Tuning of Thermoresponsivity of a Poly(2‐alkyl‐2‐oxazoline) Block Copolymer by Interaction with Surface‐Active and Chaotropic Metallacarborane Anion

Thermoresponsive nanoparticles based on the interaction of metallacarboranes, bulky chaotropic and surface‐active anions, and poly(2‐alkyl‐2‐oxazoline) block copolymers were prepared. Recently, the great potential of metallacarboranes have been recognized in biomedicine and many delivery nanosystems have been proposed. However, none of them are thermoresponsive. Therefore, a thermoresponsive block copolymer, poly(2‐methyl‐2‐oxazoline)‐block‐poly(2‐n‐propyl‐2‐oxazoline) (PMeOx–PPrOx), was synthesized to encapsulate metallacarboranes. Light scattering, NMR spectroscopy, isothermal titration calorimetry, and cryogenic TEM were used to characterize all solutions of the formed nanoparticles. The cloud‐point temperature (T_CP) of the block copolymer was observed at 30 °C and polymeric micelles formed above this temperature. Cobalt bis(dicarbollide) anion (COSAN) interacts with both polymeric segments. Depending on the COSAN concentration, this affinity influenced the phase transition of the thermoresponsive PPrOx block. The T_CP shifted to lower values at a lower COSAN content. At higher COSAN concentrations, the hybrid nanoparticles are fragmented into relatively small pieces. This system is also thermoresponsive, whereby an increase in temperature leads to higher polymer mobility and COSAN release.     

Microstructure of un-neutralized hydrophobically modified alkali-soluble emulsion latex in different surfactant solutions

At low pH conditions and in the presence of anionic, cationic, and nonionic surfactants, hydrophobically modified alkali-soluble emulsions (HASE) exhibit pronounced interaction that results in the solubilization of the latex. The interaction between HASE latex and surfactant was studied using various techniques, such as light transmittance, isothermal titration calorimetry, laser light scattering, and electrophoresis. For anionic surfactant, noncooperative hydrophobic binding dominates the interaction at concentrations lower than the critical aggregation concentration (CAC) (C < CAC). However, cooperative hydrophobic binding controls the formation of mixed micelles at high surfactant concentrations (C > or = CAC), where the cloudy solution becomes clear. For cross-linked HASE latex, anionic surfactant binds only noncooperatively to the latex and causes it to swell. For cationic surfactant, electrostatic interaction occurs at very low surfactant concentrations, resulting in phase separation. With further increase in surfactant concentration, noncooperative hydrophobic and cooperative hydrophobic interactions dominate the binding at low and high surfactant concentrations, respectively. For anionic and cationic surfactant systems, the CAC is lower than the critical micelle concentration (CMC) of surfactants in water. In addition, counterion condensation plays an important role during the binding interaction between HASE latex and ionic surfactants. In the case of nonionic surfactants, free surfactant micelles are formed in solution due to their relatively low CMC values, and HASE latexes are directly solubilized into the micellar core of nonionic surfactants.     

Aqueous Self‐Assembly and Cation Selectivity of Cobaltabisdicarbollide Dianionic Dumbbells

The anion [3,3′‐Co(C₂B₉H₁₁)₂]^? ([COSAN]^?) produces aggregates in water. These aggregates are interpreted to be the result of C?H???H?B interactions. It is possible to generate aggregates even after the incorporation of additional functional groups into the [COSAN]^? units. The approach is to join two [COSAN]^? anions by a linker that can adapt itself to act as a crown ether. The linker has been chosen to have six oxygen atoms, which is the ideal number for K⁺ selectivity in crown ethers. The linker binds the alkaline metal ions with different affinities; thus showing a distinct degree of selectivity. The highest affinity is shown towards K⁺ from a mixture containing Li⁺, Na⁺, K⁺, Rb⁺ and Cs⁺; this can be indicative of pseudo‐crown ether performance of the dumbbell. One interesting possibility is that the [COSAN]^? anions at the two ends of the linker can act as a hook‐and‐loop fastener to close the ring. This facet is intriguing and deserves further consideration for possible applications. The distinct affinity towards alkaline metal ions is corroborated by solubility studies and isothermal calorimetry thermograms. Furthermore, cryoTEM micrographs, along with light scattering results, reveal the existence of small self‐assemblies and compact nanostructures ranging from spheres to single‐/multi‐layer vesicles in aqueous solutions. The studies reported herein show that these dumbbells can have different appearances, either as molecules or aggregates, in water or lipophilic phases; this offers a distinct model as drug carriers.     

