Synthesis of comb‐type polycarbosilanes via nucleophilic substitution reactions on the main‐chain silicon atoms

A series of comb‐type polycarbosilanes of the type [Si(CH₃)(OR)CH₂]_n {where R = (CH₂)_mR′, R′ = ? O‐p‐biphenyl? X [X = H (m = 3, 6, 8, or 11) or CN (m = 11)], and R′ = (CF₂)₇CF₃ (m = 4)} were prepared from poly(chloromethylsilylenemethylene) by reactions with the respective hydroxy‐terminated side chains in the presence of triethylamine. The product side‐chain polymers were typically greater than 90% substituted and, for R′ = ? O‐p‐biphenyl? X derivatives, they exhibited phase transitions between 27 and 150 °C involving both crystalline and liquid‐crystalline phases. The introduction of the polar p‐CN substituent to the biphenyl mesogen resulted in a substantial increase in both the isotropization temperature and the liquid‐crystalline phase range with respect to the corresponding unsubstituted biphenyl derivative. For R = (CH₂)₁₁? O‐biphenyl side chains, an analogous side‐chain liquid‐crystalline (SCLC) polysiloxane derivative of the type [Si(CH₃)(O(CH₂)₁₁? O‐biphenyl)O]_n was prepared by means of a catalytic dehydrogenation reaction. In contrast to the polycarbosilane bearing the same side chain, this polymer did not exhibit any liquid‐crystalline phases but melted directly from a crystalline phase to an isotropic liquid at 94 °C. Similar behavior was observed for the polycarbosilane with a fluorocarbon chain, for which a single transition from a crystalline phase to an isotropic liquid was observed at ?0.7 °C. The molecular structures of these polymers were characterized by means of gel permeation chromatography and high‐resolution NMR studies, and the crystalline and liquid‐crystalline phases of the SCLC polymers were identified by differential scanning calorimetry, polarized optical microscopy, and X‐ray diffraction. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 984–997, 2003     

Effect of molecular structure on mesomorphism XXI. Monodisperse tetrameric model compounds for liquid crystalline polymers

Abstract

Twinned dimeric mesogens having a rigid-flexible-rigid molecular structure have been shown to be appropriate models for some properties of regularly alternating (rigid-flexible)_n main chain liquid crystalline polymers (lcps). A family of tetrameric monodisperse liquid crystalline model compounds chemically related to known main chain liquid crystalline polymers of the 4-alkoxyphenyl 4′-alkoxy-benzoate type has been synthesized. The tetramers are nematogenic. Alternations in thermodynamic parameters (ΔH, ΔS) for the N-I transition as a function of spacer chain length indicate conformational behaviour of the internal spacers dominates mesophase properties.     

Side chain type ionic liquid crystalline polymers having high Preliminary communication molecular weight

Side chain type ionic liquid crystalline polymers having a 4-(1,3-dioxan-2-yl)pyridinium structure in their mesogenic side chain were synthesized. These polymers exhibited the smectic A phase. The molecular weights of these ionic liquid crystalline polymers are very high, e.g. for compound 7 - 2 M_w = 486 000.     

Thermotropic main chain liquid crystalline polyesters containing ferrocene and phosphate units: synthesis and characterization

A new series of liquid crystalline main chain copolyesters were prepared, having ferrocene in the mesogenic segment and a methyl phosphate group along with a methylene spacer. The even numbered methylene groups were varied from two to ten. Liquid crystalline behaviour was investigated on a hot stage optical polarized microscope. Thermal properties of the polymers were analysed by TGA and DSC, revealing that the polymers yield high char products, probably caused by the formation of phosphorus and iron oxides. The glass transition (T _g) temperatures of the polymers were found to be fairly low, the result of the incorporation of bulky phosphorus and ferrocene moieties in the chain. The phase behaviour was analysed and correlated with the structure of the polymers. The liquid crystalline textures of the polymers became more transparent with increasing spacer length. Energy minimized structures for the polymer repeating units reveal that both the ferrocene and phosphorus moieties produce more molecular entanglement, thus reducing the T _g and T _m of the polymers.     

