Pt/PMo12/PEDOT/GC电极的制备及其甲醇电氧化性能

将磷钼酸(PMo12)修饰到电化学聚合制得的聚3,4-乙烯二氧噻吩(PEDOT)(PEDOT/GC)膜表面(PMo12/PEDOT/GC),随后电沉积Pt得Pt/PMo12/PEDOT/GC电极.研究了PMo12和PEDOT对电极氧化甲醇性能的影响.结果表明,PMo12改变了电极上负载Pt的形态和结构,导致Pt纳米结构边缘产生尖锐的刺状结构.Pt/PMo12/PEDOT/GC和Pt/PEDOT/GC电极有较好的甲醇氧化电催化活性,而前者尤佳.PEDOT不仅提高甲醇氧化的电流,还使甲醇的起始氧化电位负移.进一步修饰PMo12后,可明显增大甲醇氧化的电流.     

Pt及其修饰电极上甲醇吸附和氧化的CV和EQCM研究

运用电化学循环伏安和石英晶体微天平 (EQCM )研究了 0 .1mol·L- 1H2 SO4 溶液中甲醇在Pt电极和以Sb ,S不可逆吸附原子修饰的Pt(Pt/Sbad和Pt/Sad)电极上的吸附和氧化过程 .结果表明甲醇的氧化与电极表面氧物种有着极其密切的关系 .Pt电极表面Sb吸附原子能在较低的电位下吸附氧 ,可显著提高甲醇电催化氧化活性 .与Pt电极相比较 ,Sb吸附原子修饰的Pt电极使甲醇氧化的峰电位负移了 0 .13V .相反 ,Pt电极表面S吸附原子的氧化会消耗表面氧物种 ,抑制了甲醇的电氧化 .本文从表面质量变化提供了吸附原子电催化作用的新数据     

碳纳米管表面修饰程度对碳纳米管载Pt电催化性能的影响

比较了用不同温度的浓HNO₃处理的碳纳米管(CNTs)作载体的Pt(Pt/CNTs)对甲醇氧化的电催化活性. 结果表明浓HNO₃处理使CNTs表面修饰上的含氧基团对CNTs上沉积Pt粒子的平均粒径有较大影响. 表面修饰程度适当时, 制得的Pt/CNTs中Pt粒子较小, 因此, 对甲醇氧化的电催化活性较高. 而表面修饰程度过大, 易使Pt粒子团聚, 从而降低Pt/CNTs催化剂对甲醇氧化的电化学活性.     

Pt(110)/Sb电极上甲酸的电催化氧化特征和动力学

研究了Sb在Pt(110)晶面上不可逆吸附电化学特性及甲酸在Sb_ad修饰Pt(110)电极[Pt(110)/Sb]上的电催化氧化特征及其反应动力学.发现当扫描电位的上限E_u≤0.45V时,Sb_ad可稳定地吸附在Pt(110)表面上,从而有效地抑制了甲酸的解离吸附.与未修饰的Pt(110)上的结果相比,在Pt(110)/Sb上甲酸氧化的峰电位负移了0.35V.当θ_Sb=0.126时,Pt(110)/Sb电极对甲酸的电催化活性最高.还研究了Pt(110)/Sb上甲酸氧化反应的动力学,定量解析了不同θ_Sb下甲酸氧化的速度常数kf和传递系数β.     

Pt微粒修饰纳米纤维聚苯胺电极对甲醇氧化电催化

以脉冲电流法制备的纳米纤维状聚苯胺(PANI)为Pt催化剂载体，用它制备了甲醇阳极氧化的催化电极Pt/（nano-fibular PANI）.研究结果表明, Pt/（nano-fibular PANI）电极对甲醇氧化具有很好的电催化活性,并有协同催化作用.在相同的Pt载量条件下， Pt/（nano-fibular PANI）电极比Pt微粒修饰的颗粒状聚苯胺电极Pt/(granular PANI)具有更好的电催化活性.此外， Pt的电沉积修饰方法同样影响Pt/（nano-fibular PANI）电极对甲醇氧化的催化活性.脉冲电流法沉积Pt形成的复合电极较循环伏安法电沉积得到的Pt复合电极具有更优异的催化活性.     

