Synthesis of thiadiazoles and 1,2,4-triazoles derived from cyclopropane dicarboxylic acid

New heterocyclic derivatives of cyclopropane dicarboxylic acid comprising thiadiazole and 1,2,4-triazole moieties are reported. Reaction of 1,1-cyclopropane dicarboxylic acid (1) with thiosemicarbazide and phosphorous oxychloride resulted in 1,1-bis (2-amino-1,3,4-thiadiazol-5- yl)cyclopropane (2). Cyclopropane dicarboxylic acid thiosemicarbazide (6) was converted into 1,1-bis(3-thio-4H-1,2,4-triazol-5-yl) cyclo- propane (7) by ring closure in an alkaline medium. The thiadiazole 2 and the triazole 7 were converted into a variety of derivatives.     

吡啶二甲酸类配体-EDTA-铽三元配合物的荧光性能

对几种吡啶－２,６－二甲酸类配体与ＥＤＴＡ、铽的三元配合物在溶液中的荧光性能进行了研究,溶液ＰＨ值和溶剂效应对体系荧光的影响也分别进行了探讨。４－甲氧基吡啶－２,６－二甲酸和４－乙氧基吡啶－２,６－二甲酸等配体在这种三元体系中的敏化性能比常用的吡啶－２,６－二甲酸好,其中４－乙酰氨基吡啶－２,６－二甲酸特别优异。不论在二元配合物系还是在三元配合物体系中,均具有发光强度大、寿命长的特点。     

Enthalpies of mixing and apparent molar volumes of ethanol solution of chiral dicarboxylic acids

Enthalpies of mixing of R- and S-enantiomers of dicarboxylic acids such as 2-methylbutanedioic acid (MBA), 2-hydroxylbutanedioic acid (HBA), 2-methylpentanedioic acid (MPA) and 2-hydroxyl-2-methylbutanedioic acid (HMBA) in ethanol solution have been measured for a large range of mole fraction of heterochiral dicarboxylic acid at 298.15 K. Also densities of ethanol solution of the dicarboxylic acids were determined. Enthalpies of mixing were exothermic for all the concentrations. Enthalpic stabilization on mixing was increased with decreasing concentration of all dicarboxylic acids measured. Sequence of enthalpic stabilization on mixing was MBA mixing was MBA<DHBA<MPA<HMBA<HBS at 0.5 mass%.     

Direct polyesterification with thionyl chloride in pyridine improved by a modification of monomer sequences in copolymers

The direct polyesterification with thionyl chloride (SOCl₂) in pyridine was further investigated. Copolycondensations of dicarboxylic acids, bisphenols, and hydroxybenzoic acids were significantly affected by the reaction temperatures and combinations of monomers which could change relative rates of alcoholyses of the activated dicarboxylic acids and the hydroxyacids consequently to vary monomer sequences in the copolymers resulted. The sequences were tried to be varied more directly by stepwise reactions of monomers in copolycondensations of dicarboxylic acids, bisphenols, and p-hydroxybenzoic acid (PHB), as well as PHB and m-hydroxybenzoic acid (MHB). The reactions proceeded smoothly and satisfactorily when carried out by initial reaction of dicarboxylic acids and PHB followed by bisphenols likely to favor sequential to random distributions of monomers. Reverse addition of PHB and bisphenols, and then dicarboxylic acids resulted in rapid precipitation due to some oligomerization of PHB at an earlier stage of reaction, and largely retarded the reaction. This was also the case for the copolycondensation of PHB and MHB. Copolymers of high inherent viscosities with up to 65 mol% PHB could be obtained by initial reaction of MHB followed by PHB.     

The molecular mechanism of dicarboxylic acid transport in Escherichia coli K 12.

It is the purpose of this communication to review the properties of the dicarboxylic acid transport system in Escherichia coli K 12, in particular the role of various dicarboxylate transport proteins, and the disposition of these components in the cytoplasmic membrane. The dicarboxylate transport system is an active process and is responsible for the uptake of succinate, fumarate, and malate. Membrane vesicles prepared from the EDTA, lysozyme, and osmotic shock treatment take up the dicarboxylic acids in the presence of an electron donor. Genetic analysis of various transport mutants indicates that there is only one dicarboxylic acid transport system present in Escherichia coli K 12, and that at least 3 genes, designated cbt, dct A, and dct B, are involved in this transport system. The products corresponding to the 3 genes are: a periplasmic binding protein (PBP) specified by cbt, and 2 membrane integral proteins, SBP 1 and SBP 2, specified by dct B and dct A, respectively. Components SBP 1 and SBP 2 appear to be exposed on both the inner and outer surfaces of the membrane, and lie in close proximity to each other. The substrate recognition sites of SBP 2 and SBP 1 are exposed on the outer and inner surfaces of the membrane respectively. The data presently available suggest that dicarboxylic acids may be translocated across the membrane via a transport channel. A tentative working model on the mechanism of translocation of dicarboxylic acids across the cell envelope by the periplasmic binding protein, and the 2 membrane carrier proteins is presented.     

