The improvement in interfacial shear strength of wood fiber/epoxy composite by sizing with epoxy sizing agent containing MWCNTs

This paper discloses a feasible and high efficient strategy for wood fiber treatment to introducing multi‐wall carbon nanotubes (MWCNTs) to the surface of wood fibers for the aim of improving the interfacial shear strength of wood fiber/epoxy composite. Briefly, a layer of MWCNT was deposited on wood fibers through sizing wood fibers with epoxy sizing agent containing amine‐treated MWCNTs (MWCNT‐PEI). The surface functional groups, morphology, wettability, and interphase properties of MWCNTs on the surface of wood fiber were studied. The remarkable enhancements were achieved in interfacial shear strength of reinforced composites by dipping wood fiber in MWCNTCOOH suspension and wood fiber sizing containing MWCNT‐PEI.     

Tribological properties of poly(phthalazione ether sulfone ketone) composites reinforced with glass fabric modified by graphene oxide depositing

In this paper, by electrophoretic deposition of graphene oxide (GO) on the surface of high‐strength glass fabric, a new fabric/poly(phthalazione ether sulfone ketone) (PPESK) composites material was successfully fabricated. The effects of GO on the interfacial adhesion, interlaminar shear strength, and tribological properties of the composites were investigated. Because of the addition of GO, the interlaminar shear strength of the composites was enhanced by 36.04%. Besides, the scanning electron microscope observation revealed that the interfacial adhesion between PPESK matrix and glass fabric was greatly improved. Attributing to the good interfacial adhesion, the wear‐resistance of the fabric/PPESK composite was greatly enhanced. Moreover, it can be found that the failure location transferred from the interface to the matrix after GO deposition.     

Semiconductive bionanocomposites of poly(3‐hydroxybutyrate‐co‐3‐hydroxyhexanoate) and MWCNTs for neural growth applications

Bionanocomposites of poly(3‐hydroxybutyrate‐co‐3‐hydroxyhexanoate) (P3HB3HHx) (13 % by mol of HHx) with multiwalled carbon nanotubes (MWCNTs) were prepared to obtain semiconductive nanocomposites for potential applications as scaffolds for nerve repair. The effect of the polymer/nanotube interface on the composite properties was studied using oxidized (oxi‐MWCNTs) and surface modified MWCNTs with low‐molecular weight P3HB3HHx (pol‐MWCNTs), in a ratio from 0.3 to 1.2 wt % for each type of MWCNTs employed. Morphology and conductive properties of the composites indicated a good interaction between pol‐MWCNTs and the polymer matrix. Composites with improved conductivity were obtained with only 0.3 wt % of pol‐MWCNTs added. However, agglomeration and lower conductivity was observed for samples with oxi‐MWCNTs. Cell viability studies carried out with neurospheres showed that samples with 1.2 wt % of pol‐MWCNTs are not cytotoxic and, in addition favors the neurospheres growth on the composite surface. Considering the electrical properties and biological behavior, nanocomposites of P3HB3HHx and pol‐MWCNTs are promising substrates for the regeneration of nerve tissue. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 349–360     

碳纳米管改性聚苯硫醚熔纺纤维的结构与性能研究

将多壁碳纳米管(MWCNTs)和聚苯硫醚(PPS)经过熔融挤出后制备成复合材料切片,并采用熔融纺丝法制得碳纳米管改性聚苯硫醚复合纤维.采用扫描电镜(SEM)、拉曼光谱、示差扫描量热分析(DSC)、动态机械分析(DMA)以及力学性能测试等表征手段研究了复合纤维中碳管的分散状态,与基体的界面作用,复合纤维的结晶性能以及力学性能,从而探讨了聚苯硫醚/碳纳米管复合纤维体系的微观结构与宏观性能之间的关系.研究表明,聚苯硫醚分子结构与碳纳米管之间具有的π-π共轭作用使碳管较为均匀的分散在基体中,界面结合较为紧密.同时熔融纺丝过程中的拉伸作用使碳管进一步解缠并使碳管沿纤维拉伸方向取向.另一方面,拉曼光谱显示拉伸作用有效地增强了界面作用,有利于外界应力的传递.碳管的良好分散以及强的界面作用使复合纤维力学性能得到大幅度的提高,当碳管含量达到5 wt%时,复合纤维的模量有了明显的提高,拉伸强度较纯PPS纤维提高了近220%.     

