Biophysical aspects of agar-gel supported bilayer lipid nembranes: a new method for forming and studying planar bilayer lipid membranes

Conventional bilayer lipid membranes (BLMs), formed by either the painting method or the Langmuir-Blodgett technique, lack the desired stability. This paper presents a simple method for forming long-lived BLMs on agar-gel supports. The supported BLM reported has a greatly improved mechanical stability and also has desirable dynamic properties. These self-assembled BLMs are of significant interest, in view of their similarity of biological membranes, their molecular dimension and their spontaneous formation.     

Formation of artificial lipid bilayers using droplet dielectrophoresis

We describe the formation of artificial bilayer lipid membranes (BLMs) by the controlled, electrical manipulation of aqueous droplets immersed in a lipid-alkane solution. Droplet movement was generated using dielectrophoresis on planar microelectrodes covered in a thin insulator. Droplets, surrounded by lipid monolayers, were brought into contact and spontaneously formed a BLM. The method produced BLMs suitable for single-channel recording of membrane protein activity and the technique can be extended to create programmable BLM arrays and networks.     

Polymerized planar suspended lipid bilayers for single ion channel recordings: comparison of several dienoyl lipids

The stabilization of suspended planar lipid membranes, or black lipid membranes (BLMs), through polymerization of mono- and bis-functionalized dienoyl lipids was investigated. Electrical properties, including capacitance, conductance, and dielectric breakdown voltage, were determined for BLMs composed of mono-DenPC, bis-DenPC, mono-SorbPC, and bis-SorbPC both prior to and following photopolymerization, with diphytanoyl phosphocholine (DPhPC) serving as a control. Poly(lipid) BLMs exhibited significantly longer lifetimes and increased the stability of air-water transfers. BLM stability followed the order bis-DenPC > mono-DenPC ≈ mono-SorbPC > bis-SorbPC. The conductance of bis-SorbPC BLMs was significantly higher than that of the other lipids, which is attributed to a high density of hydrophilic pores, resulting in relatively unstable membranes. The use of poly(lipid) BLMs as matrices for supporting the activity of an ion channel protein (IC) was explored using α-hemolysin (α-HL), a model IC. Characteristic i-V plots of α-HL were maintained following photopolymerization of bis-DenPC, mono-DenPC, and mono-SorbPC, demonstrating the utility of these materials for preparing more durable BLMs for single-channel recordings of reconstituted ICs.     

Photopolymerization of mixed monolayers and black lipid membranes containing gramicidin A and diacetylenic phospholipids

We formed monolayers and black lipid membranes (BLMs) of photopolymerizable lipids mixed with the channel-forming protein gramicidin A to evaluate their miscibility and the potential for improved stability of the BLM scaffold through polymerization. Analyses of surface pressure vs area isotherms indicated that gramicidin A dispersed with three different synthetic, polymerizable, diacetylene-containing phospholipids, 1,2-di-10,12-tricosadiynoyl-sn-glycero-3-phosphocholine (DTPC), 1,2-di-10,12-tricosadiynoyl-sn-glycero-3-phosphoethanolamine (DTPE), and 1-palmitoyl-2,10,12-tricosadiynoyl-sn-glycero-3-phosphoethanolamine (PTPE) to form mixed monolayers at the air-water interface on a Langmuir-Blodgett (LB) trough. Conductance measurements across a diacetylenic lipid-containing BLM confirmed dispersion of the gramicidin channel with the lipid layer and demonstrated gramicidin ion-channel activity before and after UV exposure. Polymerization kinetics of the diacetylenic films were monitored by film pressure changes at constant LB trough area and by UV-vis absorption spectroscopy of polymerized monolayers deposited onto quartz. An initial increase in film pressure of both the pure diacetylene lipid monolayers and mixed films upon exposure to UV light indicated a change in the film structure. Over the time scale of the pressure increase, an absorbance peak indicative of polymerization evolved, suggesting that the structural change in the lipid monolayer was due to polymerization. Film pressure and absorbance kinetics also revealed degradation of the polymerized chains at long exposure times, indicating an optimum time of UV irradiation for maximized polymerization in the lipid layer. Accordingly, exposure of polymerizable lipid-containing black lipid membranes to short increments of UV light led to an increase in the bilayer lifetime.     