Light-Driven Enzymatic Decarboxylation of Dicarboxylic Acids

Photodecarboxylase from Chlorella variabillis (CvFAP) is one of the three known light-activated enzymes that catalyzes the decarboxylation of fatty acids into the corresponding C1-shortened alkanes. Although the substrate scope of CvFAP has been altered by protein engineering and decoy molecules, it is still limited to mono-fatty acids. Our studies demonstrate for the first time that long chain dicarboxylic acids can be converted by CvFAP. Notably, the conversion of dicarboxylic acids to alkanes still represents a chemically very challenging reaction. Herein, the light-driven enzymatic decarboxylation of dicarboxylic acids to the corresponding (C2-shortened) alkanes using CvFAP is described. A series of dicarboxylic acids is decarboxylated into alkanes in good yields by means of this approach, even for the preparative scales. Reaction pathway studies show that mono-fatty acids are formed as the intermediate products before the final release of C2-shortened alkanes. In addition, the thermostability, storage stability, and recyclability of CvFAP for decarboxylation of dicarboxylic acids are well evaluated. These results represent an advancement over the current state-of-the-art.     

Direct polyesterification with thionyl chloride in pyridine improved by a modification of monomer sequences in copolymers

The direct polyesterification with thionyl chloride (SOCl₂) in pyridine was further investigated. Copolycondensations of dicarboxylic acids, bisphenols, and hydroxybenzoic acids were significantly affected by the reaction temperatures and combinations of monomers which could change relative rates of alcoholyses of the activated dicarboxylic acids and the hydroxyacids consequently to vary monomer sequences in the copolymers resulted. The sequences were tried to be varied more directly by stepwise reactions of monomers in copolycondensations of dicarboxylic acids, bisphenols, and p-hydroxybenzoic acid (PHB), as well as PHB and m-hydroxybenzoic acid (MHB). The reactions proceeded smoothly and satisfactorily when carried out by initial reaction of dicarboxylic acids and PHB followed by bisphenols likely to favor sequential to random distributions of monomers. Reverse addition of PHB and bisphenols, and then dicarboxylic acids resulted in rapid precipitation due to some oligomerization of PHB at an earlier stage of reaction, and largely retarded the reaction. This was also the case for the copolycondensation of PHB and MHB. Copolymers of high inherent viscosities with up to 65 mol % PHB could be obtained by initial reaction of MHB followed by PHB.     

碳铂类似物的合成,表征及对大鼠W—256肉瘤的抑制作用

合成了十八种〔PtA_2X〕·yH_2O,其中A分别为NH_3、CH_3NH_2、1/2乙二胺和1/2(2,3-二甲基-2,3-丁二胺),X分别为1,1-环丙烷二羧酸根(CPrDCA)、2-甲-1,1-环丙烷二羧酸根(2-M-CPrDCA)、2-甲-1,1-环丁烷二羧酸根(2-M-CBDCA)、1,2-环戊烷二羧酸根(CPDCA)和1,1-环已烷二羧酸根(CHDCA),并进行了表征。测定了配合物抑制大鼠W-256肉瘤的活性,发现配合物〔Pt(NH_3)_2X〕系列按X不同有以下的活性次序:CPrDCA>2-M-CPrDCA>CPDCA>CBDCA(碳铂)≥2-M-CBDCA。     

Interaction of pyridine‐ and 4‐hydroxypyridine‐2,6‐dicarboxylic acids with heavy metal ions in aqueous solutions

Interactions between pyridine‐2,6‐dicarboxylic acid and 4‐hydroxypyridine‐2,6‐dicarboxylic acid with Cu(II), Pb(II), and Cd(II) ions were characterized in aqueous solutions (20°C; I = 0.4 (KNO₃)) by means of dc‐polarography. In solutions with excess of ligand, Cu(II), Pb(II), and Cd(II) form 1:2 complexes with the tridentate dianion of pyridine‐2,6‐dicarboxylic acid (dipic²⁻) from weak acid to alkaline solutions. The values of log β₂ for Cu(II), Pb(II), and Cd(II) are 16.1, 11.8, and 11.0, respectively. The complexing ability of pyridine‐2,6‐dicarboxylic acid is higher in acid solutions and lower in alkaline solutions than that of 4‐hydroxypyridine‐2,6‐dicarboxylic acid. This difference is attributed to the OH‐group, which can deprotonate in basic pH. In acid solutions the OH‐group acts as an electron acceptor and reduces the electron donation available to the nitrogen atom in 4‐hydroxypyridine‐2,6‐dicarboxylic acid, whereas in alkaline solutions the OH‐group is deprotonated, and the deprotonated O₋ group acts as an electron donor and increases the coordination ability of the ligand. The triple‐deprotonated anion of 4‐hydroxypyridine‐2,6‐dicarboxylic acid (chel^3‐) forms a stable diligand complex with Cu(II), the stability constant logarithm being 21.5 ± 0.2.© 2003 Wiley Periodicals, Inc. Heteroatom Chem 14:625–632, 2003; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/hc.10203     

