Dimensional Control of Block Copolymer Nanofibers with a π‐Conjugated Core: Crystallization‐Driven Solution Self‐Assembly of Amphiphilic Poly(3‐hexylthiophene)‐b‐poly(2‐vinylpyridine)

With the aim of accessing colloidally stable, fiberlike, π‐conjugated nanostructures of controlled length, we have studied the solution self‐assembly of two asymmetric crystalline–coil, regioregular poly(3‐hexylthiophene)‐b‐poly(2‐vinylpyridine) (P3HT‐b‐P2VP) diblock copolymers, P3HT₂₃‐b‐P2VP₁₁₅ (block ratio=1:5) and P3HT₄₄‐b‐P2VP₁₁₅ (block ratio=ca. 1:3). The self‐assembly studies were performed under a variety of solvent conditions that were selective for the P2VP block. The block copolymers were prepared by using Cu‐catalyzed azide–alkyne cycloaddition reactions of azide‐terminated P2VP and alkyne end‐functionalized P3HT homopolymers. When the block copolymers were self‐assembled in a solution of a 50 % (v/v) mixture of THF (a good solvent for both blocks) and an alcohol (a selective solvent for the P2VP block) by means of the slow evaporation of the common solvent; fiberlike micelles with a P3HT core and a P2VP corona were observed by transmission electron microscopy (TEM). The average lengths of the micelles were found to increase as the length of the hydrocarbon chain increased in the P2VP‐selective alcoholic solvent (MeOH<iPrOH<nBuOH). Very long (>3 μm) fiberlike micelles were prepared by the dialysis of solutions of the block copolymers in THF against iPrOH. Furthermore the widths of the fibers were dependent on the degree of polymerization of the chain‐extended P3HT blocks. The crystallinity and π‐conjugated nature of the P3HT core in the fiberlike micelles was confirmed by a combination of UV/Vis spectroscopy, photoluminescence (PL) measurements, and wide‐angle X‐ray scattering (WAXS). Intense sonication (iPrOH, 1 h, 0 °C) of the fiberlike micelles formed by P3HT₂₃‐b‐P2VP₁₁₅ resulted in small (ca. 25 nm long) stublike fragments that were subsequently used as initiators in seeded growth experiments. Addition of P3HT₂₃‐b‐P2VP₁₁₅ unimers to the seeds allowed the preparation of fiberlike micelles with narrow length distributions (L_w/L_n <1.11) and lengths from about 100‐300 nm, that were dependent on the unimer‐to‐seed micelle ratio.     

Continuous and Segmented Semiconducting Fiber‐like Nanostructures with Spatially Selective Functionalization by Living Crystallization‐Driven Self‐Assembly

Fiber‐like π‐conjugated nanostructures are important components of flexible organic electronic and optoelectronic devices. To broaden the range of potential applications, one needs to control not only the length of these nanostructures, but the introduction of diverse functionality with spatially selective control. Here we report the synthesis of a crystalline‐coil block copolymer of oligo(p‐phenylenevinylene)‐b‐poly(2‐vinylpyridine) (OPV₅‐b‐P2VP₄₄), in which the basicity and coordinating/chelating ability of the P2VP segment provide a landscape for the incorporation of a variety of functional inorganic NPs. Through a self‐seeding strategy, we were able to prepare monodisperse fiber‐like micelles of OPV₅‐b‐P2VP₄₄ with lengths ranging from 50 to 800 nm. Significantly, the exposed two ends of OPV core of these fiber‐like micelles remained active toward further epitaxial deposition of OPV₅‐b‐PNIPAM₄₉ and OPV₅‐b‐P2VP₄₄ to generate uniform A‐B‐A and B‐A‐B‐A‐B segmented block comicelles with tunable lengths for each block. The P2VP domains in these (co‐)micelles can be selectively decorated with inorganic and polymeric nanoparticles as well as metal oxide coatings, to afford hybrid fiber‐like nanostructures. This work provides a versatile strategy toward the fabrication of narrow length dispersity continuous and segmented π‐conjugated OPV‐containing fiber‐like micelles with the capacity to be decorated in a spatially selective way with varying functionalities.     

