Continuous and Segmented Semiconducting Fiber‐like Nanostructures with Spatially Selective Functionalization by Living Crystallization‐Driven Self‐Assembly

Fiber‐like π‐conjugated nanostructures are important components of flexible organic electronic and optoelectronic devices. To broaden the range of potential applications, one needs to control not only the length of these nanostructures, but the introduction of diverse functionality with spatially selective control. Here we report the synthesis of a crystalline‐coil block copolymer of oligo(p‐phenylenevinylene)‐b‐poly(2‐vinylpyridine) (OPV₅‐b‐P2VP₄₄), in which the basicity and coordinating/chelating ability of the P2VP segment provide a landscape for the incorporation of a variety of functional inorganic NPs. Through a self‐seeding strategy, we were able to prepare monodisperse fiber‐like micelles of OPV₅‐b‐P2VP₄₄ with lengths ranging from 50 to 800 nm. Significantly, the exposed two ends of OPV core of these fiber‐like micelles remained active toward further epitaxial deposition of OPV₅‐b‐PNIPAM₄₉ and OPV₅‐b‐P2VP₄₄ to generate uniform A‐B‐A and B‐A‐B‐A‐B segmented block comicelles with tunable lengths for each block. The P2VP domains in these (co‐)micelles can be selectively decorated with inorganic and polymeric nanoparticles as well as metal oxide coatings, to afford hybrid fiber‐like nanostructures. This work provides a versatile strategy toward the fabrication of narrow length dispersity continuous and segmented π‐conjugated OPV‐containing fiber‐like micelles with the capacity to be decorated in a spatially selective way with varying functionalities.     

Dimensional Control of Block Copolymer Nanofibers with a π‐Conjugated Core: Crystallization‐Driven Solution Self‐Assembly of Amphiphilic Poly(3‐hexylthiophene)‐b‐poly(2‐vinylpyridine)

With the aim of accessing colloidally stable, fiberlike, π‐conjugated nanostructures of controlled length, we have studied the solution self‐assembly of two asymmetric crystalline–coil, regioregular poly(3‐hexylthiophene)‐b‐poly(2‐vinylpyridine) (P3HT‐b‐P2VP) diblock copolymers, P3HT₂₃‐b‐P2VP₁₁₅ (block ratio=1:5) and P3HT₄₄‐b‐P2VP₁₁₅ (block ratio=ca. 1:3). The self‐assembly studies were performed under a variety of solvent conditions that were selective for the P2VP block. The block copolymers were prepared by using Cu‐catalyzed azide–alkyne cycloaddition reactions of azide‐terminated P2VP and alkyne end‐functionalized P3HT homopolymers. When the block copolymers were self‐assembled in a solution of a 50 % (v/v) mixture of THF (a good solvent for both blocks) and an alcohol (a selective solvent for the P2VP block) by means of the slow evaporation of the common solvent; fiberlike micelles with a P3HT core and a P2VP corona were observed by transmission electron microscopy (TEM). The average lengths of the micelles were found to increase as the length of the hydrocarbon chain increased in the P2VP‐selective alcoholic solvent (MeOH<iPrOH<nBuOH). Very long (>3 μm) fiberlike micelles were prepared by the dialysis of solutions of the block copolymers in THF against iPrOH. Furthermore the widths of the fibers were dependent on the degree of polymerization of the chain‐extended P3HT blocks. The crystallinity and π‐conjugated nature of the P3HT core in the fiberlike micelles was confirmed by a combination of UV/Vis spectroscopy, photoluminescence (PL) measurements, and wide‐angle X‐ray scattering (WAXS). Intense sonication (iPrOH, 1 h, 0 °C) of the fiberlike micelles formed by P3HT₂₃‐b‐P2VP₁₁₅ resulted in small (ca. 25 nm long) stublike fragments that were subsequently used as initiators in seeded growth experiments. Addition of P3HT₂₃‐b‐P2VP₁₁₅ unimers to the seeds allowed the preparation of fiberlike micelles with narrow length distributions (L_w/L_n <1.11) and lengths from about 100‐300 nm, that were dependent on the unimer‐to‐seed micelle ratio.     

