Studies on the Electrochemical Behavior of Bleomycin at a Co/GC Ion Implantation Modified Electrode and Its Application

In a 0. 10 mol/L HAc-NaAc buffer solution (pH = 4. 59), a sensitive reduction peak of bleomycin was observed by linear sweep voltammetry at a Co/GC ion implantation modified electrode. The peak potential was-0. 73 V(iw. SCE). The peak current was proportional to the concentration of bleomycin over the range of 5.0 × 10-8-1.0× 10-6 and 1.0× 10-6-1. 0 × 10-5 mol/L with a detection limit of 2.0 × 10-8 mol/L. The electrochemical behavior of the reduction peak of bleomycin at the Co/GC modified electrode was studied by linear sweep and cyclic voltammetry and applied to the determination of bleomycin in urine. This method is simple, rapid and reliable. The reduction process is quasi-reversible. The experiments of AES and XPS showed that Co was surely implanted into the surface of GCE and the depth distribution of Co was in good agreement with Gooses normal distribution; the implanted Co at GCE improved the electrocatalytic activity.     

Cholesterol oxidase biosensor based on a glassy carbon electrode modified with Nafion and methyl viologen

Cholesterol oxidase biosensor has been constructed by using bovine serum albumin and glutaraldehyde as cross linker to immobilize cholesterol oxidase and cholesterol esterase on a glassy carbon electrode modified with Nafion and methyl viologen. The biosensor has been used to determine total cholesterol in blood. The linear range of the determination is 2.5×10~7 to 1.0×10-4 mol/L. The detection limit is about 5.0×10~8 mol/L. The response time is 12 s. This biosensor has the advantage of high selectivity, sensitivity and short response time.     

FLUORIMETRIC DETERMINATION OF TETRACYCLINE IN SERUM AND URINE

The Eu-Tetracycline(TC)-TOPO-sodium dodecyl sulfonate(SDS)system wasstudied,Experiments showed that the maximum fluorescence intensity was obtainedin the pH range of 7.5-8.7 and the concentrations of Eu~(a+),TOPO and SDS are1.0×10~(-6)mol/L,1.0×10~(-8)mol/L and 1.0×10~(-8)mol/L,respectively,This fluorescencesystem can be used for the determination of TC in serum and urine,Beer's Law isobeyed in the range of 2.0×10~(-8)mol/L=1.0×10~(-6)mol/L for the concentration of TC.The determination limit is 1.2×10~(-8)mol/L,The composition and the luminescencemechanism were discussed.     

STUDY OF THE FLUORESCENCE ENHANCEMENT IN THE SYSTEM OF EUROPIUM-OR SAMAR-IUM-TERBIUM-DIBENZOYLMETHANE-CETYLTRIMETHYLAMMONIUM BROMIDE-TRITON X-100 AND ITS APPLICATION

A fluorescence enhancement phenomenon on adding terbium to the Eu or Sm-DBM-CTMAB-Triton X-100 fluorescence system was observed. The fluorescence intensity of this system was 50 times greater than that of the system without terbium at pH 9.0. The fluorescence intensity is a linear function of the concentration of europium or samarium in the range of 1.0×10~(-10)-8.0×10~(-6) mol/L and 1.0×10~(-7)-8.0×10~(-6) mol/L, respectively. The deteetion limits for them were 1.0×10~(-12) mol/L and 1.0×10~(-9) mol/L, respectively. This system was used for the determination of europium or samarium in rare earth samples with satisfactory results.     

Determination of Metamizole Sodium by Cyclic Voltammetry Under Microwave Activation

<正>Microwave radiation was applied to the detection of metamizoie sodium by cyclic voltammetry.The electrochemical characteristics of metamizoie sodium were studied by cyclic voltammetry at GC electrode under microwave radiation and a considerable current enhancement was observed for metamizoie sodium in aqueous 0.05 mol/L H_2SO_4.Under the optional conditions,metamizoie sodium was determined in the absence and presence of microwave activation.In the absence of microwave activation cyclic voltammogram of metamizoie sodium shows good linear relationship in a concentration range of 8.0×10~(-5)—1.0×10~(-3) mol/L in aqueous 0.05 mol/L H_2SO_4 with a detection limit of 6.75×10~(-6) mol/L(S/N=3) and the equation of linear regression is I_p=12.973c-0.1905(R~2=0.9996,n=6);in the presence of 80 W microwave activation cyclic voltammogram of metamizoie sodiumin shows good linear relationship in a concentration range of 4.0×10~(-5)—1.0×10~(-3) mol/L in aqueous 0.05 mol/L H_2SO_4 with a detection limit of 4.41×10~(-6)mol/L(S/N=3) and the equation of linear regression is I_p=25.107c-0.1193(R~2=0.9973,n=7).The current in the presence of 80 W microwave activation increases to about 2 orders of magnitude compared with that in the absence of microwave activation.The proposed method in the presence of microwave activation showed high selectivity and sensitivity,and the sampling of the disposal method is simple.The method was verified by the determination of Metamizoie Sodium tablet with satisfactory results.     

