Film characteristics of anodic oxidized AZ91D magnesium alloy by applied power

This study examined the film characteristics of an anodized AZ91D magnesium alloy by varying the direct current and pulse frequency conditions. In order to evaluate the effect of the pulse frequency on film formation, anodic oxidation was carried out by applying direct current and pulse current at a current density of 300 mA/cm². Compared with the sample groups treated with the direct current, a large number of small arcs were generated continuously on the film treated with the pulse current and the film formation rate was found to increase. Homogeneous and compact pores were formed with increasing frequency, and the rate of formation was increased rapidly to the arrival voltage. The film thickness increased and the surface roughness decreased with increasing anodic oxidation time at a fixed frequency of 125 Hz. However, treatment for more than 3 min led to decomposition of the oxidized film onto the previously formed film, which caused an increase in the number of cracks and pores within the film. The most uniform and smallest pores were acquired when the surface was anodized for 3 min at a current density and frequency of 300 mA/cm² and 125 Hz, respectively. X‐ray diffraction revealed the formation of MgO and Mg₂SiO₄ peaks, with a relative decrease in peak intensity for the MgO and Mg substrate. The Vickers hardness value was higher on the treated groups than on the untreated group, and the potentiodynamic polarization test revealed satisfactory corrosion resistance through a decrease in corrosion density and a large improvement in the corrosion potential. Copyright © 2009 John Wiley & Sons, Ltd.     

Electrochemical Synthesis of Amorphous VO2 Colloids and Their Rapid Thermal Transforming to VO2(M) Nanoparticles with Good Thermochromic Performance

Amorphous VO₂ (a‐VO₂) colloids were synthesized by electrochemical anodic oxidation of metallic vanadium. It was found that the a‐VO₂ colloids have a cotton‐like morphology composed of very small clusters, and that the crystallization temperature of the a‐VO₂ colloids can be adjusted either by the electrolyte of the anodic oxidation or/and the dispersion agent of the colloids. VO₂(M) nanoparticles (NPs) (and a NP film) with an average size of about 50 nm can be obtained by a rapid thermal annealing of the a‐VO₂ colloids at 310 °C under air, which is beneficial for practical applications. The VO₂(M) NP film shows an obvious metal–semiconductor transition with a resistance less than 10 Ω in the metallic state. An integral visible transmittance of 40.7 %, a solar transmittance modulation of 9.4 %, and a resistance modulation in the order of 5×10⁴ were realized in the VO₂(M) NP film.     

Effect of formulation of silica‐based solution on corrosion resistance of silicate coating on hot‐dip galvanized steel

Several silica‐based solutions with 50 g/l of SiO₂ were prepared from sodium silicate solutions and silica sol; the silicate conversion coatings were obtained by immersing hot‐dip galvanized steel sheets in these solutions. These solutions were characterized using high‐resolution transmission electron microscopy and ²⁹Si nuclear magnetic resonance; the morphology of the coatings was observed by SEM and atomic force microscopy while the corrosion resistance was evaluated by electrochemical measurements as well as neutral salt spray tests. The results show that the coatings obtained from the single silica sol solution had poor adhesion and the coating obtained from the sodium silicate solution with low SiO₂/Na₂O molar ratio was uneven. By adding the silica sol to the silicate solution with low molar ratio, uniform coatings with better protection property were obtained. According to the results of ²⁹Si nuclear magnetic resonance spectra, the effects of the distribution of silicate anions with various polymerization degrees in the silica‐based solutions on the microstructure and corrosion resistance of the silicate coatings are discussed. Copyright © 2016 John Wiley & Sons, Ltd.     

集流体对可充镁电池电解液电化学性能的影响

系统研究了铂、镍、不锈钢(SS)、铜、铝五种金属集流体和碳纤维、石墨箔、碳布三种碳纸集流体对“一代” (Mg(AlCl₂BuEt)₂/THF)、“二代” ((PhMgCl)₂-AlCl₃/THF)可充镁电池电解液阳极氧化分解电位和镁沉积-溶出性能的影响。金属镍、不锈钢、铜、铝作为可充镁电池正极的集流体时, 充电至一定电压时自身均会发生腐蚀。其中, 镍和不锈钢可用作充电电压在2.1V(vs Mg/Mg²⁺)以下正极材料的集流体; 铜可用作充电电压在1.8V(vs Mg/Mg²⁺)以下正极材料的集流体。碳集流体比金属集流体具有更高的稳定性, 其中, 碳布作为集流体, 适用于充电电压在2.25V(vs. Mg)(对“一代”电解液)和2.95V(vs Mg/Mg²⁺)(对“二代”电解液)以下的正极材料。     

