Polyethersulfone sulfonated by chlorosulfonic acid and its membrane characteristics

Sulfonated polyethersulfone (SPES) was prepared by homogeneous method with chlorosulfonic acid as sulfonating agent and concentrated sulfuric acid as solvent. The presence of sulfonic acid groups in SPES was confirmed by ¹H NMR and FTIR. Thermogravimetric analysis (TGA) studies were carried out to investigate the thermal stability of SPES. Membranes were cast from SPES solutions in N-methyl-2-pyrrolidone. Tensile strength of prepared membranes decreased with degree of sulfonation (DS) but water uptakes of SPES membranes increased with DS. Compared with unsulfonated polyethersulfone membrane, the hydrophilicity of SPES membranes was increased, as shown by a reduced contact angle with water. Amorphous structures for SPES membranes were detected by X-ray diffraction. Atomic force microscopy phase images of the membranes clearly showed the hydrophilic domains at higher DS.     

Fabrication and Properties of Graphene Oxide/Sulfonated Polyethersulfone Layer-by-layer Assembled Polyester Fiber Composite Proton Exchange Membranes

Using the hydrogen-bonding interaction between graphene oxide(GO) and sulfonated polyethersulfone (SPES), we constructed the multilayer structure of GO and SPES on the polyester fiber mats via layer-by-layer self-assembly. In each self-assembled layer, sulfonic acid groups are arranged along the axis of fiber, which provides the long-range proton transmission channels, promoting the rapidly proton conduction. The performances of the composite membranes based on SPES and multilayer assembled polyester fiber mats were studied. The results show that the proton conductivity of composite membranes increases with the increasing assembly layers. At the same time, the mechanical properties and methanol-resistance of the composite membranes were obviously improved.     

Protein-adsorption-resistance and permeation property of polyethersulfone and soybean phosphatidylcholine blend ultrafiltration membranes

Novel ultrafiltration membranes were prepared by simple blending of polyethersulfone (PES) and soybean phosphatidylcholine (SPC). X-ray photoelectron spectroscopy (XPS) and water contact angle measurements indicated SPC enrichment at the membrane surfaces. The immobilization and arrangement of PC groups at surfaces rendered the membranes more hydrophilic. BSA adsorption amount decreased from 56.2 μg/cm² for SPC-free PES membrane to 2.4 μg/cm² for PES/SPC blend membrane. The fouling-resistant property of the blend membranes was improved considerably with an increase of SPC content while the pure water permeation flux decreased remarkably. Using PEG/PVP mixture instead of PEG as pore-forming agent increased pure water flux of PES/SPC blend membrane to some extent.     

Hydrophilic modification of polyethersulfone membranes by low temperature plasma-induced graft polymerization

A complete and permanent hydrophilic modification of polyethersulfone (PES) membranes is achieved by argon plasma treatment followed by polyacrylic acid (PAA) grafting in vapor phase. Both Ar plasma treatment alone and post-PAA grafting rendered a complete hydrophilicity to the PES membranes. The hydrophilicity of the membranes treated with only the Ar plasmas is not, however, permanent. In contrast, the PES membranes treated with Ar plasma and subsequent acrylic acid (AA) grafting are permanently hydrophilic. High energy resolution X-ray photoelectron spectroscopy (XPS) confirmed the grafting of PAA to all surfaces of the membrane. Furthermore, water bubble point measurements remain unaffected. The pore sizes of the grafted membranes at higher grafting yield are slightly decreased. The modified membranes are less susceptible to protein fouling than the unmodified membranes and the pure water flux for the modified membranes was tremendously increased by plasma treatment. Furthermore, the modified membranes are easier to clean and required little caustic to recover permeation flux.     

Surface modification of polyethersulfone membranes by blending triblock copolymers of methoxyl poly(ethylene glycol)-polyurethane-methoxyl poly(ethylene glycol)