Determination of chloride ion by electrochemiluminescence and investigation of the mechanism

The electrochemiluminescence (ECL) of luminol in aqueous alkaline solution was studied.Trace amounts of chloride showed significant effect on the efficiency of light emission of luminol as a posi-tive trigonometrical wave pulse was exerted on the solution. The detection limit for the chloride is5.0 ×10~(-6) mol/L and the linear calibration range extends up to 1.0 ×10~(-2) mol/L; the relative standarddeviation for 1.0 ×10~(-5) mol / L chloride is 5%. The influencing factors for chloride determination arealso discussed. The possible mechanism for the electrochemiluminescence reaction may be due to theoxidation of chloride ion in the solution to ClO~-, and the latter acts on luminol and then gives outluminescence. The method has been applied to determine the total chloride in tap water with satisfactoryresults.     

Determination of levodopa in pharmaceutical preparations by irreversible biamperometry

Based on the electrocatalytic oxidation of levodopa at gold electrode and the reduction of permanganate at platinum electrode, a novel flow injection irreversible biamperometric method is developed for the determination of levodopa under the potential difference of 0 V imposed between two electrodes. In H2SO4 solution, the linear relationships between currents and the concentrations of levodopa are obtained in the range from 0.04 mg/L to 20 mg/L with the detection limit of 0.012 mg/L. The proposed method is applied to the determination of levodopa in pharmaceutical preparations.     

Thiocyanate ion selective electrode based on bis(N-3-methylphenyl salicylidenaminato)copper(Ⅱ) ionophore

In this work a PVC membrane electrode based on bis(N-3-methyl phenyl salicylidenaminato)copper(II)as ionophore was prepared.The electrode was tested by inorganic anions and showed good selectivity for thiocyanate ion.This sensor showed Nerstian behavior with a slope of a-59.3 mV per decade at 25℃.The proposed electrode exhibited a wide linear range from 1.0 × 10~(-6) mol/L to 1.0× 10~(-1) mol/L with a detection limit of 5.0×10~(-7) mol/L.The electrode response was independent of pH in the range of 4.0-10.0.The response time is about 9-21s,and the electrode can be used for over 60 days without considerable deterioration.The prepared sensor was applied as an indicator electrode in potentiometric titration of SCN with Ag~+ ion and to determine the thiocyanate in samples of urine and saliva.     

Monitoring of Methyldopa by Fast Fourier Transform Continuous Cyclic Voltammetry at Gold Microelectrode

A continuous cyclic voltammetric study of methyldopa at gold micro electrode was carried out. The drug in phosphate buffer (pH 2.0) is adsorpted at 400 mV, giving rise to change in the current of well-defined oxidation peak of gold in the flow injection system. The proposed detection method has some of advantages, the greatest one of which are as follows: first, it is no more necessary to remove oxygen from the analyte solution and second, this is a very fast and appropriate technique for determination of the drug compound in a wide variety of chromatographic analysis methods. Signal-to-noise ratio has significantly increased by application of discrete Fast Fourier transform (FFT) method, background subtraction and two-dimensional integration of the electrode response over a selected potential range and time window. Also in this work some parameters such as sweep rate, eluent pH, and accumulation time and potential were optimized. The linear concentration range was of 1.0×10－7—1.0×10－11 mol•L－1 (r＝0.9975) with a limit of detection and quantitation 0.004 nmol•L－1 and 0.03 nmol•L－1, respectively. The method has the requisite accuracy, sensitivity, precision and selectivity to assay methyldopa in tablets. The influences of pH of eluent, accumulation potential, sweep rate, and accumulation time on the determination of the methyldopa were considered.     

Studies on the Interaction of Beryllon Ⅲ with Proteins by Voltammetric Technique and its Application

A new quantitative determination method of proteins using beryllon Ⅲ by voltammetric technique was developed in this paper. In pH 3.5 Britton-Robinson (B-R) buffer solution, beryllon Ⅲ can bind with human serum albumin (HSA) to form an electro-inactive supermolecular complex. Beryllon Ⅲ has a well-defined voltammetric reduction peak at -0.38 V (vs. SCE) and the addition of protein in this solution can cause the decrease of the reductive peak current. Based on the decrease of the reduction peak current, a new electrochemical method for the determination of HSA was established with linear range of 1.0-40.0 mg/L and the detection limit of 1.0 mg/L. This method is further applied to the determination of real sample of healthy human serum.     

