丙烯酸共聚物囊壁的正十八烷微胶囊的制备和性能表征

以二丙烯酸1,4-丁二醇酯为交联剂, 成功制备了甲基丙烯酸甲酯-甲基丙烯酸共聚物为壁材, 正十八烷为囊芯的相变材料微胶囊. 采用扫描电子显微镜(SEM)、差示扫描量热仪(DSC)和热重分析仪(TG)分别考察了单体与芯材投料比、单体浓度和交联剂的含量对微胶囊形貌、相变热性能、热稳定性能的影响. 实验结果表明: 随着单体与芯材投料比或单体浓度的增加, 微胶囊表面均变得致密, 壁厚增加; 随着交联剂含量的增加, 微胶囊的表面变得更加致密光滑, 热稳定性显著增强; 随着单体与芯材投料比的增大, 微胶囊热焓值减小, 被包裹的囊芯含量减少.     

聚二甲基丙烯酸乙二醇酯壁材微胶囊的制备及其表征

采用界面自由基聚合的方法,制备了以聚二甲基丙烯酸乙二醇酯(PEGDMA)为壁材,薄荷素油(DPO)与石蜡或者三辛癸酸甘油酯(GTCC)的混合物为芯材的微胶囊.微胶囊壁材是二甲基丙烯酸乙二醇酯(EGDMA)单体通过界面自由基聚合形成的高聚物PEGDMA.提出了该界面自由基聚合形成PEGDMA的机理过程.利用光学显微镜和扫描电镜探究了乳化剂类型、芯材组成和固化温度对微胶囊形貌的影响.用傅里叶红外光谱对微胶囊的化学结构进行了表征.利用紫外分光光度计测出了未被微胶囊包埋的芯材占总芯材的百分比(free oil).并用热重分析仪分析了微胶囊的热稳定性能,讨论了固化时间对微胶囊热性能的影响.结果表明,采用阿拉伯树胶为乳化剂,芯材组成为质量比M_(DPO)/M_(GTCC)=1∶1,在60℃下固化1 h,制备出的微胶囊为饱满的球形状,表面光滑.同时测得该体系中芯材的free oil为26.5 wt%.PEGDMA微胶囊在60℃固化温度下反应3 h,具有很好热稳定性,且固化温度升高能提高微胶囊的热稳定性.所制备的微胶囊无毒,在个人护理品和医药领域具有广泛的应用前景.     

以聚脲为囊壁薄荷素油微胶囊的制备及表征

采用界面聚合法,以薄荷素油为芯材,以异佛尔酮二异氰酸酯为壁材单体,在催化剂四甲基乙二胺作用下和水反应形成聚脲外壳,制备出了薄荷素油微胶囊.通过扫描电镜、激光粒度分析仪、傅里叶红外光谱仪及热重分析仪分别对香精微胶囊的表面形貌、粒径分布、单体反应情况和热稳定性进行了分析表征.通过紫外可见分光光度计对香精微胶囊包覆率进行了测定.并分析了均质化速率和微胶囊平均粒径的关系以及不同乳化剂种类和芯壁比条件下微胶囊的形貌特征.结果表明,微胶囊平均粒径随均质化速率的增大而减小,下降到1μm左右时趋于平稳,当乳化剂采用聚乙烯醇且芯壁比为4∶1时,微胶囊形貌最佳,为规整球形.最终测得微胶囊芯材包覆率为84.09 wt%,粉末状微胶囊样品含油率为72.64 wt%,并且微胶囊芯材具有良好的热稳定性.     

一种致密的相变储能微胶囊的制备与表征

制备了以聚脲为第一壁材、苯乙烯-二乙烯苯为第二壁材,以相变点在16℃左右的石蜡为芯材的相变储能微胶囊。采用红外光谱、差示扫描量热分析、热重分析测试技术表征了制备的相变储能微胶囊的结构组成以及热性能;采用溶剂淋洗法研究了影响包覆率的因素。结果表明,相变储热微胶囊是复合相变材料,微胶囊的热稳定性好,致密性优良;通过对水油比、乳化剂及苯乙烯-二乙烯苯用量等各因素对微胶囊包覆率影响的讨论,得出在水与油质量比3.2,乳化剂相对于水的质量分数为2%时,加入苯乙烯与二乙烯苯质量比为10∶1混合液的质量分数为6.0%时,其包覆率达81.14%;制备的微胶囊能耐较高温度,在150℃以下无质量损失,且微胶囊储热能力高达80J/g。同时发现,储热能力与芯壁比有关,比值越大储热潜能越高。     

乳化工艺对微胶囊型硬脂酸相变材料热性质的影响

以硬脂酸为芯材, 碳酸钙为壁材, 采用原位聚合法制备了微胶囊型相变材料; 通过扫描电子显微镜、 红外光谱及差热-热重分析对其表面形貌和热性质进行了表征; 通过改变乳化剂的种类及用量, 研究了乳化工艺对微胶囊型相变材料表面形貌、 相变温度和包覆率的影响. 实验结果表明, 在选用的3种乳化剂十二烷基苯磺酸钠、 十六烷基三甲基溴化铵和曲拉通X-100中, 十二烷基苯磺酸钠相对效果最好, 乳化剂与芯材最佳质量比为0.5%, 相变温度为112.24 ℃时, 封装率达到92.1%.     