Effects of anodic oxidation on corrosion properties of Al coating by arc spraying in seawater

A layer of Al coatings was prepared on the S355 steel by arc spraying, which was conducted by anodic oxidation treatment; the morphologies, chemical element compositions and phases of Al coating, and anodic oxide layer were analyzed with field emission scanning electron microscope (FESEM), energy dispersive spectrometer (EDS) and X‐ray diffraction (XRD), respectively. The corrosion protections of Al coating before and after anodic oxidation were discussed with a seawater immersion test; the corrosion resistance mechanisms of Al coating and anodic oxide layer in the seawater were also investigated. The results show that the thickness of Al coating is about 300 µm by arc spraying, the sample surfaces become loose after seawater immersion corrosion and Cl^? and O^2? penetrate into the substrate from the cracks, destroying the binding properties of coating–substrate, and the coating fails. After anodic oxidation, the oxide layer is formed in the surface of Al coating with the thickness of about 30 µm; the corrosion products are mainly composed of Al(OH)₃, which barraged the holes caused by seawater corrosion. The corrosion cracks are formed during the corrosion, while the number and depth of cracks decrease obviously after anodic oxidation treatment. The corrosion of Al coating becomes the local corrosion after anodic oxidation treatment, and the grains are smaller, which are easily nucleated to form a new corrosion resistance layer. Copyright © 2015 John Wiley & Sons, Ltd.     

Poly(2,5-dimethoxyaniline) film coating for corrosion protection of iron

A poly(2,5-dimethoxyaniline) (PDMA) film was coated on the iron surface by the electropolymerization of 2,5-dimethoxyaniline in neutral buffer solution (pH?6.86). The PDMA film strongly adhered to the surface because of the polar methoxy groups of the PDMA molecules. The fact that no electrochemical response of the PDMA film-coated iron electrode to dissolved Fe²⁺ exhibited that the PDMA film was less permeable to dissolved species, acting as a diffusion barrier against agents causing corrosion such as H₂O and O₂. The PDMA film coating greatly lowered the anodic current peak ascribed to the anodic dissolution of iron and the corrosion current in strongly acidic medium, 0.5?M H₂SO₄ aqueous solution (1?M?????mol?dm^??) as well as neutral medium (pH?6.86). The high anti-corrosion ability was due to a hybrid effect of the PDMA film not only as the diffusion barrier, but also as an in situ oxidant in spite of the slight redox activity of PDMA. In addition, the PDMA film is much more durable and adhesive than polyaniline film against over-oxidation.     

Variation of the capacity characteristics of a composite material consisting of acetylene black and polytetrafluoroethylene and of its wettability with an aqueous solution under the action of anodic current

The effect exerted by treatment with cyclic anodic current in 1 M H₂SO₄ in the interval 0.0–2.0 V on electrodes made of a porous (55 vol %) composite material consisting of A-437E acetylene black and polytetrafluoroethylene (60 wt %) was studied. The cyclic volt–ampere curves were recorded in 3 M KOH and 1 M H₂SO₄ to determine the double layer capacity. The anodic treatment leads to an increase in the volume of pores filled with the electrolyte and in the electrical capacity of the electrode due both to an increase in the area of the surface wetted with the electrolyte and to the pseudocapacity caused by oxidation of the carbon black surface.     

Cyclic voltammetry of copper in sodium hydroxide solutions

The cyclic voltammograms of the Cu electrode were, obtained in NaOH solution as a function of the voltage scanning rate, electrolyte concentration and voltage range. A correlation was made between three well-defined anodic peaks and their corresponding cathodic ones. The anodic peaks were found to correspond successively to the formation of a monolayer of Cu₂O, formation of a thick multilayer film of CuO and finally Cu₂O₃ upon which O₂ is evolved. It is suggested that CuO is formed from the oxidation of Cu₂O and/or direct oxidation of metallic copper.Below 0.1 M NaOH the ratio of anodic to cathodic charges was found to be about unity, indicating the quantitative reduction of solid oxidation products, while at higher alkali concentrations higher charge ratios were obtained due to increasing proportions of soluble reaction products.The behaviour of the copper electrode in NaOH was found to be quite complicated. Thus, no simple relations were found between the voltage scanning rate and both the peak current and peak potential or between the peak current and the alkali, concentration. Further work is needed to obtain a definitive explanation of this behaviour.     