Synthesis and characterization of main chain liquid crystalline ionomers containing sulphonate groups

A series of main chain liquid crystalline ionomers containing sulphonate groups pendent to the polymer backbone were synthesized by an interfacial condensation reaction of 4,4′‐bis(1,10‐sebacyloxo)benzoic acid, brilliant yellow (BY), and 4,4′‐biphenyldiol. 4,4′‐Bis(1,10‐sebacyloxo)benzoic acid exhibited nematic schlieren texture during heating and cooling. The ionomers are thermotropic liquid crystalline polymers and thermally stable to about 270°C. They exhibit broad mesophase regions over a range of 220°C and the same nematic mesomogen with a colourful thread texture as B₀‐LCP, which implies that the introduction of an ionic group did not change the texture of the B₀‐LCP. However, the thermotropic liquid crystalline properties were somewhat weakened when the concentration of BY was more than 5%. The inherent viscosity in N,N‐dimethylformamide solution suggested that intermolecular associations of sulphonate groups occurred at low concentration, and intermolecular associations predominated at higher concentration.     

Synthesis and characterisation of polymethacrylates containing para-, meta- and ortho-monosubstituted azobenzene moieties in the side chain

Three sets of novel side-chain liquid crystalline polymers with monosubstituted azobenzene moieties in the side-chain have been studied. These are poly(p-(4′-methoxy-4-oxyhexyloxy azobenzene) benzyl methacrylate) (PPHABM), poly(m-(4′-methoxy-4-oxyhexyloxy azobenzene) benzyl methacrylate) (PMHABM) and poly(o-(4′-methoxy-4-oxyhexyloxy azobenzene) benzyl methacrylate) (POHABM). The chemical structure of the monomers was confirmed by ¹H NMR, ¹³C NMR spectroscopy and elemental analysis. The structural characterisation of the polymers was performed by ¹H NMR spectroscopy and gel permeation chromatography, and their phase behaviour and liquid crystalline properties were studied using differential scanning calorimetry, polarised optical microscopy and wide-angle X-ray diffraction. The results show that the transitional behaviour of side-chain liquid crystalline polymers containing monosubstituted azobenzene moieties depends strongly on the position of the substituent on the azobenzene moiety; for example, the ortho-monosubstituted polymers do not form liquid crystalline phases, but all the para- and meta-monosubstituted polymers exhibit a smectic A phase. Furthermore, the glass transition temperature (T_g ) of the polymers decreases in the order, para > meta > ortho. For the PPHABM and PMHABM polymers the isotropic temperature (T_i ) and liquid crystalline range (ΔT, from T_g to T_i ) are found to be in the order, para > meta, although it is surprising that the associated enthalpy changes in these polymers is the opposite order, meta > para.     

Synthesis of ionic polymers by free radical polymerization using aprotic trimethylsilylmethyl-substituted monomers

Aprotic ionic polymers containing trimethylsilylmethyl-substituted imidazolium structures are synthesized using free radical polymerization of monomers comprising a vinyl group either at the cation or at the anion. Bulk polymerization is used for the room temperature ionic liquid monomer 1-trimethylsilylmethyl-3-vinylimidazolium bis(trifluoromethylsulfonyl)imide. In contrast to this, solution polymerization is applied for 1-trimethylsilylmethyl-3-methylimidazolium p-styrene sulfonate because this monomer undergoes self-polymerization during melting at a higher temperature than selected for bulk polymerization. Glass transition temperature (T _g) of the ionic polymers and intrinsic viscosity measurements indicate differences between these polymers, which are composed either of a polycation with a trimethylsilylmethyl substituent at each vinylimidazolium segment of the polymer chain and mobile bis(trifluoromethylsulfonyl)imide (NTf₂⁻) anions or a polyanion containing p-styrene sulfonate segments and mobile 1-trimethylsilylmethyl-3-methylimidazolium cations. The new aprotic ionic polymers containing trimethylsilylmethyl substituents may be interesting for application in adhesive, interlayer and membrane manufacturing.     

SYNTHESIS AND PROPERTIES OF METAL COMPLEXES OF β-DIKETONE BASED SIDE CHAIN LIQUID CRYSTAL POLYSILOXANE

A new type of metal coordinated liquid crystalline polymers has been synthesized by complexation of metal ions with β-diketone based side chain liquid crystal polysiloxane (DKLCP). The complexation of copper ions with DKLCP greatly increases the phase transition temperature T_k from crystalline state to liquid crystalline state and T_(cl) from LC to isotropic state and makes the range of phase transition ΔT (ΔT=T_(cl)-T_k) widened. These complexes are soluble in common organic solvents. However, the incorporation of europium ions into DKLCP molecules gives rise to reduction in liquid crystallinity and crosslinking in some cases. The DKLCP coordinated with suitable amount of Eu ions can show good liquid crystallinity and fluorescent property.     

