白光LED用SrAl_2Si_2O_8∶Eu~(2+)荧光粉的制备与发光性能研究

采用高温固相法制备了SrAl2Si2O8∶Eu2+系列荧光粉,研究了灼烧温度以及助熔剂硼酸浓度和激活剂Eu2+离子浓度对发光性能的影响,研究了SrAl2Si2O8的微结构。结果表明,以3.0wt%H3BO3为助熔剂,在1250℃灼烧3h可制备发光性能优良的SrAl2Si2O8∶Eu2+荧光粉,Eu2+离子的最佳掺杂浓度为2.5mol%,Eu2+离子浓度过大时的浓度猝灭是由电偶极-电四极之间的相互作用引起的。SrAl2Si2O8∶Eu2+的激发和发射光谱均为宽带谱,在280～380nm光的激发下,可发射峰值波长位于429nm的蓝色光。     

Sr2Si5N8∶Eu2+荧光粉的制备与发光性能

以α-Si₃N₄,SrCO₃,Eu₂O₃为原料,采用碳热还原氮化法制备了Sr₂Si₅N₈∶Eu²⁺荧光粉。研究了材料的结构与光谱特性,分析了影响材料发光性能的工艺因素。结果表明,石墨粉含量和助熔剂的用量对Sr₂Si₅N₈相的形成和发光性能有重要影响。当n_C/n_Sr=1.5,助熔剂用量为4wt%时,合成样品的主晶相为正交晶系Sr₂Si₅N₈,在400~550 nm可见光激发下,可发射峰值波长位于609 nm荧光。激发带的位置与Eu²⁺离子浓度无关,为400~550 nm之间的宽带激发;但发射强度随Eu²⁺离子浓度的增加而增加,Eu²⁺离子浓度达到5mol%时发射强度达最大值,在Eu²⁺离子浓度为2mol%~5mol%之间,观察到发射峰的红移现象。     

Sr2CeO4:Eu,Gd的微波合成与荧光性质

用微波法合成了Gd3 和Eu3 共掺杂的Sr2CeO4荧光体.Gd3 对Sr2CeO4:Eu的发光起不同的作用:当Eu3 浓度较低(掺杂浓度为1 mol%)时,Gd3 离子起猝灭作用;当Eu3 浓度较高(掺杂浓度为8 mol%)时,Gd3 离子起敏化作用,尤其是Gd3 离子掺杂浓度为3 mol%时,Eu3 的5D0→7F2(614 nm)跃迁发射增强为Sr2CeO4:Eu荧光强度的145%.     

Ca10(Si2O7)3Cl2:Eu2+Mn2+单-基质白光荧光粉的发光性质

用高温固相法合成了颜色可调的Ca10(Si2O7)3Cl2:Eu2+Mn2+荧光粉.研究了它的发光性质和Eu2+与Mn2+之间的能量传递.Eu2+离子在Ca10(Si2O7)3Cl2晶体中形成了峰值为426 nm和523 nm的5d→4f跃迁发光,Eu2+中心向Mn2+中心传递能量,敏化Mn2+离子4T1(4G)-6A1(6S)跃迁而产生585 nm的黄光发射.黄绿蓝3个发射带叠加在单一基质中实现了白光发射.3个发射带的激发谱范围位于250-480 nm处,Ca10(Si2O7)3Cl2:Eu2+Mn2+在紫外-近紫外波段(350～410 nm)范围内有很强的激发,是一种适合InGaN管芯激发的单一基质白光LED荧光粉.     

