高温二维液相色谱系统的构建及其评价

在二维液相色谱中, 第二维的分离速度是制约其发展的重要因素. 升高色谱柱温度可以有效降低流动相粘度, 加快溶质在两相间的传质速率, 有效加快分析速度. 以离子交换色谱法(WAX)为第一维分离模式和反相色谱法(RP)为第二维分离模式, 十通阀和两个捕集柱为接口, 通过将第二维色谱柱温度升高到80 ℃和提高流量到3 mL/min, 构建了高温WAX/RP二维液相色谱系统. 以4种标准蛋白的酶解物为样品评价系统的分离性能, 第一维共有33个馏分被捕集并导入到第二维分析, 高温二维液相色谱系统识别出187个色谱峰.     

去除血浆中高丰度蛋白质的二维液相色谱体系的建立

血浆中高丰度蛋白质的存在严重干扰低丰度蛋白质的检测,是困扰血浆蛋白质组学研究的技术瓶颈之一。针对这一热点问题,建立了一种二维液相色谱(强阴离子交换色谱-反相高效液相色谱)分离系统,对血浆中的高丰度蛋白质进行了色谱定位并进行去除。选择TSKgel SuperQ-5PW为第一维色谱分离柱,第二维色谱分离采用Jupiter C4柱,对第一维的馏分进行进一步的分离。通过梯度优化,血浆样品经过二维系统得到充分分离。第二维分离过程中从紫外信号强度高(215 nm,大于20 mAU)的峰中选择10个峰,利用液相色谱-串联质谱鉴定出32种高丰度蛋白质,包括人血清白蛋白、免疫球蛋白G等高丰度蛋白质。该体系为血浆中更多高丰度蛋白质的去除以及血浆蛋白质组学的更深入研究提供了重要思路。     

离线二维液相色谱法分离巴天酸模根的化学成分

建立了离线二维反相/反相液相色谱分离体系（2D-RPLC/RPLC）,对巴天酸模中的化学成分进行分离。通过比较巴天酸模乙酸乙酯萃取液在环氧四氮唑和Unitary C18色谱柱上的高效液相色谱图,确定以环氧四氮唑色谱柱为第一维色谱柱,以Unitary C18色谱柱为第二维色谱柱。流动相均采用0.1%（v/v）甲酸水溶液和甲醇,梯度洗脱。经一维色谱分离后,共收集18个流分,采用二维色谱对这18个流分进行了进一步的分离分析。实验结果表明,该二维色谱分离方法高效、可行,为巴天酸模药材的微量组分的分离以及活性化合物的筛选提供了分离方法。     

二维液相色谱(SCX/RP)系统的构建及对珠蛋白水解产物的研究

以十通阀为切换接口, 构建了SCX/RP常规柱二维液相色谱系统, 并以珠蛋白水解产物的分析对其加以评价. 样品首先由第一维阳离子交换色谱(Hypersil SCX, 100 mm×4.6 mm I.D.)在pH 4.0的磷酸盐缓冲体系中分离, 洗脱产物进入切换接口, 样品组分被富集在捕集柱(Hypersil BDS C18, 15 mm×4.6 mm I.D.)中, 进一步脱盐后被导入第二维反相色谱(Hypersil BDS C18, 250 mm×4.6 mm I.D.)分离分析. 阳离子交换色谱采用逐步增加盐浓度的12步台阶等度间断方式洗脱, 每次将洗脱产物捕集在捕集柱中进而由反相色谱分析, 实现对第一维洗脱产物的切割转移及第二维分析. 与一维色谱相比, 二维液相色谱系统的分辨率、峰容量也得到提高, 系统峰容量达到2280.     

亲水/反相二维制备液相色谱法分离纯化络石藤中的化学成分

建立了亲水/反相二维制备液相色谱(Pre-2D-HILIC/RPLC)分离纯化络石藤中化学成分的分析方法。络石藤药材经醇提、活性炭脱色后用反相固相萃取柱除去色素和强极性物质,最终得到干燥的浅黄色粉末。一维亲水色谱选择Click XIon色谱柱(250 mm×20 mm,10μm)作为固定相,水和乙腈作为流动相,进行梯度洗脱,以紫外触发模式收集馏分,共得到15个组分。二维反相色谱选择C18色谱柱(250 mm×20 mm,5μm)作为固定相,水和乙腈作为流动相,进行梯度洗脱,最终得到14个高纯度化合物,并通过质谱和核磁共振对其进行确认。实验结果表明,该法具有良好的正交选择性,可以有效提高分离度和峰容量,对于分离络石藤等复杂样品具有重要意义。     