The influence of surface treatment on the tensile and tribological properties of wood fiber‐reinforced polyimide composite

In this paper, the effect of coupling agent surface treatment of wood fiber on tensile and tribological property of wood fiber‐reinforced thermoplastic polyimide (PI) composites was experimentally investigated. Experimental results revealed that coupling agent surface treatment could effectively improve the interfacial adhesion between wood fiber and PI matrix. Compared with the untreated wood fiber/PI composite, the coupling agent‐treated composite had better interfacial adhesion. The fracture surfaces and worn surface of samples were investigated by scanning electronic microscopy to analyze the effects of surface treatment methods.     

Surfactant dispersed multi-walled carbon nanotube/polyetherimide nanocomposite membrane

Carbon nanotube based nanocomposite membranes have been fabricated through solution casting by embedding multi-walled carbon nanotubes (MWCNTs) within polyetherimide (PEI) polymer host matrix. In order to achieve fine dispersion of nanotubes and facilitate strong interfacial adhesion with the polymer matrix, the nanotubes were first treated with surfactants of different charges, namely anionic sodium dodecyl chloride, cationic cetyl trimethyl ammonium chloride and non-ionic Triton X100, prior to the dispersion in the PEI dope solution. Dispersion of MWCNTs in N-methyl-2-pyrrolidone solvent showed that the agglomeration and entanglement of the nanotubes were greatly reduced upon the addition of Triton X100. Scanning electron microscopy and atomic force microscopy examination has evidenced the compatibility of Triton X100 dispersed MWCNTs with the polymer matrix in which a promising dispersion and adhesion has been observed at the MWCNT-PEI interface. The increase in both thermal stability and mechanical strength of the resulting Triton X100 dispersed MWCNT/PEI nanocomposite indicated the improved interaction between MWCNTs and PEI. This study demonstrated the role of Triton X100 in facilitating the synergetic effects of MWCNTs and PEI where the resulting composite membrane is anticipated to have potential application in membrane based gas separation.     

Friction and wear properties of combined surface modified carbon fabric reinforced phenolic composites

Carbon fabric (CF) was surface treated with silane-coupling agent modification, HNO₃ oxidation, combined surface treatment, respectively. The friction and wear properties of the carbon fabric reinforced phenolic composites (CFP), sliding against GCr15 steel rings, were investigated on an M-2000 model ring-on-block test rig. Experimental results revealed that combined surface treatment largely reduced the friction and wear of the CFP composites. Scanning electron microscope (SEM) investigation of the worn surfaces of the CFP composites showed that combined surface modified CFP composite had the strongest interfacial adhesion and the smoothest worn surface under given load and sliding rate. SEM and X-ray photoelectron spectroscopy (XPS) study of carbon fiber surface showed that the fiber surface became rougher and the oxygen concentration increased greatly after combined surface treatment, which improved the adhesion between the fiber and the phenolic resin matrix and hence to improve the friction-reduction and anti-wear properties of the CFP composite.     

Tribological properties of epoxy/polyurea composite

The tribological behavior of epoxy/polyurea composite under dry friction was investigated. The worn surface morphologies of epoxy and epoxy/polyurea composite have been analyzed using scanning electron microscopy (SEM), and the functional group of epoxy and epoxy/polyurea composite before and after wear have been analyzed by a Fourier transform infrared spectrometer (FT‐IR). It has been found that epoxy terminal groups, which exist in an epoxy molecule, can react with the end group amine of the polyurea copolymer, generating more H? O bonds, which enhances the deformation capacity. Polyurea particles are dispersed uniformly in epoxy matrix before wear, while plastic deformation and distorted domains occur on the worn surface of epoxy/polyurea composite. This indicates that the wear resistance of epoxy/polyurea composite was greatly improved by the addition of polyurea elastomer, which led to low frictional coefficients and wear mass losses. Copyright © 2008 John Wiley & Sons, Ltd.     