Sr~(2+(置换对Eu~(2+)掺杂钙长石晶体结构和光谱特性的影响

采用高温固相法在弱还原气氛下制备了Ca0.955-xSrxAl2Si2O8:Eu2+(x=0~0.9)系列荧光粉,研究了Sr2+置换Ca2+对晶体结构和光谱特性的影响。Sr2+进入CaAl2Si2O8晶格与Ca2+发生类质同相替代形成连续固溶体,物相从CaAl2Si2O8相(Triclinic,P1)逐渐转换为SrAl2Si2O8相(Monoclinic,I2/c),晶胞参数a,b,c和晶胞体积都随Sr2+置换量呈线性增加,α,β和γ在置换量为0.1~0.7区间缓慢减小,超过0.7后呈线性急剧减小。位于250~410 nm区间的宽带激发光谱由4个激发峰构成,表观峰值位于356 nm。Eu2+占据两种格位形成两个发光中心,分别产生430和468 nm发射,宽带发射光谱位于390~550 nm区间,呈现近白色发光。控制Sr2+含量可使表观发射峰位置在408~434 nm之间移动,强度随Sr2+含量增加而增强。     

Sr_2SiO_4:Eu~(3+)荧光粉的燃烧法制备及其发光性能的研究

利用H3BO3作为助熔剂、尿素为燃料,采用燃烧法成功制备了发光性能良好的Sr2SiO4:Eu3+红色荧光粉,通过X射线衍射和荧光分光光度计对样品进行了表征。实验结果表明:Sr2SiO4:Eu3+荧光粉的衍射峰发生了偏移,晶格常数减小,Eu3+的加入使得晶格发生了收缩;同时发现H3BO3的加入有利于α′-Sr2SiO4纯相的形成和(211)晶面的生长;选择H3BO3(1%,2%,3%,5%(质量分数))做助熔剂,有效地提高了Sr2SiO4:Eu3+荧光粉的发光强度;H3BO3用量从1%增加到3%时,位于5D1→7F3跃迁的587 nm的发射峰和5D0→7F2跃迁的622 nm的发射峰逐渐增强。     

Sr4Al14O25:Eu2+长余辉发光材料浓度淬灭研究

采用固相法制备Sr4Al14O25∶Eu2 长余辉发光粉体. 研究了Eu2 离子在铝酸盐基体中的发光行为以及浓度淬灭过程与淬灭机制. 结果表明, Eu2 在基体中形成两种不同发光中心, 分别为Eu1和Eu2, 具有不同的配位数. 在紫外光激发后, 发射波长分别为400 nm和486 nm. Eu2 离子在Sr4Al14O25中的浓度淬灭包含两个不同的淬灭过程. 随着Eu2 离子浓度的增大, Eu1格位的发光通过将能量传递给Eu2而产生淬灭现象. 随着Eu2 离子浓度的继续增大, Eu2格位的发光通过将能量传递给周围晶格缺陷而淬灭. 从实验和理论计算的结果来看, Eu2 离子在Sr4Al14O25∶Eu2 中的能量传递方式有两种, 一是光能的重吸收, 二是通过电子偶极-偶极作用交互方式传递能量.     

SrSi2O2N2∶Eu2+荧光粉的制备及性能研究

以SrCO3,Si3N4,Eu2O3为原料,在N2气氛下,采用自还原高温固相法制备了SrSi2O2N2:Eu2+荧光粉。研究了该荧光粉的物相结构、发光性能和晶体形貌,同时对比在不同气氛下合成的荧光粉。结果表明,在N2气氛与N2/H2气氛下分别合成的SrSi2O2N2:Eu2+荧光粉物相结构和光谱特性基本一致。显示出合成了主晶相SrSi2O2N2,但还含有少量未知的中间项。Eu2+浓度的变化不影响激发状态,而发射光谱的波长在Eu2+浓度为1mol%-20mol%之间,从530 nm的绿光红移至550 nm的黄绿光区域。同时,激发光谱覆盖的范围宽,均能有效的被UV或蓝光激发,这意味着该类荧光粉在白光LED方面有可能得到广泛的应用。     

