十八烷/聚(St-MMA)相变微胶囊制备及表征

采用乳液聚合的方法,分别选取聚苯乙烯(PS)、聚甲基丙烯酸甲酯(PMMA)或苯乙烯和甲基丙烯酸甲酯的共聚物为壁材,正十八烷为芯材,十二烷基苯磺酸钠(SDBS)为乳化剂,制作相变储能微胶囊。用粒径分析仪、透射电子显微镜(TEM)、热重分析仪(TG)和示差扫描量热测试仪(DSC)对微胶囊的形貌、相变热性能和热稳定性分别进行表征。结果表明:壁材选取两者共聚物,当两种单体的比例为St∶MMA=1∶5,SDBS用量为1.5g(总质量的3%)时,微胶囊粒径大小均匀,粒子分散性好,壁材的包裹性好。微胶囊的放热峰为起始温度为27.3℃,终止温度为31.9℃,相变温度为28.9℃,相变焓为48.4J/g。TG表明长期使用温度不能超过131℃。IR分析微胶囊中含有芯材和壁材。这种十八烷/聚(St-MMA)相变微胶囊可以用于诸能材料。     

丙烯酸共聚物囊壁的正十八烷微胶囊的制备和性能表征

以二丙烯酸1,4-丁二醇酯为交联剂, 成功制备了甲基丙烯酸甲酯-甲基丙烯酸共聚物为壁材, 正十八烷为囊芯的相变材料微胶囊. 采用扫描电子显微镜(SEM)、差示扫描量热仪(DSC)和热重分析仪(TG)分别考察了单体与芯材投料比、单体浓度和交联剂的含量对微胶囊形貌、相变热性能、热稳定性能的影响. 实验结果表明: 随着单体与芯材投料比或单体浓度的增加, 微胶囊表面均变得致密, 壁厚增加; 随着交联剂含量的增加, 微胶囊的表面变得更加致密光滑, 热稳定性显著增强; 随着单体与芯材投料比的增大, 微胶囊热焓值减小, 被包裹的囊芯含量减少.     

具有薄荷香味的相变微胶囊的制备与表征

利用界面聚合法,以异佛尔酮二异氰酸酯与己二胺为单体聚合形成的聚脲为外壳,以正十八烷、薄荷素油的混合物为芯材,制备了具有薄荷香味的相变微胶囊。利用光学显微镜、扫描电镜、红外光谱仪、差示扫描量热仪、热重分析仪等对微胶囊的形貌、化学结构和热性能进行了表征。结果表明:制备的微胶囊为球形,平均粒径约7.0μm,有较高的储热能力和较好的热稳定性;芯材中添加8.3%的正十四醇或高熔点石蜡,可很好地抑制相变微胶囊的过冷现象。     

硅橡胶包覆十八烷/聚(St-MMA)储能微胶囊复合材料制备及热性能

以十八烷/聚(苯乙烯-甲基丙烯酸甲酯)(P(St-MMA))微胶囊为相变材料,硅橡胶作为载体,制备了十八烷/P(St-MMA)/硅橡胶复合材料。研究了微胶囊的加入方式及加入量,硅橡胶包覆方法。通过红外光谱(IR)和扫描电镜(SEM)研究复合材料的结构和形貌。通过力学性能测试如拉伸强度、扯断伸长率,确定最佳的加工方法。通过热重分析法(TG)、差示扫描量热法(DSC)和储热性能对复合材料的热性能进行研究。结果表明,十八烷制成微胶囊加入到硅橡胶中,且微胶囊加入量是2份时,十八烷/P(St-MMA)微胶囊/硅橡胶的热稳定性热稳定性及力学性能较好。室温硅橡胶包覆微胶囊掺混固化法制备的复合材料的力学性能优于直接共混后热固化法和混炼涂抹后热固化法。十八烷/P(MMA-St)/硅橡胶复合材料的焓值为67.6J/g,储能效果好。     

纳米二氧化硅改性石蜡微胶囊相变储能材料的研究

以石蜡为芯材,甲基丙烯酸甲酯-丙烯酸共聚物为壁材,纳米SiO2为改性剂,采用原位聚合法制备了石蜡微胶囊相变储能材料,系统研究了添加纳米SiO2对石蜡微胶囊相变材料性能的影响;采用傅里叶变换红外光谱(FTIR)、扫描电子显微镜(SEM)、示差扫描量热法(DSC)和热重分析(TGA)等对石蜡微胶囊相变材料的化学结构、表面形貌和热性能进行了表征.研究表明,纳米SiO2能够有效提高微胶囊壁材的热稳定性,当丙烯酸酯壁材中添加3％改性纳米SiO2时,微胶囊呈球形且表面光滑,尺寸250 ～ 300 nm,具有良好的储热能力,相变潜热高达134.79 J/g,分解温度比未添加改性纳米SiO2的石蜡微胶囊提高了40 K,经过1000次热循环测试,石蜡渗漏率仅2.96％.     

