新型红色荧光粉Sr3Al2O6的合成和发光性能研究

稀土金属离子激活的多铝酸盐发光材料，在可见光区具有较高的量子效率犤１～４犦，充分显示出这类荧光发光材料，在高效节能、环保、电光源与新一代可见光显示器领域的应用前景犤４～９犦。特别是SrAl２O４∶Eu２＋的持续发光现象的发现犤２，３犦，激起了对以稀土金属离子为激活剂，碱土铝酸盐为基质的长余辉无机发光材料体系的兴趣。研究表明其发光强度和余辉时间是传统硫化物发光材料的十倍以上，利用其长余辉储光－发光特性，有望开发新型发光油漆、涂料、发光陶瓷、发光塑料、薄膜、发光纸、发光纤维犤４犦。早在七十年代，荷兰菲利…     

[(2,2''''-bipy)_2VO_2](H_2BO_3)·3H_2O的水热合成和晶体结构

有机-无机杂化钒氧配合物的合成研究越来越引起人们浓厚的兴趣,这是由于它新颖的结构和在催化、电化学、光化学、吸附、离子交换和磁性能方面具有潜在的应用前景犤1～8犦。功能体系的有机-无机杂化材料的构筑取决于反应物相互作用的本性。近年来,将有机胺分子作为结构导向剂引入无机骨架中,获得了一系列结构新颖的化合物犤9,10犦。它们通过共价键和(或)氢键自组装成零维、一维、二维和三维网络犤11,12犦。例如零维的犤(N2C6H14)2VO(PO3OH)4(B3O3OH)犦犤13犦、一维钒氧链犤Cu(dien)V2O6犦犤11犦,犤Cu(NH3)2V2O6犦犤14犦,犤狖Co(phen…     

SiO2凝胶中间甲基苯甲酸铕-邻菲罗啉配合物的热稳定性及发光性能

溶胶-凝胶法(sol-gel)以其温和的反应条件和灵活多样的操作方式成为制备新型荧光材料的合适方法,它可以在低温下制备均匀掺杂光学活性物质的高熔点氧化物玻璃,为无机玻璃在激光、非线性光学技术领域的应用开拓了新的思路,也为许多新型光学材料的应用开发和改良提供了新的途径.很多稀土有机配合物具有很好的发光性能,但因其热稳定性较差而限制了它们的实际应用.近年来已有含稀土二元配合物凝胶发光性能的研究报道[1～4],本文采用溶胶-凝胶法将铕-间甲基苯甲酸-邻菲罗啉三元配合物引入SiO2基质中制成新的透明复合发光材料,对其热稳定性和发光…     

邻氨基苯甲酸/SiO2复合材料制备及其光热特性

有机发光体以其较高的发光效率、快速响应能力和较宽的可调谐波长被广泛应用于光转换材料、非线性光学材料和激光材料[1-3]。但是有机物的光学性能不稳定和热稳定性较差,使其在许多方面的应用受到限制。为了提高其光学和热稳定性,常用的方法是将各种有机发光体掺杂在以正硅酸乙酯为原料制得的SiO2凝胶玻璃基质中[4-6]。SiO2凝胶通常采用溶胶 凝胶法通过水解缩合制备。制备时一般采用无机酸作催化剂在酸性条件下进行,对质子酸作用敏感的有机物在酸性条件下往往热稳定性、光学性能下降,甚至遭到破坏。本文以廉价水玻璃为原料,在潜伏酸的…     

油溶性金属Ni纳米微粒的制备与表征

纳米材料的制备、性能与应用已成为近年来的研究热点之一犤１犦。由于在催化、光学和电学材料中的广泛应用，超细单分散的金属微粒的制备与性质已引起人们的广泛兴趣。通常制备金属纳米微粒的方法有两种：一是把固体金属材料分裂为纳米尺寸的颗粒，如机械粉碎、电弧放电及金属原子蒸气沉积犤２犦，用这种方法制备的金属微粒粒径一般都比较大，且粒子尺寸分布宽，另一种是把金属原子制成纳米尺度的颗粒，如乳液聚合法犤３犦、热解犤４犦、γ－射线辐照犤５犦、脉冲电沉积犤６犦和化学还原犤７犦等，这种方法制备的微粒粒径通常分布窄且粒子小…     

