交联木质素负载钯催化剂的制备及对Heck反应的催化性能研究

以天然木质素为原料, 用甲醛对其进行交联得到了交联木质素, 通过简单的方法合成了负载钯催化剂, 用XPS、 TG、 DTA等对其进行了表征. 该催化剂在空气氛围中能很好的催化乙烯基化合物与芳基碘的Heck反应. 如在较低的温度下(40 ℃)催化丙烯酸与碘苯的反应, 产率高达73.7%, 显示了较高的催化活性. 该催化剂重复使用5次, 产率仍高达90%, 显示该催化剂有良好的重复使用性能.     

Structural features and thermal degradation properties of various lignin macromolecules obtained from poplar wood (Populus albaglandulosa)

Four different lignins obtained from poplar wood (milled wood lignin: ML, organosolv lignin: OL, ionic liquid lignin: IL and Klason lignin: KL) were subjected to several types of chemical/thermal analyses to compare their structural features and thermal decomposition properties. The ML, OL, IL and KL yield from poplar wood was 5.5, 3.9, 5.8, 19.5 wt%, respectively. Functional group analysis revealed that during the OL and KL extraction processes, the condensation reaction involved with phenolic hydroxyl groups of lignins significantly prevailed, which led to a highly condensed OL and KL structure. Thermogravimetric analysis (TGA) results showed that OL and KL thermal stability was much higher than that of ML and IL. The derivatization followed by reductive cleavage (DFRC) data showed that the thermal stability was highly associated with the frequency of arylglycerol-β-aryl ether (β-O-4) linkages in the lignin polymers. Pyrolysis-GC/MS (Py-GC/MS) analysis confirmed that acetic acid and several types of phenolic compounds were the main lignin pyrolysis products. The maximum sum of ML (13.8 wt%), OL (9.9 wt%) and IL (11.8 wt%) pyrolysis products was obtained at the pyrolysis temperature of 600 °C, whereas KL (1.6 wt%) was significantly lower due to its high thermal stability and condensation degree. The S- and G-type pyrolysis products (S/G) ratio varied from 1.61 to 1.93 for ML, 2.28 to 5.28 for OL, 2.06 to 2.86 for IL and 1.40 to 2.20 for KL, depending on the pyrolysis temperature, which ranged between 400 °C and 700 °C.     

Presence of 5-hydroxyguaiacyl units as native lignin constituents in plants as seen by Py-GC/MS

The presence of 5-hydroxyguaiacyl moieties in the lignin from several plants has been assessed by Py-GC/MS. Different woody (eucalypt) and nonwoody (flax, hemp, kenaf, jute, sisal and abaca) angiosperms were selected for this study. The pyrolysis of whole fibers released lignin-derived products with p-hydroxyphenyl, guaiacyl and syringyl structures. Indeed, a series of compounds having a 5-hydroxyguaiacyl nuclei, including 3-methoxycatechol, 5-vinyl-3-methoxycatechol and 5-propenyl-3-methoxycatechol, were detected and identified in all samples, although in lower amounts than the normal guaiacyl or syringyl compounds. The analysis of the lignins isolated from the same plants also showed the same 3-methoxycatechol derivatives found after whole fiber pyrolysis. These compounds are supposed to arise from the pyrolysis of 5-hydroxyguaiacyl moieties, which are supposed to be native constituents of lignin in plants forming benzodioxane substructures.     

Degradation of lignin by ozone. I. The kinetics of lignin degradation of ozone

The ozonolysis of spruce periodate and cuoxam lignins and protolignin in spruce wood has been studied in 45% aqueous acetic acid at room temperature. Stirring affected the rate of reaction and a tentative explanation is given. Degradation followed first-order kinetics characterized by a rate constant K with values of 6.96 × 10^?4s^?1 for periodate lignin, 5.10 × 10^?4s^?1 for cuoxam lignin, and 5.09 × 10^?4s^?1 for protolignin in spruce wood. The similarity of the rate constants shows (1) that periodate and cuoxam lignins are good models for wood lignin and (2) that the carbohydrate matrix has an insignificant effect on the rate of delignification of the protolignin by ozone. The average rate of ozone consumption per C₉ unit for periodate lignin was determined as 0.12 mol/min and 0.08 mol/min for cuoxam lignin. The implications of the various results are discussed.     