石蜡/P(MMA-co-AA)核壳结构相变蓄能微胶囊的制备

以熔点在58~60℃的半精炼石蜡作为相变芯材,与单体、分散剂水溶液形成核壳结构分散液,室温下自由基聚合制备甲基丙烯酸甲酯-丙烯酸的共聚物(P(MMA-co-AA))为壳材的微胶囊.分别用相差显微镜、扫描电镜、差示扫描量热分析仪和傅里叶变换红外光谱仪测定了微胶囊的形貌、热性能和壳材化学结构.微胶囊的直径范围为1~5μm,其中相变芯材的含量可达70%左右,具有较高的相变潜热(99 J/g),有望应用于空调、供暖等领域.     

相变物质正十四醇微胶囊的制备与表征综合化学实验

为将相变储能材料这一前沿研究领域引入到本科教学实验中,特推荐一个综合性研究实验--相变物质正十四醇微胶囊的制备与表征。首先采用原位聚合法制备以正十四醇为芯材的相变微胶囊,然后运用红外光谱仪、扫描电子显微镜和差示扫描量热法分别对微胶囊的化学结构、形貌和储热性能进行了表征。该实验的制备部分可使学生熟悉高分子化学中缩聚反应原理以及微胶囊制备中常用的原位聚合法,对产物的测试和表征有利于加深学生对红外光谱法和差示扫描量热法的理解。实验过程既锻炼了学生的动手操作能力,也培养了学生的科研创新能力。     

细粒径石蜡微胶囊相变材料的制备与性能

采用阳离子和非离子复配乳化剂,通过原位聚合制备以丙烯酸酯为壁材,石蜡为芯材的细粒径微胶囊相变材料.采用傅里叶变换红外光谱(FTIR)、扫描电子显微镜(SEM)、差示扫描量热(DSC)、热重(TG)及激光粒度仪分析表征了微胶囊相变材料的化学结构、表面形貌和热性能.结果表明,乳化剂的种类和壁材单体的配比对微胶囊性能有重要的影响.当采用阳离子和非离子复配乳化剂,壁材中单体甲基丙烯酸甲酯(MMA)与丙烯酸(AA)的质量比为9∶1时,微胶囊相变材料呈球形且表面光滑紧凑,尺寸仅为0.2~0.35μm,具有良好的储热能力,相变潜热高达169 J/g;微胶囊中壁材对石蜡芯材的分解具有明显热阻滞作用,分解温度比纯石蜡提高了150℃.     

石蜡相变微胶囊的制备与表征

采用复乳交联法制备了以相变石蜡为芯材、壳聚糖为壁材的新型储能相变微胶囊。 此相变微胶囊具有很高的相变焓值（可达110 J/g以上）,并且可以根据具体需要改变芯材的温度;TGA研究表明,该相变微胶囊具有很好的热稳定性,在150 ℃以下可以稳定存在;由于壳材料进行了化学交联反应,使得该相变微胶囊具有很好溶剂稳定性,可以在水、乙醇和乙醚等常见溶剂中稳定存在。     

石墨烯/正十八烷微胶囊的制备与及其热性能研究

以石墨烯/正十八烷为芯材,三聚氰胺-尿素-甲醛树脂(MUF)为壁材,苯乙烯马来酸酐共聚物(SMA)为乳化剂,采用乳液聚合法制备相变微胶囊.系统研究了石墨烯对于正十八烷微胶囊性能的影响.采用场发射扫描电子显微镜(FE-SEM)、傅里叶变换红外光谱分析仪(FTIR)、拉曼光谱仪、X射线衍射仪(XRD)、Hot Disk热常数分析仪、示差扫描量热仪(DSC)和热重分析仪(TGA)对相变微胶囊的外貌形态、晶型结构和热性能进行表征和分析.结果表明,微胶囊呈圆球形且光滑,粒径约为1~30μm.当石墨烯添加量为0.1 g时,微胶囊的形貌无明显变化.当加入过量石墨烯时,微胶囊出现了明显的团聚现象.XRD测试表明,包覆于微胶囊中的石墨烯没有使微胶囊的结晶峰位置发生明显的偏移,这对于微胶囊的实际应用是有利的.微胶囊的相变热焓和包覆率随着石墨烯的加入而不断减小,但芯材的过冷现象得到了明显的改善.石墨烯对于微胶囊传热性能的提升有着显著的效果.当石墨烯的添加量为0.2 g时,微胶囊的导热系数为0.092 W·m-1·K-1,与纯微胶囊相比提高了约51%,这说明石墨烯改善了传统相变微胶囊的传热性能,提升了相变微胶囊的应用性能.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.