<Superscript>13</Superscript>C NMR investigation of the structure of alkylammonium chloride micells in aqueous solutions

¹³C NMR chemical shifts are obtained for aqueous solutions of alkylammonium chlorides (C₆–C₉) in the region of the critical micelle concentration (CMC). A new method of processing ¹³C NMR experimental data for aqueous solutions of alkylammonium chlorides is developed to calculate the aggregation numbers N of micelles and the equilibrium constants K of the micelle formation within the law of mass action. With the use of these N and K values the standard Gibbs energy of the micelle formation and its increment of −1.8 kJ/mol are found for the methylene group. A small increment confirms the hypothesis about the structure of micelles consisting of both contact and hydrated associates. The structural model of the association of alkylammonium chlorides in water, the effect of alkyl chain length on the CMC, the hydrophobic interaction, the formation of hydrate associates, and also a possible classification of surfactants based on this are discussed.     

Role of the tracer in characterizing the aggregation behavior of aqueous block copolymer solutions using fluorescence correlation spectroscopy

The hydrodynamic radii of micelles formed by amphiphilic poly(2-alkyl-2-oxazoline) diblock copolymers in aqueous solution determined using fluorescence correlation spectroscopy (FCS) depend on the nature of the fluorescent tracer used. We have compared the values of the hydrodynamic radii of the unimers and the micelles as well as the critical micelle concentrations (CMC), using as tracers (1) the identical diblock copolymers being fluorescence-labeled at the hydrophilic or the hydrophobic block terminus [Bonné et al. Colloid Polym Sci (2004) 282:833–843], and (2) a low molar mass fluorescence dye, rhodamine 6G. Whereas similar values for the CMC were found for both probes, the hydrodynamic radius of micelles is significantly underestimated using a free dye as a tracer in FCS, especially near the CMC. We attribute this discrepancy to the fast exchange of the dye between micelles and solution.     

Determination of critical micellar concentrations of two monoketo derivatives of cholic acid

Critical micellear concentrations (CMC) were determined for two novel promoters of membrane permeability—7-monoketocholic acid (7-MKC) and 12-monoketocholic acid (12-MKC), using two non-invasive (¹H NMR relaxation experiment and conductometry) and two invasive (spectral shift and partition coefficient of the probe molecule) methods. Studies by the former methods suggest the different aggregation abilities of the investigated bile acid derivatives. In an aqueous solution, 7-MKC has a somewhat lower CMC value (43 mM) than 12-MKC (50 mM). Further, it was found that, in addition to primary micelles, 7-MKC forms also secondary micelles. In the experiments with probe (hydrophobic) molecules, the aggregation properties of investigated bile acids did not differ in water, whereas the presence of urea altered the aggregation of 7-MKC.Based on the CMC value, 7-MKC is more hydrophobic than 12-MKC. The apparent hydrophobicity of 7-MKC is a consequence of the formation of secondary micelles, shifting the monomer equilibrium to the direction of primary micelles, which is manifested as a decrease in the CMC value.     

Transport of monomer surfactant molecules and hindered diffusion of micelles through porous membranes

Diffusion of Triton X-100 through Celgard 2500 membranes was examined. The pore permeability for monomers was 5.0 × 10⁻⁶ cm²/sec and it was measured for upstream concentrations below the CMC value of 2.29 × 10⁻⁴M at 30°C. This value is close to the monomer diffusion coefficient in bulk suggesting that the monomers do not experience significant hindrance due to the pore walls. The permeability of the surfactant drops abruptly within a narrow range of reservoir solution concentrations in the vicinity of the CMC. At concentrations 10 × CMC, the permeability coefficient becomes constant and equal to 3.9 × 10⁻⁷ cm²/sec which is the pore permeability for the Triton X-100 micelles. Compared to the diffusion coefficient of micelles in bulk water, the transport of micelles is hindered by the pore walls. In a 10-fold concentration range the micellar pore permeability is practically constant indicating no large change in micelle size. The chemical equilibrium model applied to surfactant diffusion in pores shows reasonable agreement over the entire range of the experimental data for reservoir concentrations from one-fifth times the CMC to 100 times the CMC.     