Oxidation in Acidic Medium of Lignins from Agricultural Residues

Agricultural residues as sugarcane straw and bagasse are burned in boilers for generation of energy in sugar and alcohol industries. However, excess of those by-products could be used to obtain products with higher value. Pulping process generates cellulosic pulps and lignin. The lignin could be oxidized and applied in effluent treatments for heavy metal removal. Oxidized lignin presents very strong chelating properties. Lignins from sugarcane straw and bagasse were obtained by ethanol–water pulping. Oxidation of lignins was carried out using acetic acid and Co/Mn/Br catalytical system at 50, 80, and 115 °C for 5 h. Kinetics of the reaction was accomplished by measuring the UV-visible region. Activation energy was calculated for lignins from sugarcane straw and bagasse (34.2 and 23.4 kJ mol⁻¹, respectively). The first value indicates higher cross-linked formation. Fourier-transformed infrared spectroscopy data of samples collected during oxidation are very similar. Principal component analysis applied to spectra shows only slight structure modifications in lignins after oxidation reaction.     

Oxidation of organosolv lignins in acetic acid

The oxidation of four lignins obtained by organosolv pulping of eucalyptus wood (Acetosolv-eucalyptus Acetosolv lignin [EAL]), sugarcanebagasse (Acetosolv-bagasse Acetosolv lignin [BAL] and in acetone/water/FeCl₃-bagasse acetone/water lignin [BAWL]), and a softwood mixture (Organocell, Munich, Germany) was performed to obtain vanillin, vanillic acid, and oxidized lignin. Experiments were carried out in a cetic acid under oxygen flow using HBr, cobalt(II), and manganese(II) acetates as catalysts. After 10 h the total vanillin and vanillic acid yields were BAL 0.05 mmol, EAL 0.38 mmol, BAWL 0.45 mmol, and Organ ocell 0.84 mmol. Acetosolv lignins are crosslinked, which explains the lower yields in mononuclear products. The reaction volume (Δ V) of this reaction is −817 cm³/mol, obtained in experiments performed under oxygen pressure, showing the high influence of pressure on the oxidation. The major part of the, lignin stays in solution (oxidized lignin), which was analyzed by infrared spectroscopy, showing an increased in carbonyl and hydroxyl groups in comparison with the original lignin. The oxidized lignin can be used as chelating agent in the treatment of effluents containing heavy metals.     

Novel tetrahydrofuran structures derived from beta-beta-coupling reactions involving sinapyl acetate in Kenaf lignins

Free radical coupling of sinapyl gamma-acetate or cross-coupling between sinapyl acetate and sinapyl alcohol yields novel tetrahydrofuran beta-beta-(cross-)coupled dehydrodimers. Such substructures are therefore anticipated in naturally acetylated lignins, e.g. in Kenaf, if sinapyl acetate is a component of the lignin monomer pool. The DFRC (derivatization followed by reductive cleavage) method, modified by replacing all acetyl reagents and solvents with their propionyl analogs (DFRC'), allows the analysis of naturally acetylated lignins. DFRC' treatment of the sinapyl acetate-derived dimers or crossed dimers gave diagnostic products that retain at least one acetate group on a sidechain gamma-position; the products have been authenticated by comparison of their mass spectra and GC retention times with those of synthesized compounds. DFRC' of Kenaf lignins produces the same diagnostic products as from the dimers, implicating the presence of the various tetrahydrofuran units in Kenaf lignins. With data from the model compounds in hand, NMR analysis of Kenaf lignins elegantly confirms the presence of such substructures in the polymer, establishing that acetates on Kenaf lignins arise through incorporation of sinapyl acetate, as a lignin precursor, via enzyme-mediated radical coupling mechanisms.     

Mechanism study of wood lignin pyrolysis by using TG–FTIR analysis

In order to study the pyrolysis mechanism of lignin, Van Soest's method was performed to extract lignin from different species of biomass. Fir and birch lignins were selected as the testing samples and corresponding microstructure was studied by a Fourier transform infrared spectrometry. Several characteristic bands were observed to show the presence and species of lignin. Following experimental research on pyrolysis of lignins from fir and birch were carried out on a thermogravimetric analyzer coupled with a Fourier transform infrared spectrometry. Wood lignin undergoes in three consecutive stages, corresponding to the evaporation of water, the formation of primary volatiles and the subsequent release of small molecular gases. The main pyrolysis sections and the maximum weight loss rates are quite different for different wood species. Phenols are the main volatile products, in addition to alcohols, aldehydes, acids, and so on. As the main gaseous products, CO, CO₂, CH₄ are released out greatly.     

