Ag_核Au_壳金属复合纳米粒子的制备及表面增强拉曼光谱研究

在已制备好的Ag纳米粒子表面,通过化学还原的方法沉积生长Au包裹层,制备了粒子尺寸为50-70nm的Ag核Au壳复合纳米粒子.通过改变AuCl₄^-量,使Ag_100-xAu_x中Au的含量由x=0变为x=30.用UV-Vis吸收光谱和透射电子显微镜(TEM)对该结构纳米粒子进行了表征,并以对巯基苯胺(PATP)为探针分子进行表面增强拉曼光谱(SERS)研究.表面拉曼光谱表明,该结构的纳米粒子具有比Ag更强的SERS活性,随着Au:Ag比例的逐渐增加,其活性呈现先增大后减小的趋势,其最大增强约为Ag纳米粒子的10倍.     

一种新型表面增强拉曼活性基底的制备方法

表面增强拉曼光谱技术 (SERS)具有极高的灵敏度 ,对某些分子其灵敏度比常规拉曼光谱高一百万倍 ,能检测吸附在金属表面的单分子层和亚单分子层的分子 ,并提供丰富的分子结构信息 [1～ 5] .活性基底的制备是获得 SERS信号的前提 ,电化学粗糙化的电极、贵金属溶胶及真空蒸镀的金属岛膜是SERS分析中最常用的 3种活性基底 ,在实际应用中各有利弊 .本文报道一种新的制备银纳米粒子基底的方法 ,可使银纳米粒子生长到合适的尺寸 ,以达到最佳SERS增强效果 .利用紫外 -可见光谱和 AFM研究该 SERS基底纳米粒子的尺寸分布和形貌 ,以 1 ,4-(双…     

Cu2O/Ag纳米复合物的表面增强拉曼光谱

用一种简单的化学还原方法制备了银纳米粒子包覆的氧化亚铜（Cu2O）纳米复合物。扫描电子显微镜显示Cu2O 为八面体型的纳米粒子,表面光滑,结构对称。包覆的Ag部分占据Cu2O粒子表面。通过比较Ag/Cu2O纳米复合物、Ag溶胶及Cu纳米粒子表面吸附的4-巯基吡啶（4-Mpy）分子表面增强拉曼光谱（SERS）发现,利用此方法得到了Cu2O粒子表面吸附分子的拉曼光谱。银纳米粒子所产生的电磁场增强又增强了吸附在Cu2O上的4-Mpy拉曼信号。这种方法为初步研究Cu2O表面吸附分子性质提供了依据,扩宽了SERS的使用范围,使SERS应用在纳米半导体材料上成为可能。     

基于银镜的高灵敏表面增强拉曼光谱基底制备及其用于呋喃唑酮检测

采用化学沉积法制备了表面增强拉曼散射光谱(SERS)银镜基底,用NaCl溶液与HCl溶液除去银镜表面杂质后,通过扫描电子显微镜对基底进行了表征,表明该基底表面的银纳米粒子平均粒径约为200 nm,以对巯基苯胺为探针分子测得其增强因子为4.6×105.利用表面增强拉曼光谱及表面吸附选择定律研究了广谱抗菌药呋喃唑酮在该基底表面的吸附状态,证明呋喃唑酮分子主要是通过CN吸附于银纳米粒子表面的.     

金核银壳纳米粒子薄膜的制备及SERS活性研究

采用柠檬酸化学还原法制备金溶胶, 通过自组装技术在石英片表面制备金纳米粒子薄膜, 在银增强剂混合溶液中反应获得金核银壳纳米粒子薄膜. 用紫外-可见吸收光谱仪和原子力显微镜(AFM)研究了不同条件下制备的金核银壳纳米粒子薄膜的光谱特性和表面形貌, 并以结晶紫为探针分子测量了金核银壳纳米粒子薄膜的表面增强拉曼光谱(SERS). 结果表明, 金纳米粒子薄膜的分布、银增强剂反应时间的长短对金核银壳纳米粒子薄膜的形成均有重要影响. 制备过程中, 可以通过控制反应条件获得一定粒径的、具有良好表面增强拉曼散射活性的金核银壳纳米粒子薄膜.     

