A Three-Step Model for Submicron W/O Emulsion Formation in a Transitional-Phase Inversion Process

A three-step model of the transitional phase inversion (TPI) process for the formation of water-in-oil (W/O) emulsions is presented. Three types of emulsions exist in an emulsification process at different oil–water ratios and hydrophilic–lipophilic balance (HLB). A stable W/O emulsion was obtained using Sorbitan oleate (Span 80) and polyoxyethylenesorbitan monooleate (Tween 80) with a specified HLB and oil volume fraction. Oil was added into water, which contained the water-soluble surfactant, to dissolve the oil-soluble surfactant. This route allowed TPI to occur, and an interesting emulsification process was observed by varying the HLB, which corresponded to the change in the oil–water ratio. Two types of emulsions in the emulsification process were found: transition emulsion 1 (W/O/W high internal phase emulsion) and target emulsion 2 (W/O emulsion with low viscosity). This study describes the changes that occurred in the emulsification process.     

Influence of synthetic perfumes on stability of O/W emulsion in sodium dodecyl sulfate–n-dodecane–water ternary systems

Influence of synthetic perfumes having diverse chemical structures such as eugenol, linalool, benzyl acetate, α-ionone, α-hexylcinnamaldehyde, and d-limonene on stability of oil-in-water (O/W) emulsion composed of sodium dodecyl sulfate, n-dodecane, and water is investigated. Turbidity measurements of the O/W emulsion indicate that the emulsion is stabilized by adding the synthetic perfume, except for d-limonene, and that this tendency is remarkable in adding eugenol. The addition of the perfume, especially eugenol, shrinks oil droplets in the O/W emulsion, which inhibits coagulation and/or creaming of oil droplets. When adding eugenol, moreover, ζ-potential of oil droplets increases negatively, and viscosity of the external water phase of the emulsion rises drastically. The increment in ζ-potential and viscosity by the addition of eugenol also prevents oil droplets from coagulation and/or creaming and makes the O/W emulsion still more stable.     

Emulsion preparation using beta-cyclodextrin and its derivatives acting as an emulsifier

The preparation and formation mechanism of n-hexadecane/water emulsions using natural beta-cyclodextrin (beta-CD) and chemically modified beta-CDs (triacylated beta-cyclodextrins) as an emulsifier were investigated. The stable water/oil (W/O) emulsion was formed using tripropanoyl-beta-CD (TP-beta-CD). From observation using the contact angle (theta(ow)) of precipitates derived from CD, it was clarified that oil/water (O/W) emulsion at theta(ow)<90 degrees and (W/O) emulsion at theta(ow)>90 degrees are formed when the composition of each oil and water was mixed with natural beta-CD or triacylated beta-CDs.     

A review of: “Nineteenth Century Attitudes: Men of Science (Chemists and Chemistry Series,Vol. 13)”. Sydney Ross. Kluwer Academic Publishers; Dordrecht, 1991. pp. xi+235. $69.00.

Abstract

The potential of polytetrafluoroethylene (PTFE) membranes as water‐in‐oil (W/O) emulsification devices was investigated to obtain uniformly sized droplets and to convert them into microcapsules and polymer particles via subsequent treatments. Uniform W/O emulsion droplets have not been achieved using glass membranes unless the membrane was rendered hydrophobic by treatment with silanes. If a PTFE membrane is capable of providing uniform droplets for a W/O emulsion, a coordinated membrane emulsification system can be established since glass membranes have been so successful for O/W (oil‐in‐water) emulsification. In order to examine the feasibility of PTFE membrane emulsification, O/W and W/O emulsion characteristics prepared using PTFE membranes were compared with those prepared by the conventional SPG (Shirasu porous glass) membrane emulsification method. A 3 wt.% sodium chloride solution was dispersed in kerosene using a low HLB surfactant. Effects of the membrane pore size, permeation pressure, and the type of emulsifiers and concentration on the droplet size and on the size distribution (CV, coefficient of variation) were investigated. The CV of the droplets was fairly low, and the average droplet size was correlated with the critical permeation pressure of the dispersed phase, revealing that the PTFE membrane could be used as a one‐pass membrane emulsification device. Low CV values were maintained with a Span 85 (HLB = 1.8) concentration, 0.2–5.0 wt.% and a range of HLB from 1.8–5.0. For a brief demonstration of practical applications, nylon‐6,10 microcapsules prepared by interfacial polycondensation and poly(acrylamide) hydrogels from inverse suspension polymerization are illustrated.     

