Cu－Cr_2O_3催化合成丙烯酰胺中铬的助催化作用

Ｃｕ－Ｃｒ_２Ｏ_３催化合成丙烯酰胺中铬的助催化作用李晶明，杨博，周贵林，谢筱帆，李圭甲（中国科学院长春应用化学研究所长春１３００２２）关键词Ｃｕ－Ｃｒ＿２Ｏ＿３催化剂，丙烯腈，丙烯酰胺，催化水合，反应机理在还原铜催化剂中加铬可提高丙烯腈（ＡＮ）催化水...     

CaO／La2O3催化剂上的甲烷氧化偶联反应的研究

研究了不同配比的ＣａＯ／Ｌａ_２Ｏ_３催化剂对甲烷氧化偶联反应的催化性能。适当配比的ＣａＯ／Ｌａ_２Ｏ_３催化剂的性能明显优于纯Ｌａ_２Ｏ_３或ＣａＯ，在钙含量为２４％和８１％（Ｃａ／（ｃａ＋Ｌａ））处，Ｃ_２选择性和Ｃ_２收率分别出现两个峰值。同时还发现，１３％ＣａＯ／Ｌａ_２Ｏ_３样品显示出良好的低温催化性能，在５５０℃反应温度下获得了３１．５％的甲烷转化率和４５％的Ｃ_２选择性。并采用ＸＲＤ、ＸＰＳ和Ｃｏ_２ＴＰＤ等技术研究了催化剂的结构。结果表明，ＣａＯ／Ｌａ_２Ｏ_３体系催化剂上没有检测到新物相产生。但是，催化剂中ＣａＯ与Ｌａ_２Ｏ_３两组分之间存在着相互作用，有利于表面活性中心的形成。     

二氯甲烷在担载型三氧化铬催化剂上的催化缓解

本文研究了二氯甲烷在不同的担载型ＣｒＯ３催化剂上的催化降解。实验揭示：碳纤维的单丝直径粗细，吸附能力，ＺＳＭ－５沸石中晶格外铝的含量以及Ａｌ２Ｏ３的形貌与物相等均明显影响催化剂的催化活性与选择性。文中对不同的载体作了比较，还对活性组分ＣｒＯ３的铬的价态，用氢气还原与空气灼烧两种预处理对催化行为的影响进行了讨论。     

添加Ag对Cu／γ－Al_2O_3催化剂

运用ＢＥＴ、ＸＲＤ、ＴＰＲ及苯和丙酮氧化活性测定等方法研究了Ｃｕ／γ－Ａｌ_２Ｏ_３和Ｃｕ－Ａｇ／γ－Ａｌ_２Ｏ_３催化剂的还原性能和对有机物的催化活性。结果表明：不同金属负载量的Ｃｕ／γ－Ａｌ_２Ｏ_３催化剂的还原性能有明显差异，反映出催化剂表面存在着不同种类的铜物种。Ａｇ的添加使催化剂的ＴＰＲ峰位发生明显位移，提高了催化剂对有机物的催化氧化活性。同时还发现，热处理温度对催化剂中铜物种的存在形式、催化还原特性及催化活性有明显影响．Ａｇ在一定程度上提高了催化剂的热稳定性。     

甲烷部分氧化制合成气Ⅱ．镍系催化剂的反应性能

主要用第四周期金属元素的氧化物与Ａｌ２Ｏ３的复合氧化物催化剂上甲烷氧化的结果证实了催化剂设计中的预测：（１）催化剂首先应能解离活化甲烷，（２）催化剂要能较快地活化Ｏ２分子．只有同时满足这两个条件，催化剂才可能有较好的甲烷部分氧化活性．第四周期元素中只有镍具有这样的性质．Ｃｕ，Ｍｎ，Ｃｒ，Ｌａ，Ｃａ，Ｚｎ等氧化物的添加可明显提高Ｎｉ－Ａｌ２Ｏ３催化剂的甲烷部分氧化性能，其中Ｃｕ的助催化性能最好．催化剂ＮｉＯ－ＣｕＯ－Ａｌ２Ｏ３，ＮｉＯ－ＭｎＯ－Ａｌ２Ｏ３，ＮｉＯ－Ｃｒ２Ｏ３－Ａｌ２Ｏ３的反应活性和选择性顺序，与金属Ｃｕ，Ｍｎ，Ｃｒ上ＣＯ和Ｈ２脱附的顺序是一致的     

甲烷部分氧化制合成气的钙钛矿型致密透氧膜反应器的数值模拟(英文)

采用等温理论模型,以甲烷催化氧化制合成气为模型反应,模拟非担载钙钛矿型致密透氧膜反应器的性能。分别研究了Ｌａ_０．２Ｂａ_０．８Ｆｅ_０．８Ｃｏ_０．２Ｏ_(３－δ)、Ｌ３０．２Ｓｒ０．８Ｆｅ０．８Ｃｏ０．２Ｏ３－δ和ＳｒＦｅＣｏ０．５Ｏｘ三种透氧速率不同的膜材料、膜反应器的尺寸以及反应工艺条件对ＣＨ４转化率、ＣＯ选择性和Ｈ２／ＣＯ摩尔比的影响,对膜反应实验具有指导意义。     

Cr－Ag／γ－Al_2O_3催化剂在CO氧化反应中Ag的助催化作用

Ｃｒ－Ａｇ／γ－Ａｌ_２Ｏ_３催化剂在ＣＯ氧化反应中Ａｇ的助催化作用陈平，朱波，钟依均，罗孟飞，李少华，吴红丽（杭州大学催化研究所杭州３１００２８）（杭州大学中心实验室杭州）关键词氧化铬，氧化银，氧化铝，负载催化剂，还原特性，一氧化碳，氧化活性催化燃烧...     