Functionalized carbon nanotube/polyacrylonitrile composite nanofibers: fabrication and properties

The functionalized multi‐walled carbon nanotubes (f‐MWCNTs) were obtained by Friedel–Crafts acylation, which introduced aromatic amine groups onto the sidewall. And the grafted yield was adjusted by controlling the concentration of the catalyst. The composite solutions containing f‐MWCNTs and polyacrylonitrile (PAN) were then prepared by in‐situ or ex‐situ solution polymerization. The resulting solutions were electrospun into composite nanofibers. In the in‐situ polymerization, morphological observation revealed that f‐MWCNTs was uniformly dispersed along the axes of the nanofibers and increased interfacial adhesion between f‐MWCNTs and PAN. Furthermore, two kinds of f‐MWCNTs/PAN composite nanofibers had a higher degree of crystallization and a larger crystal size than PAN nanofibers had, so the specific tensile strengths and modulus of the composite nanofibers were enhanced. And the thermal stability of f‐MWCNTs/PAN from in‐situ method was higher than that of ex‐situ system. When the f‐MWCNTs content was less than 1 wt%, the specific tensile strengths and modulus of nanofibers were enhanced with increase in the amounts of f‐MWCNTs, and f‐MWCNTs/PAN of in‐situ system provided better mechanical properties than that of ex‐situ system. Copyright © 2010 John Wiley & Sons, Ltd.     

稀土对玻璃纤维填充金属-塑料多层复合材料抗冲击磨损性能的影响

研究了稀土元素处理玻璃纤维填充金属－塑料多层复合材料在冲击载荷、干摩擦条件下的摩擦和磨损性能，并利用扫描电子显微镜（SEM）对磨损表面进行了观察和分析，结果表明，用稀土表面改性剂处理玻璃纤维表面，可以提高玻璃纤维与聚四氟乙烯之间的界面结合力，改善复合材料的界面性能，并有利于在偶件表面形成分布均匀、结合强度高的转移膜，使复合材料与偶件表面之间的对摩减轻，大幅度地降低了复合材料的磨损，从而使复合材料具有优良的摩擦性能和抗冲击磨损性能。     

Strength and toughness of carbon fibers reinforced rigid polyurethane composites by adsorbing tannic acid and refining Ni grains on carbon fibers surface

In this article, short carbon fibers (CFs) reinforced rigid polyurethane (RPU) composites were prepared with the aim of improving both strength and toughness. A tannic acid (TA)‐nickel (Ni) composite coating was spontaneously co‐deposited onto CFs surface by a one‐step electrodeposition method to strengthen the interface bonding of the composites. The satisfactory mechanical properties of the composites were mainly attributed to the superior interfacial adhesion. On the one hand, TA could play a role in refining Ni grain during electrodeposition. On the other hand, the hydroxyl groups attached to composite coating, which were introduced by TA, could react with the RPU matrix to form chemical bonds. When the composites were under stress, the chemical bonds could effectively transfer the stress from matrix to the interface, while the refined Ni crystals could greatly increase the stress transfer path, and thus improve the strength and toughness of the material. Compared with pure RPU, the tensile strength, bending strength,interlaminar shear strength, and impact strength of TA‐Ni‐coated CFs/RPU composites were improved by 14.8%, 83.1%, 28.7%, and 121.4%, respectively.     

Improved Catalytic Performance of Pt Supported on Multi‐Wall Carbon Nanotubes as Cathode for Direct Methanol Fuel Cell Applications Prepared by Dual‐Stepped Surface Thiolation Processes

This study develops a simple surface modification process for modifying the MWCNT surface by thiolation reaction after the conventional nitric acid treatment for strong interface attachment of Pt NPs and improved dispersion onto MWCNTs. The thiolated MWCNTs (Pt/MWCNTs) showed significant improvement of methanol electro‐oxidation activity compared with that treated only by nitric acid solution. The prepared electrode with thiolated MWCNTs was used as the cathode for assembling MEA for DMFC single‐cell applications. Testing results indicate that the thiolated MWCNT cathode can improve the power density of MEA by more than 300% (from 4.6 to 20.6 mW cm^?2) compared with that treated only by conventional nitric acid reactions. The dual‐step modification process for MWCNT surface treatment showed significant improvement over the convention nitric acid treatment and can be successfully used in DMFC applications.     

