羟基功能化离子液体中Ag纳米材料的制备及结构表征

Ag nanoparticles were prepared using hydroxyl-functionalized ionic liquids as reductant and reaction medium. Nanoparticles with different particle sizes were obtained by using ionic liquids with different structures, while nanorods were harvested when the reaction temperature was increased. The materials obtained were investigated by XRD and TEM. The results indicate that the crystal is in face-centred cubic structure for both of Ag nanoparticles and nanorods, and the diameter of Ag nanoparticles prepared in 1-ethoxyl-3-methyl imidazolium tetrafluoroborate ([C₂OHmim]BF₄), 1-(4′-hydroxyl)butyl-3-methyl imidazolium tetrafluoroborate ([C₄OHmim]BF₄) and 1-(6′-hydroxyl)hexyl-3-methyl imidazolium tetrafluoroborate ([C₆OHmim]BF₄) ionic liquid is about 25, 15 and 10 nm, respectively. And the diameter of Ag nanorods is about 200 nm and 2 μm in length. Finally, the formation mechanism of Ag nanoparticles and nanorods is proposed.     

羟基功能化离子液体中Pd纳米微粒制备与结构表征

1-Ethoxyl-3-methyl imidazolium tetrafluoroborate ([C₂OHmim]BF₄)， 1-(4′-hydroxyl)-butyl-3-methyl imidazolium tetrafluoroborate ([C₄OHmim]BF₄) and 1-(6′-hydroxyl)-hexyl-3-methyl imidazolium tetrafluoroborate([C₆OHmim]BF₄) were synthesized and then Pd nanoparticles were prepareds in these ionic liquids .The structure and shape of Pd nanoparticles were investigated by XRD and TEM. The results indicate that the Pd nanoparticles are fcc structure and there are some differences in the diameter of Pd nanoparticles prepared in different ionic liquids， i.e. 150 nm， 30 nm， 10 nm， respectively. The formation mechanism of nanoparticles is proposed.     

离子液体[Bmim]BF4中单分散Ru纳米粒子的制备及选择加氢性能

采用化学还原法在离子液体1-丁基-3-甲基咪唑四氟硼酸盐([BMim]BF₄)中制备了单分散纳米金属Ru粒子。采用X射线衍射(XRD)、透射电镜(TEM)、傅里叶红外光谱(FTTR)及热重(TG)对所制备样品的形貌和结构进行了表征。XRD表征结果显示：在[BMim]BF₄中制备的Ru具有六方紧密堆积结构,无氧化物峰出现;TEM结果显示：采用正滴法制备的Ru纳米粒子为球形颗粒,呈现良好的单分散状态,粒径分布窄,为2~5 nm,而采用反滴法制备的Ru纳米粒子则发生了严重的团聚,团聚体粒径大于10 nm;FTIR表征表明：Ru纳米粒子表面存在[BMim]BF₄液体层,分析二者之间存在较强的物理吸附作用,[BMim]BF₄在Ru纳米粒子的制备中起到了修饰剂和保护剂的双重作用,这一推论通过TG分析得到了进一步验证。将分散于[BMim]BF₄的Ru纳米粒子作为催化剂应用于苯选择加氢反应,结果分析表明：Ru-离子液体-苯反应体系中,苯转化率仅有0.3%;Ru-离子液体-苯-水反应体系中加氢活性较高,但环己烯选择性较低,在一定条件下,加氢30 min,苯转化率为27.3%,环己烯选择性仅为14.5%。     

