K2FeO4在稀KOH溶液中的稳定性研究

采用分光光度法对K2FeO4在初始pH=8.0～13.0的KOH溶液中的稳定性作了系统研究.研究发现,在恒定温度下,K2FeO4的稳定性受其浓度、溶液的碱度和其分解产物FeOOH的催化分解作用三方面影响.HO-离子浓度的增大将阻碍FeO2-4离子之间的碰撞,从而有利于增强K2FeO4的稳定性,但HO-离子浓度增大到一定程度后,K2FeO4的分解产物容易生成FeOOH,而FeOOH将催化K2EeO4的进一步分解.研究结果表明,0.5 mmol·L-1的K2Fe04在pH=10.0～11.0的KOH溶液中最稳定,其初始阶段分解过程为-级反应;溶液初始pH值不同,K2FeO4的稳定性随其浓度变化的规律亦不相同.     

电解法制备K_2FeO_4过程添加剂的筛选

应用电解法,并于阳极电解液中分别加入KIO4等不同种类添加剂制备K2FeO4,考察添加剂对电流效率以及FeO42-稳定性的影响规律,产品K2FeO4的结构形貌由XRD、SEM表征.结果表明,KIO4是比较理想的添加剂,在阳极液中添加质量比为0.02%的KIO4,电解1h后,电流效率可提高31.6%,K2FeO4产品的纯度相应提高了3.85%.     

高铁酸钾在中性、酸性介质中的稳定性

研究了温度、pH、醋酸钠、Fe(Ⅲ)、氯化钠等对K2FeO4,水溶液稳定性的影响.随着温度的升高,K2FeO4在酸性介质中的稳定性逐渐减弱,随pH的增大,K2FeO4的稳定性逐渐增强;在中性介质中醋酸钠能够增强K2FeO4的稳定性,而在酸性介质中,却能够加速K2FeO4的分解;在中性和酸性介质中,三价铁盐的存在能够加速K2FeO4的分解;氯化钠能增强K2FeO4的稳定性.     

温度与碱浓度对FeO_4~(2-)/FeO_2~-体系电化学行为的影响

研究了影响Fe(OH)3进行酸式电离反应的因素,在多种浓度和温度条件下的NaOH浓溶液中采用SnO2-Sb2O3/Ti电极,研究FeO42-/FeO2-体系的电化学氧化还原反应参数及其变化趋势,结果证实该体系发生电化学氧化还原反应的最佳碱溶液浓度范围为12~14 mol/L,最佳温度范围为295~315 K.阐明了在实验条件下FeO42-/FeO2-氧化还原体系中存在由FeO43-/FeO2-构成的氧化还原电对,而FeO42-不直接与FeO2-构成氧化还原电对;并给出了FeO42-/FeO2-氧化还原体系的Latim er图.     

高铁酸钾去除微污染水源水中氰化物的试验研究

以高铁酸钾(K2FeO4)为氧化剂,对微污染水源水中微量 CN- 的去除进行了研究,考察了 pH、温度、反应时间、K2FeO4 投加量、CN- 初始浓度等因素对 CN- 去除的影响;并对用 K2FeO4 氧化除 CN- 机理进行了初步探讨.结果表明,pH 在7～10.5范围内,CN- 去除率随着 pH 的上升而升高;温...     

温度与碱浓度对FeO4^2-/FeO2^-体系电化学行为的影响

研究了影响Fe（OH）3进行酸式电离反应的因素，在多种浓度和温度条件下的NaOH浓溶液中采用SnO2-Sb2O3／Ti电极，研究FeO4^2-/FeO2^-体系的电化学氧化还原反应参数及其变化趋势，结果证实该体系发生电化学氧化还原反应的最佳碱溶液浓度范围为12—14mol／L，最佳温度范围为295～315K．阐明了在实验条件下FeO4^2-/FeO2^-氧化还原体系中存在由FeO4^2-/FeO2^-构成的氧化还原电对，而FeO2不直接与FeO2构成氧化还原电对；并给出了FeO4^2-/FeO2^-氧化还原体系的Latimer图．     

