Study on structure and performance of surface‐metallized carbon fibers reinforced rigid polyurethane composites

The simultaneous promotion in mechanical and electrical properties of rigid polyurethane (RPU) is an important task for expanding potential application. In this work, carbon fibers (CFs) reinforced RPU composites were prepared with the goal of improving mechanical and electrical properties. Metallized CFs meet our performance requirements and can be easily achieved via electrodeposition. However, the weak bonding strength in fiber‐metal‐RPU interface restricts their application. Inspired by the reducibility and wonderful adhesion of dopamine (DA), we proposed a new and efficient electrochemical method to fabricate metallized CFs, where DA polymerization was simultaneously integrated coupled with the reduction of metal ions (Ni²⁺). The characterization results helped us to gain insight about the reaction mechanism, which was never reported as far as we know. Compared with pure RPU, the tensile, interlaminar shear and impact strength of polydopamine (PDA)‐nickel (Ni) modified CFs/RPU composites were improved by 11.2%, 21.0%, and 78.0%, respectively, which attributed to the strong interfacial adhesion, including mechanical interlocking and chemical crosslinking between treated CFs and RPU. In addition, the PDA‐Ni surface treatment method also affected the dispersion of short CFs in the RPU, which increased the possibility of conductor contact and reduced insulator between fibers networks, resulting in higher electrical conductivity.     

The effects of cauliflower-like short carbon fibers on the mechanical properties of rigid polyurethane matrix composites

Stress concentration and weak interfacial strength affect the mechanical properties of short carbon fibers (CFs) reinforced polymer composites. In this work, the cauliflower-like short carbon fibers (CCFs) were prepared and the point was to illuminate the effects of fiber morphology on the mechanical properties of the CCFs/rigid polyurethane (RPU) composites. The results indicated that the surface structure of CCFs could increase the surface roughness of the fibers and the contact area between fibers and matrix, thereby promoting the formation of irregular interface. Compared with pure RPU and initial CFs/RPU composites, the strength and toughness of CCFs/RPU composites were simultaneously improved. The satisfactory performance was attributed to the special fibers structure, which played an anchoring role and consumed more energy during crack propagation.     

Modification effects of short carbon fibers on mechanical properties and fretting wear behavior of UHMWPE composites

The present work comparatively studied the modification effects of short carbon fiber (CF) on the mechanical properties and fretting wear behavior of ultra‐high molecular weight polyethylene (UHMWPE)/CF composites. The interactions between CFs and UHMWPE interface were also investigated in detail. The results showed that, with the increase in fiber content, the compressive modulus and hardness of the composites increased, while its impact strength decreased. It was found that filling of CF can reduce the friction and wear of UHMWPE. In addition, the UHMWPE‐based composites reinforced with nitric acid‐treated CF exhibited better mechanical properties, lower friction coefficient, and higher wear resistance than those of untreated UHMWPE/CF composites. This was attributed to the improvement of interfacial adhesion and compatibility between CF and UHMWPE matrix caused by surface chemical modification of CF. Copyright © 2015 John Wiley & Sons, Ltd.     

碳电极上电沉积的Ni-MgO纳米复合物催化甲醇和乙醇电氧化反应

在细小MgO增强颗粒的存在下,采用电沉积法在碳阳极上经瓦特镍制得Ni–MgO纳米复合物,考察了它在碱性介质中电催化氧化甲醇和乙醇反应性能,并与碳涂覆的纯Ni催化剂(Ni/C)性能进行了比较。运用能量散射谱、X射线衍射和扫描电镜分别表征了沉积的纳米复合物的化学组成、相结构和表面形貌,并采用循环伏安法(CV)、计时电流法和电化学阻抗谱(EIS)等电化学技术考察了所制电催化剂阳极的催化活性。结果表明, Ni/C催化剂在电氧化反应中表现出很低的催化活性和稳定性,而MgO的引入显著增加了Ni催化剂在醇氧化反应中的催化活性和抗中毒性能。 EIS和CV结果证实Ni–MgO/C纳米复合物电极具有比Ni/C更低的电荷转移阻力和更高的抗中毒性能。     

Effect of carbon fiber surface treatments on the flexural strength and tribological properties of short carbon fiber/polyimide composites

