埃洛石表面修饰并负载salen钼高效催化烯烃环氧化反应

采用温和的化学表面改性和自组装方法成功制备了埃洛石纳米管负载salen钼(HNTs-SL-Mo)催化剂,运用透射电镜、X射线衍射、红外光谱、诱导偶合等离子体谱和X射线光电子能谱表征了催化剂的形态、大小和分散性等性质。结果证明了salen结构的存在和埃洛石配位钼催化剂的成功制备。制备的催化剂在各种烯烃的环氧化反应中均有很好的活性,且活性高于均相催化剂。对比实验表明,在固定MoO(O2)2(DMF)2时, salen结构发挥了重要作用,不能用N原子作为单一配体来代替。本文还推测了钼和salen配体可能的连接方式和该催化剂催化烯烃环氧化反应的机理。该催化剂在重复使用8次后其活性未见明显下降,表现出优异的重复使用性能。由于埃洛石是一种廉价易得的材料,因此它可为设计效果独特的催化剂提供一个选择。     

埃洛石表面修饰并负载salen钼高效催化烯烃环氧化反应（英文）

采用温和的化学表面改性和自组装方法成功制备了埃洛石纳米管负载salen钼(HNTs-SL-Mo)催化剂,运用透射电镜、X射线衍射、红外光谱、诱导偶合等离子体谱和X射线光电子能谱表征了催化剂的形态、大小和分散性等性质.结果证明了salen结构的存在和埃洛石配位钼催化剂的成功制备.制备的催化剂在各种烯烃的环氧化反应中均有很好的活性,且活性高于均相催化剂.对比实验表明,在固定Mo O(O2)2(DMF)2时,salen结构发挥了重要作用,不能用N原子作为单一配体来代替.本文还推测了钼和salen配体可能的连接方式和该催化剂催化烯烃环氧化反应的机理.该催化剂在重复使用8次后其活性未见明显下降,表现出优异的重复使用性能.由于埃洛石是一种廉价易得的材料,因此它可为设计效果独特的催化剂提供一个选择.     

胺功能化的拟薄水铝石纳米颗粒负载的Mn-V复合物:高效的烯烃环氧化催化剂（英文）

将具有高比表面积和表面高度羟基化的拟薄水铝石纳米颗粒与3-(3甲氧基硅烷)-正丙胺进行共价结合而官能团化,再用于负载硫酸氧钒和六羰基钼络合物。所得样品采用红外光谱、粉末X射线衍射、热重-差热分析、X射线光电子能谱、元素分析、电感耦合等离子体和透射电镜等技术进行了表征,并用于顺-环辛烯的环氧化反应中,优化了诸如溶剂和氧化剂等反应条件.反应过程采用气-液色谱进行监测.重复使用实验表明,该纳米催化剂可重复使用多次,并保持顺-环辛烯接近完全环氧化.所得到的优化反应条件也成功用于其它的取代烯烃的环氧化反应中.     

胺功能化的拟薄水铝石纳米颗粒负载的Mn-V复合物：高效的烯烃环氧化催化剂

将具有高比表面积和表面高度羟基化的拟薄水铝石纳米颗粒与3-(3甲氧基硅烷)-正丙胺进行共价结合而官能团化,再用于负载硫酸氧钒和六羰基钼络合物。所得样品采用红外光谱、粉末X射线衍射、热重-差热分析、X射线光电子能谱、元素分析、电感耦合等离子体和透射电镜等技术进行了表征,并用于顺-环辛烯的环氧化反应中,优化了诸如溶剂和氧化剂等反应条件。反应过程采用气-液色谱进行监测。重复使用实验表明,该纳米催化剂可重复使用多次,并保持顺-环辛烯接近完全环氧化。所得到的优化反应条件也成功用于其它的取代烯烃的环氧化反应中。     

Y型分子筛固载Co(Salprn)配合物的制备及催化烯烃环氧化性能

采用自由配体法将双水杨醛缩丙二胺席夫碱钴配合物Co(Salprn)封装于Y型分子筛超笼中,并通过X射线衍射、漫反射UV-Vis光谱、FT-IR光谱和差热分析技术对所制备的催化剂进行了表征。该催化剂样品( [Co(Salprn)]-Y)在苯乙烯环氧化反应中较纯配合物Co(Salprn)表现出很高的催化活性。反应条件（包括溶剂、催化剂用量、异丁醛浓度和反应时间）对催化性能有较大影响。研究结果还表明,[Co(Salprn)]-Y对其他烯烃的环氧化也具有较高催化活性。其活性顺序为苯乙烯﹥环己烯﹥环辛烯﹥正辛烯。     

纳米SnO2高效催化烯烃与H2O2环氧化反应研究

构建了用于催化烯烃与过氧化氢环氧化反应的高效、 绿色催化反应体系. 首先, 通过水热合成法制备了纳米SnO₂, 并在320 ℃下煅烧. 随后, 对所有催化剂进行X射线衍射(XRD)、 紫外-可见漫反射光谱(UV-Vis)、 傅里叶变换红外光谱(FTIR)、 扫描电子显微镜(SEM)和透射电子显微镜(TEM)表征. 进一步将催化剂用于以H₂O₂水溶液为氧化剂环氧化各种官能化烯烃(包括环烯烃, 苯乙烯和直链烯烃)的反应, 以高转化率和高选择性得到了环氧化物. 在相似的反应条件下, 发现合成的纳米SnO₂-170催化剂在催化1-甲基环己烯与H₂O₂的环氧化反应中的活性最佳, 在2 h内1-甲基环己烯的转化率达到100%, 环氧化物选择性达到100%.     