Direct grafting modification of pulp in ionic liquids and self-assembly behavior of the graft copolymers

In this paper, a novel biodegradable biomass-based amphiphile was prepared by direct grafting copolymerization of dissolved pulp with hydrophobic poly (l-lactide) in ionic liquids BmimCl. The molecular structures of the obtained copolymers were confirmed with ¹H-NMR, ¹³C-NMR and 2D HSQC NMR, and their physical properties were studied by TGA and XRD analysis. The self-assembly behaviors of these amphiphilies in aqueous solution was characterized by fluorescence spectrum and their critical micelle concentrations (CMC) were determined to be in the range of 0.326–0.062 mg/mL. TEM observations and DLS analysis revealed that the pulp-derived micelles had spherical and uniform morphology and small diameters (25–125 nm). It was also found that the surface tension of these copolymers solution firstly decreased dramatically with increasing concentration and then approached to a plateau value when the concentration was above their CMC value. MTT assay showed that the pulp-derived amphiphilic micelles exhibited good biocompatibility, which informed that these micelles could be expected to be used in biological regions, especially for the hydrophobic drug delivery system.     

Synthesis and micelle formation of triblock copolymers of poly(methyl methacrylate)-b-poly(ethylene oxide)-b-poly(methyl methacrylate) in aqueous solution

Amphiphilic triblock copolymers of poly(methyl methacrylate)-b-poly(ethylene oxide)-b-poly(methyl methacrylate) (PMMA-b-PEO-b-PMMA) with well-defined structure were synthesized via atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) initiated by the PEO macroinitiator. The macroinitiator and triblock copolymer with different PMMA and/or PEO block lengths were characterized with ¹H and ¹³C NMR and gel permeation chromatography (GPC). The micelle formed by these triblock copolymers in aqueous solutions was detected by fluorescence excitation and emission spectra of pyrene probe. The critical micelle concentration (CMC) ranged from 0.0019 to 0.016 mg/mL and increased with increasing PMMA block length, while the PEO block length had less effect on the CMC. The partition constant K_v for pyrene in the micelle and in aqueous solution was about 10⁵. The triblock copolymer appeared to form the micelles with hydrophobic PMMA core and hydrophilic PEO loop chain corona. The hydrodynamic radius R_h,app of the micelle measured with dynamic light scattering (DLS) ranged from 17.3 to 24.0 nm and increased with increasing PEO block length to form thicker corona. The spherical shape of the micelle of the triblock copolymers was observed with an atomic force microscope (AFM). Increasing hydrophobic PMMA block length effectively promoted the micelle formation in aqueous solutions, but the micelles were stable even only with short PMMA blocks.     

Supramolecular systems formed by calix[4]resorcinarenes and surfactants in chlorophorm

Capacity titration and ¹H NOESY 2D NMR were applied to investigation of intermolecular interactions and aggregation of amphiphilic calix[4]resorcinarenes (CRA 1, 2) modified with 1,2,4-triazine (1) and oxazine (2) functions in chloroform in the presence of cationic (3) and non-ionic (4) surfactants (SAA). Critical concentrations of micelle formation (CMC) indicate that the ability of CRA 1, 2 to form supramolecular aggregates like micelles or hybrid micelles with SAA 3, 4 only weakly depends on the constitution of CRA functional groups. In the case of the hybrid micelles, when CMC are defined by the nature of surfactants 3 or 4, the methyl and methylene groups of the hydrophobic fragments (CRA 1, 2) were found to interact with the hydroxy groups of SAA 3 and ethylene oxide moieties of SAA 4.     