The surface of polyethersulfone (PES) membrane was modified by blending triblock copolymers of methoxyl poly(ethylene glycol)-polyurethane-methoxyl poly(ethylene glycol) (mPEG-PU-mPEG), which were synthesized through solution polymerization with mPEG Mns of 500 and 2000, respectively. The PES and PES/mPEG-PU-mPEG blended membranes were prepared through spin coating coupled with liquid-liquid phase separation. FTIR and (1)H NMR analysis confirmed that the triblock copolymers were successfully synthesized. The functional groups and morphologies of the membranes were studied by ATR-FTIR and SEM, respectively. It was found that the triblock copolymers were blended into PES membranes successfully, and the morphologies of the blended membranes were somewhat different from PES membrane. The water contact angles and platelet adhesion were decreased after blending mPEG-PU-mPEG into PES membranes. Meanwhile, the activated partial thromboplastin time (APTT) for the blended membranes increased. The anti-protein-fouling property and permeation property of the blended membranes improved obviously. SEM observation and 3-(4, 5-Dimethylthiazol-2-yl)-2, 5-diphenyl tetrazolium bromide (MTT) assay proved the surfaces of the blended membranes promoted human hepatocytes adhesion and proliferation better than PES membrane.     

ULTRAFILTRATION MEMBRANE FORMATION OF PES-C, PES AND PPESK POLYMERS WITH DIFFERENT SOLVENTS

Ultrafiltration membranes were prepared using phenolphthalein polyarylethersulfone (PES-C),polyethersulfone (PES) and poly(phthalazinone ether sulfone ketone) (PPESK) as polymers and NMP,DMAc,DMF and DMSO as solvents by immersion precipitation via phase inversion.Experimental data of thermodynamic properties of the polymer solutions and kinetic process of membrane formation were reported.For polymer solutions with good solvents,the sequence of the viscous flow activation energy (E_η) was coincident with ...     

磺化酚酞型聚醚砜膜的制备及其阻醇和质子导电性能

直接甲醇燃料电池 (Directmethanolfuelcell,DMFC)以高效、清洁和燃料储运方便等优点适宜于作为各种用途的可移动动力源 ,成为 2 0世纪 90年代以来研究与开发的热点[1,2 ] .目前 ,这种电池的研究难点主要集中在催化剂不稳定和质子交换膜透醇上 .一张好的DMFC膜不但要可传递质子、绝缘电子 ,还应具有良好的阻醇性能 .如果膜的阻醇性能不好 ,甲醇会穿过膜到达阴极 ,与氧直接反应而不产生电流 ,不但造成燃料的浪费 ,同时也影响阴极的正常反应 ,使电池效率下降[3 ] .目前广泛应用于燃料电池中的Nafion 系列膜是由美国DuPont公司生产的一种…     

Preparation and characterization of asymmetric polyethersulfone (PES) membranes

Flat‐sheet asymmetric polyethersulfone (PES) membranes were prepared from polyethersulfone (PES)/ polyethylene glycol (PEG)/ N‐methyl‐2‐pyrrolidone (NMP) system via phase inversion induced by immersion precipitation in water coagulation bath. Effects of propionic acid (PA) as a non‐solvent additive (NSA) on morphology and performance of the membranes prepared from PES/PEG 6000/NMP system in water coagulation bath were investigated. The cross section morphology of the membranes was studied by scanning electron microscopy (SEM). In addition, performance of the membranes was studied by water content measurements and separation experiments using pure water and human serum albumin (HSA) protein solution as feeds. According to SEM analysis, it was found out that the NSA has a significant influence on the structure of the skin layer and the sublayer. The obtained results indicated that addition of PA to the casting solution decreases permeation flux of the prepared membranes. Copyright © 2009 John Wiley & Sons, Ltd.     

pH stimuli-responsive and fouling resistance PES membrane fabricated by using photochromic spiropyran and spironaphthoxazine nanofillers for pesticide removal

New fouling resistance and stimulus–responsive nanofiltration membranes were fabricated by adding photochromic spiropyran (SPO) and spironaphthoxazine (SNO) nanofillers to the polyethersulfone (PES) matrix via the phase inversion method. The effect of SPO and SNO, as novel photoresponsive molecule nanofillers, were evaluated in terms of membrane morphology, porosity, wettability, pure water flux (PWF), antifouling resistance, and stimulus–responsive properties. All the modified membranes indicated better performance compared to the bare PES. The membrane PWF was notably enhanced from 7.7 kg/m²h for the bare PES up to 18.68 and 20.58 kg/m²h for the 0.1 wt.% SPO and SNO blended membranes, respectively. Also, the 0.1 wt.% of SNO-based PES membrane indicated the best flux recovery ratio compared to the other membranes. The photo stimulus–responsive assessment showed a color change for both SPO and SNO photochromic in membranes. In the case of variable effect investigation, the response surface methodology at three levels (pressure: 4, 5, 6 bar and flow rate: 50, 100, and 150 L/h) was applied. A suitable flux (23.39 kg/m² h) and high removal efficiency (more than 90%) was achieved at optimum conditions. Also, the modified membranes by photochromic materials were sensitive to environmental variables such as acidic and alkaline conditions by changing their color.     