过渡金属一取代Keggin结构钼磷酸盐掺杂的聚吡咯的制备、表征与导电性研究

０引言有机高分子－多酸导电聚合物是８０年代末兴起的一类新型有机－无机杂化材料。由于它兼有无机组分和有机聚合物基块的性能，并能衍生出新的导电性、光学性、耐摩擦、力学性能、功能梯度等，它现已成为材料科学和化学科学研究的前沿课题之一犤１犦。多酸是一类含有氧桥的多核配合物，具有强酸性、强氧化性、优良的催化活性、光致变色、电致变色性及高质子导电性等，可作为构建有机－无机杂化材料的基块犤２，３犦。聚吡咯是一类有机高分子，其合成简便、空气稳定性好、易于掺杂，通过掺杂可形成高电导率的高分子材料。若将多酸掺杂聚吡…     

曙红Y在介孔分子筛MCM-41膜及粉体中的封装及发光性质研究

由于分子筛材料在催化、吸附、气相分离、电极、传感器和光电子器件等方面有着潜在的应用前景[1-3] ,结构有序并且具有良好稳定性的分子筛膜材料的制备受到人们广泛关注［4-6],将一些功能有机分子封装于薄膜中制得具有特殊光学性质的材料具有实际应用价值[7-8] ．在以往的研究中,曙红Y被引入到有机聚合物膜［9]和无机氧化物粉体［10]中并测定了该复合材料的光学性质,但将其引进具有规则孔道结构及狭窄孔分布的无机微孔材料中的研究尚未见报道．本文通过共混方法成功地将曙红Y引入到具有较大孔径及规则孔结构的介孔分子筛MCM－41膜及粉体中,利用X射线粉末衍射和紫外漫     

超声电化学制备PbSe纳米枝晶

近年来，纳米晶态半导体粒子因其具有大的表面体积比、高的活性、特殊的电学性质和独特的光学性质引起了科学界的广泛关注犤１，２犦。基于半导体纳米粒子的量子尺寸效应和表面效应，半导体纳米粒子在发光材料犤３犦、非线性光学材料犤４犦、光敏传感器材料犤５犦、光催化材料犤６犦等方面具有广阔的应用前景。如何实现对半导体纳米粒子的尺寸大小、粒度分布以及形状和表面修饰的控制，寻找更简便的合成方法以及改善制备环境等是半导体纳米粒子研究的关键。超声电化学是结合了电化学和超声辐照而建立起来的一种新方法，它显示了两者的优点犤…     

有机基质在仿生材料合成中的应用

利用有机基质的模板作用通过仿生合成可以制备出性能优异的无机材料。文章综述了两亲有机分子、有机高分子、生物大分子三种有机基质在仿生材料合成中的应用 ,并对仿生材料合成这一新兴研究领域的发展趋势及广阔前景作了进一步的展望。     

测接触角法确定偶联剂的最佳用量

偶联剂是一类能在无机填料和聚合物基材之间形成“分子桥”、改善两者之间相容性或提高两者之间相互作用能力的化合物。将经偶联剂改性的无机填料填充到聚合物中可以制得成本低、性能好的复合材料。由于偶联剂用量多少将对复合材料的性能产生较大影响,因此建立一种准确、简便地确定偶联剂最佳用量的方法有着十分重要的理论和实际应用意义。     

Study of the effect of ligands on the fluorescence properties of terbium ternary complexes

Four ternary complexes of Tb(III) were synthesized by introducing the first ligand (L₁) (N-phenylanthranilic acid (N-HPA), α-furoic acid (FURA)) and the second ligand (L₂) (1,10-phenanthroline (Phen), 2,2′-dipyridyl (Bipy)), respectively. These complexes were characterized by elemental analysis, infrared spectra, XRD, UV spectra and fluorescence spectra. The effect of L₁ and L₂ on the fluorescence properties of terbium complexes was discussed. It showed that all the complexes exhibited ligand-sensitized green emission. The fluorescent intensity increased in the sequence of Tb(FURA)₃Bipy < Tb(N-PA)₃Phen < Tb(FURA)₃Phen < Tb(N-PA)₃Bipy. It indicated that L₁ affected fluorescence properties of the complexes differently when the corresponding L₂ altered. Meanwhile, the influence of L₂ on the luminescence properties of the complexes also depends on L₁. The results showed that L₁ and L₂ affected each other and worked together as a whole. The matching of L₁, L₂ and Tb³⁺ ion is very important to the luminescence properties of Tb(III) ternary complexes.     