Preparation and electrochemical study of a new magnesium intercalation material Mg1.03Mn0.97SiO4

Orthorhombic magnesium manganese silicate (Mg_1.03Mn_0.97SiO₄) was prepared and evaluated as a new cathode material for rechargeable magnesium batteries. Although the electrochemical activity of the Mg_1.03Mn_0.97SiO₄ synthesized by high-temperature solid-state reaction is low, the magnesium storage capacity of nanosized Mg_1.03Mn_0.97SiO₄ prepared by modified sol–gel route and in situ carbon coating reaches 244 mAh g⁻¹. The capacity increase mechanism during charge/discharge cycling was also preliminary studied.     

Voltammetric Determination of Tin(II) and Iron(II) on Mechanically Renewed Graphite Electrode in Tin-Plating Electrolyte

The analytical properties of the cathodic peak of tin(II) reduction and the anodic peak of iron(II) oxidation on a graphite electrode were studied with the electrode surface mechanically renewed directly in a solution before applying a potential in each measurement. The influence of the organic components of the phenolsulfonic tin-plating electrolyte on the cathodic current of tin(II) reduction and anodic current of iron(II) oxidation was studied. A dc voltammetric method was proposed for determining tin(II) directly in the phenolsulfonic tin-plating electrolyte, and iron(II) after the electrolyte is diluted tenfold with a 0.5M H₂SO₄ supporting solution.     

The effects of film thickness and incorporated anions on pitting corrosion of aluminum with barrier-type oxide films formed in neutral borate and phosphate electrolytes

The pitting corrosion behavior of high-purity aluminum covered with barrier-type anodic films, which are formed in neutral borate and phosphate electrolytes, has been examined in 0.5 mol dm^?3 NaCl solution at an applied potential of ?0.6 V versus Ag/AgCl, which is slightly nobler than the pitting potential of ?0.64 V in the same solution. The pitting current density, i _p, increased with time after an incubation time, t _i. The double logarithmic plot of i _p and polarization time, t, reveal two straight lines, which are separated at the time, τ. The slope becomes larger after τ for the specimens anodized in the phosphate electrolyte, while it becomes smaller for those in the borate electrolyte. Both the t _i and τ increase with the thickness of the anodic films, and at the similar film thickness, they are much larger for the anodic films formed in the phosphate electrolyte than for those in the borate electrolyte. The corrosion process can be divided into three stages: the incubation period up to t _i, the pit nucleation period before τ, and the pit growth period after τ. We have discussed the different pitting corrosion behavior of the aluminum specimens covered with the anodic films formed in the borate and phosphate electrolytes in terms of ion selectivity of the anodic films.     

Reduction of Na+ within a {Mg2Na2} Assembly

Ionic compounds containing sodium cations are notable for their stability and resistance to redox reactivity unless highly reducing electrical potentials are applied. Here we report that treatment of a low oxidation state {Mg₂Na₂} species with non-reducible organic bases induces the spontaneous and completely selective extrusion of sodium metal and oxidation of the Mg^I centers to the more conventional Mg^II state. Although these processes are also characterized by a structural reorganisation of the initially chelated diamide spectator ligand, computational quantum chemical studies indicate that intramolecular electron transfer is abetted by the frontier molecular orbitals (HOMO/LUMO) of the {Mg₂Na₂} ensemble, which arise exclusively from the 3s valence atomic orbitals of the constituent sodium and magnesium atoms.     

