质子交换膜燃料电池的水平衡

水平衡是制约质子交换膜燃料电池（PEMFC）性能稳定的关键技术之一。本文针对以H2为燃料的PEMFC的水平衡,首先介绍了电池的工作原理及水迁移;通过实验,证明了电池失水、积水对电池性能及寿命的影响,说明了水平衡的重要性;从电池的组成结构及运行参数详细讨论了影响水平衡的主要因素;并对电池水平衡的管理方法作了讨论。     

改性壳聚糖渗透蒸发膜分离叔丁醇-水

改性壳聚糖渗透蒸发膜分离叔丁醇-水;壳聚糖; 渗透蒸发; 膜分离; 叔丁醇-水     

乙酰丙酮钛螯合物掺杂丙烯酸酯共聚物水溶胶

乙酰丙酮钛螯合物掺杂丙烯酸酯共聚物水溶胶;乙酰丙酮钛螯合物; 丙烯酸酯共聚物水溶胶;掺杂     

以硅胶为载体合成水不溶性季铵盐类杀菌剂

硅胶载体;水不溶性杀菌剂;以硅胶为载体合成水不溶性季铵盐类杀菌剂     

交联结构对水不溶性聚季铵盐类杀菌性能的影响

水不溶杀菌剂;氯球;交联结构对水不溶性聚季铵盐类杀菌性能的影响     

钴铝和锌铝水滑石的合成

采用低过饱和共沉淀法合成了一系列锌铝和钴铝水滑石,其结构经IR和XRD表征。研究结果表明,两类水滑石晶体结构相似;钴铝水滑石的稳定性高于锌铝水滑石。     

从物质本原到干水:水的概念的发展史

在古代哲学中,水被视为一种物质本原。17世纪化学学科形成后,水被定义成一种化学元素。18世纪的化学革命中,水被发现是氢氧化合物。19世纪原子分子论的创立,使水的概念得到微观表征。至20世纪,重水的发现和干水的发明使水的概念有了新的发展。总之,水的概念的发展史,反映了化学思想的发展和科学技术的进步,对化学研究和化学教育均有重要的启示。     

吸收称量法测定天然气中的水含量

一般而言,从气藏产出的天然气会含有一定量的水;另一方面,天然气在输送过程中通过积存有水的管网,也会携带一部分水.水会形成水合物,可能引起管线水堵.     

聚乙二醇对PAMPS/PAM双网络水凝胶性能的影响

采用紫外光引发聚合制备了聚乙二醇(PEG)改性的聚(2-丙烯酰胺-2-甲基丙磺酸)/聚丙烯酰胺(PAMPS/PAM)双网络水凝胶.测定并比较了PEG改性前后双网络水凝胶的溶胀动力学以及单网络水凝胶中丙烯酰胺(AM)的吸收量;用扫描电子显微镜(SEM)观察了单网络水凝胶的结构;测定PEG改性前后双网络水凝胶的压缩及拉伸性能.结果表明,经PEG改性后的双网络水凝胶有较高的溶胀比;改性后单网络水凝胶更易吸收AM;改性后双网络水凝胶压缩形变率达到90%以上、拉伸形变率是未改性双网络水凝胶的2倍.     

乙二胺四乙酸柱撑镁锌铝三元水滑石的制备与表征

采用共沉淀法合成了Mg2ZnAl-CO3水滑石;以其为前驱体,利用离子交换法进行插层组装得到Mg2ZnAl-EDTA三元柱撑水滑石;采用X射线衍射仪和傅立叶变换红外光谱仪对产物进行了表征.结果表明,合成的Mg2ZnAl-CO3水滑石纯度高、晶型良好,其层间CO32-可被乙二胺四乙酸(EDTA)阴离子取代形成Mg2ZnAl-EDTA三元柱撑水滑石;柱撑水滑石的层间距离明显增加,EDTA阴离子在层间倾斜排列.     

Properties of Aqueous Suspensions of Highly Dispersed Silica in the Presence of Polyvinylpyrrolidone

The effect of polyvinylpyrrolidone (PVP) on stability, rheological, electrokinetic and electrophysical properties of aqueous dispersions of A-300 pyrogenic silica was studied. The suspensions were shown to be most stable at PVP concentrations in the range from 0.12 to 0.24 wt % that was provided by structure-related mechanical factors. In the presence of PVP, the value of -potential decreases, the ac conductivity increases, and rheological properties vary similarly to variations of oxide dispersity.     