Improved protein-adsorption-resistant property of PES/SPC blend membrane by adjustment of coagulation bath composition

To improve surface protein-adsorption-resistant property of polyethersulfone (PES) membranes, soybean phosphatidylcholine (SPC) was added to PES casting solution. The blend membranes were prepared by a phase inversion method in a wet process. The surface of PES/SPC blend membranes was characterized by X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). XPS data revealed that the phosphorylcholine (PC) groups were concentrated at the surface by changing the composition of coagulation bath. Addition of N,N-dimethylformamide (DMF) in coagulation bath could prolong coagulation time and facilitate the migration of SPC from polymer bulk to membrane surface. The PES/SPC blend membranes dramatically reduced BSA and fibrinogen adsorption compared to PES control membrane due to effective immobilization of PC groups at the surface of PES/SPC blend membranes.     

Preparation and performance evaluation of carboxylic acid containing polyamide incorporated microporous ultrafiltration PES membranes

Improved ultrafiltration membranes were prepared by the phase inversion technique via immersion precipitation of synthesized carboxylic acid containing polyamide (CPA) and polyethersulfone (PES) in dimethylacetamide. The CPA was synthesized and characterized by Fourier transform infrared (FTIR), nuclear magnetic resonance, thermogravimetric analysis, and differential scanning calorimetry analyses. Next, the influence of CPA adding and its different concentrations on the performances and membrane structure were investigated. The obtained membranes were characterized by means of FTIR in the attenuated total reflection mode, scanning electron microscopy, and contact angle. The membrane performance studies revealed that the presence of CPA in the membrane structure increased water permeability while reducing protein fouling. It turned out that the PES/CPA membranes had better porosity, more hydrophilic surface, and more vertically finger‐like pores in comparison with the bare PES membrane. When the CPA concentration in the blending solution reached 1 wt%, the water permeability increased from 7.3 to 153.6 L/m² h¹. The attenuated total reflection‐FTIR analysis confirmed that CPA was captured in the membrane matrix.     

Polyethersulfone/polyacrylonitrile blend ultrafiltration membranes with different molecular weight of polyethylene glycol: preparation,morphology and antifouling properties

Asymmetric ultrafiltration (UF) membranes were prepared from blends of polyethersulfone (PES)/polyacrylonitrile (PAN) via phase inversion method induced by immersion precipitation. Polyethylene glycol (PEG) with four different molecular weights was used as pore former and hydrophilic polymeric additive. N,N‐dimethylformamide (DMF) and water were used as solvent and coagulant (nonsolvent), respectively. The effects of different proportion of PES/PAN and molecular weight of PEG on morphology and performance of the prepared membranes were investigated. Performance of the membranes was evaluated using UF experiments of pure water and buffered bovine serum albumin (BSA) solution as feed. The contact angle measurements indicated that the hydrophilicities of PES/PAN membrane increase by increasing the PAN concentration in the casting solution. However, performance of the membranes improves by increasing the PAN concentration in the casting solution up to 20% and then decreases with further addition of PAN. It was found out that the rejection of BSA decreases with increasing the PAN concentration in the casting solution. Furthermore, it was found that the performance of the membranes increases by increasing the molecular weight of PEG up to 1500 Da and then decreases with the higher molecular weights. The morphology of the prepared membranes was studied by scanning electron microscopy. Copyright © 2011 John Wiley & Sons, Ltd.     

Amphiphilic graft copolymers based on ultrahigh molecular weight poly(styrene-alt-maleic anhydride) with poly(ethylene glycol) side chains for surface modification of polyethersulfone membranes

Amphiphilic graft copolymers having ultrahigh molecular weight poly(styrene-alt-maleic anhydride) (SMA) backbones and methoxyl poly(ethylene glycol) (MPEG) grafts were synthesized via the esterification between anhydride groups with hydroxyl groups. The synthesized graft copolymers, SMA-g-MPEGs, were used as additives in the preparation of polyethersulfone (PES) membranes via phase inversion process. X-ray photoelectron spectroscopy (XPS) analysis showed the comb-like graft copolymers spontaneously segregated to membrane surface during membrane formation. Water contact angle measurements and water absorbance experiments indicated the PES/SMA-g-MPEG blend membranes were much more hydrophilic than pure PES membrane. The blend membranes had stronger protein adsorption resistance than pure PES membrane did. After washed using de-ionized water for 25 days, the blend membranes exhibited higher hydrophilicity and stronger protein adsorption resistance. This phenomenon was attributed to the further accumulation of SMA-g-MPEG additives on membrane surface in aqueous conditions. SMA-g-MPEGs can be well preserved in membrane near-surface and not lost during membrane washing due to their high molecular weight and comb-like architecture.     