Stimuli-responsive behavior of complex micelles based on double hydrophilic block copolymer and fluorescent indicator

The double hydrophilic block copolymer poly(ethylene glycol mono-methyl ether)-block-poly(4-vinylpyridine) (mPEG₄₃-b-P4VP₁₁₅) was synthesized by atom transfer radical polymerization. The structure, molecular weight and molecular weight distribution of mPEG₄₃-b-P4VP₁₁₅ were characterized by ¹H-NMR and gel permeation chromatography combined with laser light scattering technique. The complex micelles based on mPEG₄₃-b-P4VP₁₁₅ and the disodium 2-naphthol-3,6-disulfonate were obtained in acid aqueous solution. The morphologies of the complex micelles were observed by transmission electron microscopy. The revertible temperature and pH-responsive behaviors of complex micelles were studied by dynamic light scattering and fluorescence techniques.     

RAFT polymerization of linear ABC triblock copolymer P<Emphasis Type="Italic">t</Emphasis>BA-<Emphasis Type="Italic">b</Emphasis>-PS-<Emphasis Type="Italic">b</Emphasis>-P2VP and regulation of its hierarchical self-assembly structure in solution

Linear ABC triblock copolymer PtBA₁₅₄-b-PS₃₀₀-b-P2VP₂₄₀ was successfully synthesized by RAFT polymerization. Block copolymer micelles were prepared by the two-step hierarchical self-assembly process. Size exclusion chromatography and ¹H NMR were used to characterize the structure of samples. Morphologies and size of micelles were determined by transmission electron microscope. The results showed that the densely dispersed spherical micelles of PtBA₁₅₄-b-PS₃₀₀-b-P2VP₂₄₀ were obtained in the first step of the hierarchical self-assembly process. In the second step, core-compartmentalized micelle strings with different lengths and distribution densities were obtained when the primary self-assembled solution was dialyzed in distilled water with pH ≈ 3. When distilled water with pH ≈ 3 was added drop-wise to this solution, uniformly dispersed spherical core-compartmentalized micelles of PtBA₁₅₄-b-PS₃₀₀-b-P2VP₂₄₀ were prepared. Thus, hierarchical self-assembly structure of linear ABC triblock copolymer was obtained successfully and the preparation of uniformly dispersed spherical micelles of triblock copolymers was realized simply by changing the secondary self-assembly methods.     

Micellization and luminescence of PEG-b-P4VP/Europium(III)/1,10-phenanthroline complex

Luminescent micelles were prepared through the self-assembly of poly(ethylene glycol)-block-poly(4-vinylpyridine) (PEG₁₁₄-b-P4VP₆₁) and Europium(III) (Eu(III)), with P4VP/Eu(III) as the core, and PEG as the corona. 1,10-phenanthroline (Phen) was assembled into the core of the micelles to sensitize the luminescence. The presence of Phen results into the increasing of apparent average hydrodynamic diameters (D_h^app {\hbox{D}}_{\rm{h}}^{\rm{app}} ) of the micelles. All Eu(III)-containing micelles emitted the characteristic fluorescence of Eu(III). The intensity of luminescence increased with the presence and the increasing quantity of Phen in the complex micelles due to the effective energy transferring of Phen in the “antenna effect”.     