Stable aqueous film coating dispersion of zein

The effects of plasticizers, pH, and electrolytes on film formation and physical stability of aqueous film coating dispersions (pseudolatexes) of zein were evaluated. The influence of plasticizer on film formation mechanism and minimum film-formation temperature (MFT) were monitored by means of hot stage microscopy (HSM). Furthermore, the effects of pH and electrolytes on the short-term physical stability of pseudolatexes were investigated by measuring relative absorbance, zeta potential, and particle size of the dispersions. With aqueous coating dispersions of zein, stages of film formation were identified. The dispersions plasticized with 20% (w/w) PEG 400 or glycerol formed mechanically strong and flexible films with the lowest glass transition temperature (T(g)). Physical stability of the aqueous zein dispersions was dependent on both pH and electrolyte content. At a pH ranging from 3 to 4, the aqueous dispersions of zein were stable for at least 2 months exhibiting the highest values for zeta potential, the smallest particle size, and a low volume of aggregates. The stable dispersion could be obtained containing a lower concentration of electrolytes (e.g., 10(-5) M). The physical stability of aqueous zein dispersions can be determined by the combined measurements of relative absorbance, zeta potential, and particle size.     

添加剂对TiO2/水分散体流变性的影响

研究了TiO₂生产中有关助剂对其流变性能的影响,得到了TiO₂/水分散体的流变性能与三乙醇胺用量之间的关系,并找到了最佳用量.实验发现,六偏磷酸钠为分散剂时,其使用效果有时间依赖性;碳酸铵作絮凝剂时则对分散体的流变性能和形成的絮凝体有影响.     

Aqueous polyaniline dispersions stabilized by polymeric carboxyl-containing surfactants

Aqueous dispersions of polyaniline were synthesized in the presence of various surfactants. Polyvinyl alcohol and polymeric surfactants with various chain lengths of polyoxyethylene fragments served as stabilizers. It was shown that it is advisable to use polymeric surfactants with side polyoxyethylene fragments to improve the sedimentation stability of aqueous dispersions of polyaniline. It was found that the particle size distribution of aqueous dispersions depends on the composition of the stabilizer used. Raising the pH value of aqueous dispersions to 8 makes it possible to substantially raise the sedimentation stability. The effect of a surfactant used to stabilize the dispersed system on the electrokinetic potential was examined.     

影响高浓度氧化石墨烯分散液流变行为的重要因素及群体平衡动力学分析

氧化石墨烯(GO)片的基面和边缘上存在大量的含氧官能团,能很好地分散在水中,因而具有很好的加工性和广阔的应用前景。在较高浓度范围下,GO水分散液中存在着强烈的竞争性相互作用,从而对流变行为产生较大影响。在本文中,通过稳态、动态等流变实验以及理论分析,研究了pH值、温度和不同的有机溶剂对GO分散液流变行为的影响。结果表明,降低pH值、适当增加温度以及加入吡啶均可促进GO水分散液从粘弹性液体到凝胶态的转变。利用DLVO (Deryagin-Landau-Verwey-Overbeek)理论,探讨了GO片之间的范德华作用力以及双电层排斥作用的相互关系,及其对流变性能的影响。通过群体平衡模型(PBE)分析了GO分散液的屈服应力与体积分数的正相关关系。同时,通过蠕变和松弛实验发现,高浓度的GO分散液中结构变化及流变行为在很多方面与高聚物相似,利用Poyting-Thomson模型能较好地拟合其粘弹性行为。上述研究结果为深入研究复杂的GO分散体系提供理论支撑和实验依据。     

Liquid Crystalline Microdroplets of Graphene Oxide via Microfluidics

Study of stable liquid crystal (LC) microdroplets is of great significance for LC dynamics in confined space or at topological surface.However,the fabrication of LC microdroplets with diverse shape without ionic gelation agents still remains challenging due to the fluid instability.Here,we utilize the microfluidic technology to prepare graphene oxide (GO) LC microdroplets with various morphologies based on the anomalous rheological property of GO aqueous dispersion.Different from LC of one-dimensional polymer,LC containing two-dimensional GO sheets exhibits considerable viscoelasticity and weak extensibility,resulting from the planar molecular conformation and the absence of intermolecular entanglements.The low extensibility ensures that GO aqueous suspension is discretized into monodispersed microdroplets ra-ther than thin thread in the microfluidic channels.The large viscoelasticity and ultra-long relaxation time of GO LC enable the diverse stable morphologies of microdroplets.The droplet morphology is well controlled from sphere to teardrop by modulating the competition between GO viscoelasticity and interfacial tension.The two-dimensional GO LC featuring unique rheological property provides a novel system for the micro-fluidic field,and corresponding topological stability enriches the LC dynamics and opens a new pathway for designing graphene-based materials.     