Sr2SiO4:Eu3+发光材料的制备及其光谱特性

采用溶胶-凝胶法制备了Sr2SiO4:Eu3+发光材料. 测量了Sr2SiO4:Eu3+材料的激发与发射光谱, 发射光谱主峰位于618 nm处;监测618 nm发射峰时, 所得激发光谱主峰分别为320、397、464 和518 nm. 研究了Sr2SiO4:Eu3+材料在618 nm的主发射峰强度随Eu3+浓度的变化情况. 结果显示, 随Eu3+浓度的增大, 发射峰强度先增大; 当Eu3+浓度为7%时(x), 峰值强度最大; 而后随Eu3+浓度的增大, 峰值强度减小. 在Eu3+浓度为7%的情况下, 研究了电荷补偿剂Li+的掺杂浓度(x(Li+))对Sr2SiO4:Eu3+材料发射光谱强度的影响. 结果显示, 随x(Li+)的增大, 材料发射光谱强度先增大后减小, 当x(Li+)为8%时, 峰值强度最大.     

NaF助熔剂对Sr2MgSi2O7:Eu2+,Zr4+荧光粉结构及发光性能影响

在还原性气氛下采用高温固相法合成了适合近紫外(λex=375 nm)激发的光致发光蓝色荧光粉Sr2MgSi2O7:Eu2+,Zr4+,研究了NaF助熔剂对Sr2MgSi2O7:Eu2+,Zr4+荧光粉晶体结构、颗粒形貌及发光性能影响。结果表明:适量的NaF助熔剂有利于样品的晶化,所获得样品的颗粒形貌更加规整,能有效降低中间粒径(D50)并控制粒径分布;只含中间颗粒(D50)样品的发光强度高于含全颗粒样品的发光强度;NaF助熔剂最佳添加含量为6%(质量分数),可使样品的发光强度提高446%;掺杂适量的Zr4+有利于样品的发光强度的提高,最后探索NaF助熔剂及掺杂Zr4+离子提高发光性能的机制。     

Sc2MgGa2 and Y2MgGa2

Scandium magnesium gallide, Sc₂MgGa₂, and yttrium magnesium gallide, Y₂MgGa₂, were synthesized from the corresponding elements by heating under an argon atmosphere in an induction furnace. These intermetallic compounds crystallize in the tetragonal Mo₂FeB₂‐type structure. All three crystallographically unique atoms occupy special positions and the site symmetries of (Sc/Y, Ga) and Mg are m2m and 4/m, respectively. The coordinations around Sc/Y, Mg and Ga are pentagonal (Sc/Y), tetragonal (Mg) and triangular (Ga) prisms, with four (Mg) or three (Ga) additional capping atoms leading to the coordination numbers [10], [8+4] and [6+3], respectively. The crystal structure of Sc₂MgGa₂ was determined from single‐crystal diffraction intensities and the isostructural Y₂MgGa₂ was identified from powder diffraction data.     

The alkali hypophosphites KH2PO2, RbH2PO2 and CsH2PO2

The structures of the hypophosphites KH₂PO₂ (potassium hypophosphite), RbH₂PO₂ (rubidium hypophosphite) and CsH₂PO₂ (caesium hypophosphite) have been determined by single‐crystal X‐ray diffraction. The structures consist of layers of alkali cations and hypophosphite anions, with the latter bridging four cations within the same layer. The Rb and Cs hypophosphites are isomorphous.     

Electrochemical study of (NEt4)2Cl2FeS2MoS2 and (NEt4)2Cl2FeS2MoS2FeCl2

Summary The ability of [MoS₄]^2–, anions to be used as ligands for transition metal ions has been widely demonstrated, especially with Fe²⁺. The present study has been restricted to linear complexes such as (NEt₄)₂ [Cl₂FeS₂MoS₂] and (NEt₄)₂[Cl₂FeS₂MoS₂FeCl₂]. Their electrochemical properties are described: upon electrochemical reduction, these compounds yield MoS₂, as a black precipitate, and an iron complex in solution, assumed to be [SFeCl₂]^2–. The electrochemical reduction goes through two electron transfers, coupled with the breakdown of the molecular skeleton: a DISPl and an ECE mechanism. Depending on the solvent, the following equilibrium may be observed: [Cl₄Fe₂MoS₄]^2–[Cl₂FeMoS₄]^2–+FeCl₂. The equilibrium constant, K_D, was evaluated by differential pulse polarography. K_D is tightly related to the donor number of the solvent.     