Chiral selectors based on C2-symmetric dicarboxylic acids

Bis-allylamides of rigid C₂-symmetric dicarboxylic acids, useful as precursors in the synthesis of liquid chromatographic chiral stationary phases via hydrosilylation reactions, have been prepared by two different approaches. One involved resolution of the dicarboxylic acid followed by reaction with allylamine via the acid chloride or by a carbodiimide-assisted condensation. The other route involved acetalization of N,N′-diallyl-l-tartardiamide (DATD) with aromatic aldehydes. Moreover, transformation of the enantiopure dicarboxylic acid used in the first route into the corresponding diamine permitted the synthesis of selectors possessing a reversed amide functionality. The enantiomer-discriminating properties of some of these selectors were studied by NMR.     

Synthesis and properties of novel aromatic polyamides derived from 1,5-bis(4-aminophenoxy)naphthalene and aromatic dicarboxylic acids

A new bis(phenoxy)naphthalene-containing diamine, 1,5-bis(4-aminophenoxy)naphthalene, was synthesized in two steps from the condensation of 1,5-dihydroxy-naphthalene with p-chloronitrobenzene in the presence of potassium carbonate, giving 1,5-bis(4-nitrophenoxy)naphthalene, followed by hydrazine hydrate/Pd? C reduction. A series of polyamides and copolyamides were synthesized by the direct polycondensation of the diamine with various aromatic dicarboxylic acids or with mixed dicarboxylic acids in N-methyl-2-pyrrolidone (NMP) using triphenyl phosphite and pyridine as condensing agents. The polymers having inherent viscosity of 0.81–1.25 dL/g were obtained in quantitative yield. Most of the polymers were generally soluble in aprotic solvent such as N,N-dimethylacetamide, N-methyl-2-pyrrolidone, etc. The polymers derived from rigid dicarboxylic acids such as terephthalic acid, naphthalene dicarboxylic acid, and 4,4′-biphenyldicarboxylic acid exhibited crystalline patterns. Glass transition temperatures of polymers were in the range of 230–360°C, and 10% weight loss temperatures in nitrogen and air were above 492 and 470°C, respectively. © 1993 John Wiley & Sons, Inc.     

Retention indices of symmetric dicarboxylic acid esters

Retention indices of 28 symmetric dicarboxylic acid esters containing from two to six carbon atoms in the acid residue were determined experimentally. The temperature dependences of the retention indices were linear. Equations were proposed to predict the retention indices for symmetric and mixed C2–C6 dicarboxylic acid esters.     

Insights into coal structure from degradation with ruthenium tetroxide and tandem mass spectrometry

The products of ruthenium tetroxid oxidation of coal (Illinois No. 2) at ambient temperature were examined by tandem mass spectrometry using positive and negative chemical ionization. The negative-ion mass spectrum of the coal sample displays seven homologous series of ions. Individual compounds were characterized by recording daughter spectra. In this way, the following types of compounds were identified: aliphatic dicarboxylic acids, aromatic dicarboxylic and tricarboxylic acids, anhydrides of the di- and tri-carboxylic acids, and dianhydrides corresponding to the tetracarboxylic aromatic acids. The positive-ion mass and daughter spectra provided additional confirmation. Two series of ions dominate the positive-ion mass spectrum, those from the aliphatic dicarboxylic acids, and the corresponding anhydrides. The fragmentation behavior of model compounds was examined to confirm these assignments. The carboxylic acids and anhydrides identified suggest the presence of particular structural features in the coal prior to oxidation. These include C₂–C₆ aliphatic bridges between aromatic units, fused ring aromatic structures, tetralin and indan structures.     