温度与碱浓度对FeO2-4/FeO-2体系电化学行为的影响

研究了影响Fe(OH)3进行酸式电离反应的因素,在多种浓度和温度条件下的NaOH浓溶液中采用SnO2-Sb2O3/Ti电极,研究FeO24-/FeO-2体系的电化学氧化还原反应参数及其变化趋势,结果证实该体系发生电化学氧化还原反应的最佳碱溶液浓度范围为12～14 mol/L,最佳温度范围为295～315 K.阐明了在实验条件下FeO24-/FeO-2氧化还原体系中存在由FeO:-/FeO-2构成的氧化还原电对,而FeO24-不直接与FeO-2构成氧化还原电对;并给出了FeO24-/FeO-2氧化还原体系的Latimer图.     

电解条件对电化学法制备FeO_4~(2-)的影响

以铁丝网作阳极,应用电解氧化法制备FeO42-溶液,并合成固体K2FeO4.研究电解条件(如搅拌、超声、静置、温度、电流密度等)对该制备过程电流效率的影响规律.结果表明:以14 mol/L NaOH作电解液,于30℃、10 mA.cm-2及搅拌作用下电解,可获得较高的电流效率.     

高铁酸钾氧化脱除模拟轻质油中的含硫化合物

考察了K2FeO4对模拟轻质油中苯并噻吩（BT）及二苯并噻吩（DBT）的氧化性能。结果表明，水相中K2FeO4对BT、DBT的氧化活性比较低，水的存在使K2FeO4水解成黄色的Fe(OH)3而失去氧化有机硫化物的能力；在冰乙酸反应介质中，K2FeO4对BT及DBT的氧化活性有了明显的提高；固体催化剂KM的加入显著提高了乙酸反应介质中K2FeO4对BT及DBT的氧化活性。常温、常压，醋酸/模拟油体积比为1.0，K2FeO4/S摩尔比为1.0，KM/K2FeO4质量比为1.0的条件下，DBT的转化率达98.4%，BT的转化率为70.1%。     

SO_4~(2-)/TiO_2光催化氧化邻硝基苯酚

采用不同浓度的硫酸溶液浸渍处理TiO2,制得不同SO42-含量的SO42-/TiO2光催化剂.考察了光催化剂对邻硝基苯酚溶液的光催化行为.发现SO42-/TiO2的光催化活性高于TiO2的光催化活性,浸渍液中H2SO4的浓度和焙烧温度对SO42-/TiO2的催化活性有一定的影响,最佳浸渍H2SO4浓度为0.5 mol.L-1,最佳焙烧温度为500℃.     

高铁酸钾的合成与电化学性能研究

本文主要研究了锂离子电池正极材料高铁酸钾的合成,表征和电化学性质.用次氯酸钾与硝酸铁于碱性介质中反应得到高铁酸钾粗品,重结晶后成纯度大于97%的产品,用XRD和FTIR等方法对高铁酸钾进行表征和分析.初步研究了K2FeO4/Li电池的充放电性能.     

K2FeO4-Zn碱性固态电解质电池电化学性能研究

应用溶液铸膜法制备出了交联聚乙烯醇(PVA)/聚丙烯酸(PAA)-KOH-H2O复合碱性固态电解质膜, 其厚度为150 µm左右, SEM测试结果表明其表面呈均相的非晶态结构, 交流阻抗(EIS)测试表明室温离子电导率可达3.5×10－2 S• cm－1, 循环伏安(CV)测试表明其电化学稳定窗口为3.5 V左右, 将其应用于一次碱性K2FeO4-Zn电池, 通过研究固态电解质膜在不同浓度KOH碱液中预处理和其在不同放电倍率下的放电性能, 结果表明, 9 mol•L－1为最佳固态电解质膜预处理碱液浓度, 0.4 C为最佳放电倍率, 1.0 V以上容量最高可达222.6 mAh•g－1, 并表现出良好的放电平台特性.     