FeTSPc对Pt电极对氧还原的电催化性能和耐甲醇性能的影响

为了解决直接甲醇燃料电池(DMFC)中“甲醇渗透”的问题, 用大环化合物四磺酸基酞菁铁(FeTSPc)对光滑铂(Pt)电极进行修饰, 发现FeTSPc修饰的Pt电极(Pt-FeTSPc)和Pt电极对氧还原的电催化活性相近, 而Pt-FeTSPc电极对甲醇氧化的电催化活性比Pt电极下降30.9%, 表明Pt-FeTSPc电极有较好的耐甲醇能力.     

一种提高铂电催化氧化甲酸性能的简单方法

在离子液体1-乙基咪唑三氟乙酸盐(HElmTfa)中,采用循环伏安法在铂电极表面修饰聚吡咯(PPY),制得PPy-HEImTfa/Pt,并研究了其对甲酸的电催化氧化性能.与相同条件下的铂基底电极相比,PPy-HEImTfa/Pt对甲酸的电催化氧化性能有很大的提高.原位红外光谱表明,PPy-HElmTfa能降低中间体CO等对铂电极的毒化作用,促进甲酸直接氧化生成CO_2.     

一步法绿色合成甲醇燃料电池阳极催化剂

以含有多羟基的聚乙二醇为还原剂,采用水热还原技术一步法制备出Pt/石墨烯复合物电极材料。采用扫描电子显微镜(SEM)技术对石墨烯和Pt/石墨烯材料进行了形貌和结构表征。利用循环伏安电化学测试技术研究了该Pt/石墨烯电极对甲醇燃料小分子的电催化氧化性能。研究结果表明该复合材料作为阳极催化剂对甲醇表现出优异的电催化活性。该电极材料有望用作甲醇燃料电池的阳极催化剂材料。     

Pt电极上吸附原子对仲丁醇电催化氧化性能的影响

运用电化学循环伏安和石英晶体微天平研究了HClO4溶液中仲丁醇在Pt电极及以Sb和S吸附原子修饰的Pt(Pt/Sbad和Pt/Sad)电极上的电催化氧化过程 .从电极表面质量变化可以看出 ,仲丁醇的氧化与电极表面的氧物种有着极其密切的关系 .Pt电极表面Sb吸附原子可在较低的电位下吸附氧 ,明显提高仲丁醇的氧化活性 .与Pt电极相比 ,Sb吸附原子修饰的Pt电极使仲丁醇氧化的峰电位负移约 10 0mV .相反 ,Pt电极表面S吸附原子的氧化会消耗表面氧物种 ,抑制仲丁醇的氧化 .从电极表面质量变化提供了吸附原子电催化作用的数据     

Pt/TiO2纳米纤维的制备及其对甲醇的电催化氧化活性

采用静电纺丝技术结合还原浸渍法制备了Pt/TiO₂纳米纤维电催化剂, 通过X射线衍射(XRD)分析、扫描电镜(SEM)、透射电镜(TEM)和X射线能谱(EDS)等测试手段对样品的晶相、形貌、微结构和化学组成进行了表征. 测试结果表明, TiO₂纳米纤维为锐钛矿和金红石组成的混晶, Pt 纳米颗粒均匀地分布于TiO₂纳米纤维的表面, 且Pt 颗粒大小较均一, 平均粒径为4.0 nm, Pt/TiO₂纳米纤维中Pt 的质量分数约为20%. 采用三电极体系的循环伏安和计时电流电化学分析方法研究了样品在酸性溶液中对甲醇的电催化氧化活性, 结果表明, 与负载相同质量分数Pt 的Pt/P25 和商业Pt/C 催化剂相比较, Pt/TiO₂纳米纤维催化剂对甲醇呈现出较高的电催化氧化活性和更好的稳定性.     