New ion exchange membrane derived from sulfochlorated polyether sulfone for electrodialysis desalination of brackish water

The purpose of this work is to study the desalination of brackish water using a new ion exchange membrane, made from sulfochlorated polyethersulfone (Cl‐PES), and crosslinked using aminated polyethersulfone (NH2‐PES) as a crosslinking reagent. This membrane, named ClNH2 membrane, has been obtained by reaction between Cl‐PES with 1.3 SO₂Cl groups per monomer unit and 0.2 equivalent amount of NH2‐PES. ClNH2 membrane has been characterized in terms of contact angle, transport number, intrinsic conductivity, and water uptake (as a function of temperature). Electrodialysis performances of the newly synthetized membranes have been measured using an electrodialysis cell at a laboratory scale and compared to commercial membranes. All the experiments have been performed using synthetic brackish water solutions prepared from sodium chloride salts with different concentrations (varying from 0.5 to 5.0 g/L). The concentration of different water samples obtained has been found to be below the amount recommended by the World Health Organization (WHO) for drinking water.     

Quantitative analysis of MWCNT agglomeration in polymeric‐based membranes using atomic force microscope

In this work, we performed an analysis on the surface properties of polyethersulfone (PES)‐based ultrafiltration membranes that were prepared by incorporating acid functionalized multiwalled carbon nanotube (f‐MWCNT) and polyvinylpyrrolidone into membrane matrix via simple blending method. The bonding‐chemistry of the nanocomposites implanted within the PES membrane was investigated by Fourier transform infrared spectrometer while atomic force microscope was employed to observe the distribution of f‐MWCNT in the membrane matrix and further measured its agglomeration quantitatively. The resultant 3D atomic force microscope images provided the most satisfactory way to examine the distribution of nanomaterials in the membranes, and with the help of ‘point profile data’ the maximum height and width of the agglomerated cluster could be quantitatively calculated. Moreover, the surface profile studies of the membrane surface provided the information about the length, volume, area, perimeter, radius and diameter of grains. It was observed that PES/nanocomposite blended membranes were held together via strong hydrogen bonding, but poor dispersion of MWCNT in the membrane matrix reduced the membrane performance in terms of protein (pepsin and bovine albumin serum) rejection and increased the surface roughness. Copyright © 2016 John Wiley & Sons, Ltd.     

Synthesis and characterization of hydrophilicity-controlled poly(arylene ether sulfone) copolymers with phenolphthalein-based carboxylic acid groups for separation membrane applications

Abstract

Hydrophilicity-controlled poly(arylene ether sulfone) copolymers with phenolphthalein-based carboxylic acid groups (PES-COOH-X) were synthesized via direct copolymerization by adjusting the feed molar ratio. The chemical structures of the obtained copolymers were confirmed by ¹H nuclear magnetic resonance (NMR) spectroscopy. The copolymers showed good solubility in common aprotic solvents and exhibited excellent mechanical properties. The water contact angles of the obtained copolymers could be reduced by approximately 52% from 92.1° to 44.2° with increasing content of phenolphthalein-derived monomer, 2-[bis(4-hydroxyphenyl)methyl] benzoic acid (PPH-COOH), in the feed molar ratio. A series of PES-COOH-X membranes was prepared via a conventional immersion precipitation phase inversion method. The effects of the monomer feed molar ratio on the morphology, hydrophilicity, pure water flux, and water uptake of the prepared membranes were investigated. The results showed that the pure water flux of the PES-COOH-X membranes was significantly enhanced by almost a factor of two as compared to the pristine PES membrane. From the water contact angle data, it was identified that the hydrophilicity of the membranes was increased rapidly with increasing PPH-COOH content in the membranes. These hydrophilicity-controlled poly(arylene ether sulfone) copolymers may be considered as good candidates for separation membrane materials.     

