Azo Monomers Exhibiting Low Layer Shrinkage at the SmA–SmC Transition and trans–cis Light‐Induced Isomerization

Methacrylic monomers containing a (phenylene)azobenzene unit substituted with a lateral cyano group and alkyl chains of different length are synthesized and characterized by NMR techniques. Their liquid‐crystalline properties are studied by differential scanning calorimetry, polarizing optical microscopy, and X‐ray diffraction. All monomers exhibit a mesomorphic behavior that extends over wide temperature ranges with nematic and orthogonal or tilted smectic‐type mesophases, depending on the length of the terminal chain. The smectic structures are determined to be single‐layered with a low layer shrinkage (<5 %) at the SmA–SmC transition. This atypical behavior is attributed to the combination of a high smectic order promoted by both π–π and bond dipole–bond dipole interactions between cyano‐substituted central cores, and a low correlation between neighboring layers arising from dispersive forces between the end groups (methacrylic group and alkyl chain) of the monomer. On the other hand, the trans–cis isomerization of monomers is induced in solution by irradiating with a UV lamp. High cis‐isomer contents (≥96 %) are obtained at the photostationary state, which is reached in a relatively short time (40 s).     

Thermal properties and ionic conductivity of a polymer prepared by the in situ photopolymerization of a vinylimidazole monomer containing a mesogenic group

We have synthesized liquid crystalline polymers containing an imidazolium salt moiety and a mesogenic group by the in situ photopolymerization of a liquid crystalline vinylimidazole monomer in order to investigate the relationship between their thermal properties and ionic conductivity. A smectic phase was shown by the vinylimidazole monomer. The in situ photopolymerization of the monomer was carried out in the temperature range of the smectic phase. The polymer thus prepared displayed a highly ordered smectic phase in the temperature range between room temperature and about 200°C. The ionic conductivity of the polymer increased with increasing temperature. Anisotropic ionic conductivity behavior was observed for the polymer. The ionic conductivity of the polymer aligned homogeneously is larger than when homeotropically aligned.     

Liquid crystalline behaviour of hydrogen-bonded complexes of alkoxycinnamic acids with octyloxystilbazole

Hydrogen-bonded liquid crystalline complexes have been obtained through 1:1 (molar ratio) complexation of 4-n-alkoxycinnamic acids (nCNA: n = 4, 8, 10, 12, where n is the number of carbons in the alkyloxy chain) and trans-4-octyloxystilbazole (8Sz). These hydrogen-bonded complexes (nCNA8Sz) form stable mesophases. The mesomorphic range was extended by the mixing of complexes. Hexatic modification of smectic B (SmB_h), smectic C (SmC), smectic A (SmA), and nematic mesophases of these complexes were determined by a combination of X-ray diffraction and polarizing optical microscopy. Transitions between the various smectic phases were deduced from the temperature-dependent layer spacing of nCNA8Sz. The layer spacing of these complexes in the SmB_h and SmA phases gradually increased with increasing alkoxy chain length. The favouring of smectic phases in these complexes is believed to originate from the increment of polarity of the mesogen by intermolecular H-bonding.     

Pyrrolidinium Ionic Liquid Crystals

N‐Alkyl‐N‐methylpyrrolidinium cations have been used for the design of ionic liquid crystals, including a new type of uranium‐containing metallomesogen. Pyrrolidinium salts with bromide, bis(trifluoromethylsulfonyl)imide, tetrafluoroborate, hexafluorophosphate, thiocyanate, tetrakis(2‐ thenoyltrifluoroacetonato)europate(III) and tetrabromouranyl counteranions were prepared. For the bromide salts and tetrabromouranyl compounds, the chain length of the alkyl group C_nH_2n+1 was varied from eight to twenty carbon atoms (n=8, 10–20). The compounds show rich mesomorphic behaviour: highly ordered smectic phases (the crystal smectic E phase and the uncommon crystal smectic T phase), smectic A phases, and hexagonal columnar phases were observed, depending on chain length and anion. This work gives better insight into the nature and formation of the crystal smectic T phase, and the molecular requirements for the appearance of this highly ordered phase. This uncommon tetragonal mesophase is thoroughly discussed on the basis of detailed powder X‐ray diffraction experiments and in relation to the existing literature. Structural models are proposed for self‐assembly of the molecules within the smectic layers. In addition, the photophysical properties of the compounds containing a metal complex anion were investigated. For the uranium‐containing mesogens, luminescence can be induced by dissolving them in an ionic liquid matrix. The europium‐containing compound shows intense red photoluminescence with high colour purity.     

