Interlaboratory comparison of melt flow rate testing of moisture sensitive plastics

The current standard for melt flow rate testing, ISO 1133, does not adequately cover the measurement of materials that degrade or further polymerise at the melt flow rate test conditions. Materials such as PET, PBT and PA tend to degrade, sometimes rapidly, at melt temperatures if they contain absorbed water. This results in poor repeatability and reproducibility of melt flow rate results. The ISO Plastics Melt Rheology Working Group (TC61/SC5/WG9) is currently developing a modified melt flow rate test method for reliable measurement of moisture sensitive materials, thereby providing an alternative to intrinsic viscosity measurements. The modified method controls more tightly the time–temperature history experienced by the material during testing and, thus, the resultant variability in measured properties due to degradation.The results of an intercomparison of testing of moisture sensitive polymers using the melt volume flow rate (MVR) and melt mass flow rate (MFR) methods are reported. A polypropylene (PP), used as a benchmark material, and five moisture sensitive materials were tested by a number of laboratories measuring either MVR or MFR, or both. For standard testing of the PP material, the repeatability and reproducibility of measurements of MVR were up to 5% and 11%, respectively, and for MFR were 7% and 21%, respectively (95% confidence level, outliers excluded). For the moisture sensitive materials the repeatability and reproducibility of measurements varied significantly, with repeatability values up to 26% and reproducibility values up to 114% being obtained. By imposing moisture and temperature control criteria in accordance with the proposed testing standard, the repeatability and reproducibility limits were significantly reduced to approximately 10% and 60%, respectively. The results suggest that both the moisture and temperature criteria were important for improving the repeatability of MVR measurements. However, the moisture content criterion was more important for improving the reproducibility of MVR measurements.The need to tightly control the sample preparation, in particular the drying and subsequent sample handing procedures, and the time–temperature history of the sample throughout the test is considered critical to further improve the precision of measurements of such materials.     

Coordination chemistry of 5,6,7-trimethyl-[1,2,4]triazolo[1,5-a]pyrimidine with first-row transition-metal salts: Synthesis, spectroscopy and single-crystal structures, with counter-anion dependence of the structures

A variety of new coordination compounds with transition-metal salts and the ligand trimethyl[1,2,4]triazolo[1,5-a]pyrimidine (abbreviated as tmtp) is described, together with several of their 3D crystal structures and spectroscopic and magnetic properties. The compounds were selected based on the coordination ability of the counterion, halide, nitrate, sulfate, thiocyanate and perchlorate. The formed coordination compounds and their coordination numbers were found to be strongly dependent on both the cation and the used counter-anion. The several compounds studied have the following structural formulae: [CuCl₂(tmtp)₂], [CuBr₂(tmtp)₂], [ZnBr₂(tmtp)₂], [Cu(NO₃)₂(tmtp)₂], [CuSO₄(tmtp)₂]₂(H₂O)(MeOH), [Cu(H₂O)(NCS)₂(tmtp)₂], [Zn(NCS)₂(tmtp)₂], [Cd(NCS)₂(tmtp)₂] and [M(H₂O)₂(tmtp)₄](BF₄)₂, in which M = Co, Ni, Zn.The new coordination compounds have been further characterized by NMR, (far-)IR and LF spectra, as well as by C, H, N element analyses, and EPR spectra for the Cu(II) compounds. The coordination around the metal varies from 4 (Zn, Cu), via 5 (Cu) to 6 (for Co, Cu and Cd). The anions usually complete the coordination sphere; only the Co and Zn compounds with the tetrafluoridoborate anions have no coordinated anions, but water ligands complete the octahedral coordination sphere. In the 5-coordinated [Cu(H₂O)(NCS)₂(tmtp)₂] water completes the square pyramid geometry.     

Covariances Simultaneous Component Analysis: a new method within a framework for modeling covariances

In modern omics research, it is more rule than exception that multiple data sets are collected in a study pertaining to the same biological organism. In such cases, it is worthwhile to analyze all data tables simultaneously to arrive at global information of the biological system. This is the area of data fusion or multi‐set analysis, which is a lively research topic in chemometrics, bioinformatics, and biostatistics. Most methods of analyzing such complex data focus on group means, treatment effects, or time courses. There is also information present in the covariances among variables within a group, because this relates directly to individual differences, heterogeneity of responses, and changes of regulation in the biological system. We present a framework for analyzing covariance matrices and a new method that fits nicely in this framework. This new method is based on combining covariance prototypes using simultaneous components and is, therefore, coined Covariances Simultaneous Component Analysis (COVSCA). We present the framework and our new method in mathematical terms, thereby explaining the (dis)similarities of the methods. Systems biology models based on differential equations illustrate the type of variation generated in real‐life biological systems and how this type of variation can be modeled within the framework and with COVSCA. The method is subsequently applied to two real‐life data sets from human and plant metabolomics studies showing biologically meaningful results. Copyright © 2015 John Wiley & Sons, Ltd.     

Thermoresponsive Poly(2‐oxazine)s

The monomers 2‐methyl‐2‐oxazine (MeOZI), 2‐ethyl‐2‐oxazine (EtOZI), and 2‐n‐propyl‐2‐oxazine (nPropOZI) were synthesized and polymerized via the living cationic ring‐opening polymerization (CROP) under microwave‐assisted conditions. pEtOZI and pnPropOZI were found to be thermoresponsive, exhibiting LCST behavior in water and their cloud point temperatures (T_CP) are lower than for poly(2‐oxazoline)s with similar side chains. However, comparison of poly(2‐oxazine) and poly(2‐oxazoline)s isomers reveals that poly(2‐oxazine)s are more water soluble, indicating that the side chain has a stronger impact on polymer solubility than the main chain. In conclusion, variations of both the side chains and the main chains of the poly(cyclic imino ether)s resulted in a series of distinct homopolymers with tunable T_CP.     