高铁酸盐在SnO2-Sb2O3/Ti电极上的选择性电化学合成

合成了SnO2-Sb2O3/Ti电极材料.实验结果证实,在14mol/LNaOH水溶液中和完全避免析氧反应的条件下,Fe(Ⅱ)物种在该电极上进行电化学氧化并生成FeO42-.结果表明,Fe(OH)3在浓NaOH溶液中发生酸式电离,形成可溶于水的FeO2-,该离子的浓度随着碱溶液浓度变化而发生明显变化,而且它还是发生化学氧化和电化学氧化的反应物.在SnO2-Sb2O3/Ti电极上,FeO42-的电化学还原起始电位为0.38V(vs.Hg/HgO,14mol/LNaOH),FeO2-电化学氧化起始电位为0.54V.结果还表明,用电化学方法氧化Fe(Ⅱ)物种生成FeO42-是个多步骤过程.     

Kinetics of the reaction of aqueous iron(vi) (FeVIO42-) with ethylenediaminetetraacetic acid

The reaction of aqueous iron(vi) (FeVIO42-, Fe(vi)) with ethylenediaminetetraacetic acid (EDTA) was studied kinetically as a function of pH (1.98-12.40) and temperature (15-45 degrees C) using a stopped flow kinetic technique. The rate law for the reaction of Fe(vi) with EDTA was found to be first-order with respect to each reactant over the entire studied pH range. The observed rate constants, k, decrease with an increase in pH, varying from 4.19 x 10(4) to 8.60 x 10(-2) M(-1) s(-1) over the pH range. The speciation of Fevi (H3FeO4+, H2FeO4, HFeO4-, and FeO42-) and EDTA (H4Y, H3Y-, H2Y2-, HY3-, and Y4-, Y = EDTA) species was used to explain the pH dependence of the k values. From the temperature effect on k at pH 5.4, 7.1, and 9.2, activation parameters, DeltaS(double dagger) and DeltaH(double dagger), were obtained for the reactions of Fe(VI) with EDTA. The values of DeltaS(double dagger) for the reactions were found to be negative, implying a highly ordered transition state in the reaction. The DeltaH(double dagger) for the reaction at pH 7.1 and 9.2 showed similar values within experimental error. Using the observed enthalpy parameters and the enthalpy of deprotonation of HFeO4- and EDTA species (HEDTA3- and H2EDTA2-), the enthalpy of deprotonation of H2FeO4 (DeltaH0H2FeO4) was determined as 5.7 +/- 3.0 kJ mol(-1). The reactivity of Fe(VI) with aminopolycarboxylates (APCs) was also studied in alkaline medium. The order of reactivity was determined as primary > secondary > tertiary, which suggests that FeVIO42- attacks at the nitrogen atom sites of APCs.     

High rate capability of Fe/FeO/Fe3O4 composite as anode material for lithium-ion batteries

Fe/FeO/Fe₃O₄ composite was synthesized by a simple solid method using ferric citrate and phenolic resin as raw materials. The reaction processes of raw materials mixture were characterized by thermogravimetric analysis (TGA) under nitrogen. X-Ray diffraction (XRD) and scanning electron microscopy (SEM) were used to investigate the structure and morphology of the products. The results showed that the obtained material was octahedral Fe/FeO/Fe₃O₄ composite with a size of 2-4 μm. The electrochemical performances of Fe/FeO/Fe₃O₄ composite as anode material were also evaluated, which exhibited a stable specific capacity of 260.3 mAh g^-1 and an ideal initial coulombic efficiency of 90.8% in the range of 0.05~3 V at the 5C rate. A good rate capacity of Fe/FeO/Fe₃O₄ composite electrode was also shown by the charge-discharge testing even at the rate of 60C. The better rate capability of Fe/FeO/Fe₃O₄ electrode could be measured in higher temperature.     

