Quantum-chemical simulation of interaction of polycaproamide with a lithium chloride solution in dimethylacetamide

Quantum-chemical calculations of interaction between lithium chloride and dimethylacetamide (DMAc) and between the polycaproamide model fragment CH₃NHCO(CH₂)₅NHCOCH₃ and a lithium chloride solution in DMAc were performed. The software package GAMESS with the MINI basis set was used in the calculations. Models of the solution included 2 LiCl molecules and 8–16 DMAc molecules. All of these models suggest three potential energy minimums corresponding to three stable structures that differ in the relative arrangement of lithium and chloride ions. A decrease in the amount of solvent in the system leads to transition from Li⁺(DMAc)₄Cl^- to Li⁺...Cl^-(DMAc)₃ and then to the (LiCl)₂(DMAc)₂ species, which crystallizes to form the 1: 1 crystal solvate. The mechanism of dissolution of polycaproamide in DMAc containing lithium chloride was refined.     

The cellulose solvent system N,N-dimethylacetamide/lithium chloride revisited: the effect of water on physicochemical properties and chemical stability

The water content in the binary systemN,N-dimethylacetamide/lithium chloride (DMAc/LiCl), acommon cellulose solvent, has been proven to be a crucial parameter. A quickdetermination of water content in DMAc based on the solvatochromism of aUV-active betain probe dye has been developed and validated. An analogousmethod, based on the solvatochromic fluorescence shift ofZelinskij's dye, which strongly depends on thesolventpolarity, was established for water determination in DMAc containing LiCl.Precise physicochemical data of the system DMAc/LiCl, such as density,viscosity, and conductivity, have been obtained. The limiting solubility forLiCl in absolute DMAc is 8.46 wt%. As shown by lightscattering experiments, water in DMAc/LiCl induces aggregation upon standingforlonger periods of time, which is even more prominent for diluted solutions andthose having a poor state of dissolution.     

SYNTHESIS AND CHARACTERISTICS OF NOVEL POLYAMIDES HAVING PENDENT N-PHENYL IMIDE GROUPS

We have investigated a novel monomer having a pendent phenyl imide group for preparing new cycloaliphatic-aromatic polyamides. Novel polyamides were synthesized by a direct polycondensation reaction of N-phenyl-2,3-imide cyclopentane-1,4-dicarboxylic acid (PCPA) and various aromatic diamines. A direct polycondensation was carried out by a Yamazaki's direct polycondensation that is typical of using triphenyl phosphite, lithium chloride, and pyridine. Inherent viscosity of these resulting polyamides was in the range 0.47–1.05 dL/g. The glass transition temperatures of these polyamides were in the range of 190–200°C. The decomposition temperatures of them were in the range of 310–323°C in nitrogen atmosphere. The Solubility of these polyamides are good in aprotic solvents such as DMAc (N,N-Dimethylacetamide), NMP (N-Methyl-2-Pyrrolidinone) and DMF (N,N-Dimethylformamide). Transparent, flexible, and tough films were cast from DMAc solutions.     

New solvent for polyrotaxane. I. Dimethylacetamide/lithium chloride (DMAc/LiCl) system for modification of polyrotaxane

Dimethylacetamide (DMAc) containing 8–9% (w/w) of lithium chloride (LiCl) or lithium bromide (LiBr) was found to be a good solvent for a polyrotaxane consisting of poly (ethylene glycol) (PEG) and α‐cyclodextrin (CD). In the new DMAc/LiCl solvent system, various modification reactions such as acetylation, direct dansylation, and reaction with acid chloride could be performed, which was unattainable in the previously reported solvents, i.e., dimethylsulfoxide (DMSO) and aqueous sodium hydroxide solution. Acetylation with acetic anhydride and direct dansylation of the polyrotaxane were investigated in detail in comparison with reactions in DMSO. The dissolution of the polyrotaxane in DMAc/LiCl suggested that the solubility and insolubility of the polyrotaxane is strongly in relation to the inter‐ and intramolecular hydrogen bonding of the polyrotaxane. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 532–538, 2006     

Investigation of the structure of cellulose in LiCl/DMAc solution and its gelation behavior by small-angle X-ray scattering measurements