Pitch‐based short carbon fibers (CFs) were treated by air oxidation and cryogenic nitrogen, respectively. Thereafter the treated and untreated CFs were incorporated into polyimide (PI) matrix to form composites. The CFs before and after treatment were examined by XPS and SEM.The flexural strength of the specimen was determined in a three‐point test machine and the tribological properties of PI composites sliding against GCr15 steel rings were evaluated on an M‐2000 model ring‐on‐block test rig. The results show that the surface of the treated CFs became rougher. Lots of active groups formed on the CF surface after air oxidation.The treatment can effectively improve the mechanical and tribological properties in their PI composites due to the enhanced fiber‐matrix interfacial bonding. Copyright © 2008 John Wiley & Sons, Ltd.     

Effects of surface synergy for the dispersion of short carbon fibers sized by adipic acid modified epoxy resin potassium

The carbon fiber (CF) surface plays a critical role in the performance of CF composite materials. Adipic acid modified epoxy resin potassium (AAEK) prepared with epoxy resin and adipic acid, and KOH was employed as the CF sizing agent. Then, series of surface properties of AAEK‐treated carbon fiber (CF‐AAEK) including surface charge, morphology, and groups were characterized by using Faraday cup, friction coefficient gauge, atomic force microscopy, X‐ray photoelectron spectroscopy, and thermogravimetry. The results indicated that the dispersion coefficient of CF‐AAEK was increased by 1.72 times and there were synergistic effects for the dispersion of short CFs during the sizing treatment process with AAEK. In addition, the flexural strength of treated short CF composite proved to increase by 168%, which evaluated that the better CF dispersion in the matrix was a critical factor for the mechanical property improvement of short CF‐AAEK/epoxy resin composites.     

Surface modification of carbon fiber for improving the interfacial adhesion between carbon fiber and polymer matrix

In this study, the reinforcing mechanism of amine functionalized on carbon fibers (CFs) has been precisely discussed, and the differences between aliphatic and aromatic compounds have been illustrated. Polyacrylonitrile‐based CFs were functionalized with ethylenediamine, 4,4‐diaminodiphenyl sulphone, and p‐aminobenzoic acid (PAB), and CF‐reinforced epoxy composites were prepared. The structural and surface characteristics of the functionalized CFs were investigated using X‐ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FT‐IR), and scanning electron microscopy (SEM). Mechanical properties in terms of tensile and flexural strengths and moduli were studied. The FT‐IR results confirm the success in bonding amines on the CF surface. After treatment of CFs, the oxygen and nitrogen contents as well as the N/C ratio showed an increase. XPS results provided evidence of the chemical reaction during functionalization, rather than being physically coated on the CF surface. Chemical modification of CF with diamines led to considerable enhancement in compatibility of CF filaments and epoxy resin, and remarkable improvements were seen in both tensile and flexural properties of the reinforced composites. SEM micrographs also confirmed the improvement of interface adhesion between the modified CFs and epoxy matrix. Finally, it can be concluded that PAB is a promising candidate to functionalize CF in order to improve interfacial properties of CF/epoxy composites. Copyright © 2015 John Wiley & Sons, Ltd.     

Interfacial adhesion and microfailure modes of electrodeposited carbon fiber/epoxy-PEI composites by microdroplet and surface wettability tests

Interfacial properties and microfailure modes of electrodeposition (ED)-treated carbon fiber-reinforced polyetherimide (PEI) toughened epoxy composite were investigated using microdroplet test and the measurement of surface wettability. ED was performed to improve the interfacial shear strength (IFSS). As PEI content increased, IFSS increased due to enhanced toughness and plastic deformation of PEI. In the untreated case, IFSS increased with adding PEI content, and the IFSS of the pure PEI matrix showed the highest. On the other hand, for the ED-treated case IFSS increased with PEI content with rather low improvement rate. In the untreated case, neat epoxy resin appeared brittle microfailure mode, whereas the pure PEI matrix exhibited a more likely ductile microfailure mode. In the ED-treated case, neat epoxy exhibited a more ductile fracture than that of the untreated case. Critical surface tension and polar surface free energy of ED-treated carbon fiber was higher than those of the untreated fiber. The work of adhesion between fiber and matrix was not directly proportional to IFSS for both the untreated and ED-treated cases. The matrix toughness might contribute to IFSS more likely than the surface wettability. Interfacial properties of the epoxy-PEI composite can be affected efficiently by both the control of matrix toughness and ED treatment.     

