Extraordinary ray refraction in a large pitch helical medium

The phenomenon of extraordinary ray refraction in a helical liquid crystal with large (compared to the light wavelength) pitch has been studied by theoretical and experimental methods. At a sufficiently large angle of incidence relative to the pitch axis, the extraordinary ray exhibits reflection (reversal) from a certain layer of the medium. The ordinary ray, for which the system is optically isotropic, exhibits no such reflection. The experimental dependences of the transmitted and reflected (reversed) rays are described using the geometrical optics approximation taking into account the optical losses for scattering inside the liquid crystal.     

Nonlinear-optical and micro-Raman diagnostics of thin films and nanostructures of ABO3 ferroelectrics

Ferroelectric composite two-dimensional ferroelectric/aluminum oxide nanostructures were studied. A porous aluminum oxide matrix was used as a template into which a ferroelectric precursor was introduced, followed by annealing. The prepared nanostructures were studied using optical second harmonic generation and micro-Raman scattering.     

The efficacy of tilted axial MRI of the CNS

The angle between the straight axial plane and the orbito-meatal line was measured in 156 consecutive magnetic resonance examinations. Inconsistent head positioning caused this angle to vary by as much as 44 degrees. Careful positioning of the patient by the technologist can minimize this variability, leading potentially to improved image interpretation. To assess the merit of a standardized orientation for MR examinations of the head, straight axial and tilted axial MR scans were compared in 34 patients. The tilted images were obtained parallel to the orbito-meatal line and were found to be superior for visualization of the cerebellum. When correlative x-ray CTs are available or when an abnormality in the posterior fossa is suspected, tilted axial MR scans should be employed.     

Strong, low-energy two-photon absorption in extended amine-terminated cyano-substituted phenylenevinylene oligomers

Three quadrupolar oligophenylenevinylenes with five rings in the conjugated backbone, terminal donor groups, and various acceptors and/or donors along the backbone were synthesized and their two-photon spectroscopic properties investigated. These chromophores exhibit large two-photon absorption cross sections over a wide wavelength range and two distinct peaks, the strongest of which (deltamax > 3600 GM) is observed at 960-970 nm, a wavelength close to twice the value of the linear absorption maximum (2lambda(1)max). The findings on these chromophores are compared with those for analogous molecules with shorter conjugation length, for which the main two-photon band is at significantly shorter wavelength than 2lambda(1)max.     

Direct quantitative determination of surface Brønsted acidity of solids by H/D exchange using D2O

A highly flexible method for direct and quantitative determination of surface Br?nsted acidity of solids in terms of number, type and strength of the acid sites based on quantitative H/D exchange kinetics between the acid solid and gaseous D2O has been developed and applied to materials covering the whole range of acidity.     

Polyelectrolyte multilayers and degradable polymer layers as multicompartment films

Polyelectrolyte multilayers are now a well established concept with numerous potential applications in particular as biomaterial coatings. To timely control the biological activity of cells in contact with a substrate, multicompartment films made of different polyelectrolyte multilayers deposited sequentially on the solid substrate constitute a promising new approach. In a first paper (Langmuir 2004, 20, 7298) we showed that such multicompartment films can be designed by alternating exponentially growing polyelectrolyte multilayers acting as reservoirs and linearly growing ones acting as barriers. In the present study, we first demonstrate however that these barriers composed of synthetic polyelectrolytes are not degraded despite the presence of phagocytic cells. We propose an alternative approach where exponentially growing poly(L-lysine)/hyaluronic acid (PLL/HA) multilayers, used as reservoirs, are alternated with biodegradable polymer layers consisting in poly(lactic-co-glycolic acid) (PLGA) and acting as barriers for PLL chains that diffuse within the PLL/HA reservoirs. We first show that these PLGA layers can be deposited alternatively with PLL/HA multilayers leading to polyelectrolyte multilayer/hydrolyzable polymeric layer films and acting as a reservoirs/barriers system. Bone marrow cells seeded on these films ending by a PLL/HA reservoir rapidly degrade it and internalize the PLL chains confined in this reservoir. Then the cells degraded locally the PLGA barrier and internalize the PLL localized in a lower (PLL/HA) compartment after 5 days of seeding. By changing the thickness of the PLGA layer, we hope to be able to tune the time delay of degradation. Such mixed architectures made of polyelectrolyte multilayers and hydrolyzable polymeric layers could act as coatings allowing us to induce a time scheduled cascade of biological activities. We are currently working on the use of comparable films with compartments filled by proteins or peptides and in which the degradation of the barriers results from a hydrolysis over tunable time scales.     