烷基咪唑离子液体对脂肪酶催化酯水解反应活性的影响

考察了1-烷基-3-甲基咪唑类离子液体对柱状假丝酵母脂肪酶(CRL)催化橄榄油水解反应活性的影响,利用电导法确定了磷酸盐缓冲液中Br^-,Cl^-,[BF₄]^-系列咪唑离子液体的临界胶束浓度(CMC)和[PF₆]^-系列咪唑离子液体的溶解度.结果显示,离子液体的阴、阳离子对酶活性的影响规律与离子液体的Kosmotropicity性质无明显关联,但与离子液体在体系中的含量密切相关,在最适离子液体含量时,酶活性达到最高;阳离子[C_nMIM]⁺中的n越大,可促进酶活性的离子液体适宜含量越低;Br^-,[BF₄]^-系列离子液体的浓度超过CMC时则抑制酶活;阴离子对酶活性的最大促进作用顺序为Br^->Cl^->[BF₄]^->[PF₆]^-.离子液体对酶活性的影响随体系pH和温度的不同而改变,在最适离子液体浓度时的最适pH均为7.000.在pH 7.000,30 ^oC以及[C₈MIM]Br离子液体浓度为47.6 mmol/L的最佳条件下,最高相对酶活力和比活力分别达到1734%和54.4 U/mg protein.     

离子液体/水混合溶剂促进芳醛与罗丹宁的缩合反应

在室温条件下, 离子液体1-正丁基-3-甲基咪唑四氟硼酸盐([bmim]BF₄)与水组成的混合溶剂能有效催化一系列芳醛与罗丹宁反应, 以80%～93%的产率生成相应的5-芳亚甲基-2,4-噻唑二酮. 离子液体[bmim]BF₄催化活性高, 反应在10～120 min内完成. 实验结果表明该法反应条件温和、产率高、反应时间短、后处理简单、离子液体可重复使用.     

离子液体[bmim][BF4]对联苯甲酰光化学反应影响的瞬态吸收光谱

利用纳秒级激光光解瞬态吸收光谱研究了联苯甲酰(BZ)在离子液体1-丁基-3-甲基咪唑四氟硼酸盐([bmim][BF₄])与乙腈(MeCN)混合体系中的光化学反应行为. 考察了探针分子BZ存在下[bmim][BF₄]/MeCN比例对体系中化学反应动力学的影响. 实验发现: 在N₂饱和条件下, BZ溶液经激光辐照后产生的激发三线态³BZ^*遵循一级反应动力学规律衰减. 离子液体(IL)相对比例增加对³BZ^*瞬态吸收峰的位置和强度没有产生明显影响. 但离子液体体积分数V_IL的变化对[bmim][BF₄]/MeCN混合溶剂中光诱导电子转移的影响却非常显著, 总体上电子转移产生的自由基的表观生成速率常数k_gr随[bmim][BF₄]的V_IL增大而减小. 在[bmim]BF₄]比例足够大的情况下, ³BZ^*与三乙胺或四甲基对苯二胺之间的电子转移被抑制.     

离子液体1-烷基-3-甲基咪唑四氟硼酸盐在水溶液中的聚集行为

采用等温滴定量热法、静态荧光猝灭法和电导法系统研究了典型离子液体1-烷基-3-甲基咪唑四氟硼酸盐([Cnmim][BF₄])在水溶液中的聚集行为, 获得了胶束形成的临界胶束浓度(cmc), 摩尔焓变(ΔH_mic), 摩尔吉布斯自由能变(ΔG_mic), 摩尔熵变(ΔS_mic)以及不同浓度时[Cnmim][BF₄]胶束的平均聚集数等基本参数. 发现这类离子液体的聚集为熵驱动, 阳离子的烷基链越长, ΔG_mic越负, 聚集更容易发生. 此外, 结合[C_nmim]X (X=Cl^-, Br^-)的相关研究发现, 阳离子相同时, 体积越大和疏水性越强的阴离子与头基的结合能力越强, 能有效地降低头基之间的静电排斥, 降低cmc, 利于胶束的形成. 对于[C₁₂mim][BF₄], 添加剂β-环糊精(β-CD)的加入可使cmc增大, ΔH_mic和ΔS_mic减小, 而KBF₄则可使cmc和ΔH_mic减小, ΔS_mic增大.     