手性低聚环状salen-Mn(Ⅲ)配合物的合成及其催化烯烃不对称环氧化反应的性能

 合成了新型二水杨醛衍生物,将其与(1R,2R)-环己二胺缩合制备出手性低聚环状salen配体,该配体再与Mn3+配位制得手性低聚环状salen-Mn(Ⅲ)配合物. 利用核磁共振光谱、傅里叶变换红外光谱、紫外可见光谱、凝胶渗透色谱和元素分析等手段对配体和配合物进行了表征. 分别以NaClO和间氯过氧苯甲酸(m-CPBA)为氧化剂,考察了该salen-Mn(Ⅲ)配合物催化烯烃不对称环氧化反应的性能. 结果表明,该配合物对顺-β-甲基苯乙烯的不对称环氧化反应具有很好的催化性能,产物选择性达96%, ee值达78%. 以顺-β-甲基苯乙烯为底物,m-CPBA为氧化剂,考察了该配合物催化剂的循环使用性能.     

通过接枝苄基磺酸在MCM-41上固载手性Mn(salen)配合物

首先通过两步后合成处理,在MCM-41上接枝苄基磺酸;然后,以苄基磺酸为过渡产物,用手性Mn(salen)配合物修饰处理,得到了苄基磺酸轴向负载手性Mn(salen)配合物的MCM-41;实现了在廉价且温和条件下均相手性Mn(salen)催化剂的非均相化。采用X射线衍射(XRD)、低温N₂吸附-脱附、红外光谱、热重-差示扫描量热(TG-DSC)分析、电感耦合等离子体发射光谱(ICP)和酸度滴定等对样品进行了表征。结果表明,手性Mn(salen)配合物成功固载在MCM-41上,且MCM-41的介孔结构和Mn(salen)配合物的手性特征仍然保留。以间氯过氧苯甲酸为氧化剂,考察了所得固载型催化剂对α-甲基苯乙烯的不对称环氧化催化性能,结果表明在0 ℃反应2 h,催化剂用量为0.02 mmol,无需加入轴向配体N-甲基吗啉氮氧化物(NMO)的条件下对映体过量(enantiomeric excess,e.e.)值可达99%以上,转化率为77%。归因于苄基磺酸基起到了很好的轴向配体作用。经适当处理,固载型催化剂在循环使用5次后e.e.值依然有71%,表现出较好的活性和重复使用性能。     

通过接枝苄基磺酸在MCM-41上固载手性Mn(salen)配合物

首先通过两步后合成处理,在MCM-41上接枝苄基磺酸;然后,以苄基磺酸为过渡产物,用手性Mn(salen)配合物修饰处理,得到了苄基磺酸轴向负载手性Mn(salen)配合物的MCM-41;实现了在廉价且温和条件下均相手性Mn(salen)催化剂的非均相化。采用X射线衍射(XRD)、低温N2吸附-脱附、红外光谱、热重-差示扫描量热(TG-DSC)分析、电感耦合等离子体发射光谱(ICP)和酸度滴定等对样品进行了表征。结果表明,手性Mn(salen)配合物成功固载在MCM-41上,且MCM-41的介孔结构和Mn(salen)配合物的手性特征仍然保留。以间氯过氧苯甲酸为氧化剂,考察了所得固载型催化剂对α-甲基苯乙烯的不对称环氧化催化性能,结果表明在0℃反应2 h,催化剂用量为0.02 mmol,无需加入轴向配体N-甲基吗啉氮氧化物(NMO)的条件下对映体过量(enantiomeric excess,e.e.)值可达99%以上,转化率为77%。归因于苄基磺酸基起到了很好的轴向配体作用。经适当处理,固载型催化剂在循环使用5次后e.e.值依然有71%,表现出较好的活性和重复使用性能。     

离子液体中Mn(salen)催化环己烯环氧化反应

 研究了离子液体中Mn(salen)络合物催化环己烯的环氧化反应,考察了反应介质、 Mn(salen)络合物催化剂结构和反应条件等对环氧化反应的影响. 在离子液体-CH2Cl2混合溶剂中,以相对廉价的H2O2为氧化剂,得到了高的环己烯转化率和环氧环己烷选择性. 当以邻苯二胺和水杨醛制备的Mn(salen)络合物为催化剂,反应温度为273 K时,在［bmim］BF4-CH2Cl2的混合溶剂中,环己烯的转化率和环氧环己烷选择性分别可达100%和94.0%. 此外,反应结束后,产物可以由正己烷萃取出来,解决了传统均相催化体系中催化剂与产物不易分离的问题.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.