细粒径石蜡微胶囊相变材料的制备与性能

采用阳离子和非离子复配乳化剂,通过原位聚合制备以丙烯酸酯为壁材,石蜡为芯材的细粒径微胶囊相变材料.采用傅里叶变换红外光谱(FTIR)、扫描电子显微镜(SEM)、差示扫描量热(DSC)、热重(TG)及激光粒度仪分析表征了微胶囊相变材料的化学结构、表面形貌和热性能.结果表明,乳化剂的种类和壁材单体的配比对微胶囊性能有重要的影响.当采用阳离子和非离子复配乳化剂,壁材中单体甲基丙烯酸甲酯(MMA)与丙烯酸(AA)的质量比为9∶1时,微胶囊相变材料呈球形且表面光滑紧凑,尺寸仅为0.2~0.35μm,具有良好的储热能力,相变潜热高达169 J/g;微胶囊中壁材对石蜡芯材的分解具有明显热阻滞作用,分解温度比纯石蜡提高了150℃.     

界面聚合法制备正二十烷微胶囊化相变储热材料

采用界面聚合的方法, 以甲苯鄄2,4-二异氰酸酯(TDI)和乙二胺(EDA)为反应单体, 非离子表面活性剂聚乙二醇壬基苯基醚(OP)为乳化剂, 合成了正二十烷为相变材料的聚脲包覆微胶囊. 结果表明, 二异氰酸酯和乙二胺按质量比1.9:1 进行反应. 以透射电镜和激光粒度分析仪分析微胶囊, 测得空心微胶囊直径约为0.2 μm, 含正二十烷微胶囊约为2-6 μm. 红外光谱分析证明, 壁材料聚脲是由TDI 及EDA 两种单体形成的. 正二十烷的包裹效率约为75%. 微胶囊的熔点接近囊芯二十烷的熔点, 而其储热量在壁材固定时随囊芯的量而变. 热重分析表明, 囊芯正二十烷、含正二十烷的微胶囊以及壁材料聚脲, 能够耐受的温度分别约为130 ℃、170 ℃及270 ℃.     

石蜡/P(MMA-co-AA)核壳结构相变蓄能微胶囊的制备

以熔点在58~60℃的半精炼石蜡作为相变芯材,与单体、分散剂水溶液形成核壳结构分散液,室温下自由基聚合制备甲基丙烯酸甲酯-丙烯酸的共聚物(P(MMA-co-AA))为壳材的微胶囊.分别用相差显微镜、扫描电镜、差示扫描量热分析仪和傅里叶变换红外光谱仪测定了微胶囊的形貌、热性能和壳材化学结构.微胶囊的直径范围为1~5μm,其中相变芯材的含量可达70%左右,具有较高的相变潜热(99 J/g),有望应用于空调、供暖等领域.     

一种致密的相变储能微胶囊的制备与表征

制备了以聚脲为第一壁材、苯乙烯-二乙烯苯为第二壁材,以相变点在16℃左右的石蜡为芯材的相变储能微胶囊。采用红外光谱、差示扫描量热分析、热重分析测试技术表征了制备的相变储能微胶囊的结构组成以及热性能;采用溶剂淋洗法研究了影响包覆率的因素。结果表明,相变储热微胶囊是复合相变材料,微胶囊的热稳定性好,致密性优良;通过对水油比、乳化剂及苯乙烯-二乙烯苯用量等各因素对微胶囊包覆率影响的讨论,得出在水与油质量比3.2,乳化剂相对于水的质量分数为2%时,加入苯乙烯与二乙烯苯质量比为10∶1混合液的质量分数为6.0%时,其包覆率达81.14%;制备的微胶囊能耐较高温度,在150℃以下无质量损失,且微胶囊储热能力高达80J/g。同时发现,储热能力与芯壁比有关,比值越大储热潜能越高。     

界面聚合法制备正二十烷微胶囊化相变储热材料

用界面聚合的方法,以甲苯-2,4-二异氰酸酯(TDI)和己二胺(HDA)为反应单体,非离子表面活性剂聚乙二醇壬基苯基醚(OP)为乳化剂,合成了正二十烷为相变材料的聚脲包覆微胶囊. 结果表明,二异氰酸酯和己二胺按质量比为1.5∶ 0.8进行反应. 空心微胶囊的直径约为0.2 μm,含正二十烷微胶囊直径为2~6 μm. 红外光谱分析证明, 囊壁聚脲是由TDI及HDA 2种单体形成. 正二十烷包裹效率为65%~80%. 微胶囊的熔点接近囊芯正二十烷的熔点,而其储热量在壁材固定时随囊芯的量而变. 热重分析结果表明,囊芯正二十烷、含正二十烷的微胶囊以及壁材聚脲,能够耐受的温度分别约为130、165及250 ℃.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.