Anodic stripping voltammetry with mercury electrodes in extracts of cadmium,lead, thallium and indium diethyldithiocarbamate complexes and analysis of mixtures

The selectivity of the determination of traces of cadmium, lead, thallium and indium is improved by direct coupling of liquid/liquid extraction and anodic stripping voltammetry. Metals are extracted from aqueous solution to benzene or chloroform after the addition of sodium or zinc diethyldithiocarbamate. Stripping voltammetry of Cd, Tl and Pb at a hanging mercury drop electrode or mercury film electrode is done in benzene/methanol medium (1:1) with 0.1 M NaClO₄ as supporting electrolyte. For indium, the medium is chloroform/ethanol/water (1:4:1) with 0.005 M sodium acetate/0.06 M KBr/0.06 M HCl as supporting electrolyte. The complexes in acidic solution can be decomposed by mercury (II) ions, which provides useful shifts of deposition potentials. Calibration graphs are linear at concentrations of about 10^?7 M with a detection limit of 1×10^?8 M. The method is applied to determine a single metal in the presence of a large amount (1000-fold) of interfering metal.     

Bioactivity Performance of Pure Mg after Plasma Electrolytic Oxidation in Silicate-Based Solutions

The biodegradable metals, including magnesium (Mg), are a convenient alternative to permanent metals but fast uncontrolled corrosion limited wide clinical application. Formation of a barrier coating on Mg alloys could be a successful strategy for the production of a stable external layer that prevents fast corrosion. Our research was aimed to develop an Mg stable oxide coating using plasma electrolytic oxidation (PEO) in silicate-based solutions. 99.9% pure Mg alloy was anodized in electrolytes contained mixtures of sodium silicate and sodium fluoride, calcium hydroxide and sodium hydroxide. Scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), contact angle (CA), Photoluminescence analysis and immersion tests were performed to assess structural and long-term corrosion properties of the new coating. Biocompatibility and antibacterial potential of the new coating were evaluated using U2OS cell culture and the gram-positive Staphylococcus aureus (S. aureus, strain B 918). PEO provided the formation of a porous oxide layer with relatively high roughness. It was shown that Ca(OH)₂ was a crucial compound for oxidation and surface modification of Mg implants, treated with the PEO method. The addition of Ca²⁺ ions resulted in more intense oxidation of the Mg surface and growth of the oxide layer with a higher active surface area. Cell culture experiments demonstrated appropriate cell adhesion to all investigated coatings with a significantly better proliferation rate for the samples treated in Ca(OH)₂-containing electrolyte. In contrast, NaOH-based electrolyte provided more relevant antibacterial effects but did not support cell proliferation. In conclusion, it should be noted that PEO of Mg alloy in silicate baths containing Ca(OH)₂ provided the formation of stable biocompatible oxide coatings that could be used in the development of commercial degradable implants.     

Characterisation of anodic oxide films on zirconium formed in sulphuric acid: XPS and corrosion resistance investigations

Present work describes investigations of a two-step process consisting of galvanostatic anodising in a 1 M H₂SO₄ solution at 100 mA cm⁻² up to the limiting voltages of 20, 60, 80, 100 and 120 V, directly after which potentiostatic regime was employed and the current was allowed to drop. The total treatment time (5 min) was held constant for all samples. The treatment was carried out to improve the corrosion resistance of zirconium in physiological conditions, which was determined by electrochemical evaluation in Ringer’s solution. XPS studies revealed that after anodising sulphur was incorporated into the oxide film in the form of sulphated zirconia. The maximum content of sulphate in the oxide layer was observed after anodising at 80 V. Anodising at higher voltages resulted in formation of coatings with decreasing amount of sulphur. It was found that there is a strong correlation between the sulphur content in the oxide layers and the measured corrosion current density. On the other hand, the pitting corrosion resistance seemed to be unaffected by the presence of S and it was improving with the increasing limiting voltage of the treatment.

     

Kinetics of the transformation process of PbSO4 to PbO2 in a lead anodic film

The kinetics of the nucleation and growth of PbO₂ during the potentiostatic oxidation of PbSO₄ in a lead anodic film was studied using linear sweep voltammetry, potential-step and ac impedance tracing methods. The film investigated is the partially reduced anodic PbO₂ film formed by polarizing a lead electrode in 4.5 M H₂SO₄ solution first at 1.3 V vs. Hg|HgSO₄ for 20 min and then at 0.9 V for 5 min. The nucleation and growth process begins some time after the potential step and is completed within 60 s. The pre- and post-nucleation and growth processes correspond to the growth of the anodic film formed by the oxidation of the lead substrate. The mathematical equations representing the current-time and capacitance-time transients are derived taking the background oxidation current into account. The experimental results are well fitted by these equations. The process obeys the laws of two-dimensional instantaneous nucleation and growth.     