ZnO/PAN亚微米复合纤维的制备及光催化性能

采用静电纺丝技术,以聚丙烯腈(PAN)和醋酸锌[Zn(Ac)2]为前驱物,制备了Zn(Ac)2/PAN复合纤维。利用六亚甲基四胺[(CH2)6N4]辅助的水热合成法,成功制备了具有异质结构的ZnO/PAN亚微米复合纤维。利用扫描电镜(SEM)、X射线能量色散光谱(EDS)、X射线衍射(XRD)、透射电子显微镜(TEM)和拉曼光谱(Raman)等对产物的形貌和结构进行表征。结果表明,ZnO纳米粒子均匀地生长在PAN纤维表面,形成了ZnO/PAN亚微米复合纤维。以罗丹明B为目标降解物,对光催化性能进行评价,结果表明,ZnO/PAN亚微米复合纤维具有良好的光催化活性。     

银纳米粒子簇的设计、 制备和表面增强拉曼光谱

通过匹配激光光斑直径与胶体微球的尺寸, 设计制备了银纳米粒子的表面增强拉曼散射(SERS)基底, 并将其用于研究单个银纳米粒子簇的表面增强拉曼光谱. 在制备纳米粒子的过程中, 考察了等离子体刻蚀时间与银沉积厚度对“单”银纳米粒子结构与形貌的影响. 将吡啶、 巯基苯和罗丹明R6G作为SERS探针分子, 研究了其SERS效应, 通过荧光共振能量转移(FRET)机理, 实现了染料分子在单银纳米粒子簇上的SERS效应. SERS光谱测试与相关计算结果表明, 单个银纳米粒子簇的拉曼增强因子能够达到约10⁶.     

SnO2纳米粒子作为SERS基底的研究

采用溶胶-水热法制备了不同尺寸的SnO2纳米粒子, 并将其作为表面增强拉曼散射(Surface-enhanced Raman scattering, SERS)活性基底, 重点探讨了表面缺陷能级与SERS性能的关系. 观察到4-巯基苯甲酸(4-MBA)吸附在150 ℃水热合成的SnO2纳米粒子上的SERS 信号最强, 随着在空气中煅烧温度的升高, SERS信号逐渐减弱. 分别用透射电子显微镜、 紫外-可见光谱、 荧光光谱、 X射线衍射和X射线光电子能谱对SnO2纳米粒子进行了表征. 结果表明, SnO2纳米粒子的表面氧空位和缺陷等表面性质在增强拉曼散射性能中发挥着重要的作用, 表面氧空位和缺陷等含量越高其SERS信号就越强.     

对称性降低的SiO2/Ag核壳结构纳米粒子的制备及表面增强拉曼活性研究

采用湿化学还原法在自组装的单层阵列二氧化硅纳米粒子表面沉积银膜制备了SiO2核/Ag帽复合纳米结构。通过透射电镜(TEM)、扫描电镜(SEM)、X射线衍射(XRD)和紫外-可见分光光度计(UV/Vis)研究和表征了该复合纳米结构的表面形貌、结构及光学性质。所制备的复合纳米粒子表面粗糙,其表面呈现无数纳米级谷粒状结构,SiO2内核粒径为350nm的银纳米帽的表面等离子共振吸收的2个共振峰分别位于382和689nm处。以亚甲基蓝作为探测分子研究了SiO2粒径为350和450nm的SiO2/Ag帽状复合纳米粒子的表面增强拉曼散射(SERS)活性,增强因子分别为3.6×109和3.9×109。结果表明,湿化学还原法制备的SiO2核/Ag帽复合纳米结构是很好的拉曼活性基底。     