Lithium‐Salt‐Containing High‐Molecular‐Weight Polystyrene‐block‐Polyethylene Oxide Block Copolymer Films

Ionic conductivity in relation to the morphology of lithium‐doped high‐molecular‐weight polystyrene‐block‐polyethylene oxide (PS‐b‐PEO) diblock copolymer films was investigated as solid‐state membranes for lithium‐ion batteries. The tendency of the polyethylene (PEO) block to crystallize was highly suppressed by increasing both the salt‐doping level and the temperature. The PEO crystallites completely vanished at a salt‐doping ratio of Li/EO>0.08, at which the PEO segments were hindered from entering the crystalline unit of the PEO chain. A kinetically trapped lamella morphology of PS‐b‐PEO was observed, due to PEO crystallization. The increase in the lamella spacing with increasing salt concentration was attributed to the conformation of the PEO chain rather than the volume contribution of the salt or the previously reported increase in the effective interaction parameter. Upon loading the salt, the PEO chains changed from a compact/highly folded conformation to an amorphous/expanded‐like conformation. The ionic conductivity was enhanced by amorphization of PEO and thereby the mobility of the PEO blocks increased upon increasing the salt‐doping level.     

Photoresponsive Stripe Pattern in Achiral Azobenzene Liquid Crystals

A periodic stripe pattern is found in the nematic phase close to the smectic phase of photoresponsive achiral liquid‐crystalline compounds. The origin of the stripe patterns can be ascribed to an extremely large bent elastic constant K₃₃. In addition, we succeeded in controlling the pattern by the following two methods: 1) the stripe disappears by a trans–cis photoisomerization upon UV light irradiation and reappears upon light termination, and 2) the stripe pattern is stabilized over the whole nematic phase, at approximately 10 °C, by polymerization of the compounds.     

Mesomorphic and conducting properties of dendritic‐linear copolymers via ion‐doped additives

We studied the conducting and mesomorphic behavior of a dendritic‐linear copolymer on adding hydrophilic additives and lithium salts. For the preparation of the pristine block copolymer ( A ), a click reaction of a hydrophobic Y‐shaped dendron block and a hydrophilic linear poly(ethylene oxide) coil with M_n = 750 g mol^?1 was performed. For ionic block copolymer samples ( 1–3 ), a hydrophilic compound ( B ) bearing two tri(ethylene oxide) chains was used as the additive. In all ionic samples, the lithium concentration per ethylene oxide was chosen to be 0.05. As characterized by polarized optical microscopy and small angle X‐ray scattering techniques, copolymer A showed a hexagonal columnar mesophase. On addition of lithium‐doped additives, ionic samples 1 and 2 with the additive weight fractions (f_w) of 10 and 20%, columnar and bicontinuous structures coexisted in the liquid crystalline phase. On the other hand, ionic sample 3 with f_w = 30% displayed only a bicontinuous cubic mesophase. Based on the impedance results, with increasing the amount of additives, the conductivity value increased from 3.80 × 10^?6 to 2.34 × 10^?5 S cm^?1 at 35 °C. The conductivity growth could be explained by the interplay of the plasticization effect of the mobile additive and the morphological transformation from 1D to 3D of the ion‐conducting cylindrical cores. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Ionic conductivity probed in main chain liquid crystalline azobenzene polyesters

Three main chain thermotropic liquid crystalline (LC) azobenzene polymers were synthesized using the azobenzene twin molecule (P4P) having the structure Phenylazobenzene‐tetraethyleneglycol‐Phenylazobenzene as the AA monomer and diols like diethylene glycol, tetraethylene glycol (TEG), and hexaethylene glycol as the BB comonomer. Terminal ? C(O)OMe units on P4P facilitated transesterification with diols to form polyesters. All polymers exhibited stable smectic mesophases. One of the polymers, Poly(P4PTEG) was chosen to prepare composite polymer electrolytes with LiCF₃SO₃ and ionic conductivity was measured by ac impedance spectroscopy. The polymer/0.3 Li salt complex exhibited a maximum ionic conductivity in the range of 10^?5 S cm^?1 at room temperature (25 °C), which increased to 10^?4 S cm^?1 above 65 °C. The temperature dependence of ionic conductivity was compared with the phase transitions occurring in the sample and it was observed that the glass transition had a higher influence on the ionic conductivity compared to the ordered LC phase. Reversible ionic conductivity switching was observed upon irradiation of the polymer/0.3 Li salt complex with alternate UV and visible irradiation. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 629–641     