Micellar Formation Study of Crown Ether Surfactants

Fluorescence probe and nuclear magnetic resonance (NMR) methods were employed to investigate the micellation of prepared crown ether surfactants, e.g. decyl 15‐crown‐5 and decyl 18‐crown‐6. Pyrene was employed as the fluorescence probe to evaluate the critical micellar concentration (CMC) of these surfactants in aqueous solutions while spin lattice relaxation times (T₁) and chemical shifts of H‐1 NMR were applied in non‐aqueous solutions. Decyl 15‐crown‐5 with lower CMC forms micelles much easier than decyl 18‐crown‐6 with higher CMC in aqueous solutions, whereas decyl 18‐crown‐6 forms micelles easier than decyl 15‐crown‐5 in nonaqueous solutions. Comparison of the CMC of crown ether surfactants and other polyoxyethylene surfactants such as decylhexaethylene glycol was made. Effects of salts and solvents on the micellar formation were also investigated. In general, additions of both alkali metal salts and polar organic solvents into the aqueous surfactant solutions increased in the CMC of these surfactants. The formation of micelles in organic solvents such as methanol and acetonitrile was successfully observed by the NMR method while it was difficult to study these surfactants in organic solutions by the pyrene fluorescence probe method. The NMR study revealed that the formation of micelles resulted in the decrease in all H‐1 spin lattice relaxation times (T₁) of hydrophobic groups, e.g. CH₃ and CH₂, and hydrophilic group OCH₂ of these surfactants. However, upon the micellar formation, the H‐1 chemical shifts (δ) of these surfactant hydrophobic groups were found to shift to downfield (increased δ) while the chemical shift of the hydrophilic group OCH₂ moved to up‐field. Comparison of the spin lattice relaxation time and H‐1 chemical shift methods was also made and discussed.     

Magnesium octa(benzo-15-crown-5)phthalocyaninate in the sodium dodecyl sulfate solutions: A study using electron and 1H NMR spectroscopy

The behavior of magnesium octa(benzo-15-crown-5)phthalocyaninate in water medium in the presence of sodium dodecyl sulfate was studied using both electronic and ¹H NMR spectroscopy, including the method of two-dimensional ¹H-¹H correlation NOESY. In the microheterogeneous environment of the CH₃(CH₂)₁₁OSO₃Na solutions at the concentrations of the latter close to the CMC the phthalocyanine is in monomeric form, while at the concentration less than the critical micelle-formation concentration it becomes a dimer or even more aggregated. The results of the NMR spectroscopic investigation indicate that magnesium octa(benzo-15-crown-5)phthalocyaninate preferrably binds to the CH₃(CH₂)₁₁OSO₃Na micelle in the hydrophobic region of the latter.     

Preparation of substituted ionic carbohydrate polymers and their interactions with ionic surfactants

The formation of micelles of hexadecyltrimethylammonium chloride (CTAC) and sodium dodecylsulfate (SDS) in aqueous solutions containing charged polysaccharides was studied by steady-state and time-resolved fluorescence measurements using pyrene as a photophysical probe. Micropolarity studies using the I₁/I₃ ratio of the vibronic emission bands of pyrene and the behaviour of the I_E/I_M ratio between the excimer and monomer emissions show the formation of hydrophobic domains. The interactions between the polyelectrolytes and surfactants of opposite charge lead to the formation of induced pre-micelles at surfactant concentrations lower than the critical micellar concentration (cmc) of the surfactants. At similar concentrations, the I_E/I_M ratio shows a peak. This aggregation process is assumed to be due to electrostatic attractions. At higher surfactant concentrations, near the critical micellar concentration, micelles with the same properties as those found in pure aqueous solution are formed. On the other hand, systems containing polyelectrolytes and surfactants of the same charge do not show this behaviour at low concentrations. The presence of long alkyl chains bound to the polyelectrolytes also induces the formation of free micelles at concentrations somewhat below the aqueous cmc.     

Enhanced Macroanion Recognition of Superchaotropic Keggin Clusters Achieved by Synergy of Anion–π and Anion–Cation Interactions

Keggin clusters are the most widely used polyoxometalate building blocks for the construction advanced materials, but effective methods for precisely recognizing the isostructural analogues of Keggins are still limited. In this study we employed the zwitterionic molecule 4,4′-dipyridyl N,N′-dioxide as a recognition receptor to specifically bind to the three Keggin analogues PW₁₂O₄₀³⁻, PMo₁₂O₄₀³⁻, and SiW₁₂O₄₀⁴⁻, which separately co-assembled into three different types of spherical charged colloids of different sizes. The recognition phenomena were confirmed by electrochemical methods and their crystallization behavior. Compared with solely anion–cation interaction-driven systems, the synergism with the anion–π interactions between the superchaotropic Keggins and the electron-deficient pyridine rings is believed to enhance the recognition. This observation is intriguing as the long-range solution assembly of Keggins is mainly driven by short-range anion–π interactions. Our results show that the little-noticed hydration shell of Keggins is significantly influenced by the superchaotropic effect, leading to differentiated binding affinity to the receptors and more obvious recognition phenomena between tungsten/molybdenum Keggin analogues.     