Reversible Thermal Flocculation of Aqueous α-Fe2O3Dispersions Stabilized with Novel Poly(Vinyl Ether) Block Copolymers

The colloidal stability with respect to temperature of aqueous α-Fe₂O₃dispersions stabilized with novel poly(vinylmethylether)-block-poly(vinyloxy-4-butyric acid) diblock copolymers was studied by rheological and turbidimetric measurements. Adsorption of the block copolymers provides the particles with a steric barrier due to the nonadsorbing poly(vinylmethylether) (PVME) blocks. Rheological measurements on concentrated (15 vol %) dispersions showed that flocculation occurred near the θ temperature of PVME in water. For the turbidimetric analysis, the fraction of small particles was used at a very low concentration. With these dispersions, flocculation was found at higher temperatures, corresponding to the lower critical solution temperature of the block copolymer used. The particles spontaneously redispersed when a heated and flocculated dispersion was cooled to below the flocculation temperature.     

Structure–property study of waterborne,polyurethane acrylate dispersions based on hyperbranched aliphatic polyester for UV-curable coatings

A series of waterborne, hyperbranched polyurethane acrylates for aqueous dispersions (WHPUDs) based on hydroxy-functionalized hyperbranched aliphatic polyester Boltorn H20 were synthesized and characterized by Fourier transform infrared spectroscopy (FTIR). The aqueous dispersions were electrostatically stabilized with carboxyl groups incorporated into their structures, which were neutralized by triethylamine (TEA). The effects of chemical structures of end groups on various properties of WHPUDs, such as particle size, interfacial tension, and rheological behavior were investigated. The average particle sizes of aqueous dispersions, 43–237 nm, were determined by laser light scattering. Owing to the enlargement of the stabilization site, the particle size decreased as the content of carboxyl group, degree of neutralization, and dielectric constant of the dispersion medium increased. Moreover, the surface tension of aqueous dispersions of WHPUDs decreased as the TEA/COOH mole ratio and degree of neutralization increased. The investigations of the rheological behavior of the WHPUDs suggested that all the dispersions belong to pseudoplastic fluids, and each of them has viscosity much lower compared with the commercial water-based resin EB 2002.     

The rheology of aqueous emulsions prepared by direct emulsification and phase inversion from a high viscosity alkyd resin

A comparison of the rheological properties of dispersions of an alkyd resin in water prepared by direct emulsification and phase inversion has been conducted. These dispersions have application as the base dispersion in the manufacture of the new generation of water based gloss paints. An experimental investigation of the effect of dispersed phase fraction, droplet size and dispersion age on the rheological properties of dispersions produced by each emulsification route has been carried out. The droplet size distributions of the dispersions are also characterised. It was found that phase inversion always gave a smaller droplet size distribution than direct emulsification. Surprisingly it was found that for a given dispersed phase fraction, the dispersions with a smaller droplet size, produced by the phase inversion route, have a lower zero shear rate viscosity than those produced by the direct emulsification route. The rheology of the direct emulsification samples was also observed to change with age, whilst with phase inversion samples the rheology was stable. It is proposed that this and other differences observed between the two methods of manufacture can be associated to the presence, or otherwise, of excess surfactant in the aqueous phase.     

Comparison of the stability of multiwalled carbon nanotube dispersions in water

Continuous real-time monitoring of the nanotube concentration in aqueous solution using UV-Vis spectroscopy allows quantitative comparison of the stability of different types of nanotube dispersions. Systematic investigation of the effects of nanotube length and functionalisation for thin multiwalled carbon nanotubes (MWNT) has revealed that shorter MWNT form more stable dispersions than longer nanotubes of the same diameter. MWNT shortened to an average length of approximately 1 microm form stable dispersions in water with concentrations up to 0.013 mg ml(-1) in the absence of surfactants or solubilising functional groups. The introduction of carboxylic or thiol groups on the surface of shortened nanotubes further increases the stability of MWNT dispersions (up to 0.24 mg ml(-1)). The introduction of surfactant or surface charge on MWNT has contrasting effects on functionalised and non-functionalised nanotubes, destabilising and stabilising their dispersions, respectively.