铋(Ⅲ)-二甲酚橙络合吸附波及其应用

本文报道建立了Bi(Ⅲ)-XO体系在单扫示波极谱仪上测定微量铋的方法。以0.13mol/lHAc-0.13mol/lNaAc为支持电解质,该体系有一灵敏导数极谱波,峰电位为-0.25 V(vs.SCE)。峰电流与铋的浓度在5.0×10~(-8)～1.5×10~(-6)mol/l范围内成正比。确证了该极谱波属于络合吸附波。     

铟(Ⅲ)-向红菲啰啉络合物极谱吸附波的研究

在pH=3.8的磷酸柠檬酸盐缓冲体系中,铟(Ⅲ)-向红菲(口罗)啉络合物在单扫描示波极谱仪上于-0.67 V(vs.SCE)处产生一灵敏的吸附还原波,其二阶导数波灵敏度高,波形好.峰电位Ⅰ~O_P与钢(Ⅲ)浓度在 2.0X10~(-8)~2.0X10~(-6)mol/L范围内呈良好的线性关系,其检测限为8X10~(-9)mol/L铟(Ⅲ).该法用于试剂氧化锌和镀膜玻璃中铟(Ⅲ)的恻定,结果较好.     

铋-N-苯甲酰苯胲络合吸附波的研究

在pH5.6的0.2mol/L NH_4Ac-3×10~(14)mol/L N-苯甲酰苯胲(N-BPHA)底液中,用单扫示波极谱法可得到Bi(Ⅲ)的络合物吸附波,峰电位-0.33V(vs.SCE)左右。导数峰高与铋的浓度在5.0×10~(-8)～4.0×10~(-6)mol/L的范围内呈线性关系,检出限为2.0×10~(-8)mol/L。实验表明,该极谱峰属于络合物吸附波,测定其络合比为Bi(Ⅲ):N-BPHA=1:3。测定了该体系的吸附量;Bi(Ⅲ)-N-BPHA络合物在悬汞电极上的吸附符合Frumkin等温式,测得吸附系数β=2.87×10~5,吸引因子α=0.984。用于矿石中微量铋的测定。     

锑(Ⅲ)-5-Br-PADAP极谱络合吸附波研究

在0.20mol/L甲酸盐缓冲溶液(pH3.8)中,Sb(Ⅲ)-5-Br-PADAP络合物在单扫示波极谱仪上产生一良好的极谱波,峰电位-0.53V(vs.SCE),峰电流与锑浓度在4.1×10~(-8)～8.2×10~(-6)mol/L范围内呈线性关系。实验表明,该波属于络合吸附波。方法已应用于铜合金中锑的测定。     

铟(Ⅲ)-芦丁极谱络合吸附波的研究

在pH6.0的乙酸盐缓冲底液中,用单扫极谱法可获得高灵敏度的铟(Ⅲ)-芦丁的络合吸附波,其检测下限达3.0×10~(-10)mol/L。成功地用于纯金属锌中10~(-5)％铟的测定。测得吸附电活性络合物的组成为:In(Ⅲ):芦丁=1∶2,条件稳定常数为1.8×10~(10)。电极反应是吸附络合物中的In(Ⅲ)还原为In(Hg)。测得电极反应的转移系数α=0.51,表面电化学反应的标准速率常数k_s=0.43/s     

铟—檞皮素极谱络合吸附波测定锌盐中的痕量铟

在pH5的醋酸盐缓冲底液中,可获得灵敏的铟(Ⅲ)—檞皮素的络合吸附波。铟浓度由1.O×10~(-9)—1.0×10~(-6)mol/L与其二阶导数波峰高有正比关系,检出限为5.0×10~(-10)mol/L,用于测定了试剂硫酸锌中的痕量铟,测得电活性络合物的组成为:In(Ⅲ):檞皮素=1:2,还讨论了络合物在汞电极上的吸附行为。     

镉—8—羟基喹啉络合物吸附波的研究

8-羟基喹啉(HOx)是许多金属有效的络合剂,其与金属络合物的极谱行为已有报道.镉的络合物吸附波体系已有不少报道,但镉与8-羟基喹啉络合物的极谱波尚未见报道.我们在试验中发现,镉在5×l0~（-2）mol·L~(-1)HCl-9.4×10~(-2)mol·L~(-1)HOAc-9.0×10~(-2)mol·L~(-1)NaOAc-5.O×10~（-4）mol·L~(-1)HOx溶液中,于-0.69V(vs.SCE)处出现一灵敏的络合物吸附波,峰电流与镉浓度在2.7×10~(-8)～8.9×10~(-6)mol·L~(-1)范围内呈线性关系.检测下限为1.8×1O~(-8)mol·L~(-1).用极谱直线法求得Cd(Ⅱ)与HOx络合物的络合比为1:1.本法用于河水及污水中痕量镉的测定,效果理想,回收率在95%～104%之间.     

铟(Ⅲ)-2-巯基苯骈噻唑-7-碘-8-羟基喹啉-5-磺酸三元络合物吸附波研究

在HCl-NaAc介质(pH 2.5)中,用单扫示波极谱法可获得高灵敏的In(Ⅲ)-2-疏基苯骈噻唑(MBT)-7-碘-8-羟基喹啉-5-磺酸(Ferron)三元络合物吸附波.峰电位在—0.64V(vs.SCE),峰电流与铟浓度在7.0×10~(-10)mol/L～8.8×10~(-7)mol/L之间呈线性关系.检出限可达3.0×10~(-10)mol/L.测得电活性络合物的组成为In(Ⅲ):MBT:Ferron=1:1:1.研究了极谱波的性质和机理.本法选择性较好,用于工业废水和地下水中痕量铟的测定,结果满意.     

铟-8-氨基喹啉络合吸附波的研究

在0.04Mol/L HAc-0.36Mol/L NaAc(pH5.7)和3.5×10~(-4)Mol/L 8-氨基喹啉(8-Aminoquinoline)溶液中,用单扫示波极谱法可得到In(Ⅲ)-8-氨基喹啉络合吸附波,峰电位在-0.78V处。其导数峰高与铟在5.0×10~(-8)-4.0×10~(-6)Mol/L范围内的浓度呈线性关系,最低检出限为2.0×10~(-8)Mol/L。研究确定该波为1∶1铟-8-氨基喹啉络合物的吸附波。测定了几种地球化学标准样品中的锢,结果满意。     

铟—4—（2—噻唑偶氮）—间苯二酚络合物电化学性质研究

在0.06mol·L~(-1)NH_4OAc底液中,铟与4-(2-噻唑偶氮)-间苯二酚(TAR)形成的络合物产生一灵敏还原吸附峰,可用于单扫描示波极谱法测定痕量铟。铟浓度在1×10~(-8)～1×10~(-6)mol·L~(-1)范围内与峰电流呈线性关系。加入少量十二烷基磺酸钠,灵敏度提高,检出下限为5×10~(-9)mol·L~(-1)。该法应用于测定矿石中痕量铟,结果令人满意,用多种电化学手段对络合物的电化学性质进行了研究。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.