漆树漆酶对共存二茂铁和亚铁氰化钾的催化氧化

漆酶是含铜金属酶,主要来源于漆树漆液(生漆)和真菌,分别称漆树漆酶和真菌漆酶。近年来,人们对漆酶的催化氧化反应的研究很感兴趣。已经发现漆酶的催化反应大多在水溶液中进行,氧化底物主要是邻、对苯二酚(胺)及其衍生物,对二茂铁(Fc-H)及其衍生物(Fc-R)的催化氧化尚不多见,对共存Fc-H和K_4Fe(CN)_6的催化氧化也未见报道,这可能与Fc-H和多数Fc-R不溶于水有关。本文选择二乙二醇单丁醚(DGBE)和磷酸盐缓冲液为混合溶剂,使Fc-H和K_4Fe(CN)_6以一定浓度共溶其中,考察了在该体系中漆树漆酶对Fc-H和K_4Fe(CN)_6的催化氧化反应。     

A kinetic study of the reactions FeO+ + O, Fe+.N2 + O, Fe+.O2 + O and FeO+ + CO: implications for sporadic E layers in the upper atmosphere

These gas-phase reactions were studied by pulsed laser ablation of an iron target to produce Fe(+) in a fast flow tube, with detection of the ions by quadrupole mass spectrometry. Fe(+).N(2) and Fe(+).O(2) were produced by injecting N(2) and O(2), respectively, into the flow tube. FeO(+) was produced from Fe(+) by addition of N(2)O, or by ligand-switching from Fe(+).N(2) following the addition of atomic O. The following rate coefficients were measured: k(FeO(+) + O --> Fe(+) + O(2), 186-294 K) = (3.2 +/- 1.5) x 10(-11); k(Fe(+).N(2) + O --> FeO(+)+ N(2), 294 K) = (4.6 +/- 2.5) x 10(-10); k(Fe(+).O(2) + O --> FeO(+) + O(2), 294 K) = (6.3 +/- 2.7) x 10(-11); and k(FeO(+) + CO --> Fe(+) + CO(2), 294 K) = (1.59 +/- 0.34) x 10(-10) cm(3) molecule(-1) s(-1), where the quoted uncertainties are a combination of the 1sigma standard errors in the kinetic data and the systematic experimental errors. The surprisingly slow reaction between FeO(+) and O is examined using ab initio quantum calculations of the relevant potential energy surfaces. The importance of this reaction for controlling the lifetime of sporadic E layers is then demonstrated using a model of the upper mesosphere and lower thermosphere.     

Rechargeable Fe(III/VI) super-iron cathodes

This study addresses a fundamental challenge posed by hexavalent iron electrochemical irreversibility, which had slowed practical development of reversible Fe(VI) cathodes; nanolayers circumvent fundamental passivation challenges, and are electrodeposited from solution phase FeO(4)(2-), forming 601 mAh g(-1) Li, and 485 mAh g(-1) Na, Fe(III/VI) alkaline cathodes, the latter exhibiting 100-200 storage cycles at 80% depth of discharge, providing pathways towards metal hydride batteries with twice the cathode capacity.     

Fe–N/C nanofiber electrocatalysts with improved activity and stability for oxygen reduction in alkaline and acid solutions

Fe–N/C nanofiber (Fe–N/CNF) electrocatalysts were prepared by impregnating electrospun polyacrylonitrile nanofibers with iron nitrate (Fe(NO₃)₃) solution and subsequent heat treatment, exhibiting improved activity and stability during oxygen reduction reaction (ORR) both in 0.1 M KOH (pH?=?13) and 0.5 M H₂SO₄ (pH?=?0) electrolyte solutions. Higher treatment temperature and NH₃ atmosphere were preferred by the Fe–N/CNF catalysts, and especially the concentration of Fe(NO₃)₃ solution exerted great effects on the surface morphology, structure, and thus electrocatalytic performance of the catalysts. The Fe–N/CNFs prepared using 0.5 wt% Fe(NO₃)₃ solution showed relatively higher ORR activity in alkaline and acid solutions and better stability especially in 0.5 M H₂SO₄ solution than the catalyst without Fe, probably because Fe could promote the graphitization of the polymer-converted carbon species, enhancing the resistance to electrochemical oxidation and thus the stability of the Fe–N/CNF catalysts.