Zur Kenntnis der Dialkalimetalldichalkogenide β-Na2S2, K2S2, α-Rb2S2, β-Rb2S2, K2Se2, Rb2Se2, α-K2Te2, β-K2Te2 und Rb2Te2

On Dialkali Metal Dichalcogenides β-Na₂S₂, K₂S₂, α-Rb₂S₂, β-Rb₂S₂, K₂Se₂, Rb₂Se₂, α-K₂Te₂, β-K₂Te₂ and Rb₂Te₂ The first presentation of pure samples of α- and β-Rb₂S₂, α- and β-K₂Te₂, and Rb₂Te₂ is described. Using single crystals of K₂S₂ and K₂Se₂, received by ammonothermal synthesis, the structure of the Na₂O₂ type and by using single crystals of β-Na₂S₂ and β-K₂Te₂ the Li₂O₂ type structure will be refined. By combined investigations with temperature-dependent Guinier-, neutron diffraction-, thermal analysis, and Raman-spectroscopy the nature of the monotropic phase transition from the Na₂O₂ type to the Li₂O₂ type will be explained by means of the examples α-/β-Na₂S₂ and α-/β-K₂Te₂. A further case of dimorphic condition as well as the monotropic phase transition of α- and β-Rb₂S₂ is presented. The existing areas of the structure fields of the dialkali metal dichalcogenides are limited by the model of the polar covalence.     

Formal [(2+2)+2] and [(2+2)+(2+2)] nonconjugated dienediyne cascade cycloadditions

[reaction: see text] Fluoranthene 2 and heptacycle 3 are easily accessible from the reaction of diyne 1 and norbornadiene (NBD) in the presence of the rhodium catalyst. The unusual [(2+2)+(2+2)] adduct 3 was confirmed by the X-ray crystal structure analysis.     

Crystal Structures of [Bu2Sn(O2PPh2)2], [Ph2Sn(O2PPh2)2], and [PhClSn(O2PPh2)OMe]2. Raman Spectra of [Ph2Sn(O2PPh2)2] and [PhClSn(O2PPh2)OMe]2

[(n‐Bu)₂Sn(O₂PPh₂)₂] ( 1 ), and [Ph₂Sn(O₂PPh₂)₂] ( 2 ) have been synthesized by the reactions of R₂SnCl₂ (R=n‐Bu, Ph) with HO₂PPh₂ in Methanol. From the reaction of Ph₂SnCl₂ with diphenylphosphinic acid a third product [PhClSn(O₂PPh₂)OMe]₂ ( 3 ) could be isolated. X‐ray diffraction studies show 1 to crystallize in the monoclinic space group P2₁/c with a = 1303.7(1) pm, b = 2286.9(2) pm, c = 1063.1(1) pm, β = 94.383(6)°, and Z = 4. 2 crystallizes triclinic in the space group , the cell parameters being a = 1293.2(2) pm, b = 1478.5(4) pm, c = 1507.2(3) pm, α = 98.86(3)°, β = 109.63(2)°, γ = 114.88(2)°, and Z = 2. Both compounds form arrays of eight‐membered rings (SnOPO)₂ linked at the tin atoms to form chains of infinite length. The dimer 3 consists of a like ring, in which the tin atoms are bridged by methoxo groups. It crystallizes triclinic in space group with a = 946.4(1) pm, b = 963.7(1) pm, c = 1174.2(1) pm, α = 82.495(6)°, β = 66.451(6)°, γ = 74.922(6)°, and Z = 1 for the dimer. The Raman spectra of 2 and 3 are given and discussed.     

Die Photoionenspektren von SCl2, S2Cl2 und S2Br2

Photoionization Mass Spectra of SCl₂, S₂Cl₂, and S₂Br₂ Photoionization mass spectra of SCl₂, S₂Cl₂, and S₂Br₂ have been measured. Heats of formation, bond energies, and ionization potentials of fragments have been calculated from appearance potentials.