Preparation of porous/hollow particles of phenolic resin

Porous/hollow polymer microparticles were prepared by suspension polymerization from a resol, water‐soluble phenolic resin in a multiple emulsion system oil‐in‐water‐in‐oil(O/W/O). The porous/hollow structures of phenolic resin microparticle were characterized by optical microscopy (OM) and scanning electron microscopy (SEM). It is shown that the porous/hollow structure is related to a dispersion and curing process of the resol resin. It was indicated that it is low‐cost and simple to prepare porous/hollow phenolic resin micr‐particles from resol in an O/W/O system. Copyright © 2007 John Wiley & Sons, Ltd.     

Fabrication of macroporous foam and microspheres of polystyrene by Pickering emulsion polymerization

Poly(styrene-co-methacrylic acid) (PS-co-MAA) particles were synthesized via surfactant-free emulsion polymerization and then used as particulate emulsifiers for preparation of Pickering emulsions. Our results showed that adjusting the solution pH can tune the wettability of PS-co-MAA particles to stabilize either water-in-oil (W/O) or oil-in-water (O/W) Pickering emulsions. Stable W/O emulsions were obtained with PS-co-MAA particles at low pH values due to their better affinity to the dispersed oil phase. In contrast, increasing the pH value significantly changed the stabilizing behavior of the PS-co-MAA particles, leading to the phase inversion and formation of stable O/W emulsions. We found that the oil/water ratio had a significant influence on pH value of the phase inversion. It decreased with decreasing the oil/water ratio, and no phase inversion occurred when the styrene volume fraction reduced to 10 %. Additionally, macroporous polystyrene (PS) foam and PS microspheres were obtained via polymerization of Pickering high internal phase emulsion (Pickering HIPE) and O/W Pickering emulsion, respectively.     

Dynamic Stability of Heavy Crude Oil-in-Water Emulsions

The transport of heavy oil as concentrated oil-in-water (O/W) emulsions is one of the most promising pipeline techniques, and how to ensure a steady flow is the key to the successful application of this technology. Most of the previous studies focused on the static stability of the emulsions. However, the stability changes constantly with time and external shearing in the transportation. In this paper, a stable O/W emulsion was prepared for its dynamic stability to be tested by three methods of small-scale flow loop, rheology and stirring, respectively. The results indicated that the O/W emulsion with 30 vol.% water and 0.2 wt.% OP-10 could well satisfy the transport requirement. A critical temperature existed to make the rheological property of the emulsion rapidly deteriorate. For low-Reynolds-number turbulent pipe flow, an appropriate increase of temperatures and shear rates was conducive to the flocculation-dissociation balance of the internal phase, which could effectively reduce the apparent viscosity of the emulsion and the flow frictional resistance. High flow rate of O/W emulsions could be transported at relatively low temperatures to ensure great dynamic stability, and low flow rate of that could be done at relatively high temperatures to obtain low apparent viscosity.     

Preparation characteristics of water-in-oil-in-water multiple emulsions using microchannel emulsification

Microchannel (MC) emulsification is a novel technique for preparing monodispersed emulsions. This study demonstrates preparing water-in-oil-in-water (W/O/W) emulsions using MC emulsification. The W/O/W emulsions were prepared by a two-step emulsification process employing MC emulsification as the second step. We investigated the behavior of internal water droplets penetrating the MCs. Using decane, ethyl oleate, and medium-chain triglyceride (MCT) as oil phases, we observed successful MC emulsification and prepared monodispersed oil droplets that contained small water droplets. MC emulsification was possible using triolein as the oil phase, but polydispersed oil droplets were formed from some of the channels. No leakage of the internal water phase was observed during the MC emulsification process. The internal water droplets penetrated the MC without disruption, even though the internal water droplets were larger than the resulting W/O/W emulsion droplets. The W/O/W emulsion entrapment yield was measured fluorometrically and found to be 91%. The mild action of droplet formation based on spontaneous transformation led to a high entrapment yield during MC emulsification.     