IEX/RP二维液相色谱中弱保留组分收集模式的构建及系统评价

以十通阀和捕集柱接口形式,构建了弱阴离子交换/反相(WAX/RP)二维液相色谱分离系统.通过将第一维离子交换色谱分析中的前部集中洗脱出的弱保留组分收集后单独分析,剩余样品进一步采用二维液相色谱分析,可以有效避免第二维色谱柱对特殊样品局部集中流出导致的第二维分离超柱容量问题,提高了系统的整体分离能力.使用4种蛋白胰蛋白酶酶解后的多肽样品评价该系统,在不分流的系统中共检测到115个峰.对第一维分离的前15 min分流后得到的组分单独分析,共识别出58个峰,后续的二维分离中共得到78个峰.2种方法相比,第二种方法检测峰数增加了21个,一些低丰度的组分在弱保留组分收集后被识别.     

六味地黄丸组分的二维液相色谱分离

以1个常规六通阀直接连接两支常规尺寸的色谱柱(250 mm×4.6 mm i.d.),构建简单的SCX/RP在线二维液相色谱系统,对中成药六味地黄丸组分进行了优化分离。样品经过第一维阳离子交换色谱(Hypersil SCX),洗脱产物分离后通过六通阀直接富集到反相分析柱(C18)顶端,被转移到第二维色谱柱上继续进行分离。经过11步不连续的线性梯度洗脱,二维分离系统出峰数量达到550多个,峰容量达到2266。构建的二维液相色谱系统结构简单,与一维色谱相比,具有分辨率高、峰容量大的特点。     

六昧地黄丸组分的二维液相色谱分离

以1个常规六通阀直接连接两支常规尺寸的色谱柱(250 mm×4.6 mm i.d.),构建简单的SCX/RP在线二维液相色谱系统,对中成药六味地黄丸组分进行了优化分离.样品经过第一维阳离子交换色谱(Hypersil SCX),洗脱产物分离后通过六通阀直接富集到反相分析柱(C18)顶端,被转移到第二维色谱柱上继续进行分离.经过11步不连续的线性梯度洗脱,二维分离系统出峰数量达到550多个,峰容量达到2266.构建的二维液相色谱系统结构简单,与一维色谱相比,具有分辨率高、峰容量大的特点.     

二维液相色谱接口的改进及其在蛋白质组学研究中的应用

随着蛋白质组学、本草物质组学等组学概念的提出,所需分析的样品的成分越来越复杂,因此具有强大分离能力的多维液相色谱技术受到人们越来越多的关注。二维液相色谱中第二维的分离性能和速度是整个分离系统性能的关键。基于捕集柱模式,我们采用经特殊设计的流路系统,使得双捕集柱型接口具有预分离的功能。样品从第一维流出以后被富集在捕集柱1的柱头,经过脱盐后,正冲捕集柱,捕集柱1与第二维色谱柱联用对富集的样品进行分离,增加了第二维分离效率。当捕集柱上的样品全部被洗脱到第二维色谱柱上时,捕集柱2已经完成对第一维洗脱液中样品的捕集和脱盐,此时将阀进行切换,捕集柱2与第二维色谱柱直接相连进行洗脱。循环切换捕集柱1和捕集柱2,维持较高的阀切换频率,实现了第二维色谱柱的连续洗脱。因此保证了第二维分离具有较快速度,同时具有较高的分离效率。使用35 mm长捕集柱和十通阀为接口,以弱阴离子交换(WAX)色谱为第一维分离模式,以反相(RP)色谱为第二维分离模式,构建了WAX-RP二维液相色谱系统(2D-LC system)。以小鼠血清为样品对系统进行了初步评价。色谱流出曲线出现了明显的界面现象,这是由于捕集柱流动相中含有的较多盐分流出时的背景吸收造成的。同时,由于界面两侧的流动相黏度不同产生了黏性指进(VF)现象。当第二维色谱柱长度为50 mm时,理论上可将第二维分离效能提高70%。该接口可以应用于多种二维液相色谱模式,适用于蛋白质组学和本草物质组学研究中对于复杂样品的分离分析。     

凝胶过滤/离子交换全二维液相色谱系统的构建与评价

基于蛋白质的尺寸及带电性质,将凝胶过滤色谱(GFC)与离子交换色谱(IEC)两种分离模式结合,采用双捕集柱接口构建了GFC/2×IEC二维液相色谱(2-D LC)分离系统,同时考虑离子交换色谱分离蛋白质对等电点范围的限制,进一步结合中心切割平行柱的方法实现对蛋白质的全二维分离。为与后续蛋白质在线酶解、多肽分离及质谱鉴定匹配,系统中采用常规柱以保证蛋白质质谱鉴定对样品量的要求,3种常规分离柱分别选用凝胶过滤色谱柱TSK-GEL G3000SW_(XL)(300 mm×7.8 mm,5μm)、强阴离子交换色谱柱Hypersil SAX(100 mm×4.6 mm,10μm)和强阳离子交换色谱柱Hypersil SCX(100 mm×4.6 mm,10μm)。最终以酵母细胞蛋白质提取液为样品,对构建的二维系统加以评价,在总蛋白质浓度13.5 mg/mL、上样体积100μL的条件下,将第一维分离等时间切割17次,并将切割馏分全部导入第二维继续分离,二维系统在148 min内获得的总峰容量达到884。说明所构建的系统可以用于蛋白质的在线全二维分离。     

