静电纺丝技术制备Tb（BA）3phen/PANI/PVP光电双功能复合纳米纤维

采用静电纺丝技术将聚苯胺(PANI)和稀土配合物[Tb(BA)3phen]掺杂到高分子材料(PVP)中,制备出一类新型的具有光电双功能的Tb(BA)3phen/PANI/PVP复合纳米纤维.用扫描电子显微镜(SEM)、X射线能量色散谱仪(EDS)、荧光光谱仪及宽频介电松弛谱仪对样品进行了表征.结果表明,复合纳米纤维直径为(331±43)nm.在276 nm紫外光激发下,Tb(BA)3phen/PANI/PVP复合纳米纤维发射出主峰位于491,547和585 nm的绿光,对应Tb3+的5D4→7F6,5D4→7F5和5D4→7F4跃迁.当Tb(BA)3phen∶PANI∶PVP的质量比为15∶10∶100时,复合纳米纤维的荧光发射最强,其电导率随PANI含量的增大而升高,在PANI∶PVP为50%(wt%)时,其电导率在高频(106Hz)下达1.531×10-6S/cm.     

静电纺丝制备Eu(BA)3phen/PANI/PVP光电双功能复合纳米纤维及其性能

采用静电纺丝技术将聚苯胺(PANI)和稀土配合物Eu(BA)3phen掺杂到高分子材料聚乙烯吡咯烷酮(PVP)中, 制备出新型的具有光电双功能的Eu(BA)3phen/PANI/PVP复合纳米纤维. 采用扫描电子显微镜、 X射线能量色散谱仪、 荧光光谱仪及宽频介电松弛谱仪对样品进行了表征. 实验结果表明, 复合纳米纤维直径为(270±31) nm. 在275 nm紫外光激发下, Eu(BA)3phen/PANI/PVP复合纳米纤维发射出主峰位于580, 594和617 nm的红光, 对应于Eu3+的 5D0→7F0, 5D0→7F1和5D0→7F2跃迁. 当m[Eu(BA)3phen]:m(PANI):m(PVP)=15:10:100 时, 复合纳米纤维的荧光发射最强. 复合纤维的电导率随PANI含量的增大而升高. 在m(PANI):m(PVP)=50:100时, 其电导率在高频(106 Hz)下达到1.5×10-6 S/cm.     

三苯胺-噁二唑超支化共轭聚合物的多光子泵浦绿色荧光

采用钯催化Heck反应制备了一种新型三苯胺-噁二唑超支化荧光聚合物PI. 用飞秒Ti:sapphire激光研究了PI的三光子和双光子上转换荧光光谱, 激发波长位于近红外区(800~1350 nm). 在1280 nm和80 fs激光激发下, PI的三光子上转换荧光发射波长分别为525 nm(THF), 534 nm(CH2Cl2)和578 nm(DMF). 在800 nm和150 fs激光激发下, PI的双光子上转换荧光发射波长分别为527 nm(THF), 532 nm(CH2Cl2)和573 nm(DMF). 采用非线性透过率法测定荧光聚合物PI的三光子和双光子吸收系数. 系统研究了PI的线性吸收和透过、单光子荧光、荧光寿命、前线轨道能级及热稳定性. 实验结果表明, 三苯胺-噁二唑超支化共轭聚合物的多光子吸收和上转换荧光发射性能比树型分子或线型聚合物更为优异.     

模仿绿色荧光蛋白的荧光聚合物的合成和光学性质研究

受绿色荧光蛋白(GFP)荧光增强原理启发,采用开环聚合制备了两亲性聚乙二醇-生色团-聚己内酯(PEG-c-PCL)嵌段聚合物.通过核磁共振氢谱和碳谱(1H-,13C-NMR)、傅立叶变换红外光谱(FTIR)、凝胶渗透色谱(GPC)和紫外可见吸收光谱(UV-Vis)等证明其结构和性质.生色团和聚合物有相似的紫外吸收光谱,且最大吸收峰都在371 nm.荧光发射光谱表明,生色团的发射峰在427 nm,但聚合物的荧光发射峰出现了6 nm的红移,这是高分子化引起的结果.透射电镜(TEM)和动态光散射(DLS)证明了该两亲性嵌段聚合物能够组装成为纳米粒子.当聚合物组装成纳米粒子后,荧光强度增大了55倍,并且荧光发射峰出现了14 nm的红移,这些现象可归结于荧光生色团自由旋转的限制和组装导致的相互作用增强.     

吡啶星型分子的双光子上转换荧光特性

用飞秒Ti:sapphire激光测定了一种星型吡啶分子2,5-二{4-{4-[N,N-二(4-吡啶乙烯基)苯基氨基]苯乙烯基}苯基}-1,3,4-噁二唑(PyPASPO)的双光子吸收截面及上转换荧光光谱.采用非线性透过率法测得二氯甲烷和四氢呋喃溶液中的其双光子吸收截面分别为412.5 和288.8 GM. 系统研究了吡啶星形分子PyPASPO的线性吸收和透过、单光子荧光、荧光寿命及激发-发射三维荧光谱和前线轨道能级. 在800 nm和150 fs钛宝石激光器激发下PyPASPO在二氯甲烷和四氢呋喃溶液中的双光子上转换荧光发射波长分别位于571和 525 nm,在二氯甲烷溶液中单光子荧光峰位于532 nm,荧光寿命为1.24 ns. HOMO和LUMO能级分别为-5.21 eV和-2.92 eV.增大分子内电荷转移有效增强了吡啶星形分子的双光子吸收和双光子上转换荧光发射能力     