基于水滴模板法的微纳复合超疏水结构制备的研究

利用粒子辅助水滴模板法的实施获得规则蜂窝状图案化多孔结构模板,并进一步利用聚二甲基硅氧烷(PDMS)复制转移技术获得表面具有微米尺寸蜂窝状突起阵列的反向图案化结构.以这种图案化突起结构作为微米尺寸所提供的微米级粗糙度为基础,设计了2种的简单的二次纳米结构的引入过程,最终实现了微米级阵列和纳米级粗糙度的复合.第一种方法借助银镜反应来实现纳米银结构的化学沉积,最终在PDMS阵列表面获得了致密的纳米银颗粒沉积层,并成功获得了表面接触角达166度的超疏水性质.第二种方法利用了聚电解质/二氧化硅粒子层层静电自组装的方法引入纳米结构,结果在仅仅进行了2个组装循环的条件下即可获得超疏水性质的表面复合结构.通过简单的实验设计试图提供一种基于水滴模板法的微纳复合超疏水结构的普适性制备方法.     

Bending elasticity of charged surfactant layers: the effect of mixing

Expressions have been derived from which the spontaneous curvature (H(0)), bending rigidity (k(c)), and saddle-splay constant (k(c)) of mixed monolayers and bilayers may be calculated from molecular and solution properties as well as experimentally available quantities such as the macroscopic hydrophobic-hydrophilic interfacial tension. Three different cases of binary surfactant mixtures have been treated in detail: (i) mixtures of an ionic and a nonionic surfactant, (ii) mixtures of two oppositely charged surfactants, and (iii) mixtures of two ionic surfactants with identical headgroups but different tail volumes. It is demonstrated that k(c)H(0), k(c), and k(c) for mixtures of surfactants with flexible tails may be subdivided into one contribution that is due to bending properties of an infinitely thin surface as calculated from the Poisson-Boltzmann mean field theory and one contribution appearing as a result of the surfactant film having a finite thickness with the surface of charge located somewhat outside the hydrophobic-hydrophilic interface. As a matter of fact, the picture becomes completely different as finite layer thickness effects are taken into account, and as a result, the spontaneous curvature is extensively lowered whereas the bending rigidity is raised. Furthermore, an additional contribution to k(c) is present for surfactant mixtures but is absent for k(c)H(0) and k(c). This contribution appears as a consequence of the minimization of the free energy with respect to the composition of a surfactant layer that is open in the thermodynamic sense and must always be negative (i.e., k(c) is generally found to be brought down by the process of mixing two or more surfactants). The magnitude of the reduction of k(c) increases with increasing asymmetry between two surfactants with respect to headgroup charge number and tail volume. As a consequence, the bending rigidity assumes the lowest values for layers formed in mixtures of two oppositely charged surfactants, and k(c) is further reduced in anionic/cationic surfactant mixtures where the surfactant in excess has the smaller tail volume. Likewise, the reduction of k(c) is enhanced in mixtures of an ionic and a nonionic surfactant where the ionic surfactant has the smaller tail. The effective bilayer bending constant (k(bi)) is also found to be reduced by mixing, and as a result, k(bi) is seen to go through a minimum at some intermediate composition. The reduction of k(bi) is expected to be most pronounced in mixtures of two oppositely charged surfactants where the surfactant in excess has the smaller tail in agreement with experimental observations.     

Partial Least Squares Modeling and Genetic Algorithm Optimization in Quantitative Structure-Activity Relationships

Abstract

Quantitative structure-activity relationship (QSAR) studies based on chemometric techniques are reviewed. Partial least squares (PLS) is introduced as a novel robust method to replace classical methods such as multiple linear regression (MLR). Advantages of PLS compared to MLR are illustrated with typical applications. Genetic algorithm (GA) is a novel optimization technique which can be used as a search engine in variable selection. A novel hybrid approach comprising GA and PLS for variable selection developed in our group (GAPLS) is described. The more advanced method for comparative molecular field analysis (CoMFA) modeling called GA-based region selection (GARGS) is described as well. Applications of GAPLS and GARGS to QSAR and 3D-QSAR problems are shown with some representative examples. GA can be hybridized with nonlinear modeling methods such as artificial neural networks (ANN) for providing useful tools in chemometric and QSAR.     