Vinyl‐terminated side‐chain liquid‐crystalline polyethers containing mesogenic benzylideneaniline moieties

The synthesis of two vinyl‐terminated side‐chain liquid‐crystalline polyethers containing benzylideneaniline moieties as mesogenic cores was approached in two different ways: by chemically modifying poly(epichlorohydrin) with suitable mesogenic acids or by polymerizing analogous glycidyl ester or glycidyl ether derivatives. In all the conditions tested, the first approach led to materials in which the imine group was hydrolyzed. The second approach led to the desired polymers PG2a and PG2b , but only from the glycidyl ether derivatives and when the initiator was the system that combined polyiminophosphazene base t‐Bu‐P₄ and 3,5‐di‐t‐butylphenol. These polymers were chemically characterized by IR and ¹H and ¹³C NMR spectroscopies. The estimated degrees of polymerization ranged from 30 to 36. The liquid crystalline behavior of the synthesized polymers was studied by differential scanning calorimetry, polarized optical microscopy (POM) and X‐ray diffraction. Both polymers behave like liquid crystals and exhibited a single mesophase, which was recognized as a smectic C mesophase, probably with a bilayer arrangement, i.e., a smectic C₂ mesophase. The crosslinking of both polymers was performed with dicumyl peroxide as initiator, which led to liquid crystalline thermosets. POM and X‐ray diffraction confirmed that the mesophase organization mantained on the crosslinked materials. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1877–1889, 2006     

Novel thermotropic liquid crystalline‐cum‐photocrosslinkable polyvanillylidene alkyl/arylphosphate esters

A new class of linear unsaturated polyphosphate esters based on divanillylidene cyclohexanone possessing liquid crystalline‐cum‐photocrosslinkable properties have been synthesized from 2,6‐bis[n‐hydroxyalkyloxy(vanillylidene)]cyclohexanone [n = 6,8,10] with various alkyl/aryl phosphorodichloridates in chloroform at ambient temperature. The resultant polymers were characterized by intrinsic viscosity, FT‐IR, ¹H, ¹³C, and ³¹P‐NMR spectroscopy. All the polymers showed anisotropic behavior under hot stage optical polarized microscope (HOPM). The liquid crystalline textures of the polymers became more transparent with increasing spacer length. The thermal behavior of the polymers was studied by thermogravimetric analysis and differential scanning calorimetry. The T_g, T_m, and T_i of the polymers decreased with increasing flexible methylene chain. The photocrosslinking property of the polymer was investigated by UV light/UV spectroscopy; the crosslinking proceeds via 2π‐2π cycloaddition reactions of the divanillylidene exocyclic double bond of the polymer backbone. The pendant alkyloxy containing polymers show faster crosslinking than the pendant phenyloxy containing polymers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5215–5226, 2004     

Ionic conductivity probed in main chain liquid crystalline azobenzene polyesters

Three main chain thermotropic liquid crystalline (LC) azobenzene polymers were synthesized using the azobenzene twin molecule (P4P) having the structure Phenylazobenzene‐tetraethyleneglycol‐Phenylazobenzene as the AA monomer and diols like diethylene glycol, tetraethylene glycol (TEG), and hexaethylene glycol as the BB comonomer. Terminal ? C(O)OMe units on P4P facilitated transesterification with diols to form polyesters. All polymers exhibited stable smectic mesophases. One of the polymers, Poly(P4PTEG) was chosen to prepare composite polymer electrolytes with LiCF₃SO₃ and ionic conductivity was measured by ac impedance spectroscopy. The polymer/0.3 Li salt complex exhibited a maximum ionic conductivity in the range of 10^?5 S cm^?1 at room temperature (25 °C), which increased to 10^?4 S cm^?1 above 65 °C. The temperature dependence of ionic conductivity was compared with the phase transitions occurring in the sample and it was observed that the glass transition had a higher influence on the ionic conductivity compared to the ordered LC phase. Reversible ionic conductivity switching was observed upon irradiation of the polymer/0.3 Li salt complex with alternate UV and visible irradiation. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 629–641     

Mesophase formation and thermal behavior of catanionic mixtures of gemini surfactants with sodium alkylsulfates

The thermal behavior for three homologous series of cationic geminis surfactants of the type n-2-n, alkanediyl-α,ω-bis(alkyldimethylammonium bromide), with n = 12, 14, 16, and 18, and sodium alkyl sulfates, SC _m S, with m = 12, 14, and 16, is reported here. The cationic/anionic molar ratio is kept at 1:2 (equicharged mixtures), and salt is also present. Polarizing light microscopy and differential scanning calorimetry show a stepwise fusion for the mixtures with appearance of several mesophases between the crystalline structures and the isotropic liquid. A main endothermic transition is observed, associated with partial chain melting and consequent loss of crystalline order, followed by a transition to a smectic liquid crystal. The phase transition thermodynamics is interpreted in terms of an interplay between van der Waals chain–chain interactions and ionic head group interactions.     