镧系金属有机骨架比例荧光检测萘普生

该文构筑了双荧光发射的比例型荧光传感器,并将其用于萘普生检测。以Eu3+为金属节点,1,3,5-苯三甲酸为配体,通过超声法合成了比例型荧光传感材料Eu-MOF。探究了Eu-MOF的形貌特征、光学性质及对萘普生的检测机理。单一激发光照射下,Eu-MOF呈现源于配体和Eu3+的双荧光发射峰。萘普生的荧光发射峰与Eu-MOF在375 nm处的荧光发射峰重合,且两者之间具有内滤光效应。因此,随着萘普生的逐渐加入,Eu-MOF在375 nm处的荧光发射峰强度逐渐增强,而623 nm处则逐渐减弱,从而可实现对萘普生的比例荧光检测。Eu-MOF检测萘普生的线性范围为0.07~2.3μmol/L,检出限为0.039μmol/L。Eu-MOF在萘普生的检测中表现出良好的选择性和抗干扰能力,是实际样品中萘普生检测的优势材料。     

9-戊基咔唑-3,6-双-(炔苯基-4-甲酸乙酯)的合成与双光子特性研究

采用钯催化的碳碳偶合反应合成了9-戊基咔唑-3,6-双-(炔苯基-4-甲酸乙酯)(I).进一步研究了化合物I在四氢呋喃和40%四氢呋喃水溶液中的光物理性质,结果显示,化合物I在40%四氢呋喃水溶液中的紫外吸收峰位置与其四氢呋喃溶液相比没有发生明显移动,它在40%四氢呋喃水溶液中的单光子荧光发射峰出现在453 nm,较其在四氢呋喃溶液的发射有42 nm红移,其荧光量子效率为0.44.用波长为660 nm飞秒激光激发时,化合物I在40%四氢呋喃水溶液中的双光子荧光发射最大峰红移至489 nm,其双光子吸收截面值为251GM,比其在四氢呋喃溶液中的截面(151 GM)增强了60%.     

固液态均荧光发射的四苯乙烯基衍生物的合成

为了打破传统荧光材料的聚集荧光淬灭(ACQ)的应用限制,通过共价键连接聚集诱导发光(AIE)分子与平面ACQ分子,可以构建在溶液中和固态下都具有荧光发射特性的化合物。分别通过多步反应合成了带有烷基硫醚的萘酰亚胺衍生物3和连接炔吡啶的四苯乙烯衍生物7。化合物3和化合物7通过酰胺缩合,合成了一种四苯乙烯-萘酰亚胺二联体化合物8,化合物8兼具ACQ和AIE分子的特性。结果表明：溶液状态下化合物8具有蓝色荧光发射,其最大发射峰位于452 nm,固态下为黄绿色荧光,最大发射峰位于487 nm。利用三氟乙酸对其荧光进行调控能够实现CIE色坐标为(0.33, 0.32)的单分子白光发射。     

一种红光发射三苯胺吡啶盐的合成及荧光探针性质

以双碘代芳醛4-[N,N-二(4-碘苯基)氨基]苯甲醛与4-乙烯基吡啶通过钯催化双位点Heck偶联反应制备了中间体TPAPy,TPAPy再与碘代十八烷反应得到吡啶盐衍生物TPAPyS.目标化合物的结构经过红外光谱、核磁共振谱、高分辨质谱确认,测定了吡啶盐TPAPyS在固态、水溶液中及乙醇/水混合溶液中的荧光光谱.吡啶盐TPAPyS在固体状态下发出暗红色荧光,荧光发射峰为654 nm,测得固体量子产率为3.83%.TPAPyS在水溶液中发出红色荧光,荧光发射峰为647 nm.在乙醇/水混合溶液中,化合物TPAPyS的荧光发射峰位于612~640 nm.测定了吡啶盐TPAPyS与牛血清蛋白(BSA)、胱氨酸(DCys)及半胱氨酸(Cys)在生理条件下的光谱行为,吡啶盐TPAPyS与BSA、氨基酸作用后荧光发射强度均增加.吡啶盐TPAPyS是一种可溶于水的红光发射材料,荧光发射峰位于近红外波段,可作为荧光探针用于牛血清蛋白和氨基酸的检测.     

一种具有ESIPT和AIEE荧光探针的合成及对Zn2+的识别

利用2-氨基苯并噻唑和5-甲基-2-羟基间苯二甲醛合成了一种具有聚集荧光增强性质的简单高效的荧光探针M,通过~1H-NMR、~(13)C-NMR表征了其结构。探针M在545 nm处有最大吸收峰,在甲醇∶水(7∶3)的体系下,向探针M中加入金属阳离子,发现只有加入Zn~(2+)时,表现出明显的荧光增强且发射波长发生明显的蓝移现象,在495 nm处出现最强吸收峰,检测限为9.638×10~(-6 )M,具有较高的灵敏度和良好的识别效果。     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.