Hydrolytic ring opening reactions of anhydrides for first row transition metal dicarboxylate complexes

Ring opening reactions of 2,3-pyridine dicarboxylic anhydride are studied with hydrated salts of cobalt, nickel and zinc. The hydrated metal salts preferentially hydrolyze 2,3-pyridine dicarboxylic anhydride rather than causing esterification in methanol medium. Hydrolytic opening of 2,3-pyridine dicarboxylic anhydride by hydrated cobalt(II) acetate and nickel(II) acetate resulted in the corresponding chelate complexes of monodeprotonated 2,3-pyridine dicarboxylic acid. The reaction of copper acetate with pyromellitic dianhydride in the presence of 1,10-phenanthroline gives a dinuclear copper complex whereas a similar reaction with copper(II) chloride gives a mononuclear copper complex.     

Synthesis and reactions of organometallic carbodiimides and isocyanates

Conclusions A convenient laboratory method has been proposed for the preparation of organometallic tin and germanium carbodiimides in excellent yields and satisfactory purities.Organotin carbodiimides react with dicarboxylic acid anhydrides to give addition products, namely, organotin derivatives of N-substituted dicarboxylic acid monocyanamides. The corresponding reaction of tin and germanium isocyanates lead to the formation of N-tributylstannyl(germyl)imides of dicarboxylic acids, and CO₂.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 4, pp. 859–865, April, 1988.     

ω-(2-benzimidazolyl)perfluorinated carboxylic acids and their derivatives

A convenient method is proposed for the preparation of -(2-benzimidazolyl) perfluorinated carboxylic acids and their amides by condensation of o-phenylenediamine with imides of perfluorinated dicarboxylic acids. The transformations of the o-aminoanilides of the amides of the perfluorinated dicarboxylic acids were studied by thermal analysis and mass spectroscopy.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 9, pp. 1262–1265, September, 1976.     

Synthesis of Coronene Using Microwave Irradiation

Using microwave irradiation, perylene was obtained from 3,4,9,10-perylenetetracarboxylic dianhydride with copper powder in boiling quinoline. With the same method, 1,12-benzoperylene was synthesized from 1, 12-benzoperylene-l‘, 2‘-dicarboxylic anhydride, and coronene was prepared from coronene-1, 2- dicarboxylic anhydride with good yield. Through Dields-Alder reaction, 1, 12-benzoperylene-l‘, 2‘-dicarboxylic anhydride and coronene-l,2-dicarboxylic anhydride were also prepared using microwave irradiation.     

STM study on quinacridone derivative assemblies: modulation of the two-dimensional structure by coadsorption with dicarboxylic acids

We describe the two-dimensional (2D) assemblies of N,N'-dialkyl-substituted quinacridone derivatives on highly orientated pyrolytic graphite observed by scanning tunneling microscopy, and focus our discussion on whether the supramolecular organization can be modulated by the coadsorption of dicarboxylic acids. Our experiments have demonstrated that the quinacridone derivatives can form different 2D nanostructures when coadsorbed with dicarboxylic acids of different length at the liquid/graphite interface. Interestingly, N,N'-dihexadecyl-substituted quinacridone derivative alternately takes two different conformations in two columns for its coadsorption with pentadecanedioic acid and form a gridlike structure. It is shown that a cooperative effect of different interactions can be modulated by introducing guest molecule, leading to formation of different self-assembled nanostructures.     

Intramolecular photocycloaddition of β-stilbazoles tethered by silyl chains

Intramolecular (2+2) photocycloaddition of β-stilbazoles tethered by silyl chains took place with high efficiency. Complexation with dicarboxylic acid or catechol further enhanced both the efficiency and stereoselectivity.     

Synthesis and properties of organosoluble poly(amide imide imide)s based on tetraimide dicarboxylic acid condensed from 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride, 4,4′‐oxydianiline,and trimellitic anhydride and various aromatic diamines

A novel tetraimide dicarboxylic acid was synthesized with the ring‐opening addition of 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride, 4,4′‐oxydianiline, and trimellitic anhydride in a 1/2/2 molar ratio in N‐methyl‐2‐pyrrolidone followed by azeotropic condensation to tetraimide dicarboxylic acid. A series of poly(amide imide imide)s (PAIIs) with inherent viscosities of 0.8–1.1 dL/g were prepared from tetraimide dicarboxylic acid with various aromatic diamines by direct polycondensation. Most of the PAIIs were readily soluble in a variety of amide polar solvents and even in less polar m‐cresol and pyridine. Solvent‐cast films had tensile strengths ranging from 99 to 106 MPa, elongations at break ranging from 8 to 13%, and initial moduli ranging from 2.0 to 2.3 GPa. The glass‐transition temperatures of these PAIIs were recorded at 244–276 °C. They had 10% weight losses at temperatures above 520 °C in air or nitrogen atmospheres. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1092–1102, 2002