Bis­[bis­(pyrimidin‐2‐yl‐κN)­amine](dicyan­amido‐κN1)(tri­fluoro­methanesulfonato‐κO)copper(II) ethanol hemisolvate forms a hydrogen‐bonded chain

In the crystal structure of [Cu(CF₃SO₃)(C₂N₃)(C₈H₇N₅)₂]·0.5C₂H₆O, the Cu^II atom adopts a distorted octahedral geometry, with the basal plane formed by two N atoms of one dipyrimidinyl­amine ligand, one N atom of the second pyrimidine ligand and a nitrile N atom of the dicyan­amide anion [Cu—N = 1.972 (2)–2.021 (2) Å]. The apical positions are occupied by an N atom of the second ligand [Cu—N = 2.208 (2) Å], and an O atom of the tri­fluoro­methane­sulfonate anion [Cu—O = 2.747 (2) Å] at a semi‐coordination distance. Pairs of inversion‐related N—H⋯N hydrogen bonds of the so‐called Watson–Crick type, augmented by two C—H⋯N contacts, link adjacent complexes into an infinite one‐dimensional chain running in the [101] direction.     

(3R,4S)‐3‐Phenyl‐1‐[(R)‐1‐phenyl­ethyl]‐4‐[(R)‐1‐phenylethyliminomethyl]azetidin‐2‐one

The configuration of the chiral ring atoms of the title compound, C₂₆H₂₆N₂O, obtained in an enantioselective synthesis, has been established relative to the known R configuration of the α‐methyl­benzyl moieties. The crystal packing involves a two‐dimensional network of C—H?π interactions between the aromatic rings.     

Strongly isolated ferromagnetic layers in poly-trans-mu-dichloro- and poly-trans-mu-dibromobis(1-(2-chloroethyl)-tetrazole-N4)copper(II) complexes

Two new isostructural compounds, dichlorobis(1-(2-chloroethyl)tetrazole)copper(II) (1) and dibromobis(1-(2-chloroethyl)tetrazole)copper(II) (2), have been prepared. The synthesis, characterization, and spectral and magnetic properties as well as the crystal and molecular structures of 1 and 2 have been studied. Both complexes form two-dimensional, distorted square grid planes of copper and halides, distinctly separated by layers of tetrazole ligands. The differential (ac) magnetic susceptibility, chi = (deltaM/deltaH)(T), and magnetization M(H) of both complexes have been studied as a function of temperature and field. The compounds possess a ferromagnetic interaction within the isolated copper-halide layers (J/k(B) = 8.0 K, J/k(B) = 10.2 K, respectively, for the chloride and the bromide, and T(c) = 4.75 K, T(c) = 8.01 K). The magnetic coupling J'/k(B) between the different layers is found to be very weak (|J'/J| 相似文献   

Conformational control in the cyclization of hydrogen-bonded supramolecular polymers

Bifunctional 2-ureido-4[1H]-pyrimidinone (UPy) derivatives can form small cyclic oligomers as well as long supramolecular polymers in chloroform solutions using the quadruple hydrogen-bonding motif. Ring-chain equilibria of a set of supramolecular monomers containing methyl-substituted alkyl linkers between the hydrogen-bonding UPy moieties were investigated by (1)H NMR spectroscopy and viscometry. The data were characterized in terms of critical concentration (CC, denoting the onset of polymerization) and equilibrium cyclic dimer concentration (EDC, representing preorganization of the monomer toward selective formation of cyclic dimer). Methyl substituents in the monomer were found to promote conformations favorable for cyclic dimerization, leading to an increase in both the EDC and the CC with respect to unsubstituted monomer. Furthermore, we observed an odd-even effect in the CC and EDC with increasing length of the linker between the hydrogen-bonding units. The combined results allow tuning of the critical concentration over a broad range and offer detailed information on the correlation between monomer structure, conformation, and polymerizability which may provide new insights for the study and design of other ring-chain equilibria or helix-random coil transitions.     

Spectroscopy and quantum chemical modeling reveal a predominant contribution of excitonic interactions to the bathochromic shift in alpha-crustacyanin, the blue carotenoprotein in the carapace of the lobster Homarus gammarus

To resolve the molecular basis of the coloration mechanism of alpha-crustacyanin, we used (13)C-labeled astaxanthins as chromophores for solid-state (13)C NMR and resonance Raman spectroscopy of [6,6',7,7']-(13)C(4) alpha-crustacyanin and [8,8',9,9',10,10',11,11',20,20']-(13)C(10) alpha-crustacyanin. We complement the experimental data with time-dependent density functional theory calculations on several models based on the structural information available for beta-crustacyanin. The data rule out major changes and strong polarization effects in the ground-state electron density of astaxanthin upon binding to the protein. Conformational changes in the chromophore and hydrogen-bond interactions between the astaxanthin and the protein can account only for about one-third of the total bathochromic shift in alpha-crustacyanin. The exciton coupling due to the proximity of two astaxanthin chromophores is found to be large, suggesting that aggregation effects in the protein represent the primary source of the color change.