Enhancement on interlaminar shear strength and water‐lubricated tribological performance of high‐strength glass fabric/phenolic laminate by the incorporation of carbon nanotubes

High‐strength glass fabric (HSGF)/phenolic laminates modified with different contents of carbon nanotubes (CNTs) were fabricated by hot‐compression technique. The effects of CNTs on the interface of HSGF/phenolic, interlaminar shear strength (ILSS) and water‐lubricated tribological performance of HSGF/phenolic laminate were investigated. The ILSS of the laminates were tested on a universal testing machine (DY35), and the tribological properties were evaluated by a block‐on‐ring tribo‐tester. The interfaces of HSGF/phenolic and the worn surfaces of the laminates were analyzed by scanning electron microscope. The results showed that the moderate incorporation of CNTs improved the interface of HSGF/phenolic and accordingly enhanced the ILSS of the laminate. Besides, the friction coefficient of HSGF/phenolic laminate sliding against stainless steel in water can be remarkably stabilized and lowered by the incorporation of CNTs due to the better water lubrication induced by added CNTs and the intrinsic self‐lubrication of CNTs which were further graphitized during the friction and wear process. And the wear rate of the laminate can be accordingly reduced by 1 order of magnitude. The results indicate that CNTs have excellent potential in enhancing both ILSS and tribological fabric/polymer laminate composite, which will greatly improve the current situation of deterioration on mechanical properties by adding traditional solid lubricants. Copyright © 2014 John Wiley & Sons, Ltd.     

Plasma treatment of carbon fiber on the tribological property of polyimide composite

The effect of different ratios of carbon fiber (CF) reinforcing polyimide (PI) and surface treatment of CF on the microstructure and wear resistance of surface layers was studied. The increase of CF content led to a gradual increase in the Interlaminar shear strength (ILSS) values, and the maximum ILSS value arises when the CF content is 15 vol%, with an improvement of 13.45% compared to virgin CF composites. The increased interfacial adhesion could be contributed mainly to the presence of branched PI at the interface region. SEM of the worn surface confirms that the plasma treatment efficiently improves the interfacial adhesion of CF/PI composite. Copyright © 2017 John Wiley & Sons, Ltd.     

Design and synthesis of the polyaniline interface for polyamide 66/multi-walled carbon nanotube electrically conductive composites

A polyaniline interface had been designed and built between multi-walled carbon nanotubes (MWCNTs) and polyamide 66 (PA66) in order to help in the dispersion of MWCNTs in PA66 and improve the interfacial combination between them. Transmission electron microscopy characterizations indicated that functionalized MWCNTs (f-MWCNTs) could be well-distributed in PA66 matrix and the interfacial boundary between them was indiscernible. The mixing conditions, such as f-MWCNT content, temperature, and mixing speed, played important roles in determining the formation of the conductive network and the electrical conductivities of PA66/f-MWCNT composites synthesized. A continuous conductive network was formed at 10 wt% f-MWCNT content, and the corresponding PA66/f-MWCNT composite exhibited an electrical conductivity of 8 orders of magnitude higher than pure PA66. The conducting mechanism agreed well with a thermal fluctuation-induced tunneling model.     

Investigation of the dielectric,mechanical, and thermal properties of noncovalent functionalized MWCNTs/polyvinylidene fluoride (PVDF) composites

To improve the dispersion of multi‐walled walled carbon nanotubes (MWCNTs) and investigate the effect of dispersant for MWCNTs functionalization on the dielectric, mechanical, and thermal properties of Polyvinylidene fluoride (PVDF) composites, two different dispersants (Chitosan and TritonX‐100) with different dispersion capability and dielectric properties were used to noncovalently functionalize MWCNTs and prepare PVDF composites via solution blending. Fourier transform infrared, X‐Ray diffraction, and Raman spectroscopy indicated that TritonX‐100 and Chitosan were noncovalent functionalized successfully on the surface of MWCNTs. With the functionalization of Chitosan and TritonX‐100, the dispersion of MWCNTs changed in different extent, which was investigated by dynamic light scattering and confocal laser scan microscopy. The dielectric, mechanical, and thermal properties of PVDF composites were also improved. Meanwhile, it was also found that the dielectric properties of PVDF composites are closely related to the dielectric properties of dispersant. High dielectric constant of dispersant contributes to the grant dielectric constant of PVDF composites. The mechanical and thermal properties of MWCNTs/PVDF composites largely depend on the dispersion of MWCNTs in PVDF, interfacial interactions and the residual solvent. Copyright © 2016 John Wiley & Sons, Ltd.     