CO在铂修饰的氧化钛电极上电催化氧化行为的研究

通过阴极还原-阳极氧化法制备了Pt—TiO2／Ti电极，研究了CO在该电极上的电化学行为和电极制备条件对CO电催化氧化的影响．结果表明，与Pt电极相比．CO在Pt—TiO2／Ti电极上的氧化峰峰电位负移了100mV，并且表现出较好的稳定性．通过XPS技术对Pt—TiO2／Ti电极进行了表征．发现Pt以金属形式存在，Ti以TiO2形式存在．Pt—TiO2／Ti电极能抗CO中毒的原因可能是因为TiO2的掺杂使引起催化剂中毒的桥式吸附的CO物种在复合催化剂上的吸附率较低所致．     

铂、钌共修饰的氧化钛电极对甲醇的电催化氧化

燃料电池;铂、钌共修饰的氧化钛电极对甲醇的电催化氧化     

乙二醛在Ti/纳米TiO2-Pt修饰电极上的电催化氧化

采用溶胶-凝胶和电沉积法制备Ti基纳米TiO2-Pt(Ti/纳米TiO2-Pt)修饰电极. X射线衍射(XRD)表明纳米TiO2为锐钛矿型, 扫描电镜(SEM)显示Pt纳米粒子在纳米TiO2多孔膜的表面呈现簇分散状态, 平均粒径约25 nm. 通过循环伏安(CV)和计时电流法研究了Ti/纳米TiO2-Pt修饰电极对乙二醛直接电氧化的电催化活性, 结果表明, 修饰电极对乙二醛的直接电氧化呈现良好的催化活性, 在0.60和1.23 V(vs SCE)出现两个氧化峰, 二者电流密度分别为16 和42 mA·cm-2, 约为纯Pt电极的2倍和1.5倍, 反应过程受浓差扩散控制.     

Effect of the iridium oxide thin film on the electrochemical activity of platinum nanoparticles

The influence of the iridium oxide thin film on the electrocatalytic properties of platinum nanoparticles was investigated using the electro-oxidation of methanol and CO as a probe. The presence of the IrO(2) thin film leads to the homogeneous dispersion of Pt nanoparticles. For comparison, polycrystalline platinum and Pt nanoparticles dispersed on a Ti substrate in the absence of an IrO(2) layer (Ti/Pt) were also investigated in this study. Inverted and enhanced CO bipolar peaks were observed using an in situ electrochemical Fourier transform infrared technique during the methanol oxidation on the Pt nanoparticles dispersed on a Ti substrate. Electrochemical impedance studies showed that the charge transfer resistance was significantly lower for the Ti/IrO(2)/Pt electrode compared with that of the massive Pt and Ti/Pt nanoparticles. The presence of the IrO(2) thin film not only greatly increases the active surface area but also promotes CO oxidation at a much lower electrode potential, thus, significantly enhancing the electrocatalytic activity of Pt nanoparticles toward methanol electro-oxidation.     

Characterization of stainless steel electrode modified by a thin film of polyaniline containing pt particles and its electrocatalytic activity for methanol oxidation

The catalytic behavior of stainless steel (SS) electrode modified by a thin film of polyaniline (PANI) containing platinum particles was studied for electrooxidation of methanol and compared with a platinated Pt/PANI electrode in acidic aqueous solution. Cyclic voltammetry (CV), chronoamperometry, CO stripping techniques were used to investigate electrochemical properties and electrocatalytic activity of SS/PANI/Pt and Pt/PANI/Pt electrodes. The morphology and particle size of Pt catalysts were characterized by Transmission Electron Microscopy (TEM) measurement. The effects of various parameters such as thickness of polymer film, medium temperature and stability of the modified electrodes on methanol oxidation were also investigated. The results indicated that the modified SS electrode exhibited a considerably high electrocatalytic activity on the methanol oxidation as well as the modified Pt electrode.     

