage of 0.25, and they were transformed into (square root(3) x square root(3))R30 degrees as the coverage was raised to 0.33. These two organic surface modifiers resulted in 3D and 2D gold islands at BT- and BDT-coated Pt(111) electrodes, respectively. The pendant SH group of BDT could interact specifically with gold adspecies to immobilize gold adatoms on the Pt(111) substrate, which yields a 2D growth of gold deposition. Molecular resolution STM revealed an ordered array of (6 x 2 square root(13)) after a full monolayer of gold was plated on the BDT/Pt(111) electrode. Since BDT was strongly adsorbed on Pt(111), gold adatoms only occupied free sites between BDT admolecules on Pt(111). This is supported by a stripping voltammetric analysis, which reveals no reductive desorption of BDT admolecules at a gold-deposited BDT/Pt(111) electrode. It seems that the BDT adlayer acted as the template for gold deposit on Pt(111). In contrast, a BT adlayer yielded 3D gold deposit on Pt(111). This study demonstrates unambiguously that organic surface modifiers could contribute greatly to the electrodeposition of metal adatoms.     

High efficiency ternary organic solar cells enabled by compatible dual-donor strategy with planar conjugated structures

Ternary organic solar cells(OSCs) have received extensive attention for improving the power conversion efficiency(PCE) of organic photovoltaics(OPVs). In this work, a novel donor material(ECTBD) consisting of benzodithiophene(BDT) central electron donor unit was developed and synthesized. The small molecular donor has the same central unit as PM6. The addition of ECTBD into PM6:Y6 system could improve the morphology of active blend layer. In addition, ECTBD showed good morphologically compatibility when blending with PM6:Y6 host, resulting in the improvement of fill factor and current density. As a result, the ternary devices based on PM6:ECTBD:Y6 ternary system achieved a highest PCE of 16.51% with fill factor of 76.24%, which was much higher than that of the binary devices(15.7%). Overall, this work provided an effective strategy to fabricate highly efficient ternary organic solar cells through design of the novel small molecular donor as the third component.     

New type of organic sensitizers with a planar amine unit for efficient dye-sensitized solar cells

A new type of organic sensitizers incorporating a planar amine unit have been synthesized and demonstrated to be a highly efficient sensitizers, showing evidence of lateral interactions on the TiO(2) surface. Under standard global air mass 1.5 solar conditions, the JK-98 sensitized cell gave a short circuit photocurrent density (J(sc)) of 16.78 mA cm(-2), an open-circuit voltage (V(oc)) of 0.745 V, and a fill factor (ff) of 0.70, corresponding to an overall conversion efficiency (η) of 8.71%.     

Dithiafulvenyl unit as a new donor for high-efficiency dye-sensitized solar cells: synthesis and demonstration of a family of metal-free organic sensitizers

This work identifies the dithiafulvenyl unit as an excellent electron donor for constructing D-π-A-type metal-free organic sensitizers of dye-sensitized solar cells (DSCs). Synthesized and tested are three sensitizers all with this donor and a cyanoacrylic acid acceptor but differing in the phenyl (DTF-C1), biphenyl (DTF-C2), and phenyl-thiopheneyl-phenyl π-bridges (DTF-C3). Devices based on these dyes exhibit a dramatically improved performance with the increasing π-bridge length, culminating with DTF-C3 in η = 8.29% under standard global AM 1.5 illumination.     

Organic solar cells based on chlorine functionalized benzo[1,2-b:4,5-b′]difuran-benzo[1,2-c:4,5-c′]dithiophene-4,8-dione copolymer with efficiency exceeding 13%

Benzo[1,2-b:4,5-b′]dithiophene(BDT) has been widely used to construct donor-acceptor(D-A) copolymers in organic solar cells(OSCs). However, benzo[1,2-b:4,5-b′]difuran(BDF), an analogue of BDT, has received less attention than BDT. The photovoltaic performance of BDF copolymers has lagged behind that of BDT copolymers. Here, we designed and synthesized two BDF copolymers, PBF1-C and PBF1-C-2Cl. PBF1-C-2Cl, which is composed of BDF and benzo[1,2-c:4,5-c′]dithiophene-4,8-dione connected by a chlorinated thiophene π-bridge, displays a low-lying highest occupied molecular orbital energy level,which helps in yielding a high open-circuit voltage(V_(oc)) in OSCs. As a result, when blended with Y6, PBF1-C-2Cl-based devices showed a high V_(oc) of 0.83 V and a power conversion efficiency(PCE) of 13.10%. To the best of our knowledge, the PCE of 13.10% is among the highest efficiency values for OSCs based on BDF copolymers.     