SiO<Subscript>2</Subscript>–TiO<Subscript>2</Subscript> xerogels for tailoring the release of brilliant blue FCF

Xerogels consisting of SiO₂ and TiO₂ were explored for controlled release of brilliant blue FCF (BBF). Both SiO₂ and SiO₂–TiO₂ xerogels were prepared by way of sol–gel processing, and the BBF release behavior was compared. SiO₂–TiO₂ xerogels with varying TiO₂ content were also studied and the BBF release behavior was determined for each SiO₂–TiO₂ xerogel. It was found that the release of BBF from SiO₂ xerogels can be increased by the addition of TiO₂ content, and the amount and rate of BBF released from the SiO₂–TiO₂ xerogels can be changed by modifying the amount of TiO₂ included during the preparation of the xerogels, where the SiO₂–TiO₂ xerogels with a higher content of TiO₂ released a higher fraction of BBF in water media when compared to the release from SiO₂–TiO₂ xerogels with lower amounts of TiO₂. The experimental results have to be explained by a combination of porous structure, in situ dissolution–condensation during the BBF elution and the change of surface chemistry of the xerogel network with the addition of TiO₂.     

Preparation of poly(methyl methacrylate)/CaCO3/SiO2 composite particles via emulsion polymerization

A novel method to prepare organic/inorganic composite particles, i.e. poly(methyl methacrylate)/CaCO₃/SiO₂ three-component composite particles, using emulsion polymerization of methyl methacrylate with sodium lauryl sulfate as a surfactant in an aqueous medium was reported. CaCO₃/SiO₂ two-component inorganic composite particles were obtained firstly by the reaction between Na₂CO₃ and CaCl₂ in porous silica (submicrometer size) aqueous sol and the specific surface area of the particles was measured by the Brunauer–Emmett–Teller (BET) method. The results show that the BET specific surface area of the CaCO₃/SiO₂ composite particle is much smaller than that of the silica particle, indicating that CaCO₃ particles were adsorbed by porous silica and that two-component inorganic composite particles were formed. Before copolymerization with methyl methacrylate, the inorganic composite particles were coated with a modifying agent through covalent attachment. The chemical structures of the poly(methyl methacrylate)/CaCO₃/SiO₂ composite particles obtained were characterized by Fourier transform IR spectroscopy and thermogravimetric analysis. The results show that the surface of the modified inorganic particles is grafted by the methyl methacrylate molecules and that the grafting percentage is about 15.2%.     

SiO2/ZnO复合纳米粒子的制备及表征

采用双注控制沉积法(Controlled Double-Jet Precipitation,CDJP)将反应物添加到含有SiO₂的溶液中,通过直接的表面反应来制备单分散的SiO₂/ZnO复合纳米粒子,并对其进行了表征。透射电镜(TEM)观察表明,SiO₂表面有一层ZnO纳米颗粒或薄层。对复合纳米粒子SiO₂/ZnO进行X射线衍射(XRD)分析,复合颗粒的衍射峰与单独的氧化锌的衍射峰完全一致。能量弥散X射线法(EDX)分析表明,复合颗粒中含有Zn、Si、O元素。荧光光谱表明有ZnO的吸收峰。     

Novel fluorescence nanostructured materials obtained by entrapment of an ornamental bush extract in hybrid silica glass

Synthesis of some novel fluorescence nanomaterials loaded with photoactive polyphenols originated from plants with a high spectrum of biological activity, by replacing synthetic chemicals, may open new opportunities for optical and bio-medical applications. This paper presents the synthesis, characterization and fluorescence properties of a new class of materials based on host hybrid matrices obtained through templated sol–gel route, by hydrolysis and co-condensation of tetraorthoethylsilicate with octaisobutyltetracyclo [7.3.3.1^5,11] octasiloxane-endo-3,7-diol. The aim of paper is focused on the evaluation of the behavior of the fluorescence properties of ornamental bush extract at immobilization in a templated silica matrix and in a silica-silsesquioxane network, using as templates a neutral, non-toxic and biodegradable surfactant from poly(ethyleneglycol) class and a high biocompatible non-surfactant from glucidic class. The proofs of ornamental bush extract entrapment by physical interactions in silica based networks were provided by FT-IR and UV–VIS spectroscopy. The changes of polymer network due to the hydrogen bond interactions between residual Si–OH groups and functional groups of organic molecules from extract were evidenced by shifts of specific vibrations. In UV–VIS-NIR domain, the chromophore groups from ornamental bush extract were also evidenced by similar small shifts. As a result of ornamental bush extract entrapment, in all the immobilized samples the fluorescence intensity was more than 10 times amplified in samples templated with poly(ethylenglycol) surfactant) and of about 5 times in samples with glucidic template due to the physical adsorption of polyphenolic molecules from extract, excellent synergistic optical properties of SiO₂ and silsesquioxane compound and also due to a favorable conformational arrangement. The size of synthesized polymeric materials, estimated by dynamic light scattering technique showed main diameters less then 1.4 μm, namely 1,060 and 211 nm—for samples with d-glucose template and 1,330 and 531 nm—for samples with poly(ethyleneglycol) template, respectively, with a narrow size distribution and a polidispersity varying between 0.022 and 0.426. These results are in good accordance with TEM images that evidenced the presence of some polymeric aggregates which contain the vegetal extract immobilized inside hybrid SiO₂-Sq polymeric network of about hundred nanometers size. This study bring new contributions to the development of the sol–gel procedure by entrapment of a complex vegetable mixture in polymeric matrices as integral component of silica and hybrid silica-silsesquioxane networks which leads to a significant enhancement of the functional properties of the final material, thus diversifying the potential applications of organic doped sol–gel glasses.     