膜片电极支撑自组装双层脂膜中短杆菌肽离子通道的形成

通过一个两步程序在膜片电极尖端形成自组装双层脂膜：（1）膜片电极尖端沾取成膜液；（2）将吸附成膜液的尖端浸入电解液中，排除尖端多余的成膜液，通过电学方法监测双层脂膜的形成。将短杆菌肽通道蛋白分散在成膜液和电解质溶液中，在制备膜片电极支撑双层脂膜过程中，短杆菌肽重组到双层脂膜中形成离子通道，对通道的一般特性进行了研究，并观察到通道开放和关闭的现象。     

Differential scanning calorimetry and Fourier transform infrared spectroscopic studies of phospholipid organization and lipid-peptide interactions in nanoporous substrate-supported lipid model membranes

High-sensitivity differential scanning calorimetry was utilized to examine whether lipids capable of forming an inverted nonlamellar hexagonal II (HII) phase can be deposited into nanoporous substrate-supported arrays. Particularly, we compare the thermotropic phase properties of nanoconfined unsaturated 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine lipid bilayers with unsupported dispersions to assess nanoconfinement effects, focusing on the lamellar fluid (Lalpha) to HII phase transition. Experimental results provide direct and clear evidence for the formation of an HII phase upon both heating and cooling. However, a small shift in the Lalpha/HII phase transition temperature, as well as an increase in the magnitude of the associated temperature hysteresis, was observed in the nanoporous substrate-supported system. Additionally, nanoconfinement effects on the interaction and location of the antimicrobial peptide gramicidin S (GS) with nanoporous substrate-supported cardiolipin bilayers were examined by Fourier transform infrared spectroscopy as a function of temperature and phospholipid phase state. Upon heating, GS molecules began to insert into nanoconfined, substrate-supported cardiolipin bilayers at lower temperatures relative to the gel/liquid-crystalline phase transition temperature than into unsupported bilayers. The reduction in the polarity and hydrogen-bonding potential environment of GS in the Lalpha state suggests that GS is located at the polar/apolar interfacial region in both supported and unsupported cardiolipin bilayers and that the capacity of GS to interact with nanoporous substrate-supported cardiolipin bilayers was not significantly hindered by nanoconfinement. These studies further demonstrate the usefulness of supported lipid bilayers inside nanoporous substrates.     

Polymer‐supported half‐titanocene catalysts for the syndiospecific polymerization of styrene

Monocyclopendienyltitanium trichloride (CpTiCl₃) was supported on polymer carriers with different hydroxyl contents, and the supported catalysts were used for styrene polymerization. The supported catalysts exhibited high activity even at low Al/Ti ratios and increased the molecular weight of the products, indicating that polymer carriers could stabilize the active sites. The polymers prepared with unsupported and supported catalysts were extracted with boiling n‐butanone and characterized by carbon nuclear magnetic resonance (¹³C NMR) and differential scanning calorimetry. The polymers obtained by supported catalysts had a high fraction of boiling n‐butanone‐insoluble part and high melting temperatures, but ¹³C NMR results showed that syndiotacticity decreased compared with that of polymers prepared with an unsupported catalyst. ESR study on the supported catalysts confirmed that the active sites supported on the carrier dropped into the solution and formed active sites the same as those in the unsupported system when they reacted with methylaluminoxane. ¹³C NMR analysis showed that the polymerization mechanism of the supported active sites was an active‐site controlled mechanism instead of a chain‐end controlled mechanism of the unsupported active sites. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 127–135, 2000     

细胞色素C在阴离子修饰的盐桥支撑双层类脂膜上的电化学行为及其应用

采用循环伏安法研究了细胞色素C在月桂酸阴离子修饰的盐桥支撑双层类脂膜上的氧化还原反应;对盐桥支撑双层类脂膜的特性、细胞色素C的电化学反应动力学以及有关影响细胞色素C循环伏安行为各种因素进行了详细探讨;并对用该双层类脂膜体系电化学测定细胞色素C进行了初步尝试。     

过渡金属氧化物和金属负载型沸石催化剂上合成 纳米碳管及其表征

采用气相催化沉积法催化合成纳米碳管,比较了不同金属氧化物和金属负载型沸石催化剂以及不同分子筛载体对合成纳米碳管的影响,并用TEM,XRD表征其形貌和结晶度,用DTA-TG考察了纳米碳管的热和稳定性。实验结果表明纳米碳管的形成除了与金属种类有关外,还直接与催化剂的颗粒大小和分散状态有关。粒径在20nm左右的不规则形状的纳米粒子是形成纳米碳管的活性组分,非负载和负载型的催化剂均表明活性组分的粒径与纳米碳管的管径有一定的对应关系。化学提纯后能得到高纯度的纳米碳管;其管壁具有较好的石墨化结构,在空气中的热稳定性大于400℃,而在氮气中能维持到1200℃以上。     

