水相中CdTe纳米晶的制备及其光学性质

用不同稳定剂(巯基乙酸(TGA)、巯基丙酸(MPA)、L-半胱氨酸(L-Cys)、3-巯基-1,2-丙二醇(TG))在水相中制备了CdTe纳米晶, 并用透射电子显微镜(TEM)、X射线光电子能谱(XPS)和X射线粉末衍射(XRD)等技术对其进行了表征. 研究了不同水相合成条件对CdTe纳米晶光学性质的影响, 结果表明, n(Cd):n(Te)、溶液pH值、回流时间以及稳定剂的性质, 对纳米晶的光学性质具有显著影响. 制得的CdTe纳米晶发射峰窄且对称(半高全宽达38 nm), 用不同稳定剂制备的纳米晶发光量子效率有所不同, 用不同的激发波长对纳米晶进行激发时, 发射峰并未表现出明显的移动.     

用于微生物体标记的CdTe半导体纳米晶超声波水相合成

利用超声波法制备高质量CdTe半导体纳米晶体, 采用该方法不仅降低了实验成本, 简化了实验流程, 而且还可制备出量子产率达到50%的CdTe纳米晶体, 具有较好的光谱学性质, 可用于莱姆病伯氏螺旋体(微生物)的荧光标记, 有利于提高对该病的检测效率.     

电化学法合成强荧光CdTe量子点

采用电化学方法产生的H2Te为碲源(Te2-),快速合成了水溶性强荧光的CdTe量子点.该方法具有操作简单、安全、快速廉价和可大量制备等优点.合成过程中考察了合成温度,pH值和配体比例对制备CdTe量子点的影响.在最优化的实验条件下,电化学方法合成的巯基丙酸配位的CdTe荧光量子产率可达到55％;通过紫外可见光谱(UV...     

Microwave-assisted growth and characterization of water-dispersed CdTe/CdS core-shell nanocrystals with high photoluminescence

A novel microwave-assisted method of growth of high-quality CdTe/CdS core-shell nanocrystals in the aqueous phase is presented in this paper. The photoluminescence quantum yield (PLQY) is greatly enhanced by epitaxial growth of the CdS shell. Under optimum conditions, the PLQY of as-prepared nanocrystals reaches as high as 75% without any post-treatment. Furthermore, these investigations demonstrate that microwave irradiation is tremendously useful for fast epitaxial growth of nanocrystals due to its special characteristics. As a result, the microwave synthesis is sufficiently time-economizing (only five minutes are required) to obtain optimum amounts of CdTe/CdS core-shell nanocrystals in comparison to the conventional illumination method (several days are required). Therefore, this current research not only provides a rapid microwave synthesis for producing highly fluorescent CdTe/CdS core-shell nanocrystals, but also it presents some advantages of the microwave synthesis in comparison to the illumination method.     

Synthesis of Zinc Blende CdTe Nanocrystals and Facile Shape Conversion from Multipods to Dot-shaped Particles

Branched CdTe nanocrystals with zinc blende structure were directly synthesized in the early growth stage at a high initial concentration of cadmium precursor and a high molar ratio of Cd precursor to Te precuesor. Activation of the cadmium precursor by octadecylamine was found to be critical for the formation of branched CdTe nanocrystals. Furthermore, these as-prepared CdTe nanocrystals can evolve into nearly monodisperse dots through Ostwald ripening and still keep strong photoluminescence. These results manifest a new route to synthesize branch- and dot-shaped CdTe nanocrystals with zinc blende structure.     

Synthesis of Aqueous CdTe Nanocrystals with High Efficient Blue‐Green Emission of Exciton

As one of the most popular nanocrystals (NCs), aqueous CdTe NCs have very weak green emission under conventional synthesis conditions. In this work, we report the first example of blue‐emitting CdTe NCs directly synthesized in aqueous solution by slowing down the growth rate after nucleation. The key for the synthesis is the optimization of NC growth conditions, namely pH range of 7.5 to 8.5, TGA/Cd ratio of 3.6, Cd/Te ratio of 10, and Te concentration of 2×10^?5 mol/L, to get a slow growth rate after nucleation. The as‐prepared blue‐emitting CdTe NCs have small size (as small as 1.9 nm) and bright emission [with 4% photoluminescence quantum yield (PL QY) at 486 nm and 17% PLQY at 500 nm]. Transmission electron microscopy (TEM) images of the as‐prepared CdTe show monodispersed NCs which exhibit cubic zinc blend structure. Moreover, time‐resolved PL decay and X‐ray photoelectron spectroscopy (XPS) results show the as‐prepared NCs have better surface modification by ligand, which makes these luminescent small CdTe NCs have higher photoluminescence quantum yield, compared with NCs synthesized under conventional conditions.     

