温和条件下混合碱辅助水热合成硅酸镁纳米管

在混和碱的辅助下,以普通氢氧化镁和二氧化硅粉末为原料在温和条件下高效合成硅酸镁纳米管。采用XRD,TEM,FTIR,氮气吸附等多种手段对产物进行了表征,并对其合成过程进行了研究。结果表明氢氧化钠和氢氧化钾的共融液能提高反应物间的溶解性,促进反应可以在温和条件下加快进行。250℃下合成硅酸镁纳米管,传统水热法至少需要7 d,混合辅助水热合成只需36 h。与传统的水热法相比,混和碱辅助的水热法是一种温和且高效的过程。     

制备均一形貌的长二氧化钛纳米管

在温和的水热条件下,用碱溶液处理不同粒径的锐钛矿相和金红石相二氧化钛 纳米粉体,得到了不同形貌的二氧化钛纳米管,并用TEM,XRD,FT-Raman和BET等 对其进行了表征。金红石相的超细纳米晶有利于形成均一形貌的纳米管,用粒径仅 为7.2 nm的金红石相纳米粉体为前驱体得到了长度为500 nm的长二氧化钛纳米管。 用纳米晶反应活性对晶粒尺寸的依赖性及晶相稳定性解释了长纳米管的形成机理。     

制备均一形貌的长二氧化钛纳米管

在温和的水热条件下，用碱溶液处理不同粒径的锐钛矿相和金红石相二氧化钛 纳米粉体，得到了不同形貌的二氧化钛纳米管，并用TEM，XRD，FT-Raman和BET等 对其进行了表征。金红石相的超细纳米晶有利于形成均一形貌的纳米管，用粒径仅 为7.2 nm的金红石相纳米粉体为前驱体得到了长度为500 nm的长二氧化钛纳米管。 用纳米晶反应活性对晶粒尺寸的依赖性及晶相稳定性解释了长纳米管的形成机理。     

无溶剂研磨条件下四氢苯并吡喃衍生物的一锅法合成

四氢苯并吡喃衍生物在药物和农药研究中有着广泛的用途. 基于合成这类化合物的传统方法所用溶剂多为对环境不利的极性溶剂, 且合成需分步进行, 在提倡绿色化学和发展节约型经济的今天, 如何改良这类反应已成为一个热点. 本工作通过选择不同的碱尝试反应最佳条件, 发现用价廉易得的碳酸钾为碱, 对不同官能团取代的底物芳醛采用研磨的手段, 在无溶剂条件下, 一锅法可成功合成四氢苯并吡喃衍生物. 该法条件温和, 收率高, 易于操作, 对环境影响小.     

水热法合成MOS2/CNT同轴纳米管

采用水热法合成了MoS2/CNT同轴纳米管．对合成的MoS2/CNT同轴纳米管用高分辨透射电镜(HRTEM)、X射线衍射(XRD)和电子能谱(EDS)方法对其进行了鉴定和表征，发现所制备的MoS2/CNT同轴纳米管结构完好，在CNT的外表面包覆了3～4层MoS2管．初步分析了MoS2/CNT的形成机理．     

利用偏钛酸浆料制备大比表面纳米管钛酸工艺的研究

以偏钛酸浆料为原料通过水热法合成了纳米管钛酸,并采用TEM,比表面积测定仪等分析手段观察其形貌和管径大小,测定了其比表面积和孔体积.同时运用正交实验法考察了反应温度、反应时间对纳米管钛酸比表面积和孔体积的影响.实验结果表明,所制备的纳米管钛酸平均比表面积高达 340m2 /g,最佳的制备工艺是:工业碱NaOH的质量分数为 25. 7 %、偏钛酸浆料的质量分数为 17. 1 %、后处理酸度为pH=1、反应温度为 120℃、反应时间为 20h.     

TiO2-B纳米管负载过渡金属氧化物的电化学嵌锂性能

采用碱性条件下的水热法合成了质子钛酸盐纳米管,在此基础上采用化学沉淀方法制备了负载过渡金属(Co,Ni和Cu)氢氧化物的纳米管材料,然后在300 ℃氩气氛下烧结后得到负载过渡金属(Co,Ni和Cu)氧化物TiO₂-B纳米管。采用XRD和TEM等对其结构与形态进行了表征,采用恒电流充放电、循环伏安以及交流阻抗测试研究了其电化学嵌/脱锂性能。结果表明,TiO₂-B纳米管通过负载过渡金属(Co,Ni和Cu)氧化物纳米颗粒之后,改善了TiO₂-B纳米管的高倍率放电性能和循环稳定性。其中,负载NiO和CuO的TiO₂-B纳米管的高倍率放电性能和循环稳定性较为突出。研究还表明,负载过渡金属氧化物纳米颗粒后,有助于保持TiO₂-B纳米管在动态反应条件下的拟电容反应控制特征,并不同程度地减小了TiO₂-B纳米管的表面电荷转移电阻,这是TiO₂-B纳米管的电化学性能改善的主要原因。     

哌嗪季铵碱催化剂的合成及其在异氰酸酯聚合反应中的应用

在温和条件下合成了一种用于脂肪族异氰酸酯聚合反应的哌嗪类双季铵碱催化剂, 制备过程简单, 且催化剂具有较高的催化活性和选择性, 催化反应所生成的聚合产物中所需的三聚体成分较高, 产物色度较低.     

高比表面积CuPc/TiO2纳米管复合材料的制备及其可见光光催化活性

以P25为前驱体,在碱性条件下采用水热法制备了TiO2纳米管(NT),然后通过浸渍法将敏化剂酞菁铜(CuPc)附着于TiO2NT表面,制得可见光响应的CuPc/TiO2NT复合光催化材料,并对其进行了表征,考察了它在可见光下降解罗丹明B的光催化活性.结果表明,在NaOH碱性条件下水热法制备的TiO2NT具有较大的比表面...     

烯丙基作为保护基在修饰寡核苷酸合成中的应用

研究了烯丙基作为核苷糖环羟基保护基在寡核苷酸及其类似物的合成中应用的可能性。烯丙基保护基可用PdCl2在温和条件下脱除,适合应用于对碱不稳定的寡核苷酸的合成。应用烯丙基保护基成功地合成了三胸苷二碳酸酯和二胸苷亚硫酸酯。     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.