Pyrolysis of lignin extracted from prairie cordgrass,aspen, and Kraft lignin by Py-GC/MS and TGA/FTIR

A study is undertaken to assess the effectiveness of lignin extracted from prairie cordgrass as a pyrolysis feedstock. The effects of variability of lignin source on fast and slow pyrolysis products are also investigated. To accomplish these goals, Py-GC/MS and TGA/FTIR are employed in the pyrolysis of three types of lignin: prairie cordgrass (PCG) lignin extracted from prairie cordgrass, aspen lignin extracted from aspen trees (hardwood), and synthetic Kraft lignin. Fast pyrolysis results from Py-GC/MS show that for PCG lignin, only ten of the detected compounds have relative peak area percentiles that exceed 2% and make up over 52% of the total area. For aspen lignin, excluding butanol that is used in the extraction process, only eight compounds are found to have relative peak areas exceeding 2% that make up over 52% of the total area. For Kraft lignin, only eight compounds exceeding 2% are found to make up more than 45% of the total area. Both techniques, Py-GC/MS and TGA/FTIR, indicate that PCG lignin releases more alkyls than aspen and Kraft lignin. TGA/FTIR results indicate that PCG lignin also releases by far the most light volatile products (<200 °C) while producing the least amount of char among the three types of lignin studied. These characteristics make PCG lignin a good choice in producing good quality bio-oil and thus decreasing upgrade requirements. Py-GC/MS results conclude that aspen lignin produces significantly more pyrolytic products than PCG lignin. This is indicative of the potential of aspen lignin to result in higher conversion rates of bio-oil than the other two lignins.     

Isolation of soil lignins by combination of ball-milling and cellulolysis: Evaluation of purity and isolation efficiency with pyrolysis/GC/MS

CuO oxidation is traditionally used for soil lignin study, although, like other degradation methods it might give access only to a part of the lignin polymers. For structural characterization, lignins are conventionally isolated from plant material by combining ball-milling, cellulolysis and solvent extraction to recover a milled wall enzymatic lignin (MWEL) fraction. This method might isolate condensed lignins, which are not accounted for CuO oxidation. MWELs are still associated with polysaccharides. This study aimed to evaluate if the MWEL method can be used complementary to CuO oxidation for soil lignin studies. We assessed the purity of isolated lignins by pyrolytic characterization of MWEL as well as the efficiency of the isolation method by characterization of the MWEL-free residues. MWELs isolated from maize stems and leaves and soil were primarily composed of lignin units, with few associated polysaccharides. MWELs isolated from soils were more degraded and contained less polysaccharides than MWEL from maize tissues. Fewer lignin-derived pyrolysis products were detected in the soil residue compared to the residues obtained from plant tissues. The MWEL method appeared very efficient in isolating relatively pure lignins from soil, most probably because the lignin–polysaccharide complex is less intact than in plants.     

Synthesis and catalytic application of Pd complex catalysts: Atom‐efficient cross‐coupling of triarylbismuthines with haloarenes and acid chlorides under mild conditions

Palladium‐catalysed cross‐coupling reactions are some of the most frequently used synthetic tools for the construction of new carbon–carbon bonds in organic synthesis. In the work presented, Pd(II) complex catalysts were synthesized from palladium chloride and nitrogen donor ligands as the precursors. Infrared and ¹H NMR spectroscopic analyses showed that the palladium complexes were formed in the bidentate mode to the palladium centre. The resultant Pd(II) complexes were tested as catalysts for the coupling of organobismuth(III) compounds with aryl and acid halides leading to excellent yields with high turnover frequency values. The catalysts were stable under the reaction conditions and no degradation was noticed even at 150°C for one of the catalysts. The reaction proceeds via an aryl palladium complex formed by transmetallation reaction between catalyst and Ar₃Bi. The whole synthetic transformation has high atom economy as all three aryl groups attached to bismuth are efficiently transferred to the electrophilic partner.     

Comparison between the “one-step” and “two-step” catalytic pyrolysis of pine bark