Phase inversion of the Pickering emulsions stabilized by plate-shaped clay particles

We investigated the phase inversion of Pickering emulsions stabilized by plate-shaped clay particles. Addition of water induced a phase inversion from a water-in-oil (W/O) emulsion to an oil-in-water (O/W) emulsion when the amount of the oil phase exceeded a limiting amount of oil absorption to solid particles. On the other hand, a phase inversion from a powdery state to an O/W emulsion state through an oil-separated state is observed when the amount of an oil phase is less than the limiting amount of the oil absorption. Interestingly, the oil separated is re-dispersed as emulsion droplets into the O/W emulsion phase. This type of phase inversion, which is a feature of the Pickering emulsions stabilized by the clay particles, is caused by a change in the aggregate structures of particles.     

FORMATION OF MULTIPLE EMULSIONS IN A FOUR-COMPONENT SYSTEM CONTAINING NONIONIC SURFACTANTS

ABSTRACT

W/O/W and O/W/O multiple emulsions have been found in systems consisting of water, light mineral oil, and two nonionic surfactants (Span 80 and Tween 20).No specific order of addition of the components or pre-mixing was followed. Following gentle agitation at 25°, 35° and 45° for 48?hours, W/O/W emulsions were found at water contents above 30%, while 0/W/O emulsions generally appeared below 60% water.W/0 and 0/W emulsions, micellar phases and liquid crystalline phases were also observed at various compositions. The multiple emulsion regions decreased in size as temperature increased and the areas and positions of the other phases were also temperature dependent.     

Fat crystals: A tool to inhibit molecular transport in W/O/W double emulsions

Water-in-oil-in-water (W/O/W) double emulsions are a promising technology for encapsulation applications of water soluble compounds with respect to functional food systems. Yet molecular transport through the oil phase is a well-known problem for liquid oil-based double emulsions. The influence of network crystallization in the oil phase of W/O/W globules was evaluated by NMR and laser light scattering experiments on both a liquid oil-based double emulsion and a solid fat-based double emulsion. Water transport was assessed by low-resolution NMR diffusometry and by an osmotically induced swelling or shrinking experiment, whereas manganese ion permeation was followed by means of T₂-relaxometry. The solid fat-based W/O/W globules contained a crystal network with about 80% solid fat. This W/O/W emulsion showed a reduced molecular water exchange and a slower manganese ion influx in the considered time frame, whereas its globule size remained stable under the applied osmotic gradients. The reduced permeability of the oil phase is assumed to be caused by the increased tortuosity of the diffusive path imposed by the crystal network. This solid network also provided mechanical strength to the W/O/W globules to counteract the applied osmotic forces.     

Phase Transitions in Emulsions Formed by Aqueous Emulsifier and its Action on Improving Mobility in Oil Recovery

Transition from oil-in-water (O/W) emulsions to water-in-oil (W/O) emulsions and its action on enhanced oil recovery was investigated by viscosity, morphology, and simulated flooding experiments. This transition can be realized by increasing the volume ratio of oil to water or decreasing the emulsifier concentration. At a mass concentration of 0.3 wt%, the self-developed emulsifier FJ-1 mainly forms O/W emulsions at a volume ratio (oil to water) of 1:1. The emulsions behave as O/W emulsions with a low viscosity when the volume ratio of oil to water is below 2:1. Above 2:1, increasing volume ratio leads to the O/W emulsions transferring into W/O emulsions with high viscosity. For example, at a volume fraction of 4:1, the viscosity of W/O emulsions reaches 229.1 mPa · s, and separated water can hardly be detected. Transition from O/W emulsions to W/O emulsions with high viscosity can also be realized by decreasing the concentration of emulsifier to 0.05 wt% or lower at a volume ratio of 1:1. These may be the critical factors leading to transition from O/W emulsions to W/O emulsions at core conditions. Simulated flooding experiments show that emulsifier fluids can act as an in situ mobility improver and make an improvement of oil recovery even by 20.4%. The results indicate that the water-in-crude-oil emulsions possess great potential in enhancing oil recovery.     