Hydrothermal synthesis of highly luminescent CdTe quantum dots by adjusting precursors’ concentration and their conjunction with BSA as biological fluorescent probes

A study on hydrothermal synthesis of CdTe quantum dots, highly luminescent nanocrystals at a relatively lower temperature, via changing the concentration of the CdTe precursors, is described. The full width at half maximum ranged from 40 to 80 nm and quantum yield (QY) was detected to be 27.4% at room temperature. The as-prepared CdTe QDs were labeled with BSA for fluorescence probes without pretreatment. Conjunction experimental results suggested that the as-prepared CdTe QDs are suitable for the application of biotechnology.     

Band gap engineering of CdTe nanocrystals through chemical surface modification

We demonstrate band gap control of CdTe nanocrystals by selective surface modification using alkanethiol molecules. Both absorption and emission wavelengths can be tuned simply by mixing a dispersion of the nanocrystals with alkanethiol at room temperature, resulting in blue shifts in the optical spectra during reaction. The degree of blue shift depends on both the concentration of alkanethiols and the reaction time, thereby providing kinetic control over the emission peak wavelength of the nanocrystals in mild conditions. The observed spectral changes are suggested to be caused by a decrease in the size of the CdTe core through formation of CdTe1-x(SC10)x shells because of specific exchange of Te with alkanethiolates. The results reported herein provide a new band gap engineering scheme for semiconductor nanocrystals and offer opportunities for the design of ligand-stabilized semiconductor nanocrystals with tunable composition and optical properties.     

Preparation of monodisperse CdTe nanocrystals-SiO2 microspheres without ligands exchange

Fluorescent CdTe-SiO₂ composite microspheres were prepared by a sol–gel method without the exchange of surface ligands for the first time. We loaded CdTe nanocrystals (NCs) into the matrix of silica microspheres during the formation of composite spheres. In contrast to CdTe NCs in aqueous solutions, CdTe NCs in the composite microspheres revealed better stability while their fluorescence properties were retained due to the confined effects of silica matrix. In addition, we also investigated the dependency of properties of these composite spheres on such important synthesis factors as pH value, concentration and stabilizers during experiment procedure in details.     

Systematic study of the photoluminescence dependence of thiol-capped CdTe nanocrystals on the reaction conditions

A modified method to prepare high-quality thiol-capped CdTe nanocrystals (NCs) was reported in this paper. The experimental results showed that the different molar ratios of the ligands (thioglycolic acid) to monomers (Cd2+ ions) in the precursor solution played an important role in the photoluminescence (PL) quantum yield (QY) of the as-prepared CdTe NCs. When [ligand]/[monomer] = 1.2, the maximum fluorescent emission peak appeared in the orange-red window, and the PL QY increased up to 50% at room temperature without any postpreparative treatment. In the meantime, suitable reaction conditions were in favor of the optimization of the surface structure of NCs, resulting in the relatively high PL QY from green to red. In addition, some differences between hydrothermal synthesis and traditional aqueous synthesis of CdTe NCs were discussed.     

利用水相合成的CdTe纳米晶构建超晶格结构研究--纳米晶聚集体的调控

用巯基丙酸作稳定剂,在水溶液中制备了CdTe纳米晶.通过加入Cd2+、聚丙烯酸(PAA)以及长期放置分别得到了CdTe纳米晶的聚集体,改变Cd2+浓度或PAA加入量可以调控聚集体的尺寸.过量的Cd2+加速了聚集体的形成,通过与纳米晶表面羧酸根的静电相互作用,Cd2+成为连接不同CdTe纳米晶的“桥梁”.PAA链上大量的羧基与CdTe纳米晶有较强的配位相互作用,可以诱导纳米晶聚集.新制CdTe纳米晶在长期放置时,表面的羧基与Cd2+的相互作用导致纳米晶逐渐聚集.在聚集过程中纳米晶表面结构得到改善,并引起荧光增强.这些结果表明通过控制各种聚集条件,可以得到不同尺寸的聚集体.     