Continuous and Segmented Semiconducting Fiber-like Nanostructures with Spatially Selective Functionalization by Living Crystallization-Driven Self-Assembly

Fiber-like π-conjugated nanostructures are important components of flexible organic electronic and optoelectronic devices. To broaden the range of potential applications, one needs to control not only the length of these nanostructures, but the introduction of diverse functionality with spatially selective control. Here we report the synthesis of a crystalline-coil block copolymer of oligo(p-phenylenevinylene)-b-poly(2-vinylpyridine) (OPV₅-b-P2VP₄₄), in which the basicity and coordinating/chelating ability of the P2VP segment provide a landscape for the incorporation of a variety of functional inorganic NPs. Through a self-seeding strategy, we were able to prepare monodisperse fiber-like micelles of OPV₅-b-P2VP₄₄ with lengths ranging from 50 to 800 nm. Significantly, the exposed two ends of OPV core of these fiber-like micelles remained active toward further epitaxial deposition of OPV₅-b-PNIPAM₄₉ and OPV₅-b-P2VP₄₄ to generate uniform A-B-A and B-A-B-A-B segmented block comicelles with tunable lengths for each block. The P2VP domains in these (co-)micelles can be selectively decorated with inorganic and polymeric nanoparticles as well as metal oxide coatings, to afford hybrid fiber-like nanostructures. This work provides a versatile strategy toward the fabrication of narrow length dispersity continuous and segmented π-conjugated OPV-containing fiber-like micelles with the capacity to be decorated in a spatially selective way with varying functionalities.     

Synthesis and characterization of amphiphilic block–graft MPEG‐b‐(PαN3CL‐g‐alkyne) degradable copolymers by ring‐opening polymerization and click chemistry

A straightforward strategy is proposed for the synthesis of novel, amphiphilic block–graft MPEG‐b‐(PαN₃CL‐g‐alkyne) degradable copolymers. First, the ring‐opening polymerization of α‐chloro‐ε‐caprolactone (αClCL) was initiated by hydroxy‐terminated macroinitiator monomethoxy poly(ethylene glycol) (MPEG) with SnOct₂ as the catalyst. In a second step, pendent chlorides were converted into azides by the reaction with sodium azide. Finally, various kinds of terminal alkynes were reacted with pendent azides by copper‐catalyzed Huisgen's 1,3‐dipolar cycloaddition, and thus a “click” reaction. These copolymers were characterized by differential scanning calorimetry (DSC), ¹H NMR, IR, and gel permeation chromatography. By fixing the length of the MPEG block and increasing the length of PαClCL (or PαN₃CL) block, an increase tendency in T_gs was observed. However, the copolymers of MPEG‐b‐PαClCL and MPEG‐b‐PαN₃CL were semicrystalline when the M_n of MPEG was above 2000 g mol^?1. The block–graft copolymers formed micelles in the aqueous phase with critical micelle concentrations (CMCs) in the range of 1.4–12.0 mg L^?1 depending on the composition of polymers. The lengths of hydrophilic segment influence the shape of the micelle. The mean hydrodynamic diameters of the micelles from dynamic light scattering were in the range of 90–160 nm. In vitro hydrolytic degradation of block–graft copolymers is faster than the corresponding block copolymers. The drug entrapment efficiency and the drug loading content of micelles depending on the composition of block–graft polymers were described. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4320–4331, 2008     

Monodisperse Cylindrical Micelles of Controlled Length with a Liquid‐Crystalline Perfluorinated Core by 1D “Self‐Seeding”

Precise control over the morphology and dimensions of block copolymer (BCP) micelles has attracted interest due to the potential of this approach to generate functional nanostructures. Incorporation of liquid crystalline (LC) block can provide additional ways to vary micellar morphologies, but the formation of uniform micelles with controllable dimensions from LC BCPs has not yet been realized. Herein, we report the preparation of monodisperse cylindrical micelles with a LC poly(2‐(perfluorooctyl)ethyl methacrylate (PFMA) core via a fragmentation‐thermal annealing (F‐TA) process, resembling the “self‐seeding” process of crystalline BCP micelles. The average length of the cylinders increases with annealing temperature, with a narrow length distribution (L_w/L_n<1.1). We also demonstrate the potential application of the cylinders with LC cores as a cargo‐carrier by the successful incorporation of a hydrophobic fluorescent dye tagged with a fluorooctyl group.     