Stabilization of Water‐Soluble Antioxidant in Water‐in‐Oil‐in‐Water Double Emulsions

Abstract

In this study, we are introducing a method that can effectively stabilize antioxidants in water‐in‐oil‐in‐water (W/O/W) double emulsions. Preliminarily, stable W/O/W double emulsions were produced by manipulating the characteristics of internal aqueous phase via two‐stage emulsification, resulting consequently in the formation of fine internal water droplets in the dispersed oil droplets. From conductivity measurements that can determine the elution amount of internal aqueous phase, it was confirmed that the double emulsion stability could be improved by treating the internal aqueous phase with a hydroxypropyl‐beta‐cyclodextrin. In this study, kojic acid, 5‐hydroxy‐2‐(hydroxymethyl)‐4‐pyrone was selected as a model antioxidant. The stabilization of kojic acid was attempted by locating it in the internal water droplets of the stable W/O/W double emulsions. The stability of kojic acid in the double emulsion system could be maintained at 90% for 10 weeks at high temperature. We believe that these stable W/O/W double emulsions could be used meaningfully as a carrier for many unstable antioxidants.     

Cinnamoyl Alginate Microspheres: Effect of UV-Treatment on Release of FITC-Dextran

Cinnamoyl alginate microspheres were prepared using the water droplets of W/O emulsions as a template. Cinnamoyl alginates having variable content of the cinnamoyl group were prepared by a condensation reaction. The photo-dimerization degree of the cinnamoyl group increased as the molar ratio of pyranose unit/cinnamoyl group increased from 1:0.043 to 1:0.18. The air/water interfacial activity of cinnamoyl alginate also increased with increasing the molar ratio. Aqueous solution of cinnamoyl alginate was dispersed in mineral oil to obtain W/O emulsion. UV light (254 nm, 6 W) was irradiated to the emulsion to dimerize the cinnamoyl groups, and CaCl₂ was added to the emulsion to cross-link the cinnamoyl alginate. The surface of UV-treated microspheres was rougher than that of UV-untreated microspheres, possibly due to the photo-dimerization-induced tension on the alginate chains. The release degrees for 24 hours of fluorescein isothiocyanate-dextran (FITC-dextran; MW 4000) from UV-treated microspheres were markedly higher than those from UV-untreated ones. This is possibly due to the intramolecular dimerization of cinnamoyl group. The UV irradiation-induced percentage increase in the maximum release degree was greater as the content of cinnamoyl group was higher.     

Simultaneous conductivity and viscosity measurements as a technique to track emulsion inversion by the phase-inversion-temperature method

Two kinds of transitions can occur when an emulsified water-oil-ethoxylated nonionic surfactant system is cooled under constant stirring. At a water-oil ratio close to unity, a transitional inversion takes place from a water-in-oil (W/O) to an oil-in-water (O/W) morphology according to the so-called phase-inversion-temperature method. At a high water content, a multiple w/O/W emulsion changes to a simple O/W emulsion. The continuous monitoring of both the emulsion conductivity and viscosity allows the identification of several phenomena that take place during the temperature decrease. In all cases, a viscosity maximum is found on each side of the three-phase behavior temperature interval and correlates with the attainment of extremely fine emulsions, where the best compromise between a low-tension and a not-too-unstable emulsion is reached. The studied system contains Polysorbate 85, a light alkane cut oil, and a sodium chloride brine. All transitions are interpreted in the framework of the formulation-composition bidimensional map.     