Ultrasound‐Driven Secondary Self‐Assembly of Amphiphilic β‐Cyclodextrin Dimers

The controlled secondary self‐assembly of amphiphilic molecules in solution is theoretically and practically significant in amphiphilic molecular applications. An amphiphilic β‐cyclodextrin (β‐CD) dimer, namely LA‐(CD)₂, has been synthesized, wherein one lithocholic acid (LA) unit is hydrophobic and two β‐CD units are hydrophilic. In an aqueous solution at room temperature, LA‐(CD)₂ self‐assembles into spherical micelles without ultrasonication. The primary micelles dissociates and then secondarily form self‐assemblies with branched structures under ultrasonication. The branched aggregates revert to primary micelles at high temperature. The ultrasound‐driven secondary self‐assembly is confirmed by transmission electron microscopy, dynamic light scattering, ¹H NMR spectroscopy, and Cu²⁺‐responsive experiments. Furthermore, 2D NOESY NMR and UV/Vis spectroscopy results indicate that the formation of the primary micelles is driven by hydrophilic–hydrophobic interactions, whereas host–guest interactions promote the formation of the secondary assemblies. Additionally, ultrasonication is shown to be able to effectively destroy the primary hydrophilic–hydrophobic balances while enhancing the host–guest interaction between the LA and β‐CD moieties at room temperature.     

Hexadecyltrimethylammonium bromide micellization in glycine,diglycine, and triglycine aqueous solutions as a function of surfactant concentration and temperatures

Micellization behavior of hexadecyltrimethylammonium bromide (HTAB) was investigated conductometrically in aqueous solutions containing 0.02 mol kg^?1glycine (Gly), diglycine (Gly-Gly), and triglycine (Gly-Gly-Gly) as a function of surfactant concentration at different temperatures. The critical micelle concentration (CMC) of HTAB exhibits a decreasing trend as the number of carbon atoms increases from Gly to Gly-Gly-Gly, favoring the micelle formation. The values of CMC and the degree of counterion dissociation of the micelles were utilized to evaluate the standard free energy for transferring the surfactant hydrophobic chain out of the solvent to the interior of the micelle, ΔG _HP ^○ , free energy associated with the surface contributions, ΔG _S ^○ , standard free energy, ΔG _m ^○ , enthalpy, ΔH _m ^○ , and entropy, ΔS _m ^○ of micellization were also calculated. The results show that the micellization of HTAB in aqueous solutions as well as in aqueous Gly/Gly-Gly/Gly-Gly-Gly solutions is primarily governed by the entropy gain due to the transfer of the hydrophobic groups of the surfactant from the solvent to the interior part of the micelle. The CMC obtained by fluorometric method is in close agreement with those obtained conductometrically. Furthermore, decrease in the I ₁/I ₃ ratio of pyrene fluorescence intensity suggests the solubilization of the additives by the surfactant micelles and that this solubilization increases as the hydrophobicity increases from Gly to Gly-Gly-Gly.     

Synthesis,thermo-responsive micellization and caffeine drug release of novel PBMA-<Emphasis Type="Italic">b</Emphasis>-PNIPAAm block polymer brushes