Effect of polystyrene‐b‐poly(ethylene oxide) on self‐assembly of polystyrene‐b‐poly(N‐isopropylacrylamide) in aqueous solution

Mixed micelles of polystyrene‐b‐poly(N‐isopropylacrylamide) (PS‐b‐PNIPAM) and two polystyrene‐b‐poly(ethylene oxide) diblock copolymers (PS‐b‐PEO) with different chain lengths of polystyrene in aqueous solution were prepared by adding the tetrahydrofuran solutions dropwise into an excess of water. The formation and stabilization of the resultant mixed micelles were characterized by using a combination of static and dynamic light scattering. Increasing the initial concentration of PS‐b‐PEO in THF led to a decrease in the size and the weight average molar mass (〈M_w〉) of the mixed micelles when the initial concentration of PS‐b‐ PNIPAM was kept as 1 × 10^?3 g/mL. The PS‐b‐PEO with shorter PS block has a more pronounced effect on the change of the size and 〈M_w〉 than that with longer PS block. The number of PS‐b‐PNIPAM in each mixed micelle decreased with the addition of PS‐b‐PEO. The average hydrodynamic radius 〈R_h〉 and average radius of gyration 〈R_g〉 of pure PS‐b‐PNIPAM and mixed micelles gradually decreased with the increase in the temperature. Both the pure micelles and mixed micelles were stable in the temperature range of 18 °C–39 °C. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1168–1174, 2010     

Well‐defined amphiphilic polymethylene‐b‐poly(acrylic acid) diblock copolymers: New synthetic strategy and their self‐assembly

Well‐defined amphiphilic polymethylene‐b‐poly (acrylicacid) diblock copolymers have been synthesized via a new strategy combining polyhomologation and atom transfer radical polymerization (ATRP). Hydroxyl‐terminated polymethylenes (PM‐OH) with different molecular weights and narrow molecular weight distribution are obtained through the polyhomologation of dimethylsulfoxonium methylides following quantitative oxidation via trimethylamine‐N‐oxide dihydrate. Subsequently, polymethylene‐based macroinitiators (PM‐MIs M_n = 1,300 g mol^?1 [M_w/M_n = 1.11] and M_n = 3,300 g mol^?1 [M_w/M_n = 1.04]) are synthesized by transformation of terminal hydroxyl group of PM‐OH to α‐haloester in ～100% conversion. ATRPs of tert‐butyl acrylate (t‐BuA) are then carried out using PM‐MIs as initiator to construct PM‐b‐P(t‐BuA) diblock copolymers with controllable molecular weight (M_n = 8,800–15,800 g mol^?1 M_w/M_n = 1.04–1.09) and different weight ratio of PM/P(t‐BuA) segment (1:1.7–1:11.2). The amphiphilic PM‐b‐PAA diblock copolymers are finally prepared by hydrolysis of PM‐b‐P(t‐BuA) copolymers and their self‐assembly behavior in water is preliminarily investigated via the determination of critical micelle concentrations, dynamic light scattering, and transmission electron microscope (TEM). © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Polymeric Micelle Assembly for the Smart Synthesis of Mesoporous Platinum Nanospheres with Tunable Pore Sizes

A facile method for the fabrication of well‐dispersed mesoporous Pt nanospheres involves the use of a polymeric micelle assembly. A core–shell–corona type triblock copolymer [poly(styrene‐b‐2‐vinylpyridine‐b‐ethylene oxide), PS‐b‐P2VP‐b‐PEO] is employed as the pore‐directing agent. Negatively charged PtCl₄^2? ions preferably interact with the protonated P2VP⁺ blocks while the free PEO chains prevent the aggregation of the Pt nanospheres. The size of the mesopores can be finely tuned by varying the length of the PS chain. Furthermore, it is demonstrated that the metallic mesoporous nanospheres thus obtained are promising candidates for applications in electrochemistry.     

