Effect of Emulsifier Type on the Characterization of O/W Emulsions Using a Spectroscopy Technique

The droplet size distribution (DSD) of emulsions is the result of two competitive effects that take place during emulsification process, i.e., drop breakup and drop coalescence, and it is influenced by the formulation and composition variables, i.e., nature and amount of emulsifier, mixing characteristics, and emulsion preparation, all of which affect the emulsion stability. The aim of this study is to characterize oil-in-water (O/W) emulsions (droplet size and stability) in terms of surfactant concentration and surfactant composition (sodium dodecyl benzene sulphonate (SDBS)/Tween 80 mixture). Ultraviolet-visible (UV-vis) transmission spectroscopy has been applied to obtain droplet size and stability of the emulsions and the verification of emulsion stability with the relative cleared volume technique (time required for a certain amount of emulsion to separate as a cleared phase). It is demonstrated that the DSD of the emulsions is a function of the oil concentration and the surfactant composition with higher stability for emulsions prepared with higher SDBS ratio and lower relative cleared volume with the time. Results also show that smaller oil droplets are generated with increasing Tween 80 ratio and emulsifier concentration.     

A review of: “Nineteenth Century Attitudes: Men of Science (Chemists and Chemistry Series,Vol. 13)”. Sydney Ross. Kluwer Academic Publishers; Dordrecht, 1991. pp. xi+235. $69.00.

Abstract

The potential of polytetrafluoroethylene (PTFE) membranes as water‐in‐oil (W/O) emulsification devices was investigated to obtain uniformly sized droplets and to convert them into microcapsules and polymer particles via subsequent treatments. Uniform W/O emulsion droplets have not been achieved using glass membranes unless the membrane was rendered hydrophobic by treatment with silanes. If a PTFE membrane is capable of providing uniform droplets for a W/O emulsion, a coordinated membrane emulsification system can be established since glass membranes have been so successful for O/W (oil‐in‐water) emulsification. In order to examine the feasibility of PTFE membrane emulsification, O/W and W/O emulsion characteristics prepared using PTFE membranes were compared with those prepared by the conventional SPG (Shirasu porous glass) membrane emulsification method. A 3 wt.% sodium chloride solution was dispersed in kerosene using a low HLB surfactant. Effects of the membrane pore size, permeation pressure, and the type of emulsifiers and concentration on the droplet size and on the size distribution (CV, coefficient of variation) were investigated. The CV of the droplets was fairly low, and the average droplet size was correlated with the critical permeation pressure of the dispersed phase, revealing that the PTFE membrane could be used as a one‐pass membrane emulsification device. Low CV values were maintained with a Span 85 (HLB = 1.8) concentration, 0.2–5.0 wt.% and a range of HLB from 1.8–5.0. For a brief demonstration of practical applications, nylon‐6,10 microcapsules prepared by interfacial polycondensation and poly(acrylamide) hydrogels from inverse suspension polymerization are illustrated.     

Preparation characteristics of water-in-oil-in-water multiple emulsions using microchannel emulsification

Microchannel (MC) emulsification is a novel technique for preparing monodispersed emulsions. This study demonstrates preparing water-in-oil-in-water (W/O/W) emulsions using MC emulsification. The W/O/W emulsions were prepared by a two-step emulsification process employing MC emulsification as the second step. We investigated the behavior of internal water droplets penetrating the MCs. Using decane, ethyl oleate, and medium-chain triglyceride (MCT) as oil phases, we observed successful MC emulsification and prepared monodispersed oil droplets that contained small water droplets. MC emulsification was possible using triolein as the oil phase, but polydispersed oil droplets were formed from some of the channels. No leakage of the internal water phase was observed during the MC emulsification process. The internal water droplets penetrated the MC without disruption, even though the internal water droplets were larger than the resulting W/O/W emulsion droplets. The W/O/W emulsion entrapment yield was measured fluorometrically and found to be 91%. The mild action of droplet formation based on spontaneous transformation led to a high entrapment yield during MC emulsification.     