A POLAROGRAPHIC CATHODIC WAVE OF VITAMIN C

The cathodic wave of vitamin C has not been reported in the literature so far.Its E_(1/2)wasfound at-1.85 volt vs.Ag/AgCl(25℃)in the base solution of 0.1mol/L Bu_4NI.Variouselectrochemical and spectral techniques were used for studying the electrode reaction.They all showed that the electrode reaction was quasi-reversible while C was more than1.0×10~(-6)mol/L and mainly adsorptive while C was less than 1.0×10~(-6)mol/L at a mercuryelectrode.The electron transfer number was 2 and the electron transfer coefficient 0.57.Using DPP techniques,the linear response range was 5.0×10~(-7)-2.0×10~(-3)mol/L and thedetection limit 1×10~(-7)mol/L.     

A novel method for Co(Ⅱ) and Cu(Ⅱ) analysis by capillary electrophoresis with chemiluminescence detection

Based on the fact that some metal ions can catalyze the chemiluminescence(CL)reaction of luminol with K_3Fe(CN)_6,a novel capillary electrophoresis CL method was developed for the determination of Co(Ⅱ)and Cu(Ⅱ).The separation was carried out with a 10 mmol/L sodium acetate solution containing 0.8 mmol/L luminol and 2.0 mmol/Lα-HIBA(adjusted to pH 4.8 by HAc solution).The post-capillary reagent was 2.0 mmol/L K_3Fe(CN)_6 which was adjusted to pH 13.0 by NaOH solution.Under the optimum conditions,the detection limits(S/N=3)for Co(Ⅱ)and Cu(Ⅱ)were 7.5×10~(-11)mol/L and 7.5×10~(-9)mol/L,with the linear range of 7.5×10~(-9)mol/L to 1.0×10~(-6)mol/L and 7.5×10~(-8)mol/L to 5.0×10~(-5)mol/L, respectively.     

多臂碳纳米管/Nafion复合材料修饰玻碳电极测定痕量的铅离子

A composite material of nitric acid oxidized multiwalled carbon nanotube （MWNT） and Nation was prepared. Such composite was modified on a glassy carbon electrode to determine trace of lead by differential pulsed voltammetry. In pH=6.47 NaNO3 solution, Pb^2＋ ions were accumulated on the modified electrode at -0.4 V. Compared with a bare and a Nation film coated electrode, the composite coated GC electrode can reduce the accumulating potential and eliminate the toxic character of mercury. The calibration plots were linear at low concentration of 5.0× 10^-9-2.0× 10^-8 mol/L and high concentration of 2.5× 10^-8-5.0× 10^-6 mol/L. The performances characteristics indicate that the electrode can be used to determine trace Pb^2＋ ions.     

方波伏安法测定新型修饰多壁碳纳米管糊电极对肼的电催化氧化(英文)

The application of p-aminophenol as a suitable mediator, as a sensitive and selective voltammetric sensor for the determination of hydrazine using square wave voltammetric method were described. The modified multiwall carbon nanotubes paste electrode exhibited a good electrocatalytic activity for the oxidation of hydrazine at pH = 7.0. The catalytic oxidation peak currents showed a linear dependence of the peaks current to the hydrazine concentrations in the range of 0.5–175 μmol/L with a correlation coefficient of 0.9975. The detection limit (S/N = 3) was estimated to be 0.3 μmol/L of hydrazine. The relative standard deviations for 0.7 and 5.0 μmol/L hydrazine were 1.7 and 1.1%, respectively. The modified electrode showed good sensitivity and selectivity. The diffusion coefficient (D = 9.5 × 10–4 cm2/s) and the kinetic parameters such as the electron transfer coefficient (α = 0.7) of hydrazine at the surface of the modified electrode were determined using electrochemical approaches. The electrode was successfully applied for the determination of hydrazine in real samples with satisfactory results.     

STUDY ON THE DETERMINATION OF METRONIDAZOLE IN HUMAN SERUM BY ADSORPTIVE STRIPPING VOLTAMMETRY

In Britton-Robinson buffer,metronidazole is preconcentreted on HHDE at 0.0 V(Vs.Ag-AgCI),An adsorptive stripping peak is observed at-0.62 V.Tho response is linear from 1x10~(-8)to1×10~(-6)mol/L with 1.5 min accumulation.The method has been successfully applied to the deterination of metronidazole in human serum and formulations.     

A bismuth(Ⅲ) PVC membrane ion selective electrode based on5-(3,4,5-trimethoxyphenyl)-4-amino-1,2,4-triazole-3-thiol

The construction,performance characteristics and application of a new bismuth(Ⅲ) PVC membrane electrode based on 5-(3,4,5-trimethoxyphenyl)-4-amino-1,2,4-triazole-3-thiol are reported in this paper.The designed sensor exhibited a Nernstian response for Bi~(3+) ion ranging from 5.0×10~(-7) mol/L to1.0×10~(-2) mol/L with a slope of 19.8 mV/decade.The operational pH range of the sensor is 3.0-6.0.The electrode shows a response time of 6 s and can be used for at least five weeks without any considerable divergence in potentials.It exhibits very good selectivity relative to a wide variety of alkali,alkaline earth,transition and heavy metal ions.The proposed electrode could be used as an indicator electrode in potentiometric titration of Bi~(3+) ions with EDTA and in the determination of Bi~(3+) content in stomach medicine.     