Side chain type ionic liquid crystalline polymers having high Preliminary communication molecular weight

Side chain type ionic liquid crystalline polymers having a 4-(1,3-dioxan-2-yl)pyridinium structure in their mesogenic side chain were synthesized. These polymers exhibited the smectic A phase. The molecular weights of these ionic liquid crystalline polymers are very high, e.g. for compound 7 - 2 M _w = 486 000.     

Photocontrolled Phase Transitions and Reflection Behaviors of Smectic Liquid Crystals by a Chiral Azobenzene

The photocontrolled phase transitions and reflection behaviors of a smectic liquid crystal, 4‐octyl‐4′‐cyanobiphenyl (8CB), tuned by a chiral azobenzene, are systematically investigated. For the smectic 8CB doped with the chiral azobenzene (1R)‐(?)‐4‐n‐hexyl‐4′‐menthylazobenzene (ABE), the initial smectic phase can be switched to cholesteric and then to isotropic upon UV irradiation due to the trans‐to‐cis photoisomerization of ABE; however, no reflection band is observed. For the smectic 8CB doped with ABE and the chiral agent (S)‐(?)‐1,1′‐binaphthyl‐2,2′‐diol (BN), a reflection band located in the short‐wavelength infrared region is observed, which disappears after further UV irradiation. For the smectic 8CB doped with ABE and a chiral agent with higher helical twisting power, (S)‐2,2′‐methylendioxy‐1,1′‐binaphthalene (DBN), a phototunable system with cholesteric pitch short enough to reflect visible light is demonstrated. With a given concentration of the chiral dopant DBN, a reversible reflection color transition is realized tuned by the isomerization of azobenzene. The reverse phase transition from isotropic to cholesteric and then to smectic can be recovered upon visible irradiation. The photocontrolled phase transitions in smectic liquid crystals and the corresponding changes in reflection band switched by photoisomerization of azobenzene may provide impetus for their practical application in optical memories, displays, and switches.     

Thiacalixarene Appended Azo-based Supramolecular Systems: Self-assembly and Photo Tuning Reversible Liquid Crystalline Properties

Four new azo-based supramolecular materials containing thiacalixarene core substituted by variable alkoxy groups ( TFA₁ – TFA₄ ) have been designed and synthesized for the mesomorphic and photoswitching properties. The liquid crystalline behavior were accomplished by using DSC, POM, and XRD studies. All azo-based thiacalixarene based materials with short and higher chain length display columnar hexagonal mesophase with broad temperature range. The thermal behavior of all the materials was investigated by DSC and TGA study. The structural and conformational study of the lower rim functionalized materials was confirmed by using different techniques. These thiacalixarene moulded liquid crystalline compounds shows columnar self-assembly type behavior and higher thermal stability. The introduction of bi-substituted azo-ester network towards the lower rim of thiacalixarene core has impact on the electron delocalization and liquid crystalline properties. The photoswitching properties suggested cis and trans azo-isomerization under radiation of UV light and higher thermal back relaxation time. The mesogenic behaviour of compound TFA₂ and TFA₄ were demolished by the influence of cis and trans isomerization. The structure-property correlation is studied to understand the variation in mesogenic properties with the substitution of variable alkoxy side chain.     

Towards Nematic Phases in Ionic Liquid Crystals – A Simulation Study

Ionic liquid crystals (ILCs) are soft matter materials with broad liquid crystalline phases and intrinsic electric conductivity. They typically consist of a rod-shaped mesogenic ion and a smaller spherical counter-ion. Their mesomorphic properties can be easily tuned by exchanging the counter ion. ILCs show a strong tendency to form smectic A phases due to the segregation of ionic and the non-ionic molecular segments. Nematic phases are therefore extremely rare in ILCs and the question of why nematic phases are so exceptional in existing ILCs, and how nematic ILCs might be obtained in the future is of vital interest for both the fundamental understanding and the potential applications of ILCs. Here, we present the result of a simulation study, which highlights the crucial role of the location of the ionic charge on the rod-like mesogenic ions in the phase behaviour of ILCs. We find that shifting the charge from the ends towards the centre of the mesogenic ion destabilizes the liquid crystalline state and induces a change from smectic A to nematic phases.     