Hydrogels for in situ encapsulation of biomimetic membrane arrays

Hydrogels are hydrophilic, porous polymer networks that can absorb up to thousands of times their own weight in water. They have many potential applications, one of which is the encapsulation of freestanding black lipid membranes (BLMs) for novel separation technologies or biosensor applications. We investigated gels for in situ encapsulation of multiple BLMs formed across apertures in a hydrophobic ethylene tetrafluoroethylene (ETFE) support. The encapsulation gels consisted of networks of poly(ethylene glycol)‐dimethacrylate or poly(ethylene glycol)‐diacrylate polymerized using either a chemical initiator or a photoinitiator. The hydrogels were studied with regards to volumetric stability, porosity, and water permeability. All hydrogels had pore sizes around 7 nm with volumetric changes >2% upon crosslinking. Photoinitiated hydrogels had a lower hydraulic water permeability compared to chemically initiated hydrogels; however, for all hydrogels the permeability was several‐fold higher than the water permeability of conventional reverse osmosis (RO) membranes. Lifetimes of freestanding BLM arrays in gel precursor solutions were short compared to arrays formed in buffer. However, polymerizing (crosslinking) the gel stabilized the membranes and resulted in BLM arrays that remained intact for days. This is a substantial improvement over lifetimes for freestanding BLM arrays. Optical images of the membranes and single channel activity of incorporated gramicidin ion channels showed that the lipid membranes retained their integrity and functionality after encapsulation with hydrogel. Our results show that hydrogel encapsulation is a potential means to provide stability for biomimetic devices based on functional proteins reconstituted in biomimetic membrane arrays. Copyright © 2010 John Wiley & Sons, Ltd.     

The lipid bilayer concept and its experimental realization: from soap bubbles,kitchen sink,to bilayer lipid membranes

The inspiration for lipid bilayer research, without question, comes from the biological world. Although self-assembled bilayer lipid membranes (BLMs) in vitro, were first reported in 1961, experimental scientists have been dealing with BLM-type interfacial adsorption phenomena since Robert Hooke’s time (1672). BLMs (of planar lipid bilayers) have been used in a number of applications ranging from basic membrane biophysics including transport, practical AIDS research, and ‘microchips’ studies, to the conversion of solar energy via water photolysis, to biosensor development using supported bilayer lipid membranes (s-BLMs), and to photobiology comprising apoptosis and photodynamic therapy. This paper presents an overview of the origin of the lipid bilayer concept and its experimental realization, as well as the studies of our laboratory and recent research of others on the use of BLMs as models of certain biomembranes. In addition, we describe briefly our present work on supported BLMs as biosensors and molecular devices; the experiments carried out in close collaboration with colleagues on s-BLMs are delineated.     

PHOTOEFFECTS OF PIGMENTED LIPID MEMBRANES IN A MICROPOROUS FILTER

Abstract. The light-induced voltage and current generated by pigmented lipid membranes have been investigated. The membranes, separating two aqueous solutions, were formed in microporous filters with pore sizes ranging from 0.05 to 8μm in diameter and densities of 10⁵ to 6 × 10⁸ pores/cm². The structure and some physicochemical properties of these membranes are described and compared with those of planar BLMs. Photopotentials up to 400 mV could be developed across these membranes having an effective current of 21μA-cm^-2. These and other parameters (redox couples and lifetime) were studied over a period of days. The advantages of this membrane system such as long-term stability and manipulability are discussed.     

Biosensors for the Rapid Repetitive Detection of Adrenaline Using Stabilized Bilayer Lipid Membranes (BLMs) with Incorporated Calix[4]resorcinarene Receptor