Amperometric Hydrogen Peroxide Biosensor Based on Multiwall Carbon Nanotubes and Cadmium Sulfide Quantum Dots

<正>A novel third-generation hydrogen peroxide(H_2O_2) biosensor(Hb/CdS/MWNTs/GCE) was fabricated through hemoglobin(Hb) adsorbed onto the mercaptoacetic acid modified CdS QDs/carboxyl multiwall carbon nanotubes'(MWNTs) films.Cyclic voltammogram of Hb/CdS/MWNTs/GCE showed a pair of well-defined and quasi-reversible redox peaks with a formal potential(E~0) of-0.230 V(vs.Ag/AgCl) in 0.1 mol/L pH=8.0 phosphate buffer solution(PBS),which was the characteristic of the Hb heme Fe(Ⅲ)/Fe(Ⅱ) redox couple.The biosensor shows an excellent electrocatalytic activity to the reduction of H_2O_2.The response time of the designed biosensor to H_2O_2 at a potential of -0.30 V was less than 2 s and linear relationships were obtained in the concentration ranges of 2.0×10~(-6)—2.7×10~(-3) mol/L and 2.7×10~(-3)—7.7×10~(-3) mol/L with a detection limit of 3.0×10~(-7)mol/L(S/N=3).The apparent Michaelis-Menten constant K_m was estimated to be 1.324 mmol/L that illustrated the excellent biological activity of the fixed Hb.     

Determination of Trace Amounts of Vanadium by Kinetic-Catalytic Spectrophotometric Methods

Kinetic-catalytic spectrophotometric methods were proposed for the determination of trace amounts of vanadium element as vanadium（Ⅳ） and/or V（Ⅴ） ions. The vanadium（Ⅳ） as VO^2＋ ion and/or vanadium（Ⅴ） as VO3^- ion showed a catalytic effect on the kinetic reactions between a color reagent such as methylthymol blue （MTB） or SPADNS and bromate in acidic media. The rate of decrease in the absorbance of the reagent MTB at 440 nm or SPADNS at 510 nm was proportional to concentration of V（Ⅳ） and/or V（Ⅴ） ions in the solution. The linear ranges for determination of vanadium were obtained in the range of 1.0-150 and 5.0-100.0 μg/L by the fixed-time and slope methods, respectively, with using MTB as reagent. In the presence of SPADNS as reagent, the calibration curves were made in the amplitude 1.0-200.0 and 5.0-150 μg/L of vanadium ion by the fixed-time and slope methods, respectively. Using fixed-time method, the limits of detection were obtained to be 0.5 and 0.7 μg/L of vanadium in the presence of MTB and SPADNS as reagents, respectively. Detection limits of vanadium by slope method and reagents of SPADNS and MTB were obtained to be 3.5 and 3.8 μg/L of vanadium, respectively. The proposed methods were applied successfully to determination of vanadium in synthetic and real samples.     

HIGHLY SENSITIVE SPECTROPHOTOMETRY OF NIOBIUM

In pH2.0-3.0,niobium(V)forms molybdonlobic acid with sodiummolybdate.A spectrophotometric method has been developed for the deter-mination of niobium based on the formation of ion-associate compound ofmolybdoniobate with Butyl Rhodamine B in aqueous solution in the presenceof polyvinyl alcohol and 0.4-0.7 mol/L H_2SO_4.The maximum absorption ofion-associate compound exhioits at 85 nm and the molar absorptivity is7.5×1.0~5 L.mol~(-1).cm~(-1)for niobium.The new method has been applied tothe determination of microamounts niobium in silicate rock,when niobiumcontent is at the level of 8×10~(-3)%,with the relative standard deviationof about 3%.     

Glucose Biosensor Based on Carbon/PVC-COOH/Ferrocene Composite with Covalently Immobilized Enzyme

A carbon/PVC-COOH/ferrocene composite electrode used for the determination of glucose has been prepared. The ferrocene acted as mediator was incorporated into the PVC-COOH polymer and the leakage could be prevented. The presence of carboxyl groups on the electrode surface allowed immobilizing enzyme via EDC and NHS. The ratio of PVC-COOH to graphite powder （w/w） has been studied. Amperometric determination of glucose has been performed at potential of 0.30 V vs SCE. The response time was 〈 15 s. The linear response range was of 0.1-20 mmol/L with a detection limit of 48μmol/L.