Partial least squares modeling and genetic algorithm optimization in quantitative structure-activity relationships

Quantitative structure-activity relationship (QSAR) studies based on chemometric techniques are reviewed. Partial least squares (PLS) is introduced as a novel robust method to replace classical methods such as multiple linear regression (MLR). Advantages of PLS compared to MLR are illustrated with typical applications. Genetic algorithm (GA) is a novel optimization technique which can be used as a search engine in variable selection. A novel hybrid approach comprising GA and PLS for variable selection developed in our group (GAPLS) is described. The more advanced method for comparative molecular field analysis (CoMFA) modeling called GA-based region selection (GARGS) is described as well. Applications of GAPLS and GARGS to QSAR and 3D-QSAR problems are shown with some representative examples. GA can be hybridized with nonlinear modeling methods such as artificial neural networks (ANN) for providing useful tools in chemometric and QSAR.     

Recent innovations in enantiomer separation by electrochromatography utilizing modified cyclodextrins as stationary phases.

Enantiomer separation by electrochromatography employing modified cyclodextrins as stationary phases is performed in two ways. (i) Polysiloxane-linked permethylated beta-cyclodextrin (Chirasil-Dex 1) or related selectors are coated and immobilized onto the inner surface of a capillary column. Enantiomer separation is performed in the open tube and the method is referred to as open-tubular capillary electrochromatography (o-CEC). (ii) Silica-linked native beta-cyclodextrin, permethylated beta-cyclodextrin (Chira-Dex 2) or hydroxypropyl-beta-cyclodextrin are filled into a capillary column and the bed is secured by two frits. Enantiomer separation is performed in a packed column and the method is referred to as packed capillary electrochromatography (p-CEC). In a unified instrumental approach, method (i) as well as method (ii) can be operated both in the electro- and pressure-driven modes (o-CEC vs. open-tubular liquid chromatography (o-LC) and p-CEC vs. p-LC). It is demonstrated that the electro-driven variant affords higher efficiencies at comparable elution times. Employing a single open-tubular column coated with Chirasil-Dex 1, a unified enantioselective approach can be realized in which the same selectand is separated using all existing chromatographic modes for enantiomers, i.e., gas chromatography (GC), super-critical fluid chromatography (SFC), o-LC and o-CEC. As the chiral selector is utilized as a stationary phase, an additional chiral selector may be added to the mobile phase. In the resulting dual chiral recognition systems, enhancement of enantioselectivity (matched case) or compensation of enantioselectivity (mismatched case) may be observed. The overall enantioselectivity is dependent on the sense of enantioselectivity of the selectors chosen and their influence on the electrophoretic and electroosmotic migration of the enantiomers of a selectand.     

Development and application of an electrochemiluminescent flow-injection cell based on CdTe quantum dots modified electrode for high sensitive determination of dopamine

A nano-liter sized flow-cell is developed for constructing a flow injection analysis (FIA) system with electrochemiluminescent (ECL) detection. A sensitive ECL electrode is applied as the working electrode in this flow-cell. It is obtained by immobilizing the composite of CdTe quantum dots (QDs), carbon nanotubes (CNTs) and chitosan (Chit) on indium tin oxide (ITO) glass. The CdTe QDs were synthesized in our lab and possessed a high quantum yield. It has been demonstrated as an efficient anodic ECL material with the triethylamine (TEA) as the co-reactant. The flow-cell gives the stable ECL background under optimized conditions for parameters such as electrolytic pulse, concentration of TEA and flow rate, etc. The sensitive ECL quenching response of dopamine (DA) is realized on this FIA system within the linear range from 10 pM to 4 nM and a detection limit as low as 3.6 pM. It is practically used to determine the neurotransmitters in cerebro-spinal fluid (CSF) with DA as the index and with an average recovery of 94%.     