Full verification of the liquid exclusion-adsorption chromatography theory using monolithic capillary columns

Capillary electrochromatography (CEC) was used to separate alkyl phenol ethoxylates (APEs) as model diblock copolymers, with monolithic polymers as stationary phases. The order of elution indicate that the two polymer blocks follow distinct chromatographic modes: size-exclusion for the poly(oxyethylene) group and adsorption interaction for the alkyl part. Therefore, our experimental results were compared to the theory describing liquid exclusion-adsorption chromatography (LEAC). They were found in perfect agreement with the theory, which turned to be verified for the first time over the full range of polymer lengths.     

Determination of terbinafine in pharmaceuticals and dialyzates by capillary electrophoresis

A capillary electrophoresis method has been developed for the separation and determination of terbinafine (TER) in various pharmaceutically relevant matrices. Capillary zone electrophoresis (CZE) separation and UV absorbance photometric detection were carried out in a 160 mm capillary tube with a 300 μm i.d., hydrodynamically (membrane) closed. The influences of pH, carrier cation and counterion on migration parameters of TER were studied and the following conditions were selected: a 20 mmol l⁻¹ glycine running buffer adjusted to pH 2.7 with acetic acid, 0.2% (w/v) methylhydroxyethylcellulose (m-HEC) as an electro-osmotic flow (EOF) suppressor, a 250 μA driving current, and 20 °C. The optimized separation conditions were convenient for the determination of TER in commercial tablets and spray and in dialyzates. Here, the dialysis was used to investigate in vitro permeation of TER through the skin from the gel. The samples of dialyzates were examined with and without simple extraction procedure and the results were compared. A permeation profile of the drug present in the gel of given composition was obtained analyzing pretreated samples. The proposed electrophoretic method was successfully validated. It was suitable for the simple, sensitive, rapid and highly reproducible assay of TER. CZE analysis was completed within 5.5 min. The detection limit of TER was 1.73 μmol l⁻¹ at a 224 nm detection wavelength. The intra- and inter-laboratory precisions over the concentration range 6.0-60.0 μmol l⁻¹ were between 0.32-0.69% and 1.04-1.44% including R.S.D. of migration times and peak areas, respectively. The mean absolute recoveries of drugs from samples were found to be 98.34 (tablets) and 99.47% (spray). It is suggested that there are potentialities to determine TER present in unpretreated complex samples, as CZE in a hydrodynamically closed separation system may be easily on-line combinable with purification and preconcentration CE modes (e.g., isotachophoresis, ITP).     

Structure analysis of intercalated layer silicates: combination of molecular simulations and experiment

Na(+)-montmorillonite type Wyoming, cloisite Na(+) from Southern Clay Products, Inc., was intercalated (i) with octadecylammonium cations and subsequently intercalated with octadecylamine molecules, (ii) with dodecylamine molecules, and (iii) with octylamine molecules to determine the applicability of these intercalates for nanocomposite materials on the base of polymer/clay. The structures were determined on the basis of a combination of results from X-ray diffraction and molecular simulations. The calculated values of basal spacings are in good agreement with experimental basal spacings when experimental samples were prepared. The interlayer space of intercalated montmorillonite shows a monolayer or bilayer arrangement of alkyl chains in dependence on the concentration of the intercalation solution. The values of the total sublimation energy, interaction energy, and exfoliation energy were calculated for all investigated samples. Low values of exfoliation energies lead to better exfoliation of intercalated silicate layers and this material appears suitable for use as a precursor for polymer/clay nanocomposites. The values of exfoliation energy for the investigated samples show that montmorillonite intercalated with dodecylamine or octadecylamine molecules is suitable for exfoliation of silicate layers.     

PFGSE-NMR study of the self-diffusion of sucrose fatty acid monoesters in water

The micellization of pure monosubstituted sucrose fatty acid esters in water, namely sucrose octanoate, sucrose decanoate, sucrose laurate, sucrose dodec-5-cis-enoate, sucrose myristate, and sucrose palmitate, has been investigated by means of two NMR methods, pulsed field gradient spin-echo NMR (PFGSE-NMR), giving access to the self-diffusion coefficients of free molecules and micelles in solution, and the ERETIC method (electronic reference to access in vivo concentrations) for the measurement of concentrations by external calibration of a synthetic NMR signal. The early micellar regions and, when possible, the premicellar regions were investigated. By this method, we obtained the hydrodynamic radii of micelles, displaying a linear progression in relation to the chain length and an accurate determination of critical micellar concentration (CMC) for each sucrose ester. The effect of the regiochemistry of fatty chain grafting has been investigated, showing special behavior for 1'-O-sucrose palmitate.