This work uses lipid film based biosensors with incorporated calix[4]resorcinarene receptor (lipophilic macrocyclic host molecule) for the rapid electrochemical detection of adrenaline. Freely‐suspended and metal supported BLMs (composed of egg phosphatidylcholine (PC) and 35% (w/w) dipalmitoyl phosphatidic acid) modified with the resorcin[4]arene receptor were used as one shot sensors to rapidly detect this catecholamine. The interactions of this compound with freely‐suspended BLMs were found to be electrochemically transduced in the form of a transient current signal with duration of seconds, which reproducibly appeared about 14 s after exposure of the membranes to adrenaline. The response time for these BLMs without incorporated receptor for adrenaline was about 1.5 min. The magnitude of the transient current signal was related to the concentration of adrenaline in bulk solution in the micromolar range. Differential scanning calorimetric (DSC) experiments were performed to explore the mechanism of interactions of BLMs with incorporated receptor with adrenaline. The interactions of adrenaline with surface‐stabilized bilayer lipid membranes (sBLMs) with incorporated receptor produced electrochemical ion current increases, which reproducibly appeared within a few seconds after exposure of the membranes to the stimulant. The use of the receptor in sBLMs increased the sensitivity of the method 6‐fold. The current signal increases were related to the concentration of adrenaline in bulk solution in the micromolar range. Stabilized lipid membranes formed by polymerization on glass fiber microfilters were used as practical chemical biosensors for the rapid detection of adrenaline. The interactions of polymerized lipid films with adrenaline were also found to provide transient current signals similar to those of freely‐suspended BLMs. The magnitude of the transient current signal was also related to the concentration of the stimulating agent in bulk solution in the micromolar range and these stabilized lipid films can be used again after storage in air. No interferences from ascorbic acid were noticed because of the negatively charged lipids in membranes. The effect of other compounds such as proteins and other compounds closely related to adrenaline was also investigated. Results of recovery experiments using human urine have shown recoveries ranged between 94 to 105%, which shows no interferences from matrix effects due to the presence of urine constituents. The present sensor based on stabilized lipid films can be used for the rapid repetitive detection of this pharmaceutical substance and keep prospects for the selective determination of catecholamines in biofluids.     

Photosensitized damage of bilayer lipid membrane in the presence of haematoporphyrin dimethylether

The variations in electrical conductivity and surface tension of planar bilayer lipid membranes (BLMs) sensitized by a haematoporphyrin dimethylether (HpDME) on visible light irradiation are reported. The irradiation of BLMs immediately leads to a decrease in membrane surface tension. On irradiation the conductivity of BLMs remains constant for a certain period of time (induction time), followed by an increase, terminated by membrane breakage. The induction time is not dependent on stirring of the solution, the addition of azide or ferricyanide to the solution, the addition of antioxidant to the lipid or substitution of air for argon in the cell. The induction time decreases for repeated irradiations or for any new BLM formed in the same cell immediately after the previous membrane has been broken. The conductivity shift consists of reversible and irreversible components. These results suggest that the irradiation of BLMs sensitized by HpDME leads to an accumulation of photoproducts in the membrane which induce pore formation and to a decrease in BLM stability when the concentration of the photoproducts exceeds a critical level.     

梳形接枝共聚物的合成(Ⅱ)——载体化钌卡宾络合物催化降冰片烯基聚苯乙烯的开环岐化聚合

由石油化工副产C₅馏份提取双环戊二烯(DCPD)、以聚合物负载三氟化硼为催化剂进行DCPD与烯丙基氯(AC)的Diels-Alder反应合成5-氯甲基-2-降冰片烯(NBCH₂Cl),经锂代反应后用以引发苯乙烯的活性阴离子聚合合成了降冰片烯(NB)基聚苯乙烯(PS)大分子环烯单体NB-PS,在聚合物负载钌卡宾络合物[RuCl₂(PPh₃)₂(=C=CHtBu)]催化(引发)作用下进行大分子单体NB-PS的开环歧化聚合(ROMP)合成了梳形接枝共聚物PNB-g-PS.实验结果表明所合成聚合物负载硼、钌络合物催化剂的性能均明显优于对应非负载体.讨论了上述催化剂的聚合物载体效应的机理及温度、溶剂等对活性阴离子聚合反应的影响.     

Electrochemical surface plasmon resonance detection of enzymatic reaction in bilayer lipid membranes

In this paper, electrochemical surface plasmon resonance (SPR) method was first used to detect enzymatic reaction in bilayer lipid membrane (BLM) based on immobilizing horseradish peroxidase (HRP) in the BLMs supported by the redox polyaniline (PAn) film. By SPR kinetic curve in situ monitoring the redox transformation of PAn film resulted from the reaction between HRP and PAn, the enzymatic reaction of HRP with H(2)O(2) was successfully analyzed by electrochemical SPR spectroscopy. The results show that this BLM supported on PAn film cannot only preserve the bioactivity of HRP immobilized in the membrane, but also provide a channel for the transfer of electrons between HRP and PAn on electrode surface. These characteristics enabled the development of SPR biosensor for sensitively detecting H(2)O(2). H(2)O(2) has been detected by electrochemical SPR spectroscopy in the concentration range of 5 x 10(-5)M to 2 x 10(-3)M. After each of detections, the SPR sensor surface was completely regenerated by electrochemically reducing the oxidized PAn to its reduced state. This method provides a novel route for enhancing the detection of small ligand of enzymatic reaction in BLM by electrochemical SPR spectroscopy.     