New side chain ferroelectric liquid crystalline polymers based on (2S, 3S)-2-chloro-3-methylpentanoic acid: synthesis and phase behaviour

The synthesis of four new chiral mesogenic monomers (M₁–M₄) and side chain ferroelectric liquid crystalline polymers containing (2S, 3S)-2-chloro-3-methylpentanoate is described. The chemical structures and phase behaviour of the monomers and polymers obtained in this study were characterised by Fourier transform infrared, proton nuclear magnetic resonance, polarising optical microscopy, differential scanning calorimetry, thermogravimetric analysis and X-ray diffraction. The selective reflection of light was investigated with ultraviolet/visible (UV/Vis). Their structure–mesomorphism relationships were discussed. M₁ and P₁ all showed a chiral smectic C (SmC*) phase. M₂ and M₃ revealed a SmC* phase and cholesteric phase, while their corresponding polymers P₂ and P₃ revealed a SmC* phase and smectic A (SmA) phase. M₄ only exhibited a cholesteric phase, whereas the corresponding polymers P₄ showed a SmA phase. Moreover, the selective reflection of light shifted to the long-wavelength region at the SmC* phase range and to the short-wavelength region at the cholesteric range with increasing temperature, respectively. The results seemed to demonstrate that the tendency towards melting temperature (T_m), glass transition temperature (T_g), isotropic temperature (T_i) and mesophase range for the monomers and polymers increased by increasing the mesogenic core rigidity or the number of phenyl ring. The polymerisation effect could lead to higher liquid crystalline to isotropic phase transition temperature, wider mesophase range and more ordered smectic phase formed. In addition, all the obtained polymers had a very good thermal stability and the corresponding T_d increased by increasing the number of phenyl ring.     

Side chain liquid crystalline composites,occurrence of interdigitated bilayer smectic C phases

We report on the results of X-ray investigations in two series of polymer monomer composites, PM6Rm-33 and PMnR12-33, which consist of mixtures of achiral liquid crystalline side chain polymers and their monomers. These mixtures present a unique integration of monomer in the polymeric base which assists in modifying their properties and forming homogenous composites. X-ray measurements for all the investigated composites indicate the existence of bilayered smectic C phases (SmC₂). In several composites, the interlayer distance of the SmC₂ phase abnormally increases with cooling; this is associated with the aliphatic interdigitation at the tail-to-tail interface being more prominent when longer aliphatic tails are present.     

Influence of alkoxy tail length and unbalanced mesogenic core on phase behavior of mesogen‐jacketed liquid crystalline polymers

When the flexible terminal substituent changes from butoxy to hexyloxy or longer, smectic C (S_C) liquid crystalline phase was firstly reported to develop from a kind of mesogen‐jacketed liquid crystalline polymer (MJLCP) whose mesogenic side groups are unbalancedly bonded to the main chain without spacers. A series of MJLCPs, poly[4,4′‐bis(4‐alkoxyphenyl)‐2‐vinylbiphenyl(carboxide)] (nC2Vp, n is the number of the carbons in the alkoxy groups, n = 2, 4, 6, 8, 10, and 12) were designed and synthesized successfully via free radical polymerization. The molecular weights of the polymers were characterized with gel permeation chromatography, and the liquid crystalline properties were investigated by differential scanning calorimetry, polarized light microscopy experiments, and 1D, 2D wide‐angle X‐ray diffraction. Comparing with the butoxy analog, the polymer with unbalanced mesogenic core and shorter flexible substituents (n = 2, 4) keeps the same smectic A (S_A) phase, but other polymers with longer terminal flexible substituents (n = 6, 8, 10, and 12) can develop into a well‐defined S_C phase instead of S_A phase. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 505–514, 2009     

Synthesis and mesomorphic properties and optical behaviour analysis of homologous series azobenzene liquid crystal monomer with polar substituents

ABSTRACT

Twenty novel azobenzene liquid crystal micromolecular compounds named ω-[4-(p-substituted azobenzeneoxy carbonyl]acid (X-ABCnA) have been designed and synthesised, followed by studies on the thermal performance and mesomorphic properties of the compounds. The liquid crystal compounds were divided into five homologous series based on the terminal substituents R (R = CH₃O, CH₃, H, Cl, NO₂). In each series, the number of carbons on flexible chain was 4, 6, 8 and 10, respectively. Fourier-transform infrared, proton nuclear magnetic resonance and elementary analysis demonstrated that the structure of the synthesised azobenzene liquid crystal compounds was consistent with the molecular design. The mesomorphic properties were tested, analysed and characterised by using differential scanning calorimetry and polarised optical microscopy. The melting transition (T _m) of all the compounds in homologous series with different substituents appeared to decrease with the increase of carbon numbers on flexible chains. The same held true for the temperature of isotropic-mesophase/crystalline transition. The compounds with stronger polarity of terminal substituents were more likely to form broader mesogenic ranges. The liquid crystal compounds discussed in this work can be regarded as a reference for the synthesis of mesogenic arms participating in the synthesis of novel multi-arm liquid crystalline macromolecules and polymers.     