Preparation of Cu/SiO2 Catalyst by Solution Exchange of Wet Silica Gel

Structural formation process of Ni/SiO₂ and Cu/SiO₂ catalysts prepared by solution exchange of wet silica gel was investigated. Microstructures of Cu/SiO₂ and Ni/SiO₂ were quite different from each other. In the case of Cu/SiO₂, Cu particles with diameter of ca. 3–5 nm dispersed homogeneously at less Cu content, and the particle size of Cu as well as pore size of silica gel support increased with increasing Cu content. In the Ni/SiO₂, the Ni particles with diameter of ca. 6–10 nm gathered densely to form aggregates in silica matrix resulting in sea-island structure, whereas the size of Ni particle slightly increased with increasing Ni content. The difference in the structure of the metal-silica composites is probably caused by the difference in interaction between silica gel network and metal ions during drying and heating processes.     

表面活性剂模板在空气-水界面ZrO2薄膜中的稳定性

采用模板——十二烷基苯磺酸(DBS-H)在空气-水界面组装ZrO₂薄膜，研究了DBS-H在ZrO₂自组装薄膜中的水溶性、化学稳定性、热稳定性和光化学稳定性。模板的各类稳定性将直接控制ZrO₂薄膜结构，主要表现在层间距变化上。从模板与Na₂SiO₃反应的研究中获得了一种制备ZrO₂ / SiO₂复合氧化物薄膜的新方法，并推测出该复合薄膜的结构。     

Synthesis of nanosized TiO2/SiO2 particles using microwave processes and their photocatalytic activity on the decomposition of orange II

The nanosized titania and TiO₂/SiO₂ particles were prepared by the microwave-hydrothermal method. The effect of physical properties TTIP/TEOS ratio and calcination temperature has been investigated. The major phase of the pure TiO₂ particle is of the anatase structure, and a rutile peak was observed above 800°C. In TiO₂/SiO₂ particles, however, no significant rutile phase was observed, although the calcination temperature was 900°C. No peaks for the silica crystal phase were observed at either silica/titania ratio. The crystallite size of TiO₂/SiO₂ particles decreases as compared to pure TiO₂ at high calcination temperatures. The TiO₂/SiO₂ particles show higher activity on the photocatalytic decomposition of orange II as compared to pure TiO₂ particles.     

Preparation and characterization of CuO/SiO2 and NiO/SiO2 with bimodal pore structure by sol-gel method

CuO/SiO₂ and NiO/SiO₂ with bimodal pore structure were prepared by sol-gel reactions of Tetra-methoxysilane (TMOS) and the respective metal nitrate in the presence of poly (ethylene oxide) (PEO) with an average molecular weight of 10 000 and the catalyst of acetic acid. In this process, the interconnected macroporous morphology was formed when transitional structures of spinodal decomposition were frozen by the sol-gel transition of silica. The addition of copper and nickel into the silica-PEO system had a negligible effect on the morphology formation. In gel formation, it was found that NiO crystalline sizes in the samples increased with decreasing Si/Ni molar ratio. It was considered that PEO interacted with both silica and nickel cations. In the CuO/SiO₂ with the presence of PEO_, CuO crystalline sizes were larger than those of NiO/SiO_2. It was considered that there was no obvious interaction between the Cu cation and PEO, most of the copper ions in wet silica gel were present in the outer solution. They easily aggregated as copper salts in the drying process of wet gel and decomposed into CuO particles in heating. While in the CuO/SiO₂ with the absence of PEO, the Cu was selectively entrapped as small particles in the gel skeleton due to the interaction between Cu aqua complex and silica gel network.     

Study on parylene/SiO<Subscript>2</Subscript> composite films for protection of KDP crystals

In this paper, parylene/SiO₂ composite films were reported to protect KDP crystals, indispensable cells in ICF experiments, from moisture. FTIR, UV-NIR spectra and XPS were used to analyze the properties of films. Laser damage threshold of films was also measured. With porous silica coating on surface of parylene film, the transmittance of dual layers can be raised to more than 91%. KDP crystals with poly(p-xylylene)/SiO₂ coating could work well in ambient atmosphere for more than half a year.