杯［4］芳烃硼酸与氨基酸配位作用的荧光光谱研究

用荧光光谱滴定法研究了10种杯[4]芳烃硼酸与4种氨基酸的配位作用,根据扩展的Hilderbrand-Benesi公式,计算出配合物的稳定常数和配位反应的Gibbs自由能变化,杯[4]芳烃硼酸与L－丙氨酸的配位能力和配位选择性均较,可以使用杯[4]芳烃硼酸通过荧光光谱法鉴别D－丙氨酸。     

Synthesis of （p—Substituted phenyl）azo Calix[4] arenes

A novel method for the preparation of chromogenic calixarenes with azo groups was reported.p-Substituted(-NO2,-CH3,-Cl)amilines were diazotized with isoamyl nitrite in EtONa/EtOH under refluxing condition.Fifteen mono-,bis-,tris-and tetrakis(p-substituted phenyl)azo calix[4]arenes (including proximal and distal isomers) were obtainged respectively by diazo-coupling in different molar ratio to calix[4]arenes(1) under pH=7.5-9.0 in non-aqueous solution at 0-5℃.^1H NMR and ^13C NMR spectra of (p-substtituted phenyl)azo calix[4]-arenes indicated that they existed in cone conformation in solution.     

Synthesis and Conformations of Adamantylated Calix[5]- and -[6]arenes

Procedures have been developed for the preparation of completely and partially adamantylated calix[n]arenes (n = 5, 6) by reaction of 3-R-substituted 1-hydroxyadamantanes (R = H, 4-MeC₆H₄, 4-MeSO₂C₆H₄, 4-HO-3-HOCOC₆H₃, HOCOCH₂) with p-H-calix[n]arenes (n = 5, 6) and 5,11,23,29-tetra-tert-butylcalix[6]arene in trifluoroacetic acid. Lower- and upper-rim modification of the prepared compounds has been studied. According to the ¹H NMR data, adamantylcalix[6]arenes possessing carboxymethyl groups in the adamantane moieties are characterized by reduced conformational mobility.     

Unique self-assembly patterns based on thiacalix[4]arene-silver interactions

Novel self-assembled supramolecular networks were prepared by the interactions of thiacalix[4]arenes bearing simple alkyl groups on the lower rim (4×MeO-, 4×n-PrO-) with silver triflate. Contrary to the classical calix[4]arenes (with CH₂ bridges between the aromatic moieties), the presence of four sulfur atoms enables the formation of S-Ag-S connections between the individual molecules leading to the coordination topology so far unknown in calixarene chemistry. These systems form infinite 1-D coordination polymeric structures in the solid state, where the thiacalixarene moieties are preorganized in a side-by-side arrangement. Interestingly, the linear coordination polymers were obtained using both the conformational immobilised (4×n-PrO, cone, 1,3-alternate conformers) and the conformational mobile (4×MeO) thiacalix[4]arenes, which indicates the generality of this behaviour in thiacalixarene series.     

Synthesis of chiral calix[4]arenes bearing tartaric ester moieties

The synthesis of chiral calix[4]arenes with tartaric acid ester moieties has been achieved by the reactions of tartaric ester chloroacetates with calix[4]arenes in moderate yields. All the chiral calix[4]arene derivatives are in a cone conformation according to the ¹H NMR doublet–doublet pattern of the protons of the methylene groups between the phenol rings. The results of NMR and specific rotations indicate that the molecules have C₂ symmetry with asymmetric features.     

Synthesis of （p-Formylphenyl）azo Calix[4]arenes

Five novel azo calix[4]arenes were reported. The p-aminobenzaldehyde was diazotized with sodium nitrite in aqueous hydrochloride solution. Mono-, bis-, tris- and tetrakis(p-formylphenyl)azo calix[4]arenes (including proximal and distal isomers) were obtained respectively by diazo-coupling in different molar ratio to calix[4]arene(1) under pH=7.5--8.5 at 0-5℃. All (p-formylphenyl)azo calix[4]arenes were characterized by ^1H NMR, ^13C NMR, IR, MS (ESIMS) spectroscopies and elemental analysis.     