Experimental and theoretical studies of acridine orange as corrosion inhibitor for copper protection in acidic media

The corrosion process commonly limits the use of copper in practical applications. The use of corrosion inhibitors is one of the effective methods to reduce the corrosion rate of copper. In this research, the inhibition effect of acridine orange (3,6-bis(dimethylamine)acridine) (AcO) for the protection of copper in 0.5 ?M ?H₂SO₄ solution was studied. For this aim, the change of open circuit potential with exposure time (E_ocp-t), electrochemical impedance spectroscopy (EIS), linear polarization resistance (LPR), anodic and cathodic potentiodynamic polarization measurements (PP) and chronoamperometry (CA) techniques were used. Some quantum chemical parameters (E_HOMO, E_LUMO and dipole moment) were calculated and discussed. The AcO film formed over the copper surface was examined by SEM, EDX, AFM and contact angle measurements. The electrochemical data showed that AcO is an effective corrosion inhibitor even at low concentrations (ranging between 99.1% and %99.4 ?at concentrations from 0.01 ?mM to 1 ?mM). The corrosion rate of copper decreases in the presence of the inhibitor by reducing both anodic and cathodic rates, which is depended on its concentration. This compound behaves as mixed-type corrosion inhibitors with predominantly cathodic type. Its adsorption on the copper surface obeys Langmuir adsorption isotherm. The value of adsorption equilibrium constant (K_ads) and the standard free energy of adsorption were ΔG_ads 1.298 x 10³ ?M^?1 and -27.71 ?kJ/mol in the case of 0.5 ?M ?H₂SO₄ solution containing 1.0 ?mM AcO, which shows the adsorption is high and spontaneous. The adsorbed inhibitor film over the metal increase contact angle of the surface, which suggests the more hydrophobic properties of the surface are increasing coming from the orientation of hydrophobic sites to the electrolyte. The zero charge potential (E_pzc) studies showed that the surface charge of the metal is positive in the corrosive media containing the inhibitor. Quantum chemical calculations showed that the binding of inhibitor molecules to the metal surface takes place through N atoms of the inhibitor.     

Zum Anionenaufbau von Tetra-n-butylammoniumsilicaten und ihren wäßrigen Lösungen

On the Anion Constitutions of Tetrabutylammonium Silicates and their Aqueous Solutions The anion distribution of tetra-n-butylammonium-(TBA)-silicate solutions with molar TBA/SiO₂ ratios between 0.6 and 4 and silica concentrations between 0.1 M and 2.2 M has been investigated by trimethylsilylation and ²⁹Si NMR techniques. In contrast to concentrated tetramethylammonium- and tetraethylammonium silicate solutions in TBA silicate solutions a preference of double ring silicate anions does not occur. In TBA silicate solutions a broad distribution of silicate anions consisting of monomeric, oligomeric chain and ring, as well as polymeric silicate anions has been observed. Crystalline TBA silicates with TBA/SiO₂ ratios of 0.78 to 1 contain mainly double five-ring silicate anions Si₁₀O₂₅^10? whereas for TBA/SiO₂ ratios higher than 1.4 the double three-ring anion Si₆O₁₅^6? predominates. A recently prepared TBA silicate with low TBA content (TBA/SiO₂ = 0.23) has been found to consist of double four-ring silicate anions with 6 SiOH groups per double four-ring.     

Anodic film formation on osmium electrodes in strong acid solutions: I. Voltammetric studies

Anodic film formation and reduction on electrodeposited Os was studied in strong HCl and HClO₄ solutions. Significant voltammograms were obtained only after long pre-reduction of the electrode and at slow potential sweeps. The potentiodynamic curves reveal strong adsorption of oxygen with formation of OsO₂ and further oxidation to OsO₄ which goes into solution. In strong HCl solutions a corrosion step at high potential with formation of OsO₂Cl₄^2? is detected. The influence of scan rate on peak potential and current and the charge capacity of the electrode surface was investigated. Anion adsorption and increase in acid concentration was found to reduce the extent of the anodic film. The results are discussed in terms of the formation of thick surface oxides and compared with those for Ir and Ru.