First Examples of de Vries‐like Smectic A to Smectic C Phase Transitions in Ionic Liquid Crystals

In ionic liquid crystals, the orthogonal smectic A phase is the most common phase whereas the tilted smectic C phase is rather rare. We present a new study with five novel ionic liquid crystals exhibiting both a smectic A as well as the rare smectic C phase. Two of them have a phenylpyrimidine core whereas the other three are imidazolium azobenzenes. Their phase sequences and tilt angles were studied by polarizing microscopy and their temperature‐dependent layer spacing as well as their translational and orientational order parameters were studied by X‐ray diffraction. The X‐ray tilt angles derived from X‐ray studies of the layer contraction and the optically measured tilt angles of the five ionic liquid crystals were compared to obtain their de Vries character. Four of our five mesogens turned out to show de Vries‐like behavior with a layer shrinkage that is far less than that expected for conventional materials. These materials can thus be considered as the first de Vries‐type materials among ionic liquid crystals.     

Novel polymer electrolytes prepared by copolymerization of ionic liquid monomers

Ionic liquid monomer couples were prepared by the neutralization of 1‐vinylimidazole with vinylsulfonic acid or 3‐sulfopropyl acrylate. These ionic liquid monomer couples were viscous liquid at room temperature and showed low glass transition temperature (Tg) at ?83 °C and ?73 °C, respectively. These monomer couples were copolymerized to prepare ion conductive polymer matrix. Thus prepared ionic liquid copolymers had no carrier ions, and they showed very low ionic conductivity of below 10^?9 S cm^?1. Equimolar amount of lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) to imidazolium salt unit was then added to generate carrier ions in the ionic liquid copolymers. Poly(vinylimidazolium‐co‐vinylsulfonate) containing equimolar LiTFSI showed the ionic conductivity of 4 × 10^?8 S cm^?1 at 30 °C. Advanced copolymer, poly(vinylimidazolium‐co‐3‐sulfopropyl acrylate) which has flexible spacer between the anionic charge and polymer main chain, showed the ionic conductivity of about 10^?6 S cm^?1 at 30 °C, which is 100 times higher than that of copolymer without spacer. Even an excess amount of LiTFSI was added, the ionic conductivity of the copolymer kept this conductivity. This tendency is completely different from the typical polyether systems. Copyright © 2002 John Wiley & Sons, Ltd.     

Conductive networked polymer gel electrolytes composed of poly(meth)acrylate,lithium salt,and ionic liquid

Self‐standing films of (meth)acrylate‐based polymer gel electrolytes with high ionic liquid content (80 wt %) were prepared by in situ thermally or photo induced radical copolymerization of mono‐functional and di‐functional (meth)acrylates in an ionic liquid in the presence/absence of a lithium salt. Their ionic conductivity, thermal property, mechanical property, and flammability were examined. 1‐Ethyl‐3‐methylimidazolium bis(trifluoromethanesulfonyl)imide (EMImTFSI) or 1‐ethyl‐3‐methylimidazolium bis(fluorosulfonyl)imide (EMImFSI) was used as the ionic liquid, and lithium bis(trifluoromethanesulfonyl)imide LiTFSI was used as the lithium salt. The obtained films were semitransparent and flexible with good to moderate thermal stability and mechanical strength with high ionic conductivity. The EMImFSI‐containing gel electrolytes showed higher ionic conductivity than the corresponding EMImTFSI‐containing gel electrolytes. The ionic conductivity in the acrylate‐based gel electrolytes was slightly increased by addition of lithium salt, while that in the corresponding methacrylate‐based electrolytes was decreased significantly. The flame test showed the ionic liquid containing networked polymer gel electrolytes to have low if any flammability and was therefore confirmed to be highly safe. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Ionic Liquid Crystals Derived from Amino Acids

Novel chiral amino acid derived ionic liquid crystals with amine and amide moieties as spacers between the imidazolium head group and the alkyl chain were synthesised. The key step in the synthesis utilised the relatively uncommon SO₃ leaving group in a microwave‐assisted reaction. The mesomorphic properties of the mesogens were determined by differential scanning calorimetry (DSC), polarising optical microscopy (POM) and X‐ray diffraction. All liquid crystalline salts exhibit a smectic A mesophase geometry with strongly interdigitated bilayer structures. An increase of the steric bulk of the stereogenic centre hindered the formation of mesophases. In case of phenylalanine‐derived derivatives a mesomorphic behaviour was observed for shorter alkyl chains as compared to other amino acid derivatives indicating an additional stabilising effect by the phenyl moiety.     