Amphiphilic ABC triblock copolymer-assisted synthesis of core/shell structured CdTe nanowires

A new type of amphiphilic ABC triblock copolymer, poly(acrylic acid)(33)-poly(styrene)(47)-poly(ethylene oxide)(113) (PAA(33)-PS(47)-PEO(113)), was designed to assist the synthesis of core/shell structured CdTe nanowires via a one-step synthetic route. The PAA block was adopted to capture cadmium ions as the precursor of CdTe. Due to the bivalent coordination of Cd(2+), the copolymer in dioxane/H(2)O formed micelles with Cd(2+)-polychelate cores. Then CdTe nanocrystals were obtained within the micelles after introduction of NaHTe into the micelle solution. Transmission electron microscopy experiments revealed that the CdTe nanocrystals obtained simultaneously formed "pearl-necklace" aggregates in solution possibly driven by dipole interactions between neighboring particles, and then single crystalline CdTe nanowires upon reflux. Accompanying this morphology change, a phase transition from cubic zinc blende to wurtzite structure was observed by selected-area electron diffraction. The aggregation of the PS block in dioxane with a certain amount of H(2)O enabled the PS blocks to form a densely packed shell on the CdTe nanowires whose typical size is 700-800 nm in length and 15-20 nm in width. The third block of PEO was employed to render the finally formed CdTe nanowires dispersibility.     

Synthesis of CdTe nanocrystals through program process of microwave irradiation

A novel method, the program process of microwave irradiation (PPMI), which commendably integrates good qualities of microwave irradiation and a programmed heating process, is presented to synthesize high-quality CdTe nanocrystals in aqueous solution. Microwave irradiation, which acts as the heating mode of PPMI, is highly favorable for a narrow size distribution and low concentration of surface defects of nanocrystals. On the other hand, two correlative processes (the first process and the second process) are utilized in PPMI to actualize the programmed heating process, which is an effective strategy to improve the quality of nanocrystals. Thus, a series (diameters approximately 2-4 nm) of highly luminescent (PLQY approximately 30-68%) CdTe nanocrystals were rapidly prepared (reaction time approximately 1-30 min) in aqueous phase through PPMI.     

室温水相合成CdTe/CdS核/壳结构量子点

开发了一种以聚乙烯吡咯烷酮为分散剂和稳定剂经条件温和的室温水相合成光谱可调的水溶性CdTe/CdS核/壳结构量子点的方法:向新鲜制备的CdTe量子点溶液中加入硫源,继续反应即可生成CdS壳层,通过控制硫源的浓度即可控制CdS壳层厚度,从而调节光谱性质和增强稳定性.采用XRD、TEM、HRTEM、荧光光谱以及紫外-可见光...     

Prototype of immunochromatographic assay strips using colloidal CdTe nanocrystals as biological luminescent label

Colloidal semiconductor nanocrystals have attracted considerable attention as a novel biological luminescent label. The bioinorganic conjugates of luminescent CdTe nanocrystals and protein, including CdTe/BSA (bovine serum albumin) and CdTe/MAB (mouse monoclonal antibody against hepatities B surface antigen), were formed via electrostatic/coordination self-assembly. Pure CdTe nanocrystals, CdTe/BSA and CdTe/MAB were used in the immunochromatographic assay experiments, respectively. And the results indicated that CdTe nanocrystals could be used and developed as a novel label with good stability, high sensitivity and facile determination of several analytes in immunochromatographic assay strips.     