Some experiments on complex spontaneous emulsification in the system water–benzene–ethanol

The system water–benzene–ethanol was used to illustrate the complexity of spontaneous emulsification, when water-poor emulsions are brought in contact with water. In the first case, an O/W emulsion located close to the plait point in the system was used. The aqueous phase in the emulsion was incompatible with water, and a strong spontaneous emulsification to an O/W between the two liquids took place in the water layer close to the interface between layers. In the second case, a W/O emulsion, also close to the plait point, was brought in contact with water. Now, the spontaneous emulsification between the water and the oil phase of the original emulsion to an O/W emulsion also took place in the water layer forming a distinct emulsion layer beneath the interface.     

Synchrotron radiation macrobeam and microbeam X-ray diffraction studies of interfacial crystallization of fats in water-in-oil emulsions

Using macrobeam and microbeam techniques, we performed synchrotron radiation X-ray diffraction (SR-XRD) analyses of fat crystallization in water-in-oil (W/O) emulsion, in combination with DSC and polarized optical microscopic observation. Particular focus was on the crystallization of the fats around water droplets in the W/O emulsion systems using food emulsifiers of polyglycerol polyricinoleate (PGPR) alone (PGPR emulsion), and PGPR and monobehenoylglycerol (MB) (PGPR+MB emulsion). We obtained the following results: (1) macrobeam SR-XRD confirmed that adding MB promoted fat crystallization during cooling, (2) microbeam SR-XRD indicated that the lamellar planes of fat crystals near the water and oil interfaces are arranged almost parallel to the interface planes in both PGPR emulsion and PGPR+MB emulsion, and (3) adding MB resulted in the formation of tiny fat crystals because it promoted crystallization, which occurred both in the bulk oil phase and at the W/O interfaces. The present study is the first to apply microbeam SR-XRD to observe the microscopic features of fat crystallization in W/O emulsion, following fat crystallization in the oil droplets in the oil-in-water (O/W) emulsion (Arima, S.; Ueno, S.; Ogawa, A.; Sato, K. Langmuir 2009, 25, 9777-9784).     

A facile one-step route to synthesize titania hollow microspheres with incontinuous multicavities

The titania hollow microspheres with incontinuous multicavities were successfully fabricated via an oil/ water(O/W) emulsion process accompanied by sol–gel reaction in the presence of polyvinylpyrrolidone(PVP). In the one-step route, the addition of PVP to the tetrabutyl titanate(TBT) 1-octanol solution as the oil phase of the O/W emulsion clearly expands the size of the cavities inside the microspheres. The and atoleine alters the polarity of the oil phase to affect the interior structure significantly. The Span 80 is used as a stabilizer to preserve spherical shape. A preliminary mechanism based on phaseseparation for the structural evolution of titania hollow microspheres with multicavities is suggested. Zirconia and alumina hollow microspheres with incontinuous multicavities can also be prepared by this one-step route successfully.     

纳米Ni催化剂在超稠油水热裂解降黏中的应用研究

采用甲基环己烷水正辛醇AEO9形成的微乳液体系制备纳米金属Ni催化剂，并利用该催化剂催化辽河超稠油的水热裂解反应。研究结果表明， 280℃时纳米金属Ni能够促进超稠油的水热裂解反应。与原超稠油相比，反应后样品的硫质量分数由0.45%降到0.23%，胶质、沥青质质量分数分别降低了15.83%、15.33%；GC-MS分析结果表明，甲基环己烷在改质过程中能够脱氢生成甲苯；C、H元素分析结果表明，反应后样品中胶质、沥青质的H/C原子比增加，说明从甲基环己烷上脱下的氢能够转移到超稠油中。表面活性剂AEO9、水和油，在改质结束后的降温过程中，形成了稳定的油包水型乳液，起到乳化降黏作用；而添加的甲基环己烷、正辛醇均能起到稀释降黏作用；在上述降黏作用的协同影响下，反应后样品50℃时的黏度由原来的139800mPa·s降至2400mPa·s，由此表明，纳米Ni催化剂对辽河超稠油水热裂解降黏的催化效果显著。