RAFT polymerization of linear ABC triblock copolymer P<Emphasis Type="Italic">t</Emphasis>BA-<Emphasis Type="Italic">b</Emphasis>-PS-<Emphasis Type="Italic">b</Emphasis>-P2VP and regulation of its hierarchical self-assembly structure in solution

Linear ABC triblock copolymer PtBA₁₅₄-b-PS₃₀₀-b-P2VP₂₄₀ was successfully synthesized by RAFT polymerization. Block copolymer micelles were prepared by the two-step hierarchical self-assembly process. Size exclusion chromatography and ¹H NMR were used to characterize the structure of samples. Morphologies and size of micelles were determined by transmission electron microscope. The results showed that the densely dispersed spherical micelles of PtBA₁₅₄-b-PS₃₀₀-b-P2VP₂₄₀ were obtained in the first step of the hierarchical self-assembly process. In the second step, core-compartmentalized micelle strings with different lengths and distribution densities were obtained when the primary self-assembled solution was dialyzed in distilled water with pH ≈ 3. When distilled water with pH ≈ 3 was added drop-wise to this solution, uniformly dispersed spherical core-compartmentalized micelles of PtBA₁₅₄-b-PS₃₀₀-b-P2VP₂₄₀ were prepared. Thus, hierarchical self-assembly structure of linear ABC triblock copolymer was obtained successfully and the preparation of uniformly dispersed spherical micelles of triblock copolymers was realized simply by changing the secondary self-assembly methods.     

Effect of binary block‐selective solvents on self‐assembly of ABA triblock copolymer in dilute solution

We have studied the self‐assembly of the ABA triblock copolymer (P4VP‐b‐PS‐b‐P4VP) in dilute solution by using binary block‐selective solvents, that is, water and methanol. The triblock copolymer was first dissolved in dioxane to form a homogeneous solution. Subsequently, a given volume of selective solvent was added slowly to the solution to induce self‐assembly of the copolymer. It was found that the copolymer (P4VP₄₃‐b‐PS₃₆₆‐b‐P4VP₄₃) tended to form spherical aggregate or bilayer structure when we used methanol or water as the single selective solvent, respectively. However, the aggregates with various nanostructures were obtained by using mixtures of water and methanol as the block‐selective solvents. The aggregate structure changed from sphere to rod, vesicle, and then to bilayer by changing water content in the block‐selective solvent from 0 to 100%. Moreover, it was found that the vesicle size could be well controlled by changing the copolymer content in the solution. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1536–1545, 2008     

Synthesis and characterization of amphiphilic poly(N‐vinyl pyrrolidone)‐b‐poly(ε‐caprolactone) copolymers by a combination of cobalt‐mediated radical polymerization and ring‐opening polymerization

An amphiphilic block copolymer of poly(N‐vinyl pyrrolidone)‐b‐poly(ε‐caprolactone) (PVP‐b‐PCL) was synthesized by a combination of cobalt‐mediated radical polymerization (CMRP) and ring‐opening polymerization (ROP). The micellar characteristics of this copolymer were subsequently investigated. PVP (M_n = 11,400, M_w/M_n = 1.32) was synthesized at 20 °C via CMRP using a molar ratio of [VP]₀/[V‐70]₀/[Co]₀ = 150/8/1. The PVP was then reacted with 2,2′‐azobis[2‐methyl‐N‐(2‐hydroxyethyl)propionamide] (VA‐086) to modify its cobalt complex chain end to a hydroxyl group. The cobalt (Co) content in the resulting PVP‐OH was 1.2 ppm, indicating that all of the covalent Co? C bonds were cleaved and reacted with VA‐086, and that the separated cobalt complexes were successfully removed. The ROP of CL was subsequently carried out using the produced PVP‐OH as a macroinitiator at 110 °C. The GPC trace of PVP‐b‐PCL was monomodal without any tailing caused by the residual PVP‐OH, indicating that the initiation efficiency was very high. The critical micelle concentration (CMC) of PVP‐b‐PCL (M_n = 18,000, M_w/M_n = 1.35) was 0.015 mg/mL. The PVP‐b‐PCL micelles were spherical in shape with an average diameter of 105 nm. The nanosized PVP‐b‐PCL micelles show promise as novel drug carriers in biomedical and pharmaceutical applications. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3078–3085, 2009     