Influence of alkyl tail length on self-organisation of side-chain liquid crystalline polymers with biphenyl hemiphasmidic mesogens

A new and simple series of side-chain liquid crystalline polymethacrylates containing biphenyl hemiphasmidic mesogens based on 4-[(3,4,5-trialkan)-1-carbonylbenzoate]biphenyl (denoted as PT_mBMA, m = 6, 8, 10, 12, 14, 16, 18, m refers to the carbon number of alkoxy tails) groups was designed and successfully synthesised via free radical polymerisation. The phase structures and transitions of the polymers were investigated by the combination of techniques including differential scanning calorimetry, polarizing microscope, one-dimensional/two-dimensional wide-angle X-ray diffraction, and small-angle X-ray scattering. The experimental results revealed that the liquid crystalline phase structures and behaviours of the polymers were found to be strongly dependent on the alkyl tail length (m). When m = 6, the PT_mBMA formed a stable smectic phase above T_g. When m = 8, 10, 12, 14, 16, 18, the sample presented a hexagonal columnar mesophase (Φ_h), suggesting that the alkyl length has played an important role in the phase behaviours of hemiphasmidic side-chain liquid crystalline polymers.     

Light scattering from a nematic monodomain in an electric field Twist elastic constant and viscosity coefficient of nematic polymer–solvent mixtures

Abstract

The light scattering technique was used to investigate the viscoelastic parameters characterizing director twist distortions in miscible nematic mixtures of 5CB (pentacyanobiphenyl) with two side chain liquid crystal polymers and a main chain liquid crystal polymer. By applying an AC electric field to homeotropically-aligned nematic monodomains of the mixtures, the field-dependent scattering intensities and director orientation fluctuation relaxation rates yield, respectively, the twist elastic constant K ₂₂ and viscosity coefficient γ₁. The results directly demonstrate that the addition of liquid crystal polymers causes substantial decreases of the relaxation rates for dynamic light scattering from the twist mode and these changes are due to small decreases in K ₂₂ coupled with large increases in γ₁. The decrements in K ₂₂ are comparable for both side chain and main chain liquid crystal polymers. The relative increase in the twist viscosity for the side chain liquid crystal polymers is much smaller than those of main chain polymers. A theoretical model is used to qualitatively interpret the difference between the viscous behaviour of the twist mode for both side chain and main chain liquid crystal polymers in a nematic solvent.     

液晶离聚物--分子设计与热性能

综述了液晶离聚物的分子设计与液晶热性能的关系,一般主链液晶,离子在链中浓度增加,玻璃化温度（Ｔｇ）和熔点（Ｔｍ）下降,离子在端基,对Ｔｇ和Ｔｍ影响不大;离子对侧链淮晶的影响,取决于主链的柔顺性和离子在链中的位置等。一般情况下,无论对主链还是侧链液晶离聚物,随着离子在链中浓度增加,液晶相向各向同性液体转化温度（Ｔｉ）降低。     

Studies on thermotropic liquid crystalline elastomers. II. Synthesis and properties of liquid crystalline polyester elastomers

Three series of novel thermotropic liquid crystalline polyester elastomers (TLCPEEs) were prepared by direct polycondensation from terephthalic acid, polyols (M_n = 1000 or 2000), and various diols. The structures and thermal properties of the synthesized TLCPEEs were examined by FTIR spectroscopy, differential scanning calorimetry, thermal optical polarized microscopy, thermogravimetric analysis, and wide-angle x-ray diffraction. The effects of kinds and amount of diols and the molecular weight of polyols on the thermal properties of TLCPEEs were studied. By introducing long flexible spacers (PE-1000 or PE-2000) into the polymer main chain, all polymers showed two-phase morphology under the thermal optical microscopic observation. All of the synthesized polymers, except polymer P1-BPA60 and P2-BPA60, which were prepared from BPA, exhibited thermotropic liquid crystalline properties that were in the smectic phase. © 1995 John Wiley & Sons, Inc.