Conformationally Selective Synthesis of Mononitrocalix[4]arene in Cone or Partial Cone

Nitro‐substituted calixarenes in a cone and a partial cone conformation were prepared selectively using distinct synthetic routes. The selective nitration of tris‐ or penta‐substituted phenols of calix[4]arene or calix[6]arene provided mononitrocalix[n ]arenes (n  =  4, 6). Subsequent addition of ethylene glycol (EG) moieties to mononitrocalix[4]arene provided tetraEGylcalix[4]arene in locked partial cone conformation. By an alternative route – initial addition of EG moieties to the non‐derivatized calix[4]arene followed by the uncontrolled nitration – provided mononitro‐ and dinitro‐tetraEGylcalix[4]arenes locked in the cone conformation. These nitrocalix[4]arenes with locked cone or partial cone conformation are useful building blocks for further assembly of supramolecular systems, especially in the area of material sciences.     

Upper Rim Diester—bridged Calix[4] arenes and Oligocalix [4]—arenes：the Effects of the Length of Bridged Reagents on Their Distribution

A series of monobridged calix [4] arenes 3a-f,cyclic biscalix-[4] arenes 4a-f ,diametrically bridged at the upper rim with saturated aliphatic diester chians,have been synthesized,The results at diluted conditions show that the percentage of yields of mono-,bis- and oligo-calix[4] arenes are related to the legth of the chains ,With the shortening of the chains ,the percent-age of monocalix[4] arenes decreased ,All the calix [4] arene moieties are in a cone conformaiton according to the AB quar-tet pattern of the methylene protons between the phenolic rings in the ^1H NMR spectra.     

Complexation and extraction of non-ferrous metals by calix[n]arene phosphine oxides

The extraction of non-ferrous metal (M²⁺) nitrates by the calix[4,6]arenes (L), bearing four or six phosphine oxide donor groups at the upper or at the lower rim, was quantitatively described in the form of [M_n(NO₃)_2nL] (n = 1, 2) complexes. The extraction constants (Zn²⁺ > Cu²⁺ > Co²⁺ > Ni²⁺) for the both types of L coincide with Irving-Williams sequence. Calix[4]arenes, phosphorylated at the lower (narrow) rim, provide better stability of ML complexes because of the best spatial fitting of M²⁺ by the donor groups. For the upper (wide) rim phosphorylated calix[4]arenes M₂L and ML₂ complexes are more stable. Unusual zwitterionic [Co₂(NO₃)₄L] complex of the lower rim tetraphosphorylated calix[4]arene 1 was determined by X-ray structural analysis.     

Water‐Soluble Molecular Capsules: Self‐Assembly and Binding Properties

The self‐assembly and characterization of water‐soluble calix[4]arene‐based molecular capsules ( 1?2 ) is reported. The assemblies are the result of ionic interactions between negatively charged calix[4]arenes 1 a and 1 b , functionalized at the upper rim with amino acid moieties, and a positively charged tetraamidiniumcalix[4]arene 2 . The formation of the molecular capsules is studied by ¹H NMR spectroscopy, ESI mass spectrometry (ESI‐MS), and isothermal titration calorimetry (ITC). A molecular docking protocol was used to identify potential guest molecules for the self‐assembled capsule 1 a?2 . Experimental guest encapsulation studies indicate that capsule 1 a?2 is an effective host for both charged (N‐methylquinuclidinium cation) and neutral molecules (6‐amino‐2‐methylquinoline) in water.     

A,C-Bridged Calix[6]arene： Relationship between the Length of Bridge and Conformation

Three new A,C-diamide bridged p-tert-butylcalix[6]arenes were synthesized from p-tert-butylcalix[6]arenes by bridging ClCH2CONH(CH2)nNHCOCH2Cl(n=3,4,6) in acetonitrile using K2CO3 as a base in 17%-25% yields.It was found that the bridged calix[6]arenes with shorter bridges (n=2,3,4 in N′,N′-bischloroacetodiamines) adopt cone conformation, but the last one (n=6) adopts alternate conformation, i.e., accompanying the lengthening of bridge, the conformation of A,C-bridged calix[6]arenes changes from cone to alternate.     