Characterization of O/W emulsions of carotenes in blackberry juice performed by ultrasound and high-pressure homogenization

Carotene compounds are a group of natural pigments with potential applications in the food industry for their antioxidant activity, but due to their physicochemical instability and incompatibility with many food matrices, different technologies have been employed, such as emulsification, to improve stability and compatibility. Therefore, the physicochemical stability and antioxidant activity of carotene oil-in-water (O/W) emulsions were studied, using carotene compounds extracted from carrot as the oil phase and blackberry juice as the continuous phase. The effect of different factors on the stability of the emulsion – the relative concentration of the dispersed phase, the hydrophilic-lipophilic balance (HLB), the surfactant concentration, and the emulsification method – was assessed using surface response analysis. The emulsion with the best properties was obtained in the phase ratio 2:8 (v/v) with 6% surfactant and an HLB of 16.7. The ultrasound method produced emulsions with higher antioxidant stability and lower carotene degradation rates than those prepared by high pressure, when compared after 60 days of storage at 25°C. This study allowed the development of a stable emulsion with antioxidants in each of the phases of the emulsion that could be incorporated into several types of food products to produce functional foods.     

Emulsifying potency of new amino acid-type surfactant (II): stable water-in-oil (W/O) emulsions containing 85 wt% inner water phase

The ternary phase diagram for N-[3-lauryloxy-2-hydroxypropyl]-L-arginine L-glutamate (C12HEA-Glu), a new amino acid-type surfactant, /oleic acid (OA)/water system was established. The liquid crystal and gel complex formations between C12HEA-Glu and OA were applied to a preparation of water-in-oil (W/O) emulsions. Stable W/O emulsions containing liquid paraffin (LP) as the oil and a mixture of C12HEA-Glu and OA as the emulsifier were formed. The preparation of stable W/O emulsions containing 85 wt% water phase was also possible, in which water droplets would be polygonally transformed and closely packed, since the maximum percentage of inner phase is 74% assuming uniformly spherical droplets. Water droplets would be taken into the liquid crystalline phase (or the gel complex) and the immovable water droplets would stabilize the W/O emulsion system. The viscosity of emulsions abruptly increased above the 75 wt% water phase (dispersed phase). The stability of W/O emulsions with a lower weight ratio of OA to C12HEA-Glu and a higher ratio of water phase was greater. This unusual phenomenon may be related to the formation of a liquid crystalline phase between C12HEA-Glu and OA, and the stability of the liquid crystal at a lower ratio of oil (continuous phase). W/O and oil-in-water (O/W) emulsions containing LP were selectively prepared using a mixture of C12HEA-Glu and OA since the desirable hydrophile-lipophile balance (HLB) number for the emulsification was obtainable by mixing the two emulsifiers.     

Relationship between rheological properties and one-step W/O/W multiple emulsion formation

Formation of a normal (not temporary) W/O/W multiple emulsion via the one-step method as a result of the simultaneous occurrence of catastrophic and transitional phase inversion processes has been recently reported. Critical features of this process include the emulsification temperature (corresponding to the ultralow surface tension point), the use of a specific nonionic surfactant blend and the surfactant blend/oil phase ratio, and the addition of the surfactant blend to the oil phase. The purpose of this study was to investigate physicochemical properties in an effort to gain a mechanistic understanding of the formation of these emulsions. Bulk, surface, and interfacial rheological properties of adsorbed nonionic surfactant (CremophorRH40 and Span80) films were investigated under conditions known to affect W/O/W emulsion formation. Bulk viscosity results demonstrated that CremophorRH40 has a higher mobility in oil compared than in water, explaining the significance of the solvent phase. In addition, the bulk viscosity profile of aqueous solutions containing CremophorRH40 indicated a phase transition at around 78 ± 2 °C, which is in agreement with cubic phase formation in the Winsor III region. The similarity in the interfacial elasticity values of CremophorRH40 and Span80 indicated that canola oil has a major effect on surface activity, showing the significance of vegetable oil. The highest interfacial shear elasticity and viscosity were observed when both surfactants were added to the oil phase, indicating the importance of the microstructural arrangement. CremophorRH40/Span80 complexes tended to desorb from the solution/solution interface with increasing temperature, indicating surfactant phase formation as is theoretically predicted in the Winsor III region. Together these interfacial and bulk rheology data demonstrate that one-step W/O/W emulsions form as a result of the simultaneous occurrence of phase-transition processes in the Winsor III region and explain the critical formulation and processing parameters necessary to achieve the formation of these normal W/O/W emulsions.     