碱改性γ－Al_2O_3催化剂表面碱强度分布与COS水解活性的研究

用非水滴定法和Ｈａｍｍｅｔｔ系列指示剂测定了ＣＯＳ水解碱改性γ－Ａｌ_２Ｏ_３催化剂的表面碱强度分布．发现表面碱强度分布不均匀与表面能量分布不均匀相呼应．采用零点酸碱强度（Ｈ_（０，ｍａｘ））及碱中心区域分析法，Ｂｒｏｎｓｔｅｄ催化定律，进一步证实ＣＯＳ水解反应具有明显碱催化特征，较高活性催化剂的Ｈ_（０，ｍａｘ）一般为１０左右，对ＣＯＳ水解反应起主要作用的碱性中心的碱强度（Ｈ_０）为４．８≤Ｈ_０≤９．８．对碱金属氧化物改性后的γ－Ａｌ_２Ｏ_３催化剂，Ｂｒｏｎｓｔｅｄ规律在每个碱强度分区域内是适用的．     

异丁烷催化脱氢制异丁烯Cr2O3／Al2O3体系催化剂

对异丁烷催化脱氢催化剂进行了研究。助催化剂Ｋ２Ｏ,ＣｕＯ的引入改进了Ｃｒ２Ｏ３／Ａｌ２Ｏ３催化剂的活性和抗积炭性能。同时考察了原料气空速、反应温度以及催化剂制备的焙烧温度对Ｋ２Ｏ－ＣｕＯ－Ｃｒ２Ｏ３／Ａｌ２Ｏ３催化剂反应性能的影响。ＸＲＤ谱图表明,Ｃｒ２Ｏ３在催化剂中高分散,７００℃焙烧的催化剂中出现的ＫＣｕＯ晶相对催化剂活性不利。用ＮＨ３－ＴＰＤ和ＣＯ２－ＴＰＤ检测了催化剂表面的酸碱中心,表明助     

NO的催化氧化

采用傅里叶变换红外光谱定量分析方法研究了γ－Ａｌ２Ｏ３,ＴｉＯ２和硅胶负载的金属氧化物和贵金属催化剂对ＮＯ催化氧化反应的活性,考察了反应温度、活性组分负载量、空速及预氧化还原处理等因素对催化剂活性的影响,并以ＮＯ的催化氧化机理为基础,对各种因素影响机理进行了分析,实验结果表明,ＭｎＯ,Ｃｒ２Ｏ３和Ｃｏ３Ｏ４催化剂的活性较好：预处理条件对贵金属催化剂Ｐｔ／Ａｌ２Ｏ３的活性影响较大,不同载体及不同的活     

芳醚的催化氧化反应

以取代芳醚为原料,碘苯醋酸酯为氧化剂,二氯甲烷为溶剂,在醋酸铑催化下合成了一系列醌类化合物,其结构经1H NMR,13C NMR和HR-MS确证。     

CrO3在γ-Al2O3和SiO2载体表面的分散状态

用X光衍射(XRD)方法研究了CrO_3/SiO_2和CrO_3/γ-Al_2O_3体系。用相定量外推法测定活性组份在载体表面的最大分散量。在干燥气氛中将CrO_3与载体混合, 并在低于CrO_3熔点的温度下烘烤制备样品, 实验得到CrO_3在SiO_2或者γ-Al_2O_3表面的最大分散量都随温度的升高而增大。CrO_3在SiO_2表面的最大分散量由101 ℃的0.27gCrO_3/g SiO_2到170 ℃的0.38g CrO_3/g SiO_2; CrO_3在γ-Al_2O_3表面的最大分散量由120 ℃的0.22g CrO_3/g γ-Al_2O_3到171 ℃的0.42g CrO_3/g γ-Al_2O_3。CrO_3在SiO_2或γ-Al_2O_3表面的最大分散量超过密置单层量, 可由易聚合形成同多酸根来解释。     

Effect of potassium on alumina supported chromium oxide catalysts for methylene chloride oxidation

Alumina supported chromium oxide catalysts added potassium were prepared and tested for methylene chloride oxidation. They were investigated by XRD, BET, XPS, chemisorption. Chromium oxide catalyst added potassium of 1 wt.% has a large beneficial effect on activity. This revised version was published online in August 2006 with corrections to the Cover Date.     