Syntheses,characterizations and properties of boronoalkylalkoxycalix[4]arenes

Some new calixarenes bearing boronic acid moieties, boronoalkylalkoxycalix[4]arenes, were synthesized by allylation, Claisen's rearrangement, alkylation, hydroboration and hydrolysis from 25,26,27,28-tetrahydroxycalix[4]arene and their structures were identified by elemental analysis, IR, ¹H NMR, ¹³C NMR, ¹¹B NMR, MS and UV spectra. The UV data showed that tetraalkoxycalix[4]arene tetraalkyltriboronic acid could coordinate significantly with carbohydrates.     

Calix[4]Arenes in the partial cone conformation as ionophores in silver ion-selective electrodes

Two calix[4]arene derivatives, in the partial cone conformation, with sulfur-containing functionalities, were tested as neutral carrier ionophores in potentiometric silver-selective electrodes of conventional membrane and membrane-coated glassy carbon electrode types. Comparison with a calix[4]arene in the cone conformation was made. The membranes were prepared using either 2-nitrophenyl octyl ether or bis(ethylhexyl)sebacate as plasticizers and potassium tetrakis(p-chlorophenyl)borate as the lipophilic salt in a poly(vinyl chloride) matrix. Both calix[4]arenes yielded electrodes of good sensitivity (approx. 47 mV dec⁻¹) in the range 10⁻⁴–10⁻¹ M and excellent selectivity [log K_Ag,_MH+ < −1.5] of transition, alkali and heavy metal cations, including sodium, mercury(II) and lead(II) cations. Temperature effects and reproducibility of response were determined and the interfering effects of mercury(II) and lead (II) ions on the membranes were noted. The partial cone conformation allows improved selectivity over certain cations relative to calix[4]arenes in the cone conformation.     

Bridge-disubstituted calix[4]arenes obtained via a new preparative route. Synthesis and structural study

A series of calix[4]arenes bearing various substituents including alkyl, p-bromobenzyl, carboxy and allyl at opposite methylene bridges has been synthesized via successive metallation followed by nucleophilic substitution. In a first step, mono-lithiated calix[4]arenes react with terminal bromoalkanes to give 2-alkylated calix[4]arenes or with CO₂ the respective calixarene-2-carboxylic acid in good yields. A second lithiation step of the monosubstituted products with subsequent attachment of both polar and non-polar substituents yields several new diametrally bridge-disubstituted calix[4]arenes. 2D-NMR measurements establish the disubstituted calixarenes to predominantly adopt the 1,2-alternate conformation in solution. First examples of X-ray crystal structures of the new type of disubstituted calix[4]arenes are described featuring the calix[4]arene also in the rare 1,2-alternate conformation.     

Studies on Properties of p—Nitrophenylazo Calix[4]arene Derivatives

The p-nitrophenylazo calix[4] arene derivatives la-ld with nonlinear optical(NLO)properties were prepared by the diazo-coupling reaction of calix[4]arene with p-nitrophenyl diazonium.The diazotization reaction of p-nltroaniline was caried out with isoamyl nitrite as a source of nitrous acid in EtONa/EtOH under refluxing conditon.X-Ray crystallographic analysis and ^1H NMR sptectra reveal that they exist as cone conformation in crystal state or in soution.HRS measurements at 1064 nm in THF indicate that p-nitrophenylazo calix[4]arenes have higher hyperpolarizability βz values than the corresponding reference compound 4-(4-nitrophenylazo)-2,6-dimethyl-phenol,without red shift of the charge transfer band.The tetrakis p-nitropheylazo calix[4]arene(2)with longer alkyl chains can form monolayer aht the air/water interface.     

Selective Upper-Rim Adamantylation of Calix[4]arenes

Lower-rim mono- and diacylated calix[4]arenes [acyl = C₆H₅CO, 3,5-(NO₂)₂C₆H₃CO] undergo selective adamantylation with 3-Y-1-adamantanols (Y = H, i-Pr, 4-MeC₆H₄) in trifluoroacetic acid at the free phenolic fragments of the macroring. The reaction provides a convenient preparative route to di-, tri-, and tetraadamantylated calix[4]arenes.     