在ITO导电衬底上室温电沉积高取向的CuBr薄膜

室温下,通过简单的电沉积过程还原CuBr₂水溶液可在ITO导电衬底上生长出高取向的CuBr晶体。用X-射线衍射仪(XRD)、扫描电镜(SEM)对样品进行了表征。结果表明：CuBr晶体生长沿着<111>晶轴方向具有优先取向。通过烷基咪唑四氟硼酸盐[Bmim][BF₄]离子液体来调控电沉积CuBr的晶体形貌,添加[Bmim][BF₄]后,CuBr晶体生长 (111)面优先取向大大削弱。对离子液体调控CuBr晶体形貌的机理进行了初步探讨。     

ZnWO4纳米微粒高效催化合成5-苯基-1H-四氮唑

约10 nm大小的ZnWO₄纳米微粒通过简单的溶剂热方法成功合成出来, 将其应用于催化苯甲腈[3+2]环加成合成5-苯基-1H-四氮唑的反应。结果表明, 0.2 mmol的ZnWO₄纳米微粒110℃催化反应10 h,合成产物的产率达到81%;非晶态、纳米棒ZnWO₄作为催化剂的产率分别为43%和65%.显然, 催化剂用量少, 反应时间短, 反应条件温和, 催化效率高。这或许归因于ZnWO₄纳米微粒的小尺寸和高分散性, 导致其比表面积大, 活性位点多。ZnWO₄纳米微粒表面的不饱和W原子与腈基作用, 活化了腈基从而加速了反应的进行。     

在离子液体中一步法合成吡唑[5,4-b]-γ-吡喃衍生物

芳醛、丙二腈与4,5-二氢-3-甲基-5-氧代-1-苯基吡唑在离子液体[bmim][BF₄]中反应, 合成了2-氨基-4-芳基-3-氰基-5-甲基-7-苯基吡唑[5,4-b]-γ-吡喃衍生物, 该法快速、高效, 是一种洁净的合成方法. 产物的结构通过红外光谱、核磁共振氢谱和元素分析进行表征.     

Structure and morphology controllable synthesis of Ag/carbon hybrid with ionic liquid as soft-template and their catalytic properties

Ag/carbon hybrids were fabricated by the redox of glucose and silver nitrate (AgNO₃) in the presence of imidazolium ionic liquid ([C₁₄mim]BF₄) under hydrothermal condition. Monodisperse carbon hollow sub-microspheres encapsulating Ag nanoparticles and Ag/carbon cables were selectively prepared by varying the concentration of ionic liquid. Other reaction parameters, such as reaction temperature, reaction time and the mole ratio of silver nitrate to glucose, play important roles in controlling the structures of the products. The products were characterized by XRD, TEM (HRTEM), SEM, energy-dispersive X-ray spectroscopy (EDX), FTIR spectroscopy and a Raman spectrometer. The possible formation mechanism was proposed. The catalytic property of the hybrid in the oxidation of 1-butanol by H₂O₂ was also investigated.     

Development of Palladium Surface‐Enriched Heteronuclear Au–Pd Nanoparticle Dehalogenation Catalysts in an Ionic Liquid

Heteronuclear Au–Pd nanoparticles were prepared and immobilized in the functionalized ionic liquid [C₂OHmim][NTf₂]. The structural and electronic properties of the nanoparticles were characterized by a range of techniques and the surface of the nanoparticles was found to be enriched in Pd. Moreover, the extent of Pd enrichment is easily controlled by varying the ratio of Au and Pd salts used in the synthesis. The heteronuclear nanoparticles were found to be effective catalysts in dehalogenation reactions with no activity observed for the pure Au nanoparticles and only limited activity for the pure Pd nanoparticles. The activity of the heteronuclear nanoparticles may be attributed to charge transfer from Pd to Au and consequently to more efficient reductive elimination.     