New selectivities from old catalysts. Occlusion of Grubbs’ catalysts in PDMS to change their reactions

This article describes new selectivities for Grubbs’ first and second generation catalysts when occluded in a hydrophobic matrix of polydimethylsiloxane (PDMS). Occlusion of catalysts in mm-sized slabs of PDMS is accomplished by swelling with methylene chloride then removing the solvent under vacuum. The catalysts are homogenously dissolved in PDMS yet remain catalytically active. Many substrates that react by olefin metathesis with Grubbs’ catalysts freely dissolved in methylene chloride also react by olefin isomerization with occluded catalysts. Eleven examples of substrates that exhibit dual reactivity by undergoing olefin isomerization with occluded catalysts and olefin metathesis with catalysts dissolved in methylene chloride are reported. Most of these substrates have olefins with allylic phosphine oxides, carbonyls, or ethers. Control experiments demonstrate that isomerization is occurring in the solvent by decomposition of the catalyst from a ruthenium carbene to a proposed ruthenium hydride. This work was extended by heating occluded Grubbs’ first generation catalyst to 100 °C in 90% MeOH in H₂O in the presence of various alkenes to transform the Grubbs’ catalyst into an isomerization catalyst for unfunctionalized olefins. This work demonstrates that occlusion of organometallic catalysts in PDMS has important implications for their reactions and can be used as a method to control which reactions they catalyze.     

Oxidation of Methyl Function of 3,3-(3-Fluorobenzyl)-2-Propanone by Thionyl Chloride

In the presence of a catalytic amount of a tertiary amine, thionyl chloride generally oxidizes carboxylic acids^1,2 and ketones¹ at α carbon atoms to form α-chloro-α-chlorosulfenyl derivatives and their subsequent reaction products. Examination of reaction mixtures of thionyl chloride with a number of variously substituted 4-aryl-2-butanones revealed that in the case of the 3-methoxy or 3-hydroxy derivatives, cyclization onto the aromatic ring to form a benzo[b] thiophene competes quite favorably with cyclization onto enol to form a thietanone.⁴ The results were consistent only with thionyl chloride oxidation proceeding exclusively at the methylene position.     

Synthesis of 1,2-allenic ketones through oxidation of homopropargyl alcohols with CrO_3(cat.)/TBHP under MWI

A CrO₃ catalyzed oxidation of homopropargyl alcohols with tert-butyl hydroperoxide under microwave irradiation was found to be an efficient and rapid alternative for the preparation of 1,2-allenic ketones.The advantages of this procedure include short reaction time,less adverse impact on the environment and reasonably high efficiency.     

Selective Oxidation of Triterpene Alcohols by Sodium Hypochlorite

3-Oxo-triterpenoids were prepared by oxidation of the methyl esters of glycyrrhetic acid, allobetulin, and 20-oxo-29-nor-betulin with sodium hypochlorite in acetic acid or methylene chloride under phase-transfer conditions.     

Aerobic oxidation of phenol to quinone with copper chloride as catalyst in ionic liquid

Aerobic oxidation of 2,3,6-trimethyl-phenol to trimethyl-1,4-benzoquinone with 2.5 mol% copper(II) chloride as catalyst in ionic liquid 1-n-butyl-3-methyl-imidazolium chloride, [BMIm]Cl, with n-butanol as co-solvent affording 86% yield provides a new alternative to the copper(II) chloride catalysed aerobic oxidation. The advantage of this catalytic system is that only a catalytic amount of copper(II) chloride is necessary. This catalytic system is also applicable for oxidation of 2-methyl-1-naphthol to 2-methyl-1,4-naphthoquinone. This catalytic reaction was systematically investigated under different conditions.     

Synthesis, property characterization and photocatalytic activity of the novel composite polymer polyaniline/Bi2SnTiO7

A novel polyaniline/Bi(2)SnTiO(7 )composite polymer was synthesized by chemical oxidation in-situ polymerization method and sol-gel method for the first time. The structural properties of novel polyaniline/Bi(2)SnTiO(7) have been characterized by X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy and X-ray spectrometry. The lattice parameter of Bi(2)SnTiO(7) was found to be a = 10.52582(8) ?. The photocatalytic degradation of methylene blue was realized under visible light irradiation with the novel polyaniline/Bi(2)SnTiO(7) as catalyst. The results showed that novel polyaniline/Bi(2)SnTiO(7 )possessed higher catalytic activity compared with Bi(2)InTaO(7) or pure TiO(2) or N-doped TiO(2) for photocatalytic degradation of methylene blue under visible light irradiation. The photocatalytic degradation of methylene blue with the novel polyaniline/Bi(2)SnTiO(7) or N-doped TiO(2) as catalyst followed first-order reaction kinetics, and the first-order rate constant was 0.01504 or 0.00333 min(-1). After visible light irradiation for 220 minutes with novel polyaniline/Bi(2)SnTiO(7 )as catalyst, complete removal and mineralization of methylene blue was observed. The reduction of the total organic carbon, the formation of inorganic products, SO(4)2- and NO(3-), and the evolution of CO(2) revealed the continuous mineralization of methylene blue during the photocatalytic process. The possible photocatalytic degradation pathway of methylene blue was obtained under visible light irradiation.