A Self‐Assembled Calix[4]arene Dimer Linked through Hydrogen‐Bonded 2‐Ureidopyrimidin‐4(1H)‐one Groups

Tightly linked! A linear array of complementary hydrogen bonds forms between two 2‐ureidopyrimidin‐4(1H)‐one rings attached to the upper rims of facing 1,3‐alternate calix[4]arenes (shown schematically). The strength of the binding (K_ass>10⁶ M ⁻¹ in chloroform) and the efficiency of the self‐assembly open up interesting perspectives in the design of highly ordered multicomponent cages.     

The enhancement of luminescent properties of Tb3+ complexes with tetra-1,3-diketone ligands promoted by the tetrathiacalix[4]arene scaffold

This is the first report on the synthesis and characterization of tetra-1,3-diketone derivatives of tetrthia- and calix[4]arenes substituted by acetylacetonyl or dipivaloylmethanyl moieties at the upper rim and bearing hydroxyl groups at the lower rim as ligands for Tb³⁺ complexes. The spatial structure and tautomeric content for the synthesized ligands have been determined by means of X-ray, IR and NMR spectroscopy. Comparison of the sensitizing properties of tetrathiacalix[4]arenes and their calix[4]arene analogues on the Tb³⁺-centered luminescence in DMF solutions has been performed. A substantial enhancement of the luminescent properties of Tb³⁺- complexes with tetra-1,3-diketone ligands promoted by the tetrathiacalix[4]arene scaffold was established.     

Cavity‐Shaped Ligands: Calix[4]arene‐Based Monophosphanes for Fast Suzuki–Miyaura Cross‐Coupling

Five conical calix[4]arenes that have a PPh₂ group as the sole functional group anchored at their upper rim were assessed in palladium‐catalysed cross‐coupling reactions of phenylboronic acid with aryl halides (dioxane, 100 °C, NaH). With arylbromides, remarkably high activities were obtained with the catalytic systems remaining stable for several days. The performance of the ligands is comparable to a Buchwald‐type triarylphosphane, namely, (2′‐methyl[1,1′‐biphenyl]‐2‐yl)diphenylphosphane, which in contrast to the calixarenyl phosphanes tested may display chelating behaviour in solution. With the fastest ligand, 5‐diphenylphosphanyl‐25,26,27,28‐tetra(p‐methoxy)benzyloxy‐calix[4]arene ( 8 ), the reaction turnover frequency for the arylation of 4‐bromotoluene was 321 000 versus 214 000 mol(ArBr).mol(Pd)^?1. h^?1 for the reference ligand. The calixarene ligands were also efficient in Suzuki cross‐coupling reactions with aryl chlorides. Thus, by using 1 mol % of [Pd(OAc)₂] associated with one of the phosphanes, full conversion of the deactivated arenes 4‐chloroanisole and 4‐chlorotoluene was observed after 16 h. The high performance of the calixarenyl–phosphanes in Suzuki–Miyaura coupling of aryl bromides possibly relies on their ability to stabilise a monoligand [Pd⁰L(ArBr)] species through supramolecular binding of the Pd‐bound arene inside the calixarene cavity.     

Constructing a Nonfluorescent Conformation of AIEgen: A Tetraphenylethene Embedded in the Calix[4]arene's Skeleton

Two novel 1,1‐diphenylmethylidene decorated calix[4]arenes, ( Calix‐DPE(OCH₃)₄ and Calix‐DPE(OH)₄ ), were designed and prepared. The tetraphenylethene (TPE) unit is embedded in the calix[4]arenes skeleton, so the conformation of tetraphenylethene unit is significantly affected by the conformation of calix[4]arene. Unlike the Calix‐DPE(OCH₃)₄ , the Calix‐DPE(OH)₄ does not show the aggregation‐induced emission (AIE) phenomena in solution or the crystal state because of the presence of intramolecular hydrogen bonding, which leads to a cone conformation for the calix[4]arene skeleton in which the embedded phenyl rings of the TPE have to take an almost perpendicular configuration to the C=C bond. This result provides direct evidence that the maximal cross‐chromophore π‐conjugation within the tetraphenylethene is one of the prerequisites of switching on its AIE. This offers the possibility of switching the emission of TPE by conformation changes.