Multiple morphological micelles formed from the self-assembly of poly(styrene)-b-poly(4-vinylpyridine) containing cobalt dodecyl benzene sulfonate

A series of supramolecular block copolymers were prepared using poly(styrene)-b-poly(4-vinylpyridine)(PS-b-P4VP) which coordinated with cobalt dodecyl benzene sulfonate (Co(DBS)₂) in tetrahydrofuran (THF). Fourier transformation infrared spectroscopy (FTIR), UV-vis absorption spectroscopy (UV) and differential scanning calorimetry (DSC) showed that Co(DBS)₂ coordinated to the lone electron pairs of the pyridine nitrogens in the P4VP block and leaded to complexes. The supramolecular block copolymers could self-assemble into nanosized micelles with different shapes and dimensions in THF, depending on the number of Co(DBS)₂ groups per 4-vinylpyridine (repeat unit was denoted by n) and the ratio between PS block length and P4VP block length. Transmission electron microscopy (TEM) results showed that when the number of repeat units of P4VP was more than that of PS, micelles with different interesting shapes such as spheres, rods, vesicles, large compound vesicles (LCVs) and the large compound micelles (LCMs) were observed if increasing the content of the Co(DBS)₂ in PS-b-P4VP copolymer/THF solution; When the number of repeat units of P4VP was less than that of PS, the micelle morphologies changed from spheres to rods, bi-layer, and LCMs if the Co(DBS)₂ content was increased progressively.     

A strategy to stabilize the confined chiral TPPS J-aggregate by ionic block copolymer

Poly(ethylene glycol)-block-poly(4-vinylpyridine) (PEG-b-P4VP), with a poly-cation building block, forms electrostatic complexes with the J-type chiral pre-aggregates of 5,10,15,20-tetrakis (4-sulfonatophenyl) porphyrin (TPPS) in the water inner-phase of the TX-100 reverse microemulsion at pH 1.0 using l-tryptophan as the chiral source. The complexation with PEG₄₅-b-P4VP₆ prevents these chiral pre-aggregates from contacting with each other during the percolation of the droplets, so as to stabilize the circular dichroism intensity and the size of the complexes. After breaking the microemulsion, the PEG₄₅-b-P4VP₆/TPPS aggregates are also prevented from further clustering at optimized ratio of [polymer]/[TPPS], so these complex aggregates disperses in acetone with spherical morphology and well maintain their size and chiral signal for further storing. This method can be considered as one of extracting the confined chiral aggregates as an isolated form apart from the reverse microemulsion.     

Synthesis of poly(4-vinyl pyridine-b-methyl methacrylate) by MAMA-SG1 initiated sequential polymerization and formation of metal loaded block copolymer inverse micelles

Well-defined poly(4-vinylpyridine) (P4VP) was synthesised by nitroxide-mediated radical polymerization using the BlocBuilder MAMA-SG1. The controlled character of the polymerization was confirmed by kinetic measurements and linear increase of the molar mass with monomer conversion. Poly(4-vinylpyridine) terminated with SG1 was then used as macroinitiator and chain extended to form poly(4-vinylpyridine-b-methyl methacrylate) and poly(4-vinylpyridine-b-(methyl methacrylate-co-styrene)) block copolymers. These block copolymers spontaneously organized into spherical inverse micelles in THF with critical micelle concentrations of 0.1 mg/mL for poly(4VP₁₉₀-b-MMA₉₁) and 0.01 mg/mL for poly(4VP₁₉₀-b-(MMA₅₇-co-S₁₈)) and sizes of 70 and 130 nm (DLS), respectively. The inverse micelles were loaded with copper(II)acetate leading to a slight increase in micelle size. The uniform structure of the inverse micelles was confirmed by FeSEM images, while the presence of copper in the micelle core was established by energy-dispersive X-ray spectroscopy (EDX) and FTIR spectroscopy.     