Synthesis of poly(4-vinyl pyridine-b-methyl methacrylate) by MAMA-SG1 initiated sequential polymerization and formation of metal loaded block copolymer inverse micelles

Well-defined poly(4-vinylpyridine) (P4VP) was synthesised by nitroxide-mediated radical polymerization using the BlocBuilder MAMA-SG1. The controlled character of the polymerization was confirmed by kinetic measurements and linear increase of the molar mass with monomer conversion. Poly(4-vinylpyridine) terminated with SG1 was then used as macroinitiator and chain extended to form poly(4-vinylpyridine-b-methyl methacrylate) and poly(4-vinylpyridine-b-(methyl methacrylate-co-styrene)) block copolymers. These block copolymers spontaneously organized into spherical inverse micelles in THF with critical micelle concentrations of 0.1 mg/mL for poly(4VP₁₉₀-b-MMA₉₁) and 0.01 mg/mL for poly(4VP₁₉₀-b-(MMA₅₇-co-S₁₈)) and sizes of 70 and 130 nm (DLS), respectively. The inverse micelles were loaded with copper(II)acetate leading to a slight increase in micelle size. The uniform structure of the inverse micelles was confirmed by FeSEM images, while the presence of copper in the micelle core was established by energy-dispersive X-ray spectroscopy (EDX) and FTIR spectroscopy.     

Synthesis and self‐assembly morphologies of amphiphilic multiblock copolymers [poly(ethylene oxide)‐b‐polystyrene]n via trithiocarbonate‐embedded PEO macro‐RAFT agent

An amphiphilic multiblock copolymer [poly(ethylene oxide)‐b‐polystyrene]_n [(PEO‐b‐PS)_n] is synthesized by using trithiocarbonate‐embedded PEO as macro‐RAFT agent. PEO with four inserted trithiocarbonate (M_n = 9200 and M_w/M_n = 1.62) groups is prepared first by condensation of α, ω‐dihydroxyl poly(ethylene oxide) with S, S′‐Bis(α, α′‐dimethyl‐α″‐acetic acid)‐trithiocarbonate (BDATC) in the presence of pyridine, then a series of goal copolymers with different St units (varied from 25 to 218 per segment) are obtained by reversible addition‐fragmentation chain transfer (RAFT) polymerization. The synthesis process is monitored by size exclusion chromatography (SEC), ¹H NMR and FT‐IR. The self‐assembled morphologies of the copolymers are strongly dependent of the length of PS block chains when the chain length of PEO is fixed, some new morphologies as large leaf‐like aggregates (LLAs), large octopus‐like aggregates (LOAs), and coarse‐grain like micelles (CGMs) are observed besides some familiar aggregates as large compound vesicles (LCVs), lamellae and rods, and the effect of water content on the morphologies is also discussed. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6071–6082, 2006     

RAFT synthesis of polystyrene‐block‐poly(polyethylene glycol monomethyl ether acrylate) for zinc phthalocyanine‐loaded polymeric micelles as photodynamic therapy photosensitizers