Nanoscale organization of ionic liquids and their interaction with peptides probed by C NMR spectroscopy

An NMR study of 10 l-alanine- and l-valine-containing peptides was carried out in the native [C₂MIM][Cl], [C₄MIM][Cl], [C₆MIM][Cl], [C₄MIM][BF₄], [C₄MIM][PF₆], and [C₄Py][BF₄] ionic liquid media. A unique high sensitivity of the ionic liquid system to the nature of peptide and ability to tune solvent–solute interactions were observed in contrast to regular organic solvents. The l-valine peptides can be selectively dissolved in [C₄MIM][Cl] and [C₆MIM][Cl], whereas their solubility in [C₂MIM][Cl] and other ionic liquids was dramatically lower. In spite of structural similarity between the amino acids, a distinct behavior was observed for the l-alanine peptides. Solvent–solute interactions with an ionic liquid impose significant changes, and NMR spectroscopy is a useful probe for the molecular-level and nanoscale organization of the studied systems. An even/odd effect of the number of amino acids in the peptide on molecular interactions in ionic liquids was observed. Enhancement of chemical properties of peptides in ionic liquids and application of ionic liquids in the separation of peptides are the areas of practical interest in the studied systems.     

Viscosities for Ionic Liquid Binary Mixtures with a Common Ion

At present, there is a considerable amount of work devoted to the study of the thermophysical properties of pure ionic liquids, which contrasts with the few data available for their mixtures. One of the most appealing characteristics of ionic liquids is the capability of subtly changing the chemical structure of the cation and anion in order to design appropriate solvents for specific applications. Mixtures of ionic liquids increase enormously this specificity, due to the unlimited combinations that arise from mixing two or more ionic liquids. In this context, the study of the thermophysical properties of these mixtures is revealed as a fundamental task. In this work the viscosities of the ionic liquid binary mixtures with a common ion ([C₆mim] + [C₂mim])[BF₄], ([C₆mim] + [C₄mim])[BF₄], [C₄mim]([BF₄] + [MeSO₄]) and [C₄mim]([PF₆] + [BF₄]) were determined within the temperature range (298.15–308.15) K. The temperature dependence of the viscosity for pure liquids is analyzed by means of the Vogel-Tammann-Fulcher equation and several mixing rules are applied for the mixtures.     

Ionic liquid assisted synthesis of flowerlike Cu2O micro-nanocrystals

Novel flowerlike Cu2O micro-nanocrystals were prepared by a greener reductive reaction of cupric acetate monohydrate with ethylene glycol in aqueous solutions of [C8mim]X (X = Cl , Br , BF4 , PF6 ) and [Cnmim][BF4] (n = 4, 6, 8). The obtained microstructures of Cu2O were characterized by Scanning Electron Microscopy (SEM), X-ray diffraction (XRD) and Fourier Transform Infrared (FT-IR). The effects of cations, anions and concentration of the ionic liquids on the morphology of Cu2O were examined in some details. The results suggest that the formation of flowerlike Cu2O was governed by a [C8mim][BF4] controlled reductive reaction mechanism. As one of their applications, the Cu2O nanoparticles were used for the photocatalytic degradation of methylene blue in aqueous solution, and high photocatalytic activity was observed.     

离子液体型表面活性剂研究

以1-甲基咪唑为原料, 制备了6个常规离子液体: 1-正丁基-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[bmim][BF₄]及[bmim][PF₆])、1-正己基-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[hmim][BF₄]及[hmim][PF₆])、1-正十六烷基-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[C₁₆mim][BF₄]及[C₁₆mim][PF₆])和4个功能化离子液体: 1-(2-羟乙基)-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[2-hemim][BF₄]及[2-hemim][PF₆])、1-乙氧羰基甲基-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[eocmmim][BF₄]及[eocmmim][PF₆]). 研究了这两类离子液体的一些物理性能, 旨在挖掘离子液体在香料香精化妆品工业中的应用价值. 分别检测了它们与一般溶剂的互溶性, 并测定了它们的表面张力和发泡性能, 实验结果表明, 仅[C₁₆mim][BF₄]和[C₁₆mim][PF₆]具有发泡性能, 发泡力分别为68和120 mm.     