Optimization of Oil-in-Water Emulsion Stability: Experimental Design,Multiple Light Scattering,and Acoustic Attenuation Spectroscopy

To find an optimal formulation of oil-in-water (O/W) emulsions (φ_o = 0.05), the effect of emulsifier nature and concentration, agitation speed, emulsifying time, storage temperature and their mutual interactions on the properties and behavior of these dispersions is evaluated by means of an experimental design (Nemrodw software). Long-term emulsion stability is monitored by multiple light scattering (Turbiscan ags) and acoustic attenuation spectroscopy (Ultrasizer). After matching surfactant HLB and oil required HLB, a model giving the Sauter diameter as a function of emulsifier concentration, agitation speed and emulsification time is proposed. The highest stability of C₁₂E₄-stabilized O/W emulsions is observed with 1% emulsifier.     

FORMATION OF O/W EMULSIONS BY SURFACTANT PHASE EMULSIFICATION AND THE SOLUTION BEHAVIOR OF NONIONIC SURFACTANT SYSTEM IN THE EMULSIFICATION PROCESS

Surfactant-Phase Emulsification is a very useful method to produce oil-in-water emulsions having fine and uniform droplets. The mechanism of this emulsification method and the effect of hydrophile-lipophile balance (HLB) of the surfactants on the process of this emuisification were investigated by using phase diagrams of nonionic surfactant/hexadecane/water/1,3-butanediol four component systems.

It was shown that the process of this emulsification begins with the formation of isotropic surfactant solution, followed by formation of oil-in-surfactant clear gel emulsion, and finally by formation of oil-in-water emulsion. By using this emulsification technique, fine oil-in-water emulsions were formed without a need for adjusting of HLB.     

A one-step process for oil-in-water-in-oil double emulsion formation using a single surfactant

A one-step double emulsification protocol using one surfactant was developed for oil-in-water-in-oil (O(1)/W/O(2)) double emulsions. Two n-alkane oils and three different surfactants were studied, with focus placed on a formulation containing mineral oil, glycerol monoleate (GMO) and deionized water. Phenomenologically, double emulsion formation and stability originate from the combined actions of phase inversion and interfacial charging of the oil/water interface during high shear homogenization. Based on the extent of double emulsion formation and stability, a critical emulsification zone dependent on the weight ratios of GMO to water was identified. Within this critical zone, enhanced O(1)/W/O(2) emulsion formation occurred at higher pH and lower salt concentrations, demonstrating the key role of interfacial charging on double emulsification. Overall, this novel approach provides a novel platform for the development of double emulsions with simple compositions and processing requirements.     

细小乳状液的制备

For preparing O/W miniemulsions containing soybean oil and silicone oil, three methods, phase inversion emulsification, D-phase emulsification, reformed D-phase emulsification were tested by using Brij92, 97, 98 and Tween 80, 85, 60, 20 and Span 80, 60 mixed surfactants. It was found that the O/W miniemulsions of soybean oil and silicone oil can not be formed by phase inversion emulsification method, but can be formed by the two other methods. The results of emulsification showed that if gel emulsion, in which fine oil droplets disperse in continuous phase with high surfactant content, appears during the emulsification process, the O/W miniemulsions can be formed by simply diluting with water.     

Some experiments on complex spontaneous emulsification in the system water–benzene–ethanol

The system water–benzene–ethanol was used to illustrate the complexity of spontaneous emulsification, when water-poor emulsions are brought in contact with water. In the first case, an O/W emulsion located close to the plait point in the system was used. The aqueous phase in the emulsion was incompatible with water, and a strong spontaneous emulsification to an O/W between the two liquids took place in the water layer close to the interface between layers. In the second case, a W/O emulsion, also close to the plait point, was brought in contact with water. Now, the spontaneous emulsification between the water and the oil phase of the original emulsion to an O/W emulsion also took place in the water layer forming a distinct emulsion layer beneath the interface.     

Effect of process parameters and methylcellulose supplementation on the properties of n-undecane emulsions

Study was made on the influence of processing parameters on droplet size during emulsification with an Ultra-Turrax homogenizer. Emulsions of undecane in water, stabilized with nonionic Igepals, were prepared at the optimum hydrophilic-lipophilic balance (HLB) of 11.5 and oil-to-water (O/W) ratio of 5/95; the sizes of emulsion droplets were measured at intervals from the commencement of emulsification. Results showed that the optimum emulsification conditions, as pertaining to minimum particle size, arose at 13 400 rpm and 20 minutes of Ultra-Turrax treatment. Additionally, effects exerted by the presence of methylcellulose, time and storage temperature on the emulsions were determined. Emulsions prepared at the optimal processing parameters revealed that the smallest particle sizes (lower than 200 nm) and the best emulsion stability were demonstrated at the oil/water ratios of 3/97 and 5/95, with 3% surfactant content, an HLB value of 10 to 11 and the storage temperature of 25°C, irrespective of the content of methylcellulose.     