The direct architecture of carbon fiber‐carbon nanofiber hierarchical reinforcements for superior interfacial properties of CF/epoxy composites

A simple and efficient chemical method was developed to graft directly carbon nanofibers (CNFs) onto carbon fiber (CF) surface to construct a CF‐CNF hierarchical reinforcing structure. The grafted CF reinforcements via covalent ester linkage at low temperature without any usage of dendrimer or catalyst was investigated by FTIR, X‐ray photoelectron spectroscopy, Raman, scanning electron microscopy, atomic force microscopy, dynamic contact angle analysis, and single fiber tensile testing. The results indicated that the CNFs with high density could effectively increase the polarity, wettability, and roughness of the CF surface. Simultaneous enhancements of the interfacial shear strength, flexural strength, and dynamic mechanical properties as well as the tensile strength of CFs were achieved, for an increase of 75.8%, 21.9%, 21.7%, and 0.5%, respectively. We believe the facile and effective method may provide a novel and promising interface design strategy for next‐generation advanced composite structures.     

The mechanical properties of surface treated UHMWPE fibers and TiO2 reinforced PMMA composite

Mechanical properties of hybrid PMMA composites reinforced with UHMWPE fiber and nano‐titanium dioxide (2, 4, 6, and 8 wt%) was investigated. In this work, the effect of UHMWPE fiber surface treatment on tensile, flexural, and impact properties of PMMA composites was studied. The fiber loadings were varied from 0% to 20%. The addition of UHMWPE fiber had caused a decline in the tensile strength of the PMMA composite. Results revealed that the presence of titanium dioxide on the surface treated UHMWPE fiber has further enhanced the efficiency of stress transfer from the matrix to the fiber thus improved the interfacial adhesion between the UHMWPE fiber and PMMA matrix.     

Interface characteristic of aramid fiber reinforced poly(phthalazinone ether sulfone ketone) composite

Interface is an important microstructure for advanced polymer‐matrix composite. The composite interface is the bridge and the link for stress transferring between the fiber and the matrix resin. In this work, oxygen plasma treatment was used for modification of aramid fiber surface. The effects of plasma treatment power on interlaminar shear strength of composite were evaluated by short‐beam shear test. The morphologies of both the aramid fiber surface and its composite interface fracture were observed by SEM. The chemical structure and surface chemical composition of the plasma‐treated and separated fibers were analyzed by Fourier transform infrared (FTIR) and XPS, respectively. The results showed that the interlaminar shear strength of composite was enhanced by 33% with plasma treatment power of 200 W. The FTIR and XPS results indicated that the active functional groups were introduced onto the aramid fiber surface by plasma treatment forming chemical bonds with the poly(phthalazinone ether sulfone ketone) resin. The SEM results proved that the aramid fiber surface was roughened by plasma treatment enhancing the mechanical bond with the poly(phthalazinone ether sulfone ketone) resin. The composite rupture occurred from the composite interface to the fiber or the matrix resin. Copyright © 2017 John Wiley & Sons, Ltd.     

Improving the interfacial property of carbon fiber/PI resin composite by grafting modification of carbon fiber surface

The poor interfacial adhesion between carbon fibers (CFs) and polyimide (PI) resin has seriously hampered the application of CF/PI composites. In this work, the interfacial adhesion was efficiently enhanced by grafting on the CF surface. Surface morphology and surface composition of modified carbon fibers were characterized, which indicated that acrylamide was grafted successfully on the CF surface and the surface roughness was increased slightly. After grafting, the interface shear strength of modified carbon fibers/PI composites was significantly improved by 86.96%, and the interlaminar shear strength was enhanced by 55.61% due to the covalent bonds in interphase and the toughening effect of sizing agent. Moreover, the mechanical properties of composites with different interfacial adhesion were measured, which further confirmed the effect of the grafting modification.     