Hybridization of poly(4-vinyl pyridine)-b-polystyrene-b-poly(4-vinyl pyridine) aggregates in dioxane/water solution

Self-assembly of binary blends of two triblock copolymers of poly(4-vinyl pyridine)-b-polystyrene-b-poly(4-vinyl pyridine), i.e., P4VP₄₃-b-PS₂₆₀-b-P4VP₄₃ (P1) and P4VP₄₃-b-PS₃₆₆-b-P4VP₄₃ (P2), in dioxane/water solution was studied. These two triblock copolymers individually tend to form vesicles (P2) and cylindrical micelles (P1) in dilute solution. It was found that copolymer components in the blend, sample preparation method, and annealing time had significant effect on hybridization aggregate morphology. By increasing P1 content in the copolymer blends, fraction of looped and stretched cylinders increased, while fraction of bilayers decreased. Nearly no bilayer was observed when P1 content was above 85 wt%. On the other hand, fraction of cylinders decreased while fraction of bilayers increased with the increase of P2 content in copolymer blends. Lamellar structures were obtained, when P2 content was 60 wt% in the copolymer blends, whereas cylinders were seldom found when P2 content was above 80 wt%. These results indicate that P1 and P2 copolymer molecules cooperatively participate in the formation of cylinders and vesicles. Some exotic structures, such as lamellae with protruding cylinders (LPC), incomplete vesicles with protruding cylinders (VPC), and cylindrical bilayers, have been kinetically trapped. These structures may result from intramicellar fusion processes in cylindrical micelles. The striking structures represent a compromise between bilayer and cylindrical geometries.     

Coassembly of Metal and Titanium Dioxide Nanocrystals Directed by Monolayered Block Copolymer Inverse Micelles for Enhanced Photocatalytic Performance

Functional nanostructures of self‐assembled block copolymers (BCPs) incorporated with various inorganic nanomaterials have received considerable attention on account of their many potential applications. Here we demonstrate the two‐dimensional self‐assembly of anisotropic titanium dioxide (TiO₂) nanocrystals (NCs) and metal nanoparticles (NPs) directed by monolayered poly(styrene)‐block‐poly(4‐vinylpyridine) (PS‐b‐P4VP) copolymer inverse micelles. The independent position‐selective assembly of TiO₂ NCs and silver nanoparticles (AgNPs) preferentially in the intermicelle corona regions and the core of micelles, respectively, for instance, was accomplished by spin‐coating a mixture solution of PS‐b‐P4VP and ex situ synthesized TiO₂ NCs, followed by the reduction of Ag salts coordinated in the cores of micelles into AgNPs. Hydrophobic TiO₂ NCs with a diameter and length of approximately 3 nm and 20–30 nm, respectively, were preferentially sequestered in the intermicelle nonpolar PS corona regions energetically favorable with the minimum entropic packing penalty. Subsequent high‐temperature annealing at 550 °C not only effectively removed the block copolymer but also transformed the TiO₂ NCs into connected nanoparticles, thus leading to a two‐dimensionally ordered TiO₂ network in which AgNPs were also self‐organized. The enhanced photocatalytic activity of the AgNP‐decorated TiO₂ networks by approximately 27 and 44 % over that of Ag‐free TiO₂ networks and randomly deposited TiO₂ nanoparticles, respectively, was confirmed by the UV degradation property of methylene blue.     

Effect of binary block‐selective solvents on self‐assembly of ABA triblock copolymer in dilute solution

We have studied the self‐assembly of the ABA triblock copolymer (P4VP‐b‐PS‐b‐P4VP) in dilute solution by using binary block‐selective solvents, that is, water and methanol. The triblock copolymer was first dissolved in dioxane to form a homogeneous solution. Subsequently, a given volume of selective solvent was added slowly to the solution to induce self‐assembly of the copolymer. It was found that the copolymer (P4VP₄₃‐b‐PS₃₆₆‐b‐P4VP₄₃) tended to form spherical aggregate or bilayer structure when we used methanol or water as the single selective solvent, respectively. However, the aggregates with various nanostructures were obtained by using mixtures of water and methanol as the block‐selective solvents. The aggregate structure changed from sphere to rod, vesicle, and then to bilayer by changing water content in the block‐selective solvent from 0 to 100%. Moreover, it was found that the vesicle size could be well controlled by changing the copolymer content in the solution. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1536–1545, 2008     