Cellulose gels were prepared from cellulose in lithium chloride/N,N-dimethylacetamide (LiCl/DMAc) solution. When the cellulose concentration in the solution is above the one at which cellulose molecules overlap, cellulose gels were formed. While the gel prepared by the addition of water was turbid, the one prepared by the ion exchange was colorless, transparent, and optically anisotropic. In order to explain this gelation behavior of cellulose, small-angle X-ray scattering (SAXS) measurements of the cellulose solutions and the gels were performed. The SAXS profiles of the cellulose solutions and the gels suggested that the large-scale fluctuation of the molecular chain density in the solution can be the origin of the molecular aggregates formed in the gel. Furthermore, the differences in the structure of the gels at the macroscopic and the molecular level were discussed in terms of the phase separation and the molecular association.     

原生纤维素静电纺丝的调控

通过电纺非溶剂调控的纤维素溶液, 制备出纤维素电纺纤维. 在N,N-二甲基乙酰胺(DMAc)-氯化锂(LiCl)溶解纤维素体系中, 以DMAc和N,N-二甲基甲酰胺(DMF)作为非溶剂, 添加到高浓度的纤维素溶液中制备电纺溶液. 考察添加非溶剂对纤维素溶液性质和电纺纤维形貌的影响. 结果表明, 添加非溶剂有助于提升纤维素溶液的可纺浓度, 获得分散性较好的电纺纤维, 其中DMF效果最好. 添加非溶剂降低了纤维素溶液的黏度, 使纤维素溶液可纺浓度提高; 添加非溶剂改变了电纺溶液的稳定性, 获得了分散良好的纳米纤维, 从而有助于纤维素射流在电纺过程中快速固化成型.     

Cellulose-based fibers from liquid crystalline solutions. IV. Effects of lithium chloride on acetate/butyrate esters

Cellulose acetate butyrate (CAB) fibers were prepared by spinning from liquid crystalline (LC) solutions containing lithium chloride (LiCl). Ionic interactions were observed between carbonyl oxygen and lithium cation by ¹³C nuclear magnetic resonance (NMR) spectroscopy. Isotropization of the anisotropic phase by LiCl was found to cause a dramatic rise in the viscosity of LC solutions. The mechanosorptive creep behavior described earlier decreased in the presence of residual LiCl salt, possibly due to the formation of electrostatic interactions between Li⁺ and CAB backbone. © 1994 John Wiley & Sons, Inc.     

The physicochemical properties of the LiCl-CeCl3-H2O ternary system

The density, viscosity, refractive index, heat conductivity, heat capacity, and freezing temperature of the LiCl-CeCl₃-H₂O ternary system were experimentally determined over the lithium and cerium chloride concentration ranges 13–20 and 8–14 wt %, respectively, and the temperature range ?50–35°C. The densities and viscosities of the LiCl-CeCl₃-H₂O ternary system were calculated by various methods from the properties of binary solutions. The calculation results were compared with the experimental data. The possibilities and shortcomings of each of the methods used are discussed.     

Preparation and properties of polyamides and polymides containing bibenzyl,stilbene, and tolan structures

Polyisophthalamides and polyterephthalamides were prepared by the solution polycondensation of the corresponding diacyl chlorides with 4,4′-diaminobibenzyl, trans-4,4′-diaminostilbene, and 4,4′-diaminotolan in N,N-dimethylacetamide (DMAc). Polypyromellitimides were synthesized in two steps by the ring-opening polyaddition of pyromellitic dianhydride with the aromatic diamines in DMAc, followed by thermal cyclodehydration. The amorphous polyisophthalamides were soluble in some amide solvents containing lithium chloride, while the polyterephthalamides having fair degree of crystallinity were insoluble in these solvents. The thermal stability of these aromatic polymers decreased in the order of the tolan-containing polymers > the stilbene-containing polymers > the bibenzyl-containing polymers, both in air and under nitrogen.     