Reverse ATRP process of acrylonitrile in the presence of ionic liquids

An ionic liquid, 1‐butyl‐3‐methylimidazolium tetrafluoroborate ([C₄mim] [BF₄]), was first used as the solvent in azobisisobutyronitrile (AIBN)‐initiated reverse atom transfer radical polymerization (RATRP) of acrylonitrile with FeCl₃/succinic acid (SA) as the catalyst system. The polymerization in [C₄mim][BF₄] proceeded in a well‐controlled manner as evidenced by kinetic studies. Compared with the polymerization in bulk, the polymerization in [C₄mim][BF₄] not only showed the best control of molecular weight and its distribution but also provided rather rapid reaction rate with the ratio of [C₄mim][BF₄] at 200:1:2:4. The polymerization apparent activation energies in [C₄mim][BF₄] and bulk were calculated to be 48.2 and 55.7 kJ mol^?1, respectively. Polyacrylonitrile obtained was successfully used as a macroinitiator to proceed the chain extension polymerization in [C₄mim][BF₄] via a conventional ATRP process. [C₄mim][BF₄] and the catalyst system could be easily recycled and reused after simple purification and had no effect on the living nature of polymerization. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2701–2707, 2008     

1-烷基-3-甲基咪唑系列室温离子液体表面张力的研究

合成了系列1-烷基-3-甲基咪唑四氟硼酸盐([C_2～7mim]BF₄)及六氟磷酸盐([C_4～7mim]PF₆)室温离子液体, 并通过核磁氢谱、红外光谱、质谱等手段对其进行了结构表征; 采用Wilhelmy白金板法, 在293～338 K范围内测定了离子液体的表面张力, 测试结果显示, 同类离子液体表面张力γ随温度的升高而线性下降, 同种离子液体的表面张力呈现出较宽的变化范围, 如293 K下, 表面张力值从[C₂mim]BF₄的50.4 mJ/m²到[C₇mim]BF₄的36.1 mJ/m². 最后对离子液体的表面性能进行了讨论.     

Synthesis of gold nanoparticles in sol–gel glass porogens containing [bmim][BF4] ionic liquid

The [bmim][BF₄] ionic liquid effect on gold nanoparticles formation in silica sol–gel materials is studied in order to produce gel-derived glasses with optical properties. The characteristic red color from gold nanoparticles is observed for transparent glass monoliths obtained sintering, between 365 and 425 °C, a silica sol–gel precursor containing HAuCl₄·3H₂O and [bmim][BF₄], under normal atmospheric conditions. The effect of sintering the ionogel at different temperatures (T_sint) or times (t_sint) on the optical properties, shape, size, and distribution of gold nanoparticles is discussed. Presence of the gold particles is observed using transmission electron microscopy images followed by energy dispersive X-ray spectroscopy analysis. The thermal decomposition of [bmim][BF₄] in the ionogel is investigate using calorimetric and spectroscopic techniques, and by analysis of volatile compounds released by the sol–gel material during sintering. With these results a mechanism for the formation of the gold nanoparticles is proposed, where a first ionic liquid degradation step provides the reductive environment that enables the gold nanoparticles production at the range of temperatures between 350 and 425 °C. Upon sintering the synthesized materials the ionic liquid acts as a sacrificial additive and the ionic liquid thermal decomposition products enables the formation of gold nanoparticles in the sol–gel matrix.     

Optical and Bioelectrochemical Characterization of Water‐Miscible Ionic Liquids Based Composites of Multiwalled Carbon Nanotubes

Acidic treated multiwalled carbon nanotubes (AMWNTs) were ground with water‐miscible room temperature ionic liquids, 1‐butyl‐3‐methylimidazolium tetrafluoroborate ([bmim]BF₄), and resulted in AMWNTs‐[bmim]BF₄ composite. Its electrical‐ionic conductivity and optical properties were compared with the other two types of carbon materials‐[bmim]BF₄ composites: pyrolytic graphite powder (PGP), pristine multiwalled carbon nanotubes (PMWNTs), through the ac impedance technology and Raman spectroscopy. The impedance data show that AMWNTs‐[bmim]BF₄ composite exhibits the highest conductivity. Raman spectra study exhibits that the [bmim]BF₄ can form gel with PMWNTs and AMWNTs but only form a viscous liquid with PGP. AMWNTs‐[bmim]BF₄ gel modified GC electrode was applied in direct electrochemistry of heme proteins (Hb and HRP) and it catalysis to the reduction of H₂O₂ was investigated.