SiCp/ Al复合材料与化学镀镍层结合机理研究

根据结构化学理论，用SEM, EDAX和XPS等测试手段研究了镀层和碳化硅颗粒增强铝基复合材料(SiC_p/ Al)的表面、断面形貌及界面的结合状态，分析了镀层和基体之间的结合机理。结果表明，Ni镀层与复合材料界面有良好的结合，在复合材料表面的SiC-Al界面，初期沉积物Ni按Al的晶格外延生长出现微晶层，然后吸附原子扩散迁移、碰撞结合并与界面上的SiC晶格匹配生长，在镍层中诱发了拉伸应力。镍晶格和基体粒子之间产生了键合作用，形成的键显示出共价键和离子键的混合性质。     

Improved thermo-oxidative stability of three-dimensional and four-directional braided carbon fiber/epoxy hierarchical composites using graphene-reinforced gradient interface layer

In order to improve the thermo-oxidative stability of three-dimensional and four-directional braided carbon fiber/epoxy composites, we introduced a gradient interphase reinforced by graphene nanoplatelets (GN) between the carbon fiber and the matrix, with a liquid phase deposition strategy. Both the interlaminar shear strength and the flexural strength of the composites were improved after thermo-oxidative aging at 140 °C for various durations (up to 1200 h). The interfacial reinforcing mechanisms are explored by analyzing the structure of the interfacial phase, thermal conductivity, weight loss, surface topography, fiber/matrix interfacial morphology and thermomechanical properties of the composites. Results indicate that the GN-reinforced gradient interphase provides an effective shield against interface oxidation, assists in thermal stress transfer, and restricts the movement of the different phases of materials at the composite interface.     

The effect of coating on the stiffness and toughness of encapsulated fiber composites

The effect of the coating of the fiber on the stiffness and toughness of composite materials is presented in this paper. The type of composite material considered is of a macroscopically isotropic composite medium containing coated fibers. The models used to simulate such materials consists of: the cylindrical fiber, a cylindrical annulus of the coating, an annulus of the matrix enveloped by an infinite region of an equivalent composite consisting of a transversely isotropic material and representing the real composite with dispersed coated fibers. Solutions for the longitudinal, transverse and shear elastic moduli in the four-phase model were established assuming linear elastic conditions. The results were found to depend on the extent and the mechanical properties of the coating. The stiffness and toughness of the composite were evaluated in models representing plane-stress equatorial sections of the representative volume element of the real material according to the Hashin-Rosen model. The stiffness of the fiber composites was studied by varying the rigidity and the extent of the fiber-coating in the model and evaluating its influence on the overall mechanical behavior of the model. On the other hand, the toughness of the composite was evaluated by the method of caustics in models made of composite PMMA plates with PMMA inclusions coated with a ductile annulus. Interesting results were derived concerning the influence of the soft annulus on the mechanical behavior of the composite.     

Probing the tribological behaviors in water of novel poly(phthalazione ether sulfone ketone) and its composites based on the state of aggregation and the microstructure

In this paper, novel poly(phthalazione ether sulfone ketone) (PPESK) and its composites reinforced with carbon fibers (CFs) were prepared, and their tribological behaviors in pure and sea water were comparatively investigated. Affected by the noncoplanar twisted aromatic structure in the molecular skeleton, the aggregation of the macromolecular chain in PPESK was amorphous, resulting in very high water absorption of PPESK matrix. The invading water molecules led to a sharp decrease in the hardness of PPESK surface, resulting in very high wear rate of PPESK in water. Although CF/PPESK composites had higher water absorption than pure PPESK, their wear processes in water were no longer dominated by high water absorption but by the load‐carrying effect of CFs, ascribed to the good CF/PPESK interfacial adhesion. Therefore, CF/PPESK composites exhibited very low wear rates in the order of 10^?7 mm³/Nm in water, which decreased with the CF content increasing until the content of CFs reached 50%. The results revealed that the most critical factor determining the wear behavior of a fiber‐reinforced polymer composite sliding in water is the fiber/matrix interface but not the water absorption of the polymer matrix. Copyright © 2017 John Wiley & Sons, Ltd.     