In this study, one-step and two-step pyrolysis systems were compared in the pyrolysis of pine bark. One-step pyrolysis was performed in a fixed bed reactor with and without catalyst. Two-step pyrolysis was carried out in a dual reactor system over catalyst; the first reactor containing no catalyst whereas the second reactor containing catalyst to upgrade the thermally cracked products. The catalysts used in the pyrolysis systems were ReUS-Y, red mud and ZSM-5. In thermal pyrolysis, the pyrolysis system mainly affected the relative amount of bio-oil. The bio-oil yields obtained from two-step thermal pyrolysis were higher than the yields from one-step thermal pyrolysis. In the catalytic runs, ReUS-Y catalyst slightly decreased the char formation with a consequent increase in aqueous phase yield in the case of one-step pyrolysis. However, the catalysts decreased the bio-oil yield with a consequent increase in the gas yield in the case of two-step pyrolysis. The general compositions of bio-oils obtained from both two pyrolysis systems were affected by using catalysts. In the case of one-step pyrolysis, the formation of water and water soluble compounds were reduced by using ReUS-Y catalyst. In the case of two-step pyrolysis, both ZSM-5 and red mud increased the formation of water soluble compounds while they decreased water formation. In contrast, ReUS-Y decreased the formation of water soluble compounds and increased the amount of pyrolytic lignin compounds in bio-oil. Fuel characteristics of pyrolysis products (gas, bio-oil and char) for both two pyrolysis systems were also investigated comparatively.     

Hydrogenolysis of rice husk lignins

The hydrogenolysis of the protolignin, the hydrolysis lignin, and the dioxane lignin of rice husks in the presence of demethylated lignin as catalyst has been studied. The breakdown of the lignins into low-molecular-mass compounds took place with yields comparable with those obtained by hydrogenolysis using other catalysts.Institute of the Chemistry of Plant Substances, Academy of Sciences of the Republic of Uzbekistan, Tashkent, fax (3712) 89 14 75. Translated from Khimiya Prirodnykh Soedinenii, No. 4, pp. 611–613, July–August, 1995. Original article submitted November 21, 1994.     

Organic matter transformation in the environment investigated by quantitative electron paramagnetic resonance (EPR) spectroscopy: studies on lignins

The lignins separated from angiosperm and gymnosperm trees, peat and xylitic brown coal were investigated by quantitative EPR. Observed free radicals in lignins are sensitive to alkaline environment. Gaseous ammonia interacting with solid lignins in resonance cavity shifts quinone-hydroquinone equilibria towards formation of semiquinone anions. Complexation of copper(II) by lignins causes drastic decrease of the semiquinones in the matrices. Formation of lignin-Pb(II) complexes yielded radicals characterised by unusually low g-value (1.9999-2.0003). Monomeric structural units of the investigated lignins were recognised by pyrolysis with in situ methylation by tetramethylammonium hydroxide. Although for the natural lignins the mixture of normal semiquinone signals at g about 2.0034 and signals at g 1.9999 were observed, some monomeric components of lignins (e.g., caffeic acid, pyrogallol) gave pure lines at g = 1.9999. The bacterial oxidative biodegradation of lignin monomeric components and their Pb(II) complexes resulted in increase of the radical signals.     

Thermal Degradation of Hydrolyzed and Oxidized Lignins

The infrared spectra of lignin treated with hydrochloric acid and peroxyacetic acid is investigated. The hydrolysed lignin spectra show a high intensity phenolic OH band at 1375 cm⁻¹ and a decrease in the intensities of CH vibration of methoxyl group at 2920–2810 cm⁻¹ and of the linkage (β–O–4 linkage) at 1120 cm⁻¹. In contrast, the intensity of methoxy group band increases in the case of lignin treated with peroxyacetic acid. This treatment increases also the intensity of the C=O band at 1710 cm⁻¹. The intensity of C=C of aromatic ring band at 1605 and1505 cm⁻¹ is highly affected by the treatment of lignin with peroxyacetic acid, it decreases with large value than in case of lignin treated with HCl. The thermal behavior of these types of lignin has also been studied. The initial and char temperatures of lignin were determined to be 280 and 700°C respectively for unreacted lignin while were 265and 550; 220 and 580°C for lignins treated with hydrochloric and peroxyacetic acid respectively. The rate constants of the mass loss of untreated, hydrolysed and oxidized lignins were found to be 0.05, 0.045 and 0.044 min⁻¹ respectively. This revised version was published online in August 2006 with corrections to the Cover Date.     

Sulfonated palladium(II) N‐heterocyclic carbene complex immobilized on nano–micro size poly(4‐vinylpyridinium chloride) for Suzuki‐Miyaura cross‐coupling reaction

The sulfonated palladium(II) N‐heterocyclic carbene complex Pd^II(NHC)SO₃^?, supported on poly(4‐vinylpyridinium chloride), was used as a heterogeneous, recyclable and active catalyst for the Suzuki–Miyaura reaction. This catalyst was applied for coupling of various aryl halides with phenylboronic acid and the corresponding products were obtained in excellent yields and short reaction times. The catalyst was characterized using Fourier transform infrared and diffuse reflectance UV–visible spectroscopies, scanning electron microscopy and elemental analysis. After each reaction, the catalyst was recovered easily by simple filtration and reused several times without significant loss of its catalytic activity. Copyright © 2015 John Wiley & Sons, Ltd.     