Formation of gold nanoparticles in diblock copolymer micelles with various reducing agents

Gold nanoparticles (Au NPs) were prepared by the reduction of HAuCl₄ acid incorporated into the polar core of poly(styrene)-block-poly(2-vinylpyridine) (PS-b-P2VP) copolymer micelles dissolved in toluene. The formation of Au NPs was controlled using three reducing agents with different strengths: hydrazine (HA), triethylsilane (TES), and potassium triethylborohydride (PTB). The formation of Au NPs was followed by transmission electron microscopy, UV–Vis spectroscopy, isothermal titration calorimetry (ITC), and dynamic light scattering (DLS). It was found that the strength of the reducing agent determined both the size and the rate of formation of the Au NPs. The average diameters of the Au NPs prepared by reduction with HA, TES, and PTB were 1.7, 2.6, and 8 nm, respectively. The reduction of Au(III) was rapid with HA and PTB. TES proved to be a mild reducing agent for the synthesis of Au NPs. DLS measurements demonstrated swelling of the PS-b-P2VP micelles due to the incorporation of HAuCl₄ and the reducing agents. The original micellar structure rearranged during the reduction with PTB. ITC measurements revealed that some chemical reactions besides Au NPs formation also occurred in the course of the reduction process. The enthalpy of formation of Au NPs in PS-b-P2VP micelles reduced by HA was determined.     

Conductive,Monodisperse Polyaniline Nanofibers of Controlled Length Using Well‐Defined Cylindrical Block Copolymer Micelles as Templates

Stable colloidal dispersions of polyaniline (PAni) nanofibers with controlled lengths from about 200 nm–1.1 μm and narrow length distributions (L_w/L_n<1.04; L_w=weight average micelle length, L_n=number average micelle length) were prepared through the template‐directed synthesis of PAni using monodisperse, solution‐self‐assembled, cylindrical, block copolymer micelles as nanoscale templates. These micelles were prepared through a crystallization‐driven living self‐assembly method from a poly(ferrocenyldimethylsilane)‐b‐poly(2‐vinylpyridine) block copolymer (PFS₂₅‐b‐P2VP₄₂₅). This material was initially self‐assembled in iPrOH to form cylindrical micelles with a crystalline PFS core and a P2VP corona and lengths of up to several micrometers. Sonication of this sample then yielded short cylinders with average lengths of 90 nm and a broad length distribution (L_w/L_n=1.32). Cylindrical micelles of PFS₂₅‐b‐P2VP₄₂₅ with controlled lengths and narrow length distributions (L_w/L_n<1.04) were subsequently prepared using thermal treatment at specific temperatures between 83.5 and 92.0 °C using a 1D self‐seeding process. These samples were then employed in the template‐directed synthesis of PAni nanofibers through a two‐step procedure, where the micellar template was initially stabilised by deposition of an oligoaniline coating followed by addition of a polymeric acid dopant, resulting in PAni nanofibers in the emeraldine salt (ES) state. The ES–PAni nanofibers were shown to be conductive by scanning conductance microscopy, whereas the precursor PFS₂₅‐b‐P2VP₄₂₅ micelle templates were found to be dielectric in character.     

Highly Ordered Structure Formation in RAFT‐Synthesized PtBOS‐b‐P4VP Diblock Copolymers