The addition of clay on the mechanical properties of surface‐treated CF‐filled PA66 composites

Polyamide 66 (PA66) composites filled with clay and carbon fiber (CF) were prepared by twin‐screw extruder in order to study the influence of nanoparticle reinforcing effect on the mechanical behavior of the PA66 composites (CF/PA66). The mechanical property tests of the composites with and without clay were performed, and the fracture surface morphology was analyzed. The results show that the fracture surface area of the clay‐filled CF/PA66 composite was far smoother than that of the CF/PA66 composite, and there formed a tense interface on the CF surface after the addition of clay. The tensile and flexural strength of CF/PA66 composites with clay was improved. The impact strength decreased because of the high interfacial adhesion. In conclusion, the addition of clay favored the improvement of the higher interface strength and so had good effect on improving the tensile and flexural properties of the composites. Copyright © 2017 John Wiley & Sons, Ltd.     

Efficient Direct‐Methanol Fuel Cell Based on Graphene Quantum Dots/Multi‐walled Carbon Nanotubes Composite

Direct‐methanol fuel cells are proton‐exchange fuel cell in which methanol is used as the fuel. The important advantage of these fuel cells is the simplicity of transport and storage of methanol. In this study, methanol fuel cell electrocatalysts including graphene quantum dots (GQDs), functionalized multi‐walled carbon nanotubes (f‐MWCNTs) and GQDs/f‐MWCNTs composite were synthesized. The structures of synthesized electrocatalysts were highlighted by scanning electron microscope (SEM), raman spectroscopy, UV–vis spectroscopy, fourier transform infrared spectroscopy (FTIR), electrochemical impedance spectroscopy (EIS) and x‐ray diffraction (XRD) method. After that, the effective surface areas (ESA) of GQDs, f‐MWCNTs and GQDs/f‐MWCNTs were calculated. Finally, GQDs/f‐MWCNTs composite modified glassy carbon electrode (GQDs/f‐MWCNTs/GCE) showed highest current signals for methanol oxidation than those of comparable GQDs/GCE and f‐MWCNTs/GCE.     

钛酸钾晶须界面性质研究

通过乳液聚合的方法对钛酸钾晶须进行表面改性,获得了表面包裹聚甲基丙烯酸甲酯的钛酸钾晶须. FT-IR、SEM、EDS的表征表明,钛酸钾晶须的表面包裹了聚甲基丙烯酸甲酯膜,形成了以钛酸钾晶须为核,聚甲基丙烯酸甲酯为壳的复合粒子.研究表明,改性后的晶须表面能降低,在有机溶液中的界面张力大大降低,与聚甲基丙烯酸甲酯的界面性质相似,说明改性后的晶须基本被聚甲基丙烯酸甲酯完全包裹,因此晶须由亲水性变为疏水性,在有机溶液中的分散性显著提高.     

Synthesis of MWCNTs‐core/thiophene polymer‐sheath composite nanocables by a cationic surfactant‐assisted chemical oxidative polymerization and their structural properties

Multi‐walled carbon nanotubes (MWCNTs)‐core/thiophene polymer‐sheath composite nanocables were synthesized by chemical oxidative polymerization of 3,4‐ethylenedioxythiophene (EDOT) with oxidant (FeCl₃) in the presence of cationic surfactant, deceyltrimethyl ammonium bromide (DTAB). In the polymerization process, DTAB surfactant molecules were adsorbed on the surface of MWCNTs and forms MWCNTs‐DTAB soft template. Upon the addition of EDOT and oxidant, the polymerization take place on the surface of MWCNTs and PEDOT is gradually deposited on the surface of MWCNTs. The resulting MWCNTs‐PEDOT nanocomposites have the nanocable structure. Nanocomposites were characterized by HRTEM, FE‐SEM, XRD, XPS, TGA, FTIR and PL, respectively. The π‐π interactions between PEDOT and MWCNTs enhancing the thermal and electrical properties of the nanocomposites with loading of MWCNTs. The temperature dependence conductivity measurements show that the conductivity of the nanocomposite decrease with a decrease of temperature, and conductivity‐temperature relationship is well fit by the quasi‐one dimensional variable range hopping mode. The mechanism for the formation of composite nanocables was explained on the basis of self‐ assembly of micelles. The reported self‐assembly strategy for the synthesis of PEDOT‐coated MWCNTs in micellar medium is a rapid, versatile, potentially scalable, stable, and making it useful for further exploitation in a varies types of applications. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1477–1484, 2010