脉冲电沉积法制备Pt-TiO2 纳米管电极及其电催化性能

采用阳极氧化法在高纯钛片上原位组装TiO2纳米管阵列, 然后用脉冲电沉积方法将Pt沉积到TiO2纳米管阵列上, 制备出Pt-TiO2纳米管电极. 利用XRD和SEM对所获电极的微观结构和形貌进行表征, 结果表明, Pt纳米颗粒以花簇状分散在TiO2纳米管上, 晶粒大小约为25.6 nm. 对甲醇的电催化性能的研究结果表明, 脉冲电沉积制得的Pt-TiO2纳米管电极比TiO2纳米管电极和纯Pt片电极具有更高的电催化活性, 是Pt电极的40多倍.     

Electrocatalytic oxidation of methanol onto platinum particles decorated nanostructured poly (1,5-diaminonaphthalene) film

In this work, platinum particles decorated nanostructured poly (1,5-diaminonaphthalene) modified glassy carbon electrode (Pt/Nano-PDAN/MGCE) is prepared. The composite catalysts are characterized by scanning electron microscopy, energy dispersive spectroscopy, and electrochemical methods. The electrochemical methanol oxidation reaction is studied at the surface of this modified electrode. At same Pt loading, the Pt/Nano-PDAN/MGCE can act as higher efficient catalyst for methanol oxidation than that Pt/MGCE. Then, the influence of some parameters such as potential scan rates, switching potential, and methanol concentration on its oxidation as well as long-term stability of the modified electrode have studied by electrochemical methods. Also, ability of the modified electrode toward electrocatalytic oxidation of formaldehyde as an intermediate in methanol oxidation has been investigated.     

Electrodeposited Pt and Pt-Sn nanoparticles on Ti as anodes for direct methanol fuel cells

Electro-oxidation of methanol was studied on titanium supported nanocrystallite Pt and Pt_x-Sn_y catalysts prepared by electrodeposition techniques. Their electro-catalytic activities were studied in 0.5mol/L H₂SO₄ and compared to those of a smooth Pt, Pt/Pt and Pt-Sn/Pt electrodes. Platinum was deposited on Ti by galvanostatic and potentiostatic techniques. X-ray diffractometer (XRD) and energy dispersive X-ray (EDX) techniques were applied in order to investigate the chemical composition and the phase structure of the modified electrodes. Scanning electron microscopy (SEM) was used to characterize the surface morphology and to correlate the results obtained from the two electrochemical deposition methods. Results show that modified Pt/Ti electrodes prepared by the two methods have comparable performance and enhanced catalytic activity towards methanol electro-oxidation compared to Pt/Pt and smooth Pt electrodes. Steady state Tafel plots experiments show a higher rate of methanol oxidation on a Pt/Ti catalyst than that on a smooth Pt.  Introduction of a small amount of Sn deposited with Pt improves the catalytic activity and the stability of prepared electrode with time as indicated from the cyclic votlammetry and the chronoamperometric experiments. The effect of variations in the composition for binary catalysts of the type Pt_x-Sn_y/Ti towards the methanol oxidation reaction is reported. Consequently, the Pt_x-Sn_y/Ti (x∶y (8∶1), molar ratio) catalyst is a very promising one for methanol oxidation.     

Ti基纳米TiO_2-CNT-Pt复合电极制备、表征及电化学性能

以电合成前驱体Ti(OEt)4直接水解法和电化学扫描电沉积法制备Ti基纳米TiO2-CNT-Pt(Ti/nanoTiO2-CNT-Pt)复合电极.透射电镜(TEM)和X射线衍射(XRD)测试表明,锐钛矿型纳米TiO2粒子(粒径5～10nm)和碳纳米管(CNT)结合形成网状结构,Pt纳米粒子(平均粒径9nm)均匀地分散在纳米TiO2-CNT复合膜表面.循环伏安及计时电流测试表明,Ti/nanoTiO2-CNT-Pt复合电极具有高活性表面,对甲醇的电化学氧化具有高催化活性和稳定性,Pt载量为0.32mg/cm2时,常温常压下甲醇氧化峰电流达到480mA/cm2.