Linear poly(4‐tert‐butoxystyrene)‐b‐poly(4‐vinylpyridine) (PtBOS‐b‐P4VP) diblock copolymers are synthesized using reversible addition–fragmentation chain transfer polymerization. The self‐assembly of four different PtBOS‐b‐P4VP diblock copolymers is studied using small‐angle X‐ray scattering and transmission electron microscopy and a number of interesting observations are made. A tBOS₆₂‐b‐4VP₂₈ diblock copolymer with a weight fraction P4VP of 0.21 shows a disordered morphology of P4VP spheres with liquid‐like short‐range order despite an estimated value of of the order of 50. Increasing the length of the 4VP block to tBOS₆₂‐b‐4VP₁₉₉ results in a diblock copolymer with a weight fraction P4VP of 0.66. It forms a remarkably well‐ordered lamellar structure. Likewise, a tBOS₁₄₆‐b‐4VP₁₂₀ diblock copolymer with a weight fraction P4VP of 0.33 forms an extremely well‐ordered hexagonal structure of P4VP cylinders. Increasing the P4VP block of this block copolymer to tBOS₁₄₆‐b‐4VP₁₉₀ with a weight fraction P4VP of 0.44 results in a bicontinuous gyroid morphology despite the estimated strong segregation of . These results are discussed in terms of the architectural dissimilarity of the two monomers, characterized by the presence of the large side group of PtBOS, and the previously reported value of the interaction parameter, , for this polymer pair.

     

Surface Phase Separation and Morphology of Stimuli Responsive Complex Micelles

Complex micelles with a P4VP core surrounded by a mixed PNIPAM/PEG shell were prepared by comicellization of PNIPAM₉₃‐b‐P4VP₅₈ and PEG₁₁₄‐b‐P4VP₅₈ in aqueous solutions. Increasing the temperature above the LCST of the PNIPAM induced a phase separation of the mixed shell due to the collapse of the PNIPAM block. The morphology of the collapsed PNIPAM was dependent on the composition of the mixed shell; a lower content of the PNIPAM resulted in separately distributed domains on the surface of the P4VP core, while a higher content of the PNIPAM led to the formation of continuous membrane around the P4VP core. When the continuous membrane was formed, the hydrophilic PEG block could connect the inner P4VP core and the outer milieu to form channels across the PNIPAM membrane for water and other small molecules to pass through.

     

三嵌段共聚物PAN-b-PEG-b-PAN的合成及其自组装行为的研究

利用原子转移自由基聚合(ATRP)制得了分子量可控、分子量分布窄的聚丙烯腈-b-聚乙二醇-b-聚丙烯腈P(AN-b-PEG-b-PAN)嵌段共聚物. 通过¹H NMR, FTIR, 凝胶渗透色谱(GPC)对所得产物的结构和分子量进行了表征并通过TG和DTA考察了该嵌段共聚物的热稳定性; 运用透射电子显微镜(TEM)、荧光探针技术和动态光散射(DLS)研究了P(AN)₂₇-b-P(EG)₄₅-b-P(AN)₂₇在溶剂水中胶束的形成、结构、形貌和胶束粒径. 结果表明, 三嵌段共聚物P(AN)₂₇-b-P(EG)₄₅-b-P(AN)₂₇的热稳定性较纯聚乙二醇P(EG)好, 且柔性链PEG的引入对嵌段共聚物的放热峰位置没有显著的影响. 当改变此嵌段共聚物溶液浓度时, 该嵌段共聚物会自组装成不同形状的胶束, DLS测量的胶束粒径大于TEM观察的结果, 其临界胶束浓度(cmc)约为4.46×10^－4 g•L^－1.     

Preparation of polymeric vesicles through ultrasonic treatment of poly(styrene‐block‐2‐vinylpyridine) micelles under alkaline conditions

An approach for the preparation of block copolymer vesicles through ultrasonic treatment of polystyrene‐block‐poly(2‐vinyl pyridine) (PS‐b‐P2VP) micelles under alkaline conditions is reported. PS‐b‐P2VP block copolymers in toluene, a selective solvent for PS, form spherical micelles. If a small amount of NaOH solution is added to the micelles solution during ultrasonic treatment, organic‐inorganic Janus‐like particles composed of the PS‐b‐P2VP block copolymers and NaOH are generated. After removal of NaOH, block copolymer vesicles are obtained. A possible mechanism for the morphological transition from spherical micelles to vesicles or Janus‐like particles is discussed. If the block copolymer micelles contain inorganic precursors, such as FeCl₃, hybrid vesicles are formed, which may be useful as biological and chemical sensors or nanostructured templates. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 953–959     