Brush-like block copolymers with poly(t-butyl methacrylate) (PBMA) and poly(N-isopropylacrylamide) (PNIPAAm) as side arms, PBMA-b-PNIPAAm, were designed and synthesized via a simple free radical polymerization route. The chemical structure and molecular weight of these polymer brushes were characterized and determined by nuclear magnetic resonance (¹H NMR), Fourier transform infrared spectrometry (FTIR) and gel permeation chromatography (GPC). The micellar formation by these polymer brushes in aqueous solutions were detected by a surface tension technique, and the critical micelle concentration (CMC) ranged from 1.53 to 8.06 mg L⁻¹. The morphology and geometry of polymer micelles were investigated by transmission electron microscope (TEM) and dynamic light scattering (DLS). The polymer micelles assume the regularly-spherical core-shell structure with well-dispersed individual nanoparticles, and the particle size was in the range from 36 to 93 nm. The PNIPAAm segments exhibited a thermoreversible phase transition, so the resulting block polymer brushes were temperature-sensitive and the low critical solution temperature (LCST) was determined by UV-vis spectrometer at about 28.82–29.40°C. The characteristic parameters of the polymer micelles such as CMC, micellar size and LCST values were affected by their compositional ratios and the length of hydrophilic or hydrophobic chains. The evaluation for caffeine drug release behavior of the block polymer micelles demonstrated that the self-assembled micelles exhibited thermal-triggered properties in controlled drug release.     

Influence of organic additives on the clouding phenomena of promethazine hydrochloride solutions

This paper reports the influence of organic additives (alcohols, amino acids, sugars) on the micellization and cloud point (CP) of a phenothiazine drug, promethazine hydrochloride (PMT). The critical micelle concentration (CMC) of the drug, determined by surface tension measurements in the presence of a representative of each additive class (i.e., butanol, leucine, arabinose), are used to evaluate the maximum surface excess concentration (Γ _max) and the minimum area per surfactant molecule (A _min) at the air/water interface. Γ _max increases and CMC/A _min decreases with increasing concentration of the additives, which indicate mixed micelle formation. The intermicellar interaction coefficients in the mixed micelles (β ^m and β ^σ are also calculated, and their negative values imply attractive interactions. Effect of pH revealed CP decrease with increasing pH due to deprotonation of PMT molecules. Effect of amino acids depended upon their nature and polarity, whereas sugars caused a CP decreasing effect. Aliphatic alcohols as well as cycloalkanols and diols decreased the CP. In the presence of arabinose, increase in drug concentration resulted in the CP increase, while increase in pH showed an opposite trend. Results are interpreted on the basis of mixed micelle formation, hydrophobic interactions, and change in solvent structure.     

Kinetics of metal ion complex formation in micellar media. A comparison between normal and polymerized micelles

Micellar media can be used to investigate the rate of complex formation between hydrophobic extractants and metal ions. Acceleration or retardation effects may be obtained, depending on factors such as the nature of the surfactant, the hydrophilic/lipophilic character and ionization state of the extractant, etc. The present work was aimed at studying the influence of some specific parameters in producing retardation effects, which have potential application for performing separation of metal ions on a kinetic basis. The stopped-flow technique was used to measure the rate of complex formation between Cu²⁺ and complexing agents with varying alkyl chain length. Micelles made of the nonionic surfactants C₁₂EO₆, Triton X-100 and Brij 35 were first considered, which did not show any direct correlation between the rate of complex formation and the thickness of the hydrophilic layer constituted by the polar heads of the surfactant molecules.In a second approach, we have used polymerized micelles obtained from undec-10-enyltrimethyl ammonium bromide, which we assumed to be more rigid than normal micelles. Although the absence of CMC was confirmed, the rates measured in these polymerized micelles were larger than those obtained in micellar solutions of CTAB and DTAB. The results are discussed in relation with the nature of the hydrophobic domains in the different situations.Institut Nancéien de Chimie Moléculaire (I.N.C.M.), FU CNRS n=8     

The aggregation ofn-dodecanephosphonic acid in water

Several techniques were employed to study the aggregation ofn-Dodecanephosphonic Acid (DPA) in water. At 22°C, the solubillity of DPA increases, probably due to the formation of small premicellar aggregates. The CMC is (5.4±2.4) ×10^–4 mol·dm^–3 and the solubility reaches the CMC value at 26°C. At 30°C and at a concentration of about 9×10^–3 mol·dm^–3, a lamellar mesophase appears. Both micelles and liquid crystal lamellae are almost uncharged. Their polar heads have strong hydrogen bonds between them. The ionization of DPA molecules in micelles and mesophase structures is strongly reduced in comparison with monomerically dissolved molecules.