聚合物主体中纳米CdTe的光致发光与电致发光性质

利用紫外和荧光光谱技术研究了共轭聚合物PPE4+分别在溶液和薄膜中与纳晶CdTe间的能量传递现象。通过静电层层组装技术制备了混杂有纳晶CdTe的PPE4+薄膜发光二极管,并测试了其电致发光性质。结果表明在溶液和薄膜中共轭聚合物PPE4+与纳晶CdTe间均能发生有效的能量转移,而共轭聚合物PPE4+在能量传递过程中起到分子天线的作用。     

Manipulation of aqueous growth of CdTe nanocrystals to fabricate colloidally stable one-dimensional nanostructures

The present article is devoted to systematically exploring the influence of various experimental variables, including the precursor concentration, the ligand nature, the counterion type, the Cd-to-Te molar ratio, pH, and temperature, on the aqueous growth of CdTe nanocrystals. The growth may be divided into two stages: the early fast growth stage and the later slow growth stage. The later stage is found to be dominated by Ostwald ripening (OR), being strongly dependent on all experimental conditions. In contrast, the early stage is dominated by adding monomers to nanocrystals, which may be dramatically accelerated by lowering precursor concentrations and using ligands with a molecular structure similar to that of thioglycolic acid (TGA). This fast growth stage is similar to that observed during organometallic growth of nanocrystals in hot organic media. On the basis of this finding, one-dimensional wurtzite CdTe nanostructures can be directly prepared in aqueous media by storing rather dilute precursor solution (2.4 mM with reference to ligand) in the presence of TGA at lower temperature (from room temperature to 80 degrees C). A low growth temperature is used to suppress OR during crystal growth. In addition, the simultaneous presence of both TGA-like ligand and 1-thioglycerol or 2-mercaptoethylamine leads to formation of colloidally stable 1D CdTe nanostructures with controlled aspect ratios.     

半导体CdTe纳米晶的合成及其光学性能

半导体CdTe纳米晶的合成及其光学性能;CdTe;纳米晶;光学性能     

5‐(2‐Mercaptoethyl)‐1H‐tetrazole: Facile Synthesis and Application for the Preparation of Water Soluble Nanocrystals and Their Gels

A facile method for the preparation of the novel capping ligand 5‐(2‐mercaptoethyl)‐1H‐tetrazole for the stabilization of water‐soluble nanocrystals was developed. This effective synthetic procedure is based on the cycloaddition of sodium azide to 3,3′‐dithiobis(propionitrile) followed by the reductive cleavage of a S?S bond with triphenylphosphine. The structure of the synthesized compound was confirmed by single‐crystal X‐ray analysis. A target tetrazole was successfully applied for the direct aqueous synthesis of CdTe and Au nanocrystals. CdTe nanocrystals capped with 5‐(2‐mercaptoethyl)‐1H‐tetrazole were found to reveal high photoluminescence efficiencies (up to 77 %). Nanocrystals capped with this tetrazole ligand are able to build 3D structures in a metal‐ion‐assisted gelation process in aqueous solution. Critical point drying of the as‐formed hydrogels allowed the preparation of the corresponding aerogels, while preserving the mesoporous structure.     

Optical absorption and valence band photoemission from uncapped CdTe nanocrystals

CdTe nanocrystals have been successfully fabricated by a mechanical alloying process. X-ray diffraction (XRD) patterns demonstrate that a single-phase CdTe compound with a zinc blende structure has been formed after ball milling elemental Cd and Te mixture powders for 27 h. The large broadening effect for the width of the {111} diffraction peak of uncapped CdTe nanocrystals on smaller size was observed in slowly scanned XRD patterns. The X-ray photoelectron spectrum was used to study the surface of the uncapped CdTe nanocrystals within both core level and valence band regions. The presence of tellurium oxide film on the surface of the uncapped CdTe nanocrystals has been detected in the X-ray photoelectron spectrum of the Te 3d core level, which was comparable to the observed amorphous oxide thin layer on the surface of uncapped CdTe nanocrystals in a high resolution transmission electron microscopy (HRTEM) image. The energy of the valence band maximum for uncapped CdTe powders blue shifts to the higher energy side with smaller particle sizes. In UV-visible optical absorption spectra of the suspension solution containing uncapped CdTe nanocrystals, the absorption peaks were locating within the ultraviolet region, which shifted toward the higher energy side with prolonged ball milling time. Both blue shifts of valence band maximum energy and absorption peaks with decreasing particle size provide a unique pathway to reveal the quantum confinement effect of uncapped CdTe nanocrystals.