Synthesis and characterization of new polyesters based on 2,5-bis[(4-chloro carboxyanilino) carbonyl] pyridine and aromatic diols

<正>Six new polyesters 7a-f were synthesized through the solution polycondensation reaction of diacid chloride 5 with six aromatic diols 6a-f in N,N-dimethyl acetamide(DMAc) as solvent in the presence of pyridine as base.The polycondensation reaction produced a series of novel polyester containing pyridyl moiety in the main chain in high yields with inherent viscosities between 0.35 and 0.54 dL/g.The resulted polymers were fully characterized by means of FT-IR spectroscopy,elemental analyses,inherent viscosity and solubility tests.Thermal properties of these polymers were investigated by using thermal gravimetric analysis(TGA) and differentional thermal gravimetric(DTG).The glass-transition temperatures of these polyesters were recorded between 130 and 170℃by differential scanning calorimetry(DSC) and the 10%weight loss temperatures were ranging from 390 to 450℃under nitrogen.     

Aqueous solutions of a “green” ionic liquid and of lithium chloride compared and contrasted

Aqueous solutions of (a) a “green” ionic liquid and (b) lithium chloride are considered here. Proposals are made in respect to momentum transfer as characterized by shear viscosity, η. Arrhenius-type behavior as a function of temperature is contrasted with possible power-law form. More generally, η?is written as a product of mass density, the velocity of sound squared, and a characteristic time. Experiments are proposed for testing present ideas also involving the Debye–Hückel screening length.     

Preparation of cellulose hydrogels via self-assembly in DMAc/LiCl solutions and study of their properties

Cellulose-based hydrogels have been prepared from solutions of hardwood and flax lignocelluloses and cotton cellulose in an N,N-dimethylacetamide–lithium chloride (DMAc/LiCl) mixture by regeneration and subsequent self-assembly of cellulose chains. The main physicochemical characteristics of the hydrogels have been investigated. It has been shown that they can retain large amounts of water (up to 2500 wt %) and have high porosity and specific surface area. The studied hydrogels are classical stable 3D structures; however, unlike other hydrogels, they possess high stability in aqueous medium and irreversibility of gelation.     

Physicochemical and electrochemical properties of sulfolane solutions of lithium salts

The physicochemical and electrochemical properties (electrical conductivity, viscosity, density, and electrochemical stability) of sulfolane solutions of various lithium salts are studied. The nature of the anion considerably affects the physicochemical and electrochemical properties of the electrolyte systems considered. Sulfolane solutions of lithium salts have moderate electrical conductivity and high electrochemical stability, and can be used as electrolytes in lithium batteries.     

Aromatic rigid chain copolymers. I. Synthesis,structure, and solubility of phenyl-substituted para-linked aromatic random copolyamides

Four 2,5-biphenylene based difunctional condensation monomers, such as 2,5-diphenyldicar-boxylic acid or phenylterephthalic acid (PTA), 2,5-bis(carbonylimino-4-benzoic acid)biphenyl (2,5-BCIBABP), 2,5-diaminobiphenyl hydrochloride (2,5-DABP.HCl) and 2,5-bis(iminocarbonyl-4-benzoic acid)biphenyl (2,5-BICBABP), have been synthesized and characterized. These monomers were polymerized in combination with terephthalic acid (TA) and p-phenylenediamine (PPD) via the phosphorylation reaction to prepare a series of phenyl-substituted random copolyamides having all amide groups attached to para-positions of the benzene rings. All the copolyamides have been characterized by solubility, solution viscosity, and by differential scanning calorimetry (DSC). Some of these copolyamides have unusual solubility in organic solvents such as N,N-dimethylacetamide (DMAc) and N-methyl-2-pyrrolidinone (NMP) containing dissolved lithium chloride. A few copolyamides were tested for lyotropic behavior and found to form anisotropic solutions at critical concentrations in organic solvents. A randomly distributed unsymmetrical phenyl substituent on the benzene ring of para-oriented wholly aromatic polyamides dramatically changes the solubility and melting point. The phenyl substituent on a terephthalic acid unit is more efficient in decreasing melting point and increasing solubility in organic solvents of aromatic polyamides than the one on a p-phenylenediamine unit. However, the former also introduces a more flexible link in the extended polyamide chain.     

The residual amide content of cellulose sequentially solvent-exchanged and then vacuum-dried

Most celluloses are soluble in 8 mass % lithium chloride/N,N-dimethylacetamide (LiCl/DMAc) and/or 8 mass % LiCl/1,3-dimethyl-2-imidazolidinone (LiCl/DMI) with solvent-exchange treatment from water to DMAc or DMI through acetone. In this study, the residual DMAc or DMI adsorbed on celluloses after the solvent-exchange and then vacuum-drying at 60 °C for 48 h was determined by UV spectroscopy and elementary analysis. Significant amounts of DMI or DMAc remain in the solvent-exchanged celluloses even after vacuum drying: about 1.2 mmol/g and 1.0 mmol/g for DMI and DMAc, respectively. Thus, corrections of molecular-mass parameters of celluloses, which were reported in previous literatures based on the assumption that no residual amides are present in the solvent-exchanged and then vacuum-dried celluloses, are needed.     