Simple solid-phase spectrophotometric method for free iron(III) determination

A simple and rapid solid-phase spectrophotometric procedure to determine free Fe(III) in environmental and biological samples is proposed. In particular, a deferoxamine (DFO) self assembled monolayer on mesoporous silica (DFO SAMMS) is developed and here applied as a sensor for iron(III). The solid product became brownish when put in contact with iron(III) solutions; so an immediate application as colorimetric sensor is considered. In order to optimize the DFO SAMMS synthesis and to obtain the best product for iron(III) sensing, a factorial experimental design is performed selecting the maximum absorption at 425 nm as response. The robustness of the spectrophotometric method is also proved.     

Reactive layer-by-layer deposition of poly(ethylene imine) and a precursor of TiO2: influence of the sodium chloride concentration on the film growth, interaction with hexacyanoferrate anions, and particle distribution in the film

Films prepared according to a layer-by-layer (LBL) manner find increasing importance in many applications such as coatings with dedicated optical or electronic properties, particularly when including nanomaterials. An alternative way to prepare such hybrid layer-by-layer coatings is to perform sol-gel chemistry in a layer-by-layer manner. In this article, we highlight the importance of the NaCl concentration as a parameter to control the growth as well as the properties of LBL films made from poly(ethylene imine) as the organic counterpart and titanium IV (bisammoniumlactato)dihydroxyde ([Ti(lac)(2)(OH)(2)](2-)) as the precursor of TiO(2). An increase in the sodium chloride concentration leads to the faster growth of the film and to a decrease in the number of hexacyanoferrate anions remaining in the film after a buffer rinse. This may be due to a progressive increase in the fraction of negatively charged TiO(2) as suggested by transmission electron microscopy. In the presence of 0.5 M NaCl, the fraction of TiO(2) is close to 60% in mass. As a surprising finding, the films produced from 0.15 M NaCl are not homogeneously filled with TiO(2) even if the film is produced in an LBL fashion. The increased concentration of TiO(2) at the film-solution interface could constitute a barrier for the incorporation of the negatively charged redox probe.     

Development of a selective optical sensor for Cr(VI) monitoring in polluted waters

An optical sensor is described for the sensitive and selective determination of the Cr(VI) ion in aqueous solutions. The optode membrane is prepared by incorporating Aliquat 336 as an ionophore and a chromoionophore (4',5'-dibromofluorescein octadecyl ester) in a poly(vinyl chloride) (PVC) membrane containing ortho-nitrophenyloctyl ether (o-NPOE) as a plasticizer. The response to Cr(VI) is indicated by co-extraction of the target species and of hydrogen ions into the bulk of the membrane yielding large absorbance changes which can easily be measured in the visible spectral range. The optode membrane shows a reversible response in the concentration range of 1.1x10(-5)-1.0x10(-3) M and has been shown to be more selective towards the HCrO4(-) ion than other anions with a selectivity pattern HCrO4(-) > SCN- approximately = ClO4(-) > NO3(-) approximately = I- approximately = NO2(-) > H2PO4(-) approximately = Cl- approximately = SO4(2-). The sensing method developed has successfully been applied to the determination of Cr(VI) in spiked river water as well as in electroplating rinse waters.     

Cancerous cell death from sensitizer free photoactivation of singlet oxygen

Singlet oxygen ((1)O(2)) is an electronic state of molecular oxygen which plays a major role in many chemical and biological photo-oxidation processes. It has a high chemical reactivity which is commonly harnessed for therapeutic issues. Indeed, (1)O(2) is believed to be the major cytotoxic agent in photodynamic therapy. In this treatment of cancer, (1)O(2) is created, among other reactive species, by an indirect transfer of energy from light to molecular oxygen via excitation of a photosensitizer (PS). This PS is believed to be necessary to obtain an efficient (1)O(2) production. In this paper, we demonstrate that production of (1)O(2) is achieved in living cells from PS-free 1270 nm laser excitation of molecular oxygen. The quantity of (1)O(2) produced in this way is sufficient to induce an oxidative stress leading to cell death. Other effects such as thermal stress are discriminated and we conclude that cell death is only due to (1)O(2) creation. This new simplified scheme of (1)O(2) activation can be seen as a breakthrough for phototherapies of malignant diseases and/or as a noninvasive possibility to generate reactive oxygen species in a tightly controlled manner.