Multidimensional capillary array liquid chromatography and matrix-assisted laser desorption/ionization tandem mass spectrometry for high-throughput proteomic analysis

A two-dimensional capillary array liquid chromatography system coupled with matrix-assisted laser desorption/ionization (MALDI) mass spectrometry (MS) was developed for high-throughput comprehensive proteomic analysis, in which one strong cation-exchange (SCX) capillary chromatographic column was used as the first separation dimension and 10 parallel reversed-phase liquid chromatographic (RPLC) capillary columns were used as the second separation dimension. A novel multi-channel interface was designed and fabricated for on-line coupling of the SCX to RPLC column array system. Besides the high resolution based on the combination of SCX and RPLC separation, the developed new system provided the most rapid two-dimensional liquid chromatography (2D-LC) separation. Ten three-way micro-splitter valves used as stop-and-flow switches in transferring SCX fractions onto RPLC columns. In addition, the three-way valves also acted as mixing chambers of RPLC effluent with matrix. The system enables on-line mixing of the LC array effluents with matrix solution during the elution and directly depositing the analyte/matrix mixtures on MALDI plates from the tenplexed channels in parallel through an array of capillary tips. With the novel system, thousands of peptides were well separated and deposited on MALDI plates only in 150min for a complex proteome sample. Compared with common 2D-LC system, the parallel 2D-LC system showed about 10-times faster analytical procedure. In combination with a high throughput tandem time of flight mass spectrometry, the system was proven to be very effective for proteome analysis by analyzing a complicated sample, soluble proteins extracted from a liver cancer tissue, in which over 1202 proteins were identified.     

A comprehensive two-dimensional normal-phase × reversed-phase liquid chromatography based on the modification of mobile phases

A comprehensive orthogonal two-dimensional liquid chromatography (2D-LC) based on the modification of mobile phases was developed with a sample loop–valve interface. To improve the compatibility of mobile phases and analysis speed, some special solvents were chosen as the mobile phases, and the column temperature was elevated to decrease the viscosity of mobile phases of reversed-phase liquid chromatography (RPLC). Based on this principle, the first dimension was normal-phase liquid chromatography (NPLC) with a SiO₂ column, and the second dimension was reversed-phase liquid chromatography containing two tandem C18 columns. 1,4-Dioxane was used in the NPLC mobile phase, and isopropyl alcohol was employed in the RPLC mobile phase. Moreover, the elevated column temperature enabled the reduction of the backpressure and using tandem C18 columns to improve the resolving power in RPLC. The new comprehensive 2D-LC system and applied strategy offered a novel idea for construction of 2D-LC system. A traditional Chinese medicine, Zhengtian pill, was used as the test sample to evaluate the constructed 2D-LC system. 876 peaks were detected, and the peak capacity reached 1740.     

Automated clean-up, separation and detection of polycyclic aromatic hydrocarbons in particulate matter extracts from urban dust and diesel standard reference materials using a 2D-LC/2D-GC system

A multidimensional, on-line coupled liquid chromatographic/gas chromatographic system was developed for the quantification of polycyclic aromatic hydrocarbons (PAHs). A two-dimensional liquid chromatographic system (2D-liquid chromatography (LC)), with three columns having different selectivities, was connected on-line to a two-dimensional gas chromatographic system (2D-gas chromatography (GC)). Samples were cleaned up by combining normal elution and column back-flush of the LC columns to selectively remove matrix constituents and isolate well-defined, PAH enriched fractions. Using this system, the sequential removal of polar, mono/diaromatic, olefinic and alkane compounds from crude extracts was achieved. The LC/GC coupling was performed using a fused silica transfer line into a programmable temperature vaporizer (PTV) GC injector. Using the PTV in the solvent vent mode, excess solvent was removed and the enriched PAH sample extract was injected into the GC. The 2D-GC setup consisted of two capillary columns with different stationary phase selectivities. Heart-cutting of selected PAH compounds in the first GC column (first dimension) and transfer of these to the second GC column (second dimension) increased the baseline resolutions of closely eluting PAHs. The on-line system was validated using the standard reference materials SRM 1649a (urban dust) and SRM 1975 (diesel particulate extract). The PAH concentrations measured were comparable to the certified values and the fully automated LC/GC system performed the clean-up, separation and detection of PAHs in 16 extracts in less than 24 h. The multidimensional, on-line 2D-LC/2D-GC system eliminated manual handling of the sample extracts and minimised the risk of sample loss and contamination, while increasing accuracy and precision.