四元体系LiCl-KCl-MgCl2-H2O 25℃时等温研究

本文首次报道了四元体系LiCl-KCl-MgCl₂-H₂O 25℃时的溶度和饱和溶液的折光率、密度和粘度值。并给出了体系的相图、溶度面、总氯量面及上述物理性质面。     

Cellulose solutions in dipolar aprotic solvents

Preparation conditions and properties of cellulose solutions in DMAA containing 7–8% lithium chloride are considered. Investigation of the optical anisotropy and structure of cellulose solutions in this solvent confirms that the LS state is attained with an increase in the concentration of cellulose. On the basis of these cellulose solutions, fibers not ranking below viscose fibers in mechanical properties are prepared. The use of a mixed solution of 95% cellulose and 5% poly(amidobenzimidazole) in DMAA containing 7% lithium chloride makes it possible to prepare films and fibers whose strength is more than two times greater than the strength of cellulose hydrate fibers. The deformation-driven orientation and supramolecular structure of fibers and films are studied by spectroscopy and small-angle scattering of polarized light.     

Physicochemical properties of 1,2-epoxycyclopentane

Temperature dependences of density, viscosity, and saturated vapor pressure of 1,2-epoxycyclopentane were studied and approximated by interpolation equations. Its refraction index and chromato-mass-spectroscopy data are given.

     

New poly(amide-imide)s syntheses. VII. Preparation and properties of poly(amide-imide)s derived from 1,5-bis(4-aminophenoxy) naphthalene,trimellitic anhydride,and various aromatic diamines

New bis(phenoxy)naphthalene-containing poly(amide-imide)s having an inherent viscosity in the range of 0.62–1.09 dL/g were prepared by the direct polycondensation of 1,5-bis(4-trimellitimidophenoxy) naphthalene ( I ) and various aromatic diamines using triphenyl phosphite and pyridine as condensing agents in N-methyl-2-pyrrolidone (NMP) in the presence of calcium chloride. The diimide-diacid (I) was prepared by the condensation of 1,5-bis(4-aminophenoxy) naphthalene and trimellitic anhydride. Most of the polymers were soluble in aprotic solvents such as NMP and N,N-dimethylacetamide (DMAc), and afforded transparent, flexible and tough films upon casting from DMAc solutions. Measurements of wide-angle X-ray diffraction revealed that those polymers containing p-phenylene or oxyphenylene groups were characterized as crystalline polymers. Tensile strength and initial moduli of the polymer films ranged from 61–86 MPa and 1.83–2.21 GPa, respectively. Glass transition temperatures of the polymers were in the range of 231–340°C. The melting points of the crystalline polymers ranged from 375–430°C. The 10% weight loss temperatures were above 512°C in nitrogen and 481°C in air. © 1993 John Wiley & Sons, Inc.     

Characterization of cellulose by SEC-MALLS

Norway spruce (Picea abies) cellulose samplesdissolved in lithium chloride/N,N-dimethyl-acetamide(LiCl/DMAc) covering a wide range of average molecular weights were analyzed bysize exclusion chromatography (SEC) and multi-angle laser light detection(MALLS). The molecular weight distribution of the samples was compared to themolecular weight distribution of cotton linters cellulose samples. To obtaincomplete dissolution of high-molecular-weight wood cellulose, previouslypublished procedures for dissolving cellulose in LiCl/DMAc were modified. SECseparation was performed using macroporous monodisperse polymer particles ascolumn matrix. The refractive index increment (dn/dc) forcellulose in 0.5% LiCl/DMAc was found to be 0.104. The radius of gyration,R_G, of cellulose in 0.5% LiCl/DMAc depended on the molecular weight,M, according to the relation R_G M^0.55. Celluloseprepared from sprucewood by the sulfite cooking process had a broad molecularweight distribution compared to cotton linters cellulose.