甲酰胺溶剂中溶质间的过量Gibbs自由能相互作用参数

利用气液色谱方法测定了２９８．１５Ｋ时若干非电解质溶质在甲酰胺－乙酰胺、甲酰胺－尿素、甲酰胺－高氯酸钠固定液中的保留参数，采用ＭｃＭｉｌａａｎ－Ｍａｙｅｒ理论，将溶液热力学过量性质与溶液中粒子的对相互作用，参相互作用参数相联系，利用热力学方法求得了溶质的保留参数与Ｇｉｂｌｓ自由能相互作用参数的关系，并就溶质－溶质间的相互作用及溶剂性质的影响进行了讨论。     

水溶液中氯化铯与糖(D-葡萄糖、D-果糖和蔗糖)相互作用的热力学参数研究(298.15K)

用钾离子选择性电极为测量电极,氯离子选择性电极为参比电极,设计组成无液接电池,用于氯化铯-糖(葡萄糖、果糖及蔗糖)-水三元体系中组分之间弱相互作用的热力学性质研究.通过测量电池的电动势获得氯化铯在糖水溶液中的活度系数,根据Scatchard理论推测出糖在氯化铯水溶液中的活度系数.通过Mcmillan-Mayer理论将体系的过量热力学函数与溶液中溶质的相互作用参数相关联,获得氯化铯与糖在水溶液中相互作用的吉布斯自由能参数及盐效应常数.运用结构相互作用模型、糖的羟基水化效应及色散能理论,探讨体系中溶质-溶质、溶质-溶剂间的相互作用及糖的立体结构和金属离子体积对热力学参数的影响.     

四元系溶液中溶质间的Gibbs自由能相互作用参数的研究

用气液色谱法测定２９８．１５Ｋ下，有机溶质在尿素＋高氯酸钠＋甲酰胺固定液中的保留参数，用ＭｃＭｉｌｌａｎ－Ｍａｙｅｒ理论，将溶液的势力学过量性质与溶液中粒子间的对相互作用、三相互作用参数相联系，用热力学方法求得该四元体系中溶质的气液色谱保留参数与Ｇｉｂｂｓ自由能相互作用参数的联系，并就溶质间的相互作用及混合溶剂性质的影响进行了讨论。     

液-固吸附体系中计量置换吸附模型的热力学研究

研究了液-固吸附体系中溶质计量置换吸附过程中的自由能变,推导出了新的表示溶质种类、溶质浓度和溶剂对Gibbs自由能变贡献的数学表达式,并阐明了该表达式中各种参数的物理意义.将用通常方法测定的自由能变分为与溶质吸附和溶剂解吸附有关的两个独立的自由能变,推导出了液-固吸附体系中溶质计量置换吸附模型的两个线性参数β_a和q/Z对绝对温度倒数的线性关系,又将吸附过程中溶质的焓变和熵变分成两个独立的分量.用文献中的实验数据,对本文推导出的公式进行了检验,理论结果与实验结果一致.     

葡萄糖与醇在甲酰胺溶液中的焓相互作用参数

利用量热法测定了298.15K时葡萄糖在一些醇(甲醇、乙醇、1-丙醇、1-丁醇)与甲酰胺的混合溶剂中的溶解热.采用McMilan-Mayer方法,将溶液热力学过量性质与溶液中粒子的相互作用参数相关联,求得了粒子间的焓对相互作用参数和三分子相互作用参数,并就溶质-溶质间的相互作用及溶剂的影响进行了讨论.     

水溶液中溶质标准生成Gibbs自由能的洽合关系

本文结合若干实例,详细讨论了不同类型的溶质在水溶液中溶解前后的标准生成Gibbs自由能之间,以及在水溶液中相关溶质的标准生成Gibbs自由能之间的洽合关系.     

水溶液中氯化钠-单糖的焓和熵相互作用参数

利用改进的精密半微量热量计精确测定了氯化钠水溶液和一些单糖(葡萄糖、半乳糖、木糖、阿拉伯糖和果糖)水溶液的稀释焓以及氯化钠水溶液与这些单糖水溶液的的混合焓。计算了氯化钠从水到糖-水溶液中的摩尔迁移焓及氯化钠-单糖在水溶液中的焓相互作用参数。结合Gibbs自由能参数得到了熵相互作用参数。这些结果揭示了糖和氯化钠相互作用与糖的立体化学的依赖关系。这些相互作用参数能够识别糖的立体化学结构。     

稀溶液正则系综的计算机模拟——核酸硷基腺嘌呤溶液的热力学量的蒙特卡罗计算

本文根据正则系综(T,V,N)的统计力学的蒙特卡罗方法,提出了在溶剂化过程中由于溶质分子和溶剂分子相互作用而引起正则系综中亥姆霍兹自由能(功函)A 变化的理论计算。并通过改进的分子间相互作用势,对核酸硷基腺嘌呤稀溶液进行蒙特卡罗模拟处理,求得在溶剂化过程中由于腺嘌呤分子与水分子相互作用而引起亥姆霍兹自由能(功函)、热焓、内能和构型熵的变化,以及包括溶剂分子间(水分子间)、溶质分子、溶剂分子之间相互作用总能量的正则平均。     