Self-assembled BLMs: biomembrane models and biosensor applications

In the last few years, there have been a number of research papers on self-assemblies of molecules as ‘advanced’ or ‘smart’ materials. The inspiration for this exciting research, without question, comes from the biological world, where, for example, the lipid bilayer of the cell membrane is the most important self-assembling system. Although the first report on self-assembled bilayer lipid membranes (BLMs) in vitro was published in 1962, interface science, including surface and colloid science, has been dealing with these interfacial self-assemblies of amphiphilic molecules since Robert Hooke's time (1672). BLMs have been used in a number of applications, ranging from basic membrane biophysics studies to the conversion of solar energy via water photolysis, and to biosensor development using supported bilayer lipid membranes (s-BLMs and sb-BLMs). This paper briefly summarizes the past research on the use of BLMs as models of biological membranes and describes some details of our current work on supported BLMs as practical biosensors. Additionally, experiments carried out in close collaboration with others on s-BLMs and sb-BLMs are presented.     

Incorporation of Na(+),K(+)-ATP-ase into the thiolipid biomimetic assemblies via the fusion of proteoliposomes

The black lipid membranes (BLMs) are artificial membrane systems that have been widely used in the study of different biological processes. In this paper the planar bilayer lipid membranes have been used to study the behavior of thiolipid molecules-dipalmitoyl-phosphatidyl-ethanolamine-mercaptopropionamide (DPPE-MPA) and cholesteryl 3-mercaptopropionate (Chs-MPA)-as compared to classical BLM made of natural lipids. We present our experiments on black thiolipid bilayer (BTM) formation from a thiolipid solution and basic results of pump currents generated by sodium-potassium pump-Na(+),K(+)-ATP-ase-introduced to such bilayer systems via proteoliposome adsorption with subsequent fusion. Our results imply that no substantial difference exists between BLMs formed from classical lipids and those made from thiolipids used in this study. The same thiolipid molecules were subsequently used for the formation of covalently bound, tethered bilayer lipid membranes (t-BLMs) on polycrystalline gold electrodes. Similarly, as in the case of BLMs, we took advantage of proteoliposome adsorption/fusion to obtain a t-BLM system with reconstituted enzyme. The vesicle fusion on hydrophobic or hydrophilic substrates is one of the main ways to obtain a bilayer system with incorporated biological species. In this paper we present also our preliminary results of electrochemical experiments using rapid solution exchange technique on such t-BLMs systems and their comparison with painted solid supported membranes (SSMs) and BLMs. We have also followed the process of vesicles fusion onto thiolipid monolayer by means of in situ atomic force microscopy in tapping mode (TM-AFM). On the basis of these experiments, we conclude that DPPE-MPA and Chs-MPA molecules used in our experiments preserve lipid properties, allowing for at least partial reconstitution of Na(+),K(+)-ATP-ase into such t-BLMs. On the other hand, the relatively compact organization on polycrystalline gold and the hydrophobic nature of the first monolayer of tethered thiolipids slows down the proteoliposome fusion onto such monolayers and consequently hinders the protein insertion. However, this effect can be overcome by mechanical stimulus that facilitates proteoliposome delamination onto the self-assembled monolayer.     

Graphene-supported hemin as a highly active biomimetic oxidation catalyst

Well supported: stable hemin-graphene conjugates formed by immobilization of monomeric hemin on graphene, showed excellent catalytic activity, more than 10 times better than that of the recently developed hemin-hydrogel system and 100 times better than that of unsupported hemin. The catalysts also showed excellent binding affinities and catalytic efficiencies approaching that of natural enzymes.     

The 40th anniversary of bilayer lipid membrane research

This paper presents a historic perspective on the origin of the lipid bilayer concept and its experimental realization. Additionally, current studies in close collaboration with our colleagues on the use of supported BLMs as biosensors and molecular devices are delineated. Further, recent research of others on BLMs (planar lipid bilayers) is referenced.