1,3-Benzodithiole-1,1,3,3-tetraoxide (BDT) as a versatile methylation reagent in catalytic enantioselective Michael addition reaction with enals

A protocol of an organocatalytic highly enantioselective conjugate addition of nucleophilic BDT to enals has been developed and the versatile Michael adducts serve as useful building blocks for a variety of organic transformations.     

Synthesis and characterization of NLO chromophore with benzo [1,2-b:4,5-b′]dithiophene unit as π-electron bridge

A novel chromophore BDT–TCF with benzo[1,2-b:4,5-b′]dithiophene (BDT) unit as electron bridge was synthesized and characterized by UV–vis, NMR spectroscopy, and thermal analysis. It is the first time that BDT unit was introduced into NLO materials. The chromophore showed excellent solubility in most common solvents, and good thermal stability for practical applications. The second order nonlinear optical effect was measured by hyper Rayleigh scattering method. The diagonal hyperpolarizability β_zzz of BDT–TCF was 8.2 × 10^?28 and 9.3 × 10^?29 esu in THF solvent and in PMMA polymer matrices, respectively. The potential NLO response indicates that BDT unit is a promising π-electron bridge and an excellent candidate for nonlinear optical devices.     

A Solution‐Processable Molecule using Thieno[3,2‐b]thiophene as Building Block for Efficient Organic Solar Cells

A solution‐processed acceptor‐π‐donor‐π‐acceptor (A‐π‐D‐π‐A) type small molecule, namely DCATT, has been designed and synthesized for the application as donor material in organic solar cells. The fused aromatic unit thieno[3,2‐b]thiophene (TT) flanked with thiophene is applied as π bridge, while 4,8‐bisthienyl substituted benzodithiophene (BDT) and 2‐ethylhexyl cyanoacetate are chosen as the central building block and end group, respectively. Introduction of fused ring to the small molecule enhances the conjugation length of the main chain, and gives a strong tendency to form π–π stacking with a large overlapping area which favors to high charge carrier transport. Small‐molecule organic solar cells based on blends of DCATT and fullerene acceptor exhibit power conversion efficiencies as high as 5.20 % under the illumination of AM 1.5G, 100 mW cm^?2.     

新型四硫富瓦烯-三苯胺类光敏染料理论研究

在简单结构的D-π-A三苯胺光敏染料(YD1)中引入不同数量的四硫富瓦烯(TTF)单元作为次级电子给体以增强有机光敏染料的给电子能力,设计了两个结构分别为D-D-π-A (YD2)以及2D-D-π-A (YD3)的光敏染料分子,并且采用密度泛函理论(DFT)和含时密度泛函理论(TD-DFT)分别模拟计算了纯光敏剂分子及其吸附二氧化钛团簇后的几何构型、电子结构以及光物理性能。采用周期性密度泛函理论模拟计算光敏染料分子在二氧化钛(101)面吸附的表面形貌以及态密度(DOS)。计算结果表明,TTF单元的引入不仅可以有效减少光敏染料分子的团聚,还可以提升其吸收性能。此外,光吸收效率(LHE)、电子注入驱动力(ΔG^inject)以及DOS的计算结果显示,YD2和YD3理论上可以呈现出比YD1更高的短路电流密度(J_sc)以及开路电压(V_oc)。因此,通过本文的理论研究表明,TTF单元可以作为有机光敏染料中的次级电子给体来改善光敏染料的性能。     

Synthesis of D‐π‐A‐π type benzodithiophene‐quinoxaline copolymers by direct arylation and their application in organic solar cells

Conjugated copolymers based on benzodithiophene (BDT) derivatives and thiophene‐quinoxaline‐thiophene (TQT) segments represent an efficient class of light harvesting materials for organic photovoltaic (OPV) applications. Commonly, BDT‐TQT copolymers are synthesized by Stille cross‐coupling polymerization. In this study, alkoxy and thienyl functionalized alternating BDT‐alt‐TQT copolymers are synthesized by direct arylation polymerization (DArP), using Ozawa conditions. An extensive optimization of the reaction conditions such as the catalytic system, solvent, temperature, base, and the concentration of the catalyst is accomplished. The optical and electrochemical properties of the copolymers obtained by DArP are compared to the reference polymers synthesized by Stille cross‐coupling polymerization. Finally, the optimized BDT‐alt‐TQT copolymers are incorporated into organic solar cells as electron donors. The solar cells of the DArP copolymers exhibit power conversion efficiencies up to 80% (rel.) of their Stille cross coupling analogues. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1457–1467     

An Oligothiophene–Fullerene Molecule with a Balanced Donor–Acceptor Backbone for High‐Performance Single‐Component Organic Solar Cells