A series of polystyrene‐block‐poly(polyethylene glycol monomethyl ether acrylate) (PSt_m‐b‐PPEGA_n) polymers were systematically synthesized as carriers for zinc phthalocyanine (ZnPc) for photodynamic therapy via reversible addition and fragmentation chain transfer polymerization. The degree of polymerization of the styrene (m) and PEGA units (n) of the resulting block copolymers were characterized to be n = 174, 40, and 18 for m = 52; and n = 200, 84, and 31 for m = 30. All the block copolymers formed micelles in water. The critical micelle concentration (CMC) of the PSt_m‐b‐PPEGA_n was determined by fluorometry using pyrene as a hydrophobic probe. The CMC value increased from 4.5 to 20 mg·L⁻¹ with an increase in the mole fraction of PEGA units. The median diameters of the micelles increased from 19 to 31 nm for PSt₅₂‐b‐PPEGA_n and from 15 to 23 nm for PSt₃₀‐b‐PPEGA_n with increasing n value. ZnPc‐loaded micelles were prepared by dialysis of the block copolymer in the presence of ZnPc followed by removal of large aggregates by filtration. The encapsulation efficiency was dramatically changed in the range of 0–68%. The light‐dose‐dependent cytotoxicity of the ZnPc‐loaded PSt₃₀‐b‐PPEGA₂₀₀ was clearly established in HeLa cell lines; while no cytotoxicity was confirmed under the dark. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 560–570     

Dual Soft‐Template System Based on Colloidal Chemistry for the Synthesis of Hollow Mesoporous Silica Nanoparticles

A new dual soft‐template system comprising the asymmetric triblock copolymer poly(styrene‐b‐2‐vinyl pyridine‐b‐ethylene oxide) (PS‐b‐P2VP‐b‐PEO) and the cationic surfactant cetyltrimethylammonium bromide (CTAB) is used to synthesize hollow mesoporous silica (HMS) nanoparticles with a center void of around 17 nm. The stable PS‐b‐P2VP‐b‐PEO polymeric micelle serves as a template to form the hollow interior, while the CTAB surfactant serves as a template to form mesopores in the shells. The P2VP blocks on the polymeric micelles can interact with positively charged CTA⁺ ions via negatively charged hydrolyzed silica species. Thus, dual soft‐templates clearly have different roles for the preparation of the HMS nanoparticles. Interestingly, the thicknesses of the mesoporous shell are tunable by varying the amounts of TEOS and CTAB. This study provides new insight on the preparation of mesoporous materials based on colloidal chemistry.     

Using the reversible addition–fragmentation chain transfer process to synthesize core‐crosslinked micelles

Poly(2‐hydroxyethyl acrylate)–poly(n‐butyl acrylate) block copolymers were synthesized with the reversible addition–fragmentation chain transfer (RAFT) process. The block copolymers were synthesized successfully with either poly(2‐hydroxyethyl acrylate) or poly(n‐butyl acrylate) macro‐RAFT agents. The resulting block copolymers had narrow molecular weight distributions (polydispersity index = 1.3–1.4). Copolymer self‐aggregation in water yielded micelles, with the hydrodynamic diameter (D_h) values of the aggregates dependent on the length of both blocks according to D_h ～ N_BA^1.17N_HEA^0.57, where N_BA is the number of repeating units of n‐butyl acrylate and N_HEA is the number of repeating units of 2‐hydroxyethyl acrylate. The micelles were subsequently stabilized via chain extension of the block copolymer with a crosslinking agent. The successful chain extension in a micellar system was confirmed by an increase in the molecular weight, which was detected with membrane osmometry. The crosslinked particles showed noticeably different aggregation behavior in diverse solvent systems. The uncrosslinked micelles formed by the block copolymer (N_HEA = 260, N_BA = 75) displayed a definite critical micelle concentration at 5.4 × 10^?4 g L^?1 in aqueous solutions. However, upon crosslinking, the critical micelle concentration transition became obscure. © 2006Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2177–2194, 2006     

Lactic acid‐ and carbonate‐based crosslinked polymeric micelles for drug delivery