Enhanced stability of ZnTPPS by polymeric gold nanoparticles in acidic aqueous solutions

Novel kind of core-shell corona complex micelles were prepared, which enhanced both the hydrolytic stability and the photostability of water-soluble zinc tetrakis(4-sulfonatophenyl) porphyrin (ZnTPPS) in acidic aqueous solutions. The core-shell gold nanoparticles (AuNPS) were synthesized by reducing HAuCl₄ and di-thioester terminated block copolymer, poly(Nisopropylacrylamide)-block-poly(4-vinylpyridine) (PNIPAM-b-P4VP). The complex micelles with gold core, P4VP/ZnTPPS shell and PNIPAM corona were formed by simple mixing of gold nanoparticles and ZnTPPS. The photochemical properties of the complex micelles were studied by UV–Visiblespectroscopy and fluorescence spectroscopy. The results showed trapping of ZnTPPS in the positively charged micellar shell that effectively prevented demetallation of the ZnTPPS that would occur in acidic aqueous solutions. Furthermore, with appropriate concentration of gold nanoparticles, ZnTPPS in the complex micelle had excellent photostability by suppression of generation of reactive oxygen species (ROS). The enhanced stability of ZnTPPS in acidic aqueous media could be extensively used for photocatalysis and in solar cells.     

Combination of living anionic polymerization and ATRP via ��click�� chemistry as a versatile route to multiple responsive triblock terpolymers and corresponding hydrogels

A combination of anionic polymerization, atom transfer radical polymerization (ATRP) and ??click?? chemistry was used to construct trishydrophilic ABC triblock terpolymers composed of a pH-sensitive A block, a water-soluble B block and two different thermo-sensitive C blocks without any block sequence limitation problems. First, an azido end-functionalized poly(2-vinylpyridine)-block-poly(ethylene oxide) (P2VP-b-PEO-N₃) diblock copolymer was synthesized by anionic polymerization. In a second step, poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA) and poly(oligo(ethylene glycol) methacrylate) (POEGMA) were synthesized via ATRP using an alkyne functionalized initiator. The resulting polymers were attached to the P2VP-b-PEO-N₃ diblock copolymer using the 1,3-dipolar Huisgen cycloaddition (??click?? chemistry). For the ??click?? step, P2VP-b-PEO-N₃ diblock copolymers with either an azidoacetyl or a 2-azidoisobutyryl group were tested. In the latter case, however, a side reaction involving the cleavage of the formed ??click?? product via nucleophilic substitution occurred, preventing a permanent attachment of PDMAEMA or POEGMA to the P2VP-b-PEO-N₃ diblock copolymer. Finally, P2VP-b-PEO-b-POEGMA (with POEGMA=P(MEO₂MA-co-MEO_8.5MA)) and P2VP-b-PEO-b-PDMAEMA triblock terpolymers were successfully synthesized and used to construct stimuli-responsive hydrogels. A concentrated solution of P2VP₅₆-b-PEO₃₇₀-b-P[(MEO₂MA)₈₉-co-(MEO_8.5MA)₇] showed a gel?Csol?Cgel transition at pH?7 upon temperature increase, whereas in the case of P2VP₅₆-b-PEO₃₇₀-b-PDMAEMA₇₀, a gel?Csol or a weak gel?Cstrong gel transition was observed, depending on the applied pH. Finally, the addition of trivalent hexacyanocobaltate(III) ions to the P2VP₅₆-b-PEO₃₇₀-b-PDMAEMA₇₀ solution induced an upper critical solution temperature for the PDMAEMA block, which led to gel formation. This allows for the construction of light-sensitive hydrogels, utilizing the photo-aquation of hexacyanocobaltate(III) ions.