A new balanced donor–acceptor molecule, namely, benzodithiophene (BDT)‐rhodanine‐[6,6]‐phenyl‐C₇₁ butyric acid methyl ester (Rh‐PC₇₁BM) comprising two covalently linked blocks, a p‐type oligothiophene‐containing BDT‐based moiety and an n‐type PC₇₁BM unit was designed and synthesized. The single‐component organic solar cell (SCOSC) fabricated from Rh‐PC₇₁BM molecules showed a power conversion efficiency (PCE) of 3.22 % with an open‐circuit voltage (V_oc) of 0.98 V. These results rank are among the highest values for SCOSCs based on a monomolecular material. In particular, the one‐molecule Rh‐PC₇₁BM device exhibits excellent thermal stability compared to reference Rh‐OH:PC₇₁BM device. The success of our monomolecular strategy can provide a new way to develop high‐performance SCOSCs.     

Side chain engineering and conjugation enhancement of benzodithiophene and phenanthrenequnioxaline based conjugated polymers for photovoltaic devices

A series of donor‐acceptor conjugated polymers incorporating benzodithiophene (BDT) as donor unit and phenanthrenequnioxaline as acceptor unit with different side chains have been designed and synthesized. For polymer P1 featuring the BDT unit and alkoxy chains substituted phenanthrenequnioxaline unit in the backbone, serious steric hindrance resulted in quite low molecular weight. The implementation of thiophene ring spacer in polymer P2 greatly suppressed the interannular twisting to extend the effective conjugation length and consequently gave rise to improved absorption property and device performance. In addition, utilizing the alkylthienyl side chains to replace the alkyl side chains at BDT unit in polymer P3 further enhanced the photovoltaic performance due to the increased conjugation length. For polymer P4, translating the alkoxy side chains at the phenanthrenequnioxaline ring into the alkyl side chains at thiophene linker group enhanced molecular planarity and strengthened π?π stacking. Consequently improved absorption property and increased hole mobility were achieved for polymer P4. Our results indicated that side chain engineering not only can influence the solubility of polymer but also can determine the polymer backbone planarity and hence the photovoltaic properties. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1915–1926     

Low‐bandgap quinoxaline‐based D–A‐type copolymers: Synthesis,characterization, and photovoltaic properties

Three classes of quinoxaline (Qx)‐based donor–acceptor (D–A)‐type copolymers, poly[thiophene‐2,5‐diyl‐alt‐2,3‐bis(4‐(octyloxy)phenyl‐quinoxaline‐5,8‐diyl] P(T‐Qx), poly{4,8‐bis(2‐ethylhexyloxy)benzo[1,2‐b:4,5‐b′]dithiophene‐2,6‐diyl‐alt‐2,3‐bis(4‐(octyloxy)phenyl‐quinoxaline‐5,8‐diy} P(BDT‐Qx), and poly{4,8‐bis(2‐ethylhexyloxy)benzo[1,2‐b:4,5‐b′]dithiophene‐2,6‐diyl‐alt‐(5′,8′‐di‐2‐thienyl‐2,3‐bis(4‐octyloxyl)phenyl)‐quinoxaline‐5,5‐diyl} P(BDT‐DTQx), were synthesized via a Stille coupling reaction. The Qx unit was functionalized at the 2‐ and 3‐positions with 4‐(octyloxy)phenyl to provide good solubility and to reduce the steric hindrance. The absorption spectra of the Qx‐containing copolymers could be tuned by incorporating three different electron‐donating moieties. Among these, P(T‐Qx) acted as an electron donor and yielded a high‐performance solar cell by assuming a rigid planar structure, confirmed by differential scanning calorimetry, UV–vis spectrophotometer, and density functional theory study. In contrast, the P(BDT‐Qx)‐based solar cell displayed a lower power conversion efficiency (PCE) with a large torsional angle (34.7°) between the BDT and Qx units. The BDT unit in the P(BDT‐DTQx) backbone acted as a linker and interfered with the formation of charge complexes or quinoidal electronic conformations in a polymer chain. The PCEs of the polymer solar cells based on these copolymers, in combination with [6,6]‐phenyl C70 butyric acid methyl ester (PC₇₁BM), were 3.3% [P(T‐Qx)], 1.9% [P(BDT‐Qx)], and 2.3% [P(BDT‐DTQx)], respectively, under AM 1.5G illumination (100 mW cm^?2). © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Adsorption of 1,3‐Benzenedithiol and 1,3‐Benzenedimethanethiol on Gold Surfaces