Py–GC–MS examination of intermediates in the vapor from rapid pyrolysis of larch wood and its model components

Py–GC–MS was used to examine the components of vapor from rapid pyrolysis of larch wood and its model components, i.e. example cellulose, xylan, and lignin, and their mixture in accordance with the proportion of the components in larch wood. In this study, a total of 97 compounds in 12 categories were identified in the pyrolysis vapor and were compared. It was found that the most abundant chemical species in these five types of pyrolysis vapor were different. Saccharides and ketones were the major compounds in the pyrolysis vapor from microcrystalline cellulose and xylan, respectively, whereas the most abundant compounds in the pyrolysis vapor from alkaline lignin were sulfur compounds and phenols. Saccharides and ketones were major components of the pyrolysis vapor from MMC, whereas the main compounds in the pyrolysis vapor from larch wood were ketones, phenols, aldehydes, and saccharides. The different composition of the pyrolysis vapor from larch wood and its model mixture was explained on the basis of their different structural frameworks and the non-structural components of larch wood. It was also concluded that the presence of non-structural components, including extractives and ash, affect the pyrolysis reaction of larch wood. Nevertheless, the detailed patterns of this process must be further studied.     

Degradation of Lignin Model Compounds in Organic Solvents. Part 1. Preliminary Studies

Preliminary studies were conducted on the degradation of guaiacylglycerol-β-aryl ether (β-O-4′), phenylcoumaran (β-5′) and biphenyl (5–5′) type lignin model compounds in the organic solvent systems such as ethanol-water (1:1, v/v) and 2-butanone-water (1:1, v/v), in the presence of a di- or trivalent inorganic salt to act as a Lewis acid in the temperature range 140–170°C and with a reaction time up to 60 minutes. The inorganic salts investigated include aluminum chloride, aluminum sulfate, ferric chloride, ferric sulfate, and stannic chloride. The results indicate that lignin model compounds of both phenolic and non-phenolicβ-O-4′ types are susceptible to degradation in organic solvent systems in the presence of one of these salts. Stannic chloride was found to be the most suitable catalyst for the degradation of β-O-4′ type lignin model compounds in the organic solvent systems. In contrast, lignin model compounds of β-5′ and 5–5′ types did not undergo degradation under the same reaction conditions. A possible reaction mechanism for the degradation of β-O-4′ type lignin model compounds in organic solvent system in the presence of stannic chloride is discussed.     

Nitro group reduction and Suzuki reaction catalysed by palladium supported on magnetic nanoparticles modified with carbon quantum dots generated from glycerol and urea

Glycerol and urea were used as green and cheap sources of carbon quantum dots (CQD) for modifying Fe₃O₄ nanoparticles (NPs). The obtained CQD@Fe₃O₄ NPs were used for the stabilization of palladium species and the prepared catalyst, Pd@CQD@Fe₃O₄, was characterized using various techniques. This magnetic supported palladium was applied as an efficient catalyst for the reduction of aromatic nitro compounds to primary amines at room temperature using very low palladium loading (0.008 mol%) and also for the Suzuki–Miyaura cross‐coupling reaction of aryl halides as well as challenging heteroaryl bromides and aryl diazonium salts with arylboronic acids and with potassium phenyltrifluoroborate. This magnetically recyclable catalyst was recovered and reused for seven consecutive runs in the reduction of 4‐nitrotoluene to p‐toluidine and for ten consecutive runs in the reaction of 4‐iodoanisole with phenylboronic acid with small decrease of activity. The catalyst reused in the Suzuki reaction was characterized using transmission electron microscopy, vibrating sample magnetometry and X‐ray photoelectron spectroscopy. Using experiments such as hot filtration and poisoning tests, it has been shown that the true catalyst works under homogeneous conditions according to the release–return pathway of active palladium species.     

One-pot synthesis of α-alkylated nitriles with carbonyl compounds through consecutive aldol reaction/hydrogenation using a hydrotalcite-supported palladium nanoparticle as a multifunctional heterogeneous catalyst

α-Alkylation of various nitriles with carbonyl compounds successfully proceeded using a hydrotalcite-supported palladium nanoparticle as a multifunctional catalyst. The alkylated nitriles were formed through aldol reaction at base sites on the hydrotalcite surface followed by hydrogenation by molecular hydrogen on the palladium nanoparticle.