葡萄糖与醇在甲酰0胺溶液中的焓相互作用参数

利用量热法测定了298．15K时葡萄糖在一些醇（甲醇、乙醇、1－丙醇、1－丁醇）与甲酰胺的混合溶剂中的溶解热。采用McMillan-Mayer方法,将溶液热力学过量性质与溶液中粒子的相互作用参数相关联,求得了粒子间的焓对相互作用参数和三分子相互作用参数,并就溶质－溶质间的相互作用及溶剂的影响进行了讨论。     

新型二氟甲基磷酸类酪氨酸蛋白磷酸酯酶1B抑制剂的分子动力学模拟和结合自由能计算

通过分子对接建立了一系列含二氟甲基磷酸基团(DFMP)或二氟甲基硫酸基团(DFMS)的抑制剂与酪氨酸蛋白磷酸酯酶1B(PTP1B)的相互作用模式, 并通过1 ns的分子动力学模拟和molecular mechanics/generalized Born surface area (MM/GBSA)方法计算了其结合自由能. 计算获得的结合自由能排序和抑制剂与靶酶间结合能力排序一致; 通过基于主方程的自由能计算方法, 获得了抑制剂与靶酶残基间相互作用的信息, 这些信息显示DFMP/DFMS基团的负电荷中心与PTP1B的221位精氨酸正电荷中心之间的静电相互作用强弱决定了此类抑制剂的活性, 进一步的分析还显示位于DFMP/DFMS基团中的氟原子或其他具有适当原子半径的氢键供体原子会增进此类抑制剂与PTP1B活性位点的结合能力.     

气液色谱法研究Ni[(C8H17)O)2PS2]2与脂肪胺加合反应的热力学性质

The equilibium constants of acid-base interaction between Mi(Octyl_dtp)_2 and alkylamine were determined by GLC method at several temperatures. Thermodynamic parameters △H and △S were evaluted as follows:ethylamine: △H=-11.5kJ mol~(-1) △S=-22.7J K~(-1) mol~(-1)diethylamine: △H=-18.1kJ mol~(-1) △S=-42.1J K~(-1) mol~(-1)The variations of logK versus temperature fit following equations:ethylamine: lgK=-1.19+598.9/Tdiethylamine: lgK=-2.20+945.6/T     

聚丙烯酰胺超高相对分子质量测量不确定度评定

根据SY/T 5862–2008聚丙烯酰胺相对分子质量测量方法,测量了超高分子量聚丙烯酰胺的相对分子质量。经过对聚丙烯酰胺相对分子质量测量过程引入的不确定度进行分析和评定,不确定度的来源主要是试样目标液配制过程中引入的不确定度,其次是相对分子质量测量重复性、试样固含量的测定以及温度所引入的不确定度。聚丙烯酰胺相对分子质量测定结果为(2500.6±32.6)×104,k=2。     

两种络合剂对Ce-Sn-O复合氧化物结构与性能的影响

分别以柠檬酸、葡萄糖为络合剂, 用溶胶-凝胶法制备了CeO2和掺杂少量Sn的Ce-Sn-O复合氧化物, 利用XRD、TPR、FT-IR、比表面法、TEM等方法表征了四种催化剂的物理化学性质, 同时以甲烷催化燃烧反应为探针对其进行了活性评价. 结果表明, 以葡萄糖为络合剂合成的掺杂锡后的样品其甲烷完全转化温度较低, 比表面积较大, 通过透射电子显微镜观察, 平均晶粒大小为14 nm 左右, 且分散性良好, 而相比之下柠檬酸为络合剂合成的样品出现明显的团聚现象.     

Isobaric (vapour + liquid) equilibria for sulfolane with toluene, ethylbenzene, and isopropylbenzene at 101.33 kPa

Isobaric (vapour + liquid) equilibrium data have been measured for the (toluene + sulfolane), (ethylbenzene + sulfolane), and (isopropylbenzene + sulfolane) binary systems with a modified Rose-Williams still at 101.33 kPa. The experimental data of binary systems were well correlated by the non-random two-liquid (NRTL) and universal quasi-chemical (UNIQUAC) activity coefficient models for the liquid phase. All the experimental results passed the thermodynamic consistency test by the Herington method. Furthermore, the model UNIFAC (Do) group contribution method was used. Sulfolane is treated as a group (TMS), the new group interaction parameters for CH₂–TMS, ACH–TMS and ACCH₂–TMS were regressed from the VLE data of (toluene + sulfolane) and (ethylbenzene + sulfolane) binary systems. Then these group interaction parameters were used to estimate phase equilibrium data of the (isopropylbenzene + sulfolane) binary system. The results showed that the estimated data were in good agreement with the experimental values. The maximum and average absolute deviations of the temperature were 4.50 K and 2.39 K, respectively. The maximum and average absolute deviations for the vapour phase compositions of isopropylbenzene were 0.0237 and 0.0137, respectively.     