Silica-based monolithic columns with mixed-mode reversed-phase/weak anion-exchange selectivity principle for high-performance liquid chromatography

This article describes the synthesis, chromatographic characterization, and performance evaluation of analytical (100 x 4.6 mm id) and semipreparative (100 x 10 mm id) monolithic silica columns with mixed-mode RP/weak anion-exchange (RP/WAX) surface modification. The monolithic RP/WAX columns were obtained by immobilization of N-(10-undecenoyl)-3-aminoquinuclidine onto thiol-modified monolithic silica columns (Chromolith) by a radical addition reaction. Their chromatographic characterization by Engelhardt and Tanaka tests revealed slightly lower hydrophobic selectivities than C-8 phases, as well as higher polarity and also improved shape selectivity than RP-18e silica rods. The surface modification enabled separation by both RP and anion-exchange chromatography principles, and thus showed complementary selectivities to the RP-18e monoliths. The mixed-mode monoliths have been tested for the separation of peptides and turned out to be particularly useful for hydrophilic acidic peptides, which are usually insufficiently retained on RP-18e monolithic columns. Compared to a corresponding particulate RP/WAX column (5 microm, 10 nm pore diameter), the analytical RP/WAX monolith caused lower system pressure drops and showed, as expected, higher efficiency (e.g. by a factor of about 2.5 lower C-term for a tetrapeptide). The upscaling from the analytical to semipreparative column dimension was also successful.     

Ultra rapid liquid chromatography as second dimension in a comprehensive two-dimensional method for the screening of pharmaceutical samples in stability and stress studies

Separation orthogonality has been explored with respect to comprehensive two-dimensional liquid chromatography (2D-LC) for different reversed-phase stationary phases. The outcome of this study points out an SB-CN x BEH-C18 combination, used in the first and the second dimension, respectively, as the most orthogonal chromatographic system for the samples assayed. The present investigation reports the employment of an ultra high pressure liquid chromatography system (UPLC) as the second chromatographic dimension, increasing the sensitivity and the speed, completing the whole chromatographic separation in a reasonable time frame. Finally, an off-line 2D-LC method with diode array detection based on the UPLC has been optimized, allowing the separation and minimizing the run time. SB-CN and BEH-C18 were employed as first and second dimension, respectively, with gradient elution applied in each dimension. Alprazolam degraded tablets were studied as a proof of concept of the utility of this type of setups for impurity profiling of complex samples.     

Mixed retention mechanism of proteins in weak anion-exchange chromatography

Using four commercial weak anion-exchange chromatography (WAX) columns and 11 kinds of different proteins, we experimentally examined the involvement of hydrophobic interaction chromatography (HIC) mechanism in protein retention on the WAX columns. The HIC mechanism was found to operate in all four WAX columns, and each of these columns had a better resolution in the HIC mode than in the corresponding WAX mode. Detailed analysis of the molecular interactions in a chromatographic system indicated that it is impossible to completely eliminate hydrophobic interactions from a WAX column. Based on these results, it may be possible to employ a single WAX column for protein separation by exploiting mixed modes (WAX and HIC) of retention. The stoichiometric displacement theory and two linear plots were used to show that mechanism of the mixed modes of retention in the system was a combination of two kinds of interactions, i.e., nonselective interactions in the HIC mode and selective interactions in the IEC mode. The obtained U-shaped elution curve of proteins could be distinguished into four different ranges of salt concentration, which also represent four retention regions.     

Two-dimensional liquid chromatography analysis of synthetic polymers using fast size exclusion chromatography at high column temperature

In recent years, two-dimensional liquid chromatography (2D-LC) has been used increasingly for the analysis of synthetic polymers. A 2D-LC analysis provides richer information than a single chromatography analysis at the cost of longer analysis time. The time required for a comprehensive 2D-LC analysis is essentially proportional to the analysis time of the second dimension separation. Many of 2D-LC analyses of synthetic polymers have employed size exclusion chromatography (SEC) for the second-dimension analysis due to the relatively short analysis time in addition to the wide use in the polymer analysis. Nonetheless, short SEC columns are often used for 2D-LC analyses to reduce the separation time, which inevitably deteriorates the resolution. In this study, we demonstrated that high temperature SEC can be employed as an efficient second-LC in the 2D-LC separation of synthetic polymers. By virtue of high temperature operation (low solvent viscosity and high diffusivity of the polymer molecules), a normal length SEC column can be used at high flow rate with little loss in resolution.