The adsorption characteristics of 1,3‐benzenedithiol (1,3‐BDT) and 1,3‐benzenedimethanethiol (1,3‐BDMT) on Au surfaces are investigated by means of surface‐enhanced Raman scattering, UV/Vis absorption spectroscopy, and cyclic voltammetry (CV). 1,3‐BDMT is found to adsorb via two S–Au linkages at concentrations below monolayer coverage, but to have an upright geometry as the concentration increases on Au nanoparticles. On the other hand, 1,3‐BDT is found to adsorb by forming two S–Au linkages, regardless of concentration, based on the disappearance of the ν(SH)_free stretching band. Because of the absence of the methylene unit, 1,3‐BDT appeares not to self‐assemble efficiently on Au surfaces. The UV/Vis absorption spectroscopy and CV techniques are also applied to check the formation of self‐assembled monolayers of 1,3‐BDT and 1,3‐BDMT on Au. Density functional theory calculations based on a simple adsorption model using an Au₈ cluster are performed to better understand the nature of the adsorption characteristics of 1,3‐BDT and 1,3‐BDMT on Au surfaces.     

Remarkable Enhancement of Hole Mobility of Novel DA-D’-AD Small Molecules by Thermal Annealing: Effect of the D’-Bridge Block.

Conjugated small molecules are advanced semiconductor materials with attractive physicochemical and optoelectronic properties enabling the development of next-generation electronic devices. The charge carrier mobility of small molecules strongly influences the efficiency of organic and hybrid electronics based on them. Herein, we report the synthesis of four novel small molecules and their investigation with regard to the impact of molecular structure and thermal treatment of films on charge carriers’ mobility. The benzodithiophene-containing compounds (BDT) were shown to be more promising in terms of tuning the morphology upon thermal treatment. Impressive enhancement of hole mobilities by more than 50 times was found for annealed films based on a compound M4 comprising triisopropylsilyl-functionalized BDT core. The results provide a favorable experience and strategy for the rational design of state-of-the-art organic semiconductor materials (OSMs) and for improving their charge-transport characteristics.     

Organic triplet sensitizer library derived from a single chromophore (BODIPY) with long-lived triplet excited state for triplet-triplet annihilation based upconversion

Triplet-triplet annihilation (TTA) based upconversions are attractive as a result of their readily tunable excitation/emission wavelength, low excitation power density, and high upconversion quantum yield. For TTA upconversion, triplet sensitizers and acceptors are combined to harvest the irradiation energy and to acquire emission at higher energy through triplet-triplet energy transfer (TTET) and TTA processes. Currently the triplet sensitizers are limited to the phosphorescent transition metal complexes, for which the tuning of UV-vis absorption and T(1) excited state energy level is difficult. Herein for the first time we proposed a library of organic triplet sensitizers based on a single chromophore of boron-dipyrromethene (BODIPY). The organic sensitizers show intense UV-vis absorptions at 510-629 nm (ε up to 180,000 M(-1) cm(-1)). Long-lived triplet excited state (τ(T) up to 66.3 μs) is populated upon excitation of the sensitizers, proved by nanosecond time-resolved transient difference absorption spectra and DFT calculations. With perylene or 1-chloro-9,10-bis(phenylethynyl)anthracene (1CBPEA) as the triplet acceptors, significant upconversion (Φ(UC) up to 6.1%) was observed for solution samples and polymer films, and the anti-Stokes shift was up to 0.56 eV. Our results pave the way for the design of organic triplet sensitizers and their applications in photovoltaics and upconversions, etc.     

Molecular Engineering of Pyrido[3,4‐b]pyrazine‐Based Donor–Acceptor–π‐Acceptor Organic Sensitizers: Effect of Auxiliary Acceptor in Cobalt‐ and Iodine‐Based Electrolytes

Due to the ease of tuning its redox potential, the cobalt‐based redox couple has been extensively applied for highly efficient dye‐sensitized solar cells (DSSCs) with extraordinarily high photovoltages. However, a cobalt electrolyte needs particular structural changes in the organic dye components to obtain such high photovoltages. To achieve high device performance, specific requirements in the molecular tailoring of organic sensitizers still need to be met. Besides the need for large electron donors, studies of the auxiliary acceptor segment of donor–acceptor–π‐acceptor (D‐A‐π‐A) organic sensitizers are still rare in molecular optimization in the context of cobalt electrolytes. In this work, two novel organic D‐A‐π‐A‐type sensitizers ( IQ13 and IQ17 ) have been developed and exploited in cobalt‐ and iodine‐based redox electrolyte DSSCs, specifically to provide insight into the effect of π‐bridge modification in different electrolytes. The investigation has been focused on the additional electron‐withdrawing acceptor capability with grafted long alkoxy chains. Optoelectronic transient measurements have indicated that IQ17 containing a pyrido[3,4‐b]pyrazine moiety bearing long alkoxyphenyl chains is more suitable for application in cobalt‐based DSSCs.