氨基酸在水或氯化钾水溶液中体积性质的研究

在298.15K和常压下利用密度法测定了十几种α-氨基酸在水或氯化钾水溶液中的表观摩尔体积, 由此得到了各氨基酸的偏摩尔体积和其相应的转移偏摩尔体积,以及氨基酸中侧链对其偏摩尔体积的贡献值。从理论上计算了各氨基酸在上述溶液浓度的增加而增大; 氨基酸共溶质间的相互作用以1:1形式为主; 氨基酸的水化数随盐浓度的增加而减小。对所得结果进行了定性讨论。     

Design,Synthesis and Antitumor Activity of Asymmetric Bis(s‐triazole Schiff‐base)s Bearing Functionalized Side‐Chain

1‐Amino‐2‐pyrid‐3‐yl‐5‐(2‐benzoylethylthio)‐s‐triazole ( 1 ) was condensed with 1‐amino‐3‐mercapto‐5‐ [(un)substituted phenyl]‐s‐triazoles and subsequently substituted with chloroacetic acid to afford bis‐s‐triazole sulfanylacetic acid mono‐Schiff bases ( 3a – 3e ), which were condensed with 9‐formylanthracene to produce asymmetric bis(s‐triazole Schiff base) sulfanylacetic acids ( 4a – 4e ). The structures of new synthesized compounds were characterized by elemental analysis and spectral data, and their in vitro antitumor activity against L1210, CHO and HL60 cell lines was evaluted via the respective IC₅₀ values by methylthiazole trazolium (MTT) assay.     

Group additivity values for enthalpies of formation (298 K), entropies (298 K), and molar heat capacities (300 K < T < 1500 K) of gaseous fluorocarbons

A group additivity method was developed to estimate standard enthalpies of formation and standard entropies at 298 K of linear radical and closed-shell, gaseous fluorocarbon neutrals containing four or more carbon atoms. The method can also be used to estimate constant pressure molar heat capacities of the same compounds over the temperature range 300 K to 1500 K. Seventeen groups and seven fluorine–fluorine interaction terms were defined from 12 fluorocarbon molecules. Interaction term values from Yamada and Bozzelli [T. Yamada, J.W. Bozzelli, J. Phys. Chem. A 103 (1999) 7373–7379] were utilized. The enthalpy of formation group values were derived from G3MP2 calculations by Bauschlicher and Ricca [C.W. Bauschlicher, A. Ricca, J. Phys. Chem. A 104 (2000) 4581–4585]. Standard entropy and molar heat capacity group values were estimated from ab initio geometry optimization and frequency calculations at the Hartree–Fock level using the 6-31G(d) basis set. Enthalpies of formation for larger fluorocarbons estimated from the group additivity method compare well to enthalpies of formation found in the literature.     

Solid-phase extraction, separation, and visible spectrophotometric determination of trace amounts of iron in water samples.

A simple and reliable method is presented for the rapid extraction, separation, preconcentration, and determination of iron as its bathophenanthroline complex by the use of octadecylsilica membrane disks and spectrophotometry. We evaluted extraction efficiency, the influence of sample matrix, type and optimum amount of extractant, flow rates of sample solution and eluent, pH, amounts of bathophenanthroline and hydroxylamine hydrochloride, breakthrough volume, and limit of detection. We also studied the effects of various cationic interferences on percent recovery of iron. Complete elution of the complex from disks was obtained with a minimal amount of solvent. The limit of detection of the proposed method is 0.080 ppb. The method was applied to the recovery and determination of iron in natural waters.     

Spectroscopic investigations of solvent effect on chiral interactions

The spectrophotometric method was used to determine the mechanism of chiral interactions between a known chiral selector, tert-butyl carbamoylated quinine (t-BuCQN), and N-derivative amino acids (DNB-Leu). Results obtained on binding constants, free energy of binding (DeltaG), and difference in free energy of binding (DeltaDeltaG) values seem to suggest that there are three possible types of interactions between DNB-Leu and t-BuCQN: electrostatic interaction between the carboxylate group of the DNB-Leu and the ammonium group of the t-BuCQN, the donor-acceptor charge-transfer type of interaction between the (acceptor) aromatic group of the amino acid and the (donor) aromatic group of the t-BuCQN, and the hydrogen-bonding interaction between the amide group of the DNB-Leu and the carbonyl group of t-BuCQN. The strongest interaction will be observed if all of three interactions are in operation as in the case of DNB-Leu. The electrostatic interaction seems to play the dominant role in the interactions. While the charge-transfer interaction is relatively weaker, it seems, however, to be responsible for enantiomeric selectivity, namely, the closer the electron acceptor dinitrophenyl group is to the electron donor quinoline group, the higher is the enantiomeric selectivity. Specifically, in solvent with high polarity, both donor and acceptor are solvated by solvent molecules, thereby preventing them from being close. As a consequence, the interaction will be weaker and, hence, lower enantiomeric selectivity. Solvation will be less in less polar solvent which, in turn, leads to stronger interaction and higher enantiomeric selectivity.