Our objective was to synthesize and evaluate lactic acid‐ and carbonate‐based biodegradable core‐ and core‐corona crosslinkable copolymers for anticancer drug delivery. Methoxy poly(ethylene glycol)‐b‐poly(carbonate‐co‐lactide‐co‐5‐methyl‐5‐allyloxycarbonyl‐1,3‐dioxane‐2‐one) [mPEG‐b‐P(CB‐co‐LA‐co‐MAC)] and methoxy poly(ethylene glycol)‐b‐poly(acryloyl carbonate)‐b‐poly(carbonate‐co‐lactide) [mPEG‐b‐PMAC‐b‐P(CB‐co‐LA)] copolymers were synthesized by ring‐opening polymerization of LA, CB, and MAC using mPEG as an macroinitiator and 1,8‐diazabicycloundec‐7‐ene as a catalyst. These amphiphilic copolymers which exhibited low polydispersity and critical micelle concentration values (0.8–1 mg/L) were used to prepare micelles with or without drug and stabilized by crosslinking via radical polymerization of double bonds introduced in the core and interface to improve stability. mPEG₁₁₄‐b‐P(CB₈‐co‐LA₃₅‐co‐MAC_2.5) had a higher drug encapsulation efficiency (78.72% ± 0.15%) compared to mPEG₁₁₄‐b‐PMAC_2.5‐b‐P(CB₉‐co‐LA₃₉) (20.29% ± 0.11%).¹H NMR and IR spectroscopy confirmed successful crosslinking (～70%) while light scattering and transmission electron microscopy were used to determine micelle size and morphology. Crosslinked micelles demonstrated enhanced stability against extensive dilution with aqueous solvents and in the presence of physiological simulating serum concentration. Furthermore, bicalutamide‐loaded crosslinked micelles were more potent compared to non‐crosslinked micelles in inhibiting LNCaP cell proliferation irrespective of polymer type. Finally, these results suggest crosslinked micelles to be promising drug delivery vehicles for chemotherapy. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Three‐arm star block copolymers of ε‐caprolactone and acrylic acid: Synthesis and micellization behavior

A series of well‐defined three‐arm star poly(ε‐caprolactone)‐b‐poly(acrylic acid) copolymers having different block lengths were synthesized via the combination of ring‐opening polymerization (ROP) and atom transfer radical polymerization (ATRP). First, three‐arm star poly(ε‐caprolactone) (PCL) (M_n = 2490–7830 g mol^?1; M_w/M_n = 1.19–1.24) were synthesized via ROP of ε‐caprolactone (ε‐CL) using tris(2‐hydroxyethyl)cynuric acid as three‐arm initiator and stannous octoate (Sn(Oct)₂) as a catalyst. Subsequently, the three‐arm macroinitiator transformed from such PCL in high conversion initiated ATRPs of tert‐butyl acrylate (^tBuA) to construct three‐arm star PCL‐b‐P^tBuA copolymers (M_n = 10,900–19,570 g mol^?1; M_w/M_n = 1.14–1.23). Finally, the three‐arm star PCL‐b‐PAA copolymer was obtained via the hydrolysis of the PtBuA segment in three‐arm star PCL‐b‐P^tBuA copolymers. The chain structures of all the polymers were characterized by gel permeation chromatography, proton nuclear magnetic resonance (¹H NMR), and Fourier transform infrared spectroscopy. The aggregates of three‐arm star PCL‐b‐PAA copolymer were studied by the determination of critical micelles concentration and transmission electron microscope. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Investigations on a detergent system with rodlike micelles

Conductivity, kinetic, static and dynamic light scattering, electric birefringence and rheological measurements were carried out on aqueous solutions of Tetradecylpyridinium-n-Heptanesulfonate (C₁₄PyC₇SO₃) up to high concentrations. In dilute solutions between the critical micelle concentration (cmc) and another characteristic concentration (c _t) spherical micelles were detected whose radii were independent of detergent concentration and equal to the length of a detergent molecule; the aggregation numbern of these micelles of about 100 monomers per micelle was also in agreement with the existence of normal spherical micelles of aC ₁₄-detergent.Above the concentrationc _t, the spherical micelles were found to grow to rodlike aggregates whose short axis was still independent of concentration and equal to the length of a monomer, while the lengthsL of the rods increased with increasing detergent concentration. When the lengthsL of the rods became comparable with the mean distancea between them, the starting interaction between the rods slowed down their growth. In this concentration range of overlapping rods, the data could be evaluated with a recently developed theory by Doi and Edwards for stiff rods. The rods reached finally a maximum length of about 500 å and decreased again in size upon further increase of concentration when the overlap ratioL/a reached a value of about 1,5.