Characteristics of polyethersulfone/sulfonated polyimide blend membrane for proton exchange membrane fuel cell

Solution-cast membranes from sulfonated polyimide (SPI) and its blend were prepared from polyethersulfone (PES) and SPI. The water uptake and swelling were tested and compared between the SPI membrane and the four kinds of blend membranes. Through comparison of the stability of the membranes, we concluded that the PES could greatly increase the stability of the whole membrane and restrict the swelling. However, the PES did not decrease the water uptake very much. We also compared the fuel cell performance with different membranes. The performance was decreased when the content of the PES in the blend membrane increased. The loss of the fuel cell performance with the blend membranes did not decrease very much before the content of the PES was exceeded 20%. It was prospected that the blend membrane could increase the stability of the SPI and, more importantly, even replace the commercial Nafion membranes.     

磺化聚醚砜/薄水铝石复合质子交换膜的性能

为了提高膜的阻醇性能和高温下的质子传导性, 在磺化聚醚砜(SPES)中掺杂一种吸湿性的无机物AlOOH, 制备了一种新型的SPES/AlOOH复合质子交换膜. 并经傅里叶变换红外(FTIR)光谱、热失重(TGA)、扫描电镜(SEM)等手段对膜的结构和性能进行了表征. 结果表明: 复合膜较纯SPES膜具有更高的热稳定性和吸水率; SEM图片显示AlOOH在膜中分布均匀. 复合膜在高温下具有良好的质子传导性, 掺杂量为10%(w)的复合膜在120 °C下的质子传导率仍可保持在0.014 S·cm^-1左右; 随着AlOOH含量的增加, 复合膜的阻醇性能大大提高, 这表明该复合膜在直接甲醇燃料电池中具有良好的应用前景.     

Energy material - the role of silicotungstic acid and fly ash in sulfonated poly (ether sulfone) composites for PEMFC applications

The composite polymer electrolyte membranes were prepared from sulfonated poly (ether sulfone) (SPES), silicotungstic acid (STA) and fly ash (FA). Post sulfonation process was adopted to synthesize SPES using sulphuric and chlorosulfonic acid. The prepared electrolyte membranes were examined by water uptake capacity, swelling ratio, ion-exchange ability, proton conductivity, thermal stability and electrochemical performance for evaluating the pertinence of these membranes in fuel cell applications. As such the pristine membrane restricts with the proton conductivity of 0.042?S cm^?1 at 30?°C and 0.060?S cm^?1 at 90?°C while the polymer composite membrane, SP-STA-FA-10 reveals the maximum conductivity of 0.054?S cm^?1 at 30?°C and 0.073?S cm^?1 at 90?°C. It also exhibits good thermal stability than that of the pure membrane. The membrane electrode assemblies (MEAs) have been successfully developed from SPES as well as SP-STA-FA-10 membranes and their electrochemical performance were studied the wide range of current density. Herein, the composite membranes derived from SPES, STA and FA can be viable candidates for fuel cell applications.     

Synthesis and characterization of asymmetric polyethersulfone membranes: effects of concentration and polarity of nonsolvent additives on morphology and performance of the membranes

In this study, effects of methanol, ethanol and 1‐propanol as variable nonsolvent additives (NSAs) on the morphology and performance of flat sheet asymmetric polyethersulfone (PES) membranes were investigated. The membranes were prepared from PES/Polyvinylpyrrolidone (PVP)/N‐methyl‐2‐pyrrolidone (NMP) system via phase inversion. The obtained results indicate that with the addition of NSAs to the casting solution, the membrane morphology changes slowly from macrovoids to an asymmetric structure with finger‐like pores. By increasing the NSAs concentrations in the casting solution and decreasing their polarities, the membrane structure changes from finger‐like pores to sponge. The AFM and SEM images reveal that addition of NSA to the casting solution decreases the pore size of the prepared membranes and reduces the pure water flux and BSA solution flux, while increasing the protein rejection. Surface analysis of the membranes showed that mean pore size and surface porosity of the prepared membranes with NSAs in the casting solution are smaller compared with those of the membrane prepared with no NSA. Pure water flux and BSA solution flux through the membranes decrease and BSA rejection increases with increase in the concentration of NSAs and decrease in their polarity. Finally, it can be concluded that the T_g values of the PES membranes increase by addition of NSAs to the casting solution. Copyright © 2009 John Wiley & Sons, Ltd.