Mechanism of oil-in-water emulsification using a water-soluble amphiphilic polymer and lipophilic surfactant

A new O/W (oil-in-water) emulsification system was developed using the amphiphilic polymer HHM-HEC (hydrophobically-hydrophilically modified hydroxyethylcellulose) and a lipophilic surfactant. HHM-HEC was used as a thickener and polymeric surfactant, and the addition of small quantities of various types of nonionic lipophilic surfactant (hydrophilic-lipophilic balance <5) decreased the droplet size of several types of oil due to a lowering of the tension at the water/oil interface. The oil droplets were held by the strong network structure of the aqueous HHM-HEC solution, preserving the O/W phase without inversion. These stable O/W emulsions were prepared without the addition of hydrophilic surfactants and thus show improved water repellency.     

Effect of emulsifier HLB and stabilizer addition on the physical stability of thyme essential oil emulsions

The objective of this work was to formulate and to further improve the stability of emulsions based on thyme essential oil. Several nonionic surfactants of different nature and with different hydrophilic?lipophilic balance (HLB) values were investigated. The surfactant with optimal HLB found for the thyme essential oil was Appyclean 6548 (HLB: 9-9.5). Afterwards, stabilizing biopolymers were added in order to improve emulsion stability. Properties of emulsions were evaluated in terms of droplet size and physical stability. Thyme essential oil/W emulsions formulated with a new biodegradable emulsifier (alkyl polypentoside) and welan gum as stabilizer were obtained with high shelf-life.     

Factors in the Single-Step Bulk Process Preparation of a Triple Janus Emulsion

Some factors in the preparation of triple Janus emulsions in a single-step bulk process were investigated using optical microscopy. The emulsions consisted of water, O.097 weight fraction, a commercial surfactant, Tween 80, 0.03 weight fraction, a vegetable oil (VO), 0.18 weight fraction, and a silicone oil (SO), 0.72 weight fraction. A surprising connection was found between the state of the compounds prior to mixing and the final morphology as well as stability of the emulsion. Separately adding the compounds or with the surfactant dissolved in the vegetable oil, prior to mixing, did not result in a Janus emulsion. Instead, simpler emulsions with limited stability were attained even with prolonged mixing. Storing the compounds together without mixing for two days followed by mixing resulted in a Janus emulsion in which the (VO + SO)/W/VO drops were more sparsely populated with Janus drops, and emulsion stability was limited. Finally, preparing the emulsion from the aqueous surfactant solution and the two oils gave a (VO + SO)/W/VO/SO emulsion with the W drops heavily populated by Janus drops and with improved stability.      

Preparation of a stable double emulsion (W1/O/W2): role of the interfacial films on the stability of the system

This paper presents new protocols enabling preparation of W1/O/W2 double emulsions: one, using soybean oil as the O phase, that yields edible emulsions with industrial applications, and a second that yields emulsions with a previously unattainable concentration 15% (w/w) of surfactants in the external phase (the 15% target was chosen to meet the typical industry standard). Preparation of a stable W1/O emulsion was found to be critical for the stability of the system as a whole. Of the various low HLB primary surfactants tested, only cethyl dimethicone copolyol (Abil EM90), A-B-A block copolymer (Arlacel P135), and polyglycerol ester of ricinoleic acid (Grinstead PGR-90) yielded a stable W/O emulsion. Investigation of the surface properties of those surfactants using the monolayer technique found two significant similarities: (1) stable, compressible, and reversibly expandable monolayers; and (2) high elasticity and surface potential. The high degree of elasticity of the interfacial film between W1 and O makes it highly resilient under stress; its failure to break contributes to the stability of the emulsion. The high surface potential values observed suggest that the surfactant molecules lie flat at the O/W interfaces. In particular, in the case of PGR-90, the hydroxyl (-OH) groups on the fatty acid chains serve as anchors at the O/W interfaces and are responsible for the high surface potential. The long-term stability of the double emulsion requires a balance between the Laplace and osmotic pressures (between W1 droplets in O and between W1 droplets and the external aqueous phase W2). The presence of a thickener in the outer phase is necessary in order to reach a viscosity ratio (preferably approximately 1) between the W1/O and W2 phases, allowing dispersion of the viscous primary emulsion into the W2 aqueous phase. The thickener, which also serves as a dispersant and consequently prevents phase separation due to its thixotropic properties, must be compatible with the surfactants. Finally, the interactions between the low and high HLB emulsifiers at the O/W2 interface should not destabilize the films. It was observed that such destructive interaction for the system could be prevented by the use of two high HLB surfactants in the outer aqueous phase: an amphoteric surfactant, Betaine, and an anionic surfactant, sodium lauryl ether sulfate. The combination of such pairs of surfactants was found to contribute to the films' stability.     