Interfacial Improvement of Carbon Fiber/Epoxy Composites by Incorporating Superior and Versatile Multiscale Gradient Modulus Intermediate Layer with Rigid-flexible Hierarchical Structure

In order to enhance the interfacial adhesion of carbon fiber(CF) and polymer matrix, a multiscale gradient modulus intermediate layer with rigid-flexible(GO-PA) hierarchical structure was designed and fabricated between CFs and matrix by a facile and businesslike strategy. The polarity, roughness and wettability of CFs surface as well as the thickness of intermediate layer in composite have been significantly increased after rigid-flexible hierarchical structure was constructed. The IFSS, ILSS, compression and impact toughness manifested that the hierarchical structure could bring about a fantastic improvement(76.8%, 46.4%, 40.7% and 37.8%) for the interfacial and mechanical properties than other previous reports. Consequently, the establishment of CF surface with gradient modulus rigid-flexible hierarchical structure via regulation of nanoparticles and polymer array would open a new, viable and promising route to obtaining high-performance composites.     

The synergetic effect of zinc phthalate and carboxymethyl cellulose–carbon nanotube of glass fibers surfaces on improving strength and toughness of polypropylene composite

The interfacial interaction between glass fibers (GFs) and polypropylene (PP) resin is the key factor which affects the properties of GFs reinforced PP composites. The β-transcrystallization (β-TC) structure induced by β-nucleating agent (β-NA) at the interface is beneficial to improving the interfacial performance and comprehensive mechanical properties. However, due to the poor adhesive ability, it is difficult to introduce β-NAs onto GFs surface directly. In this work, for solving above problem, the sodium carboxymethyl cellulose (CMC) and  NH₂ functionalized multiwalled carbon nanotubes (CNTs) were used to construct the network structure on GFs (CMC-CNT-GF) through plenty of active groups. Furthermore, the zinc phthalate (ZnPht, β-NA) was synthesized and coated on GFs surface by hydrogen bonds interaction with CMC-CNT and physical anchoring effect (ZnPht@CMC-CNT-GF). Finally, the hybrid GFs reinforced PP composite (iPP/ZnPht@CMC-CNT-GF) was prepared, which exhibited enhanced tensile, flexural, and impact strength by 20.1, 9.3, and 33.3%, respectively when compared with the iPP/raw GF due to the formation of β-TC and improvement of interfacial adhesion. This study provides an effective strategy to introduce β-NAs on GFs with network structure for improving interfacial properties by inducing β-TC to enhance the strength and toughness of composite, which could be applied in other fiber/semicrystalline polymer systems.     

Effect of chemical treatment of Kevlar fibers on mechanical interfacial properties of composites

In this work, the effects of chemical treatment on Kevlar 29 fibers have been studied in a composite system. The surface characteristics of Kevlar 29 fibers were characterized by pH, acid-base value, X-ray photoelectron spectroscopy (XPS), and FT-IR. The mechanical interfacial properties of the final composites were studied by interlaminar shear strength (ILSS), critical stress intensity factor (K(IC)), and specific fracture energy (G(IC)). Also, impact properties of the composites were investigated in the context of differentiating between initiation and propagation energies and ductile index (DI) along with maximum force and total energy. As a result, it was found that chemical treatment with phosphoric acid solution significantly affected the degree of adhesion at interfaces between fibers and resin matrix, resulting in improved mechanical interfacial strength in the composites. This was probably due to the presence of chemical polar groups on Kevlar surfaces, leading to an increment of interfacial binding force between fibers and matrix in a composite system.     

Bioinspired Interface Engineering in Elastomer/Graphene Composites by Constructing Sacrificial Metal–Ligand Bonds

It remains a huge challenge to create advanced elastomers combining high strength and great toughness. Despite enhanced strength and stiffness, elastomeric nanocomposites suffer notably reduced extensibility and toughness. Here, inspired by the concept of sacrificial bonding associated with many natural materials, a novel interface strategy is proposed to fabricate elastomer/graphene nanocomposites by constructing a strong yet sacrificial interface. This interface is composed of pyridine‐Zn²⁺‐catechol coordination motifs, which is strong enough to ensure uniform graphene dispersion and efficient stress transfer from matrix to fillers. Moreover, they are sacrificial under external stress, which dissipates much energy and facilitates chain orientation. As a result, the strength, modulus, and toughness of the elastomeric composites are simultaneously strikingly enhanced relative to elastomeric bulk. This work suggests a promising methodology of designing advanced elastomers with exceptional mechanical properties by engineering sacrificial bonds into the interface.