Reinvestigation of liquid crystalline property of dimesogenic compound consisting of cholesterol and cyanobiphenyl

The dimesogenic compound consisting of cholesterol and cyanobiphenyl mesogens interlinked byω-oxyalkanoyl spacer was synthesized.The mesomorphic properties were investigated by differential scanning calorimetry(DSC),polarizing optical microscopy(POM),and X-ray diffraction(XRD).The experimental results indicated that this compound exhibited mesophase over a much wider temperature range and a new mesophase blue phase(BP).Focal conic domains(FCDs) and droplets texture to the smectic A phase(SA),oily streaks...     

Preliminary in situ X-ray diffraction measurements of UV-induced photomechanical effects in a mesogenic material

The aim of this work was to determine by X-ray diffraction the nature of the UV-induced changes in the smectic C* organization of a calamitic liquid crystalline material containing the UV-sensitive azobenzene group in the rigid core moiety. As a result of the reversible trans-cis-isomerization, a decrease of all transition temperatures (1.1°C for the SmA-SmC* transition) was observed. In the SmC* phase, this corresponds to an increase in layer spacing (up to 0.5 Å); in the SmA phase, the detected increase in layer spacing was less than a tenth of this. The increase in layer spacing is interpreted in terms of molecules in the cis- configuration expelled from the smectic layers.     

Thermal Expansion of Liquid Crystalline Polyesters Having Phenanthrene Moieties. Simultaneous DSC-XRD method

Phase transition process of polyester from phenanthrene, poly(oxyheptamethyleneoxy-2,7-phenantrenedicarbonyl), a main chain type liquid crystalline polymer, was investigated by simultaneous DSC-XRD measurements using the synchrotron radiation facility (PF). Three exothermic DSC peaks were observed during cooling from the isotropic liquid state. These DSC peaks were assigned to the transition from the isotropic liquid to the smectic A, that from the smectic A to C, and that from the smectic C to the crystalline state, respectively, as determined by XRD profiles. The rate of transition from the smectic A to C was very slow compared with the liquid crystalline transition and the crystallization. From the DSC-XRD results, the thermal expansion along c-axis in the crystal and smectic phases are 4.1×10⁻⁴ and 1.4×10⁻³ nm K⁻¹ , respectively. This revised version was published online in July 2006 with corrections to the Cover Date.     

Polymerised ionic liquid crystals bearing imidazolium and bipyridinium groups

Novel kinds of polymerised ionic liquid crystals (PILCs) bearing imidazolium and bipyridinium groups were synthesised and characterised in this work. Some bromo-polyesters were synthesised in an esterification chain reaction using 2,3-dibromosuccinyl dichloride, isophthaloyl chloride and 4,4′-biphenol. The polyester imidazolium bromides (PIBs) and polyester dipyridinium bromides (PDBs) were obtained by a quaternisation reaction between the bromo-polyesters, N-methylimidazole and 4-4′-bipyridine, respectively. The polyester imidazolium tetrafluoroborates (PITs) and polyester dipyridinium tetrafluoroborates (PDTs) were synthesised using the corresponding PIBs and PDBs in an anion-exchange reaction. The chemical structures, liquid crystalline properties and molecular weights of these polymers were characterised by multiple experimental techniques. All the PILCs including PIBs, PDBs, PITs and PDTs display smectic A phase on heating and cooling cycles. The liquid-crystalline properties of bromo-polyesters are influenced by the length of flexible spacer and composition of polyester backbones, while those of PILCs are determined by the ionic groups as additional important influent factors. In comparison with those of the mother bromo-polyesters, the d-spacing of PILCs reduced slightly due to Im⁺–Br^?, Dp⁺–Br^?, Im⁺–BF₄^? and Dp⁺–BF₄^? ion pairs in the polymer systems. Monocationic imidazolium salts display weaker interionic and intermolecular interaction, higher mobility and lower viscosity than dicationic dipyridinium salts.