Study of SPG membrane emulsification processes for the preparation of monodisperse core-shell microcapsules

Experimental investigations on the Shirasu-porous-glass (SPG)-membrane emulsification processes for preparing monodisperse core-shell microcapsules with porous membranes were carried out systematically. The results showed that, to get monodisperse oil-in-water (O/W) emulsions by SPG membrane emulsification, it was more important to choose an anionic surfactant than to consider hydrophile-lipophile balance (HLB) matching. Increasing the viscosity of either the disperse phase or the continuous phase or decreasing the solubility of the disperse phase in the continuous phase could improve both the monodispersity and the stability of emulsions. With increasing monomer concentration inside the disperse phase, the monodispersity of emulsions became slightly worse and the mean diameter of emulsions gradually became smaller. Monodisperse monomer-containing emulsions were obtained when the SPG membrane pore size was larger than 1.0 micro m, and from these emulsions satisfactory monodisperse core-shell microcapsules with a porous membrane were prepared. On the other hand, when the SPG membrane pore size was smaller than 1.0 mciro m, no monodisperse emulsions were obtained because of the formation and chokage of solid monomer crystals in the pores or at the end of the pores of the SPG membrane. This was due to the remarkable solvation and diffusion of the solvent in water. With increasing the emulsification time the average emulsion diameter generally decreased, and the monodispersity of the emulsions gradually became worse.     

阴阳离子表面活性剂混合体系对原油的乳化及增粘行为

利用阴阳离子表面活性剂复配技术,实现了高含水量原油体系的乳化及增粘. 通过调整表面活性剂分子结构,解决了阴阳离子表面活性剂复配体系在油田模拟水中的溶解度问题. 确定了相关体系高含水量油包水（W/O）乳状液的表面活性剂浓度,研究了可以产生高含水量油包水乳状液的油水混合体积比范围,并研究了温度、pH值、油水混合比例和离子强度对乳化及增粘作用的影响. 获得了一系列具有优良乳化效果和乳状液稳定性的体系,其中部分体系粘度可增大80倍. 这对于三次采油提高采收率有重要意义.     

Incomplete phase inversion W/O/W emulsion and formation mechanism from an interfacial perspective

Water-in-oil-in-water (W/O/W) double emulsion can be prepared by incomplete phase inversion method using both medium chain triglycerides (MCT) and isopropyl myristate (IPM) as oil phase, Span 85-Tween 80 (HLB values of 2.5-3.0) as mixed emulsifiers. The preparation method was simple, and the final double emulsions were proved of good microstructure and particle size distribution. Owning to the addition of Tween 80 to Span 85, interfacial tension, interfacial viscosity and modulus decreased, which contributed to the phase inversion. Furthermore, formation of reverse micelles under high-speed dispersion may be a hypothesis to explain the incomplete phase inversion phenomenon.     

阴阳离子表面活性剂混合体系对原油的乳化及增粘行为

利用阴阳离子表面活性剂复配技术,实现了高含水量原油体系的乳化及增粘.通过调整表面活性剂分子结构,解决了阴阳离子表面活性剂复配体系在油田模拟水中的溶解度问题.确定了相关体系高含水量油包水(W/O)乳状液的表面活性剂浓度,研究了可以产生高含水量油包水乳状液的油水混合体积比范围,并研究了温度、pH值、油水混合比例和离子强度对乳化及增粘作用的影响.获得了一系列具有优良乳化效果和乳状液稳定性的体系,其